I haven't used NV surround in over 7 years! Does is still suck?

It has been over 7 years since the last time I used an NV Surround type of setup... lets get these monitors hooked up and tested!
Design your dream setup with V1 Tech! - v1tech.com/?re...
Get your JayzTwoCents Merch Here! - www.jayztwocen...
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2Jayz...

[@JamieStuff]

I love these "low effort" videos that you do when wrapping up a daily series. Some information, some problem solving, and a whole lot of just having fun. A great end to the year.

[@giftig694]

all of them are low@@biggestthreattoyourexistence

[@OnePuncheonMan]

the hinge doesnt have to be on the upright, you can bolt them on the horizontal piece, slide the left and right monitor outward to get more angle on them and put the bbolt back in

[@rwbrygel]

100% this! It would also be wise to search for the FoV calculator, input your screen dimensions and distance from screen and that will give you your ideal side screens angle and in-game FoV values.

[@goonie1975]

Yes please do this, it is doing my head in looking at the way you have those monitors setup, also they are way to high.

[@Zee20Ate]

Those corner brackets aren’t needed either. Can be mounted directly to the horizontal piece the same way the side monitor arms are mounted to the angle bracket.

[@OnePuncheonMan]

The problem starts with the horizontal piece which should’ve been mounted on the front face of the upright and then mount the hinge directly onto the horizontal piece

[@rwbrygel]

I'm starting to think they maybe possibly, quite by chance... Didn't read the instructions!.. lol

[@GimpyChinaman]

The gap between displays is from those extra spacers you put in - the center monitor is farther "out in front" than the frame was designed for it to be.

[@dkman123]

He also said that the arms suck out the sides because they support larger monitors. So larger monitors might touch at the middle with the arms anchored properly. A hacksaw would also trim those edges if they really annoy you.

[@xSolomonG]

So I have the same rig, It's actually because they mounted the arms to the uprights. That's what the instructions say to do but is only necessary for the largest possible screen size. If you pause at 6.24 you will see what I mean. The outermost two bolts are on the vertical member of the stand which prevents you from changing how far apart they are. If you can't move the arms in and out there is only one angle that works for each size of monitor and you might have to take out the inner bolts like they did.

[@MikePruszkowski]

Get Content Manager!! So much to be explored on there. Love that Jay actually adjusted the brake correctly. Single most overlooked improvement is pedal deadzone and curve. So much to be quickly gained there

[@davecamyt]

Its great to see someone with such a passionate following bringing more attention to our wierd hobby 😁

[@mrpurple1901]

Dave cam is in the house. Happy New years mate

[@adhdturtle37]

Hi Dave!

[@davecamyt]

@@mrpurple1901 happy new year mate 😁

[@davecamyt]

@@adhdturtle37 hey 😁

[@MaxDad7]

Late Happy New Years, Dave! It's nice to see other creators I follow around and about. :)

[@clevelandbeemersimsports]

Nice to see the sim racing content! You may want to take another look at your monitor mounting options. You are absolutely right in that the TK monitor mount was made with curved and larger format monitors in mind. In reality you need something a bit smaller as there are a few issues with your config. One issue is your monitor angles are very shallow. Typically you want approximately 60° with 32” monitors. Getting this angle right will significantly improve FOV and immersion. The second issue that goes along with getting the angle right is to get the monitors closer to your eyes. The closer you get the monitors the better the immersion and the more natural your view will be. Looking at you driving, the wheel is too far away. You want your elbows to be bent at approximately a 45° angle for proper control and to help prevent shoulder injury over time. Moving the wheel deck closer will allow you to get the monitors closer as well. Just a few tips. No need to take my word for it. Take a look at the major sim racing KZbinrs setups. Check out Dave Cam, Dan Suzuki, Basic Ollie, and Boosted Media and really look at their setup ergonomics and where the monitors are positioned. Hope you guys enjoy the rig! You’re rocking some awesome hardware.

[@Beanasaurus_Flex]

Agreed, FOV, calibrated FFB and driving position would help a ton. Dan Suzuki has some great content.

[@SpaceMyName]

Is it too late to suggest right angle DP adapters to help the cable fit? Love the shenanigans with angle grinding the plate.

[@AlphaMachina]

The moment I saw that, I looked on Amazon and found them.. lol

[@BobbyMcGeePhoto]

I bought 3 32" LG monitors on Black Friday just like jay and had the EXACT same issue as Jay, I tried ordering 90 degree adapters, and like Jay, tried spacers, but ultimately came to the conclusion that these "solutions" were not real solutions at all and ultimately decided the real issue was a poor choice of monitor becasue of it design limitations. My solutoon was to exchange the monitors for HP Omen 32" and have been happy ever since.

[@FellowshipOfTheAviatorZ]

Is it possible/would it be better to have a much wider center screen? Really thinking about getting a similar setup as you and Jay here but the screen dimensions just look off to me. Would there be an aspect ratio or stretching issue having 2 smaller outer screens but one wider screen in the center?

[@Edgemaster72]

@@FellowshipOfTheAviatorZ I've seen mention of people with multi monitor setups at different resolutions getting stuttering issues especially when trying to run at higher refresh rates, don't know if that's an old problem or what though

[@forcedhard6681]

@@FellowshipOfTheAviatorZ I have run 32" with 27" wings with Eyefinity, no sweat. I always buy same resolution. Smaller sides don't bother me because it is mostly for peripheral vision when driving.

[@rwbrygel]

Nvidia Surround is not required.. If you're going to be using Assetto Corsa, you'd be better off getting Content Manager.. Which is a rabbit hole in itself but makes modding the game a lot easier and features triple screen setup in its display options.

[@psychotictwitch]

Love how I was going to say something about Content Manager but looks like someone beat me to it 😂

[@42LGK]

i started using assetto corsa in vr just a month ago and coming from flight sims, content manager is GREAT and self axplanatory tbh, wish we had something for MSFS too

[@blacknovella]

def a rabbit hole.. and i love it.

[@rwbrygel]

@@psychotictwitch Anyone who starts playing AC needs to be told about it asap.. Should be bundled with the game now tbph!

[@eddyd.105]

Beat me too it lol I haven't seen the og assetto screen in years it made me cringe

[@StimulationSimulated]

Please use content manager and custom shaders patch you will have so much more improved options... And the amount of extras in game using csp apps is a game changer

[@zerodelay1630]

AC without Content Manager is so wrong

[@glendavis3183]

You need the Simlab Vario Vesa monitor mounts. They’re way more lo-pro and super adjustable. The only way to go for triples.

[@joejefferson]

Those mounts are fantastic though they’re not gonna help since the entire monitor stand is assembled incorrectly. The cross brace goes on the front of the uprights not in between them. The side arm brackets bolt directly to the cross brace not to hanging 90 degree brackets like they did. I wouldn’t be surprised if the next time they go into the studio studio those monitors are sitting on the ground in pieces

[@v3c7r0n]

Happy New Year guys! Definitely an awesome setup! If the schedule permits, once you've had some time to dial in the new setup and put it through it's paces, I would actually be very interested in a surround versus VR comparison, though I recognize that's going to vary wildly game to game. Some game ideas for the new setup, though you will want a flight stick/HOTAS for most of these: Flight sims - MS Flight Sim (any version), DCS World, IL2 Sturmovik, Ace Combat Space sims - Star Wars Squadrons, Elite Dangerous, Star Citizen, No Man's Sky Other - Mechwarrior 5 or MechWarrior Online (not sure if either support NV surround), Farming Simulator (don't knock it till you try it, it's fun and chill), Snowrunner (the most infuriating relaxing game you'll ever play), World of Warships (Not a joke, I actually wonder how it would play in surround if it works with it), and of course Battlefield 4 (you know you want an excuse to blow the dust off of it, Jay!)

[@bradbrowatzke7236]

I know I like your thinking here. I have the Flight Stick/HOTAS combo, which I bought for MSFS, DCS, and all Mechwarrior. I am curious to see the others, as I suggested last video for things like the Farming Sim, different construction sims, etc. I have to check out Snowrunner. Jay playing Battlefield 4 on this would be interesting too.

[@chriscruthirds345]

I love that you document every aggravation I would go through. Seriously makes me more humble and realize everyone goes through that....

[@pmx360]

For the triple monitor 32” or under you should choose the 80mm center profile. I did the opposite mistake, i choosed the 80mm instead of the 120mm for triple 42” oled tvs.

[@jeffbaker4219]

Will that stand hold 3 x 50" TVs? Been looking all over for something that will, and this looks like it would work.

[@pmx360]

@@jeffbaker4219 1200mm will go up to 47.25”, boostedmedia have 3x65” but i dont know what brand of triple tv free stand he uses.

[@HeyGoat79]

I had a Jay sighting at Microcenter today! Happy new year! New PC up and running thanks to these videos.

[@tf330129]

I want to see Phil's reaction when he finds out what they did to make the hdmi cable fit :)

[@elsimdrifting]

Majority of the sim racing wheel uses Simhub to setup the screen and leds, it is also a good all around software to have that can control pretty much any sim racing accessories, i use it to control my DIY bass shakers, DDU, Center console display, rev lights, leds on my wheel and so much. For playing AC on pc, you gotta have Control Manager which basically gonna be your all in one launcher, along with CSP and Pure/Sol which makes AC 10x better. Installing mods like cars and tracks are a breeze with it just drag and drop the compressed file and install.

[@willmind4296]

Wauw the radius of the monitors is huge! I would want it much more surrounding me. (As I have, from the top of my head: 68 degrees?) You should slide the side monitors out further so you can shorten the angle

[@truthbeacon]

I would be curious about how Flight Sim would feel on this vs in VR.

[@via_negativa6183]

Or you can have the best of both worlds and use this with 3D vision like I do but at this point finding the hardware is half the battle.

[@LeafBoye]

​@@via_negativa61833d Vision? You mean head trackers that turn the screen when you move your head? At that point why not just get a cheap quest 2 or something and not have to setup or troubleshoot when it breaks?

[@TheCrazyCanuck420]

I used to get accused of hacking in war thunder playing across three Titans and three 30" 2560x1600 monitors. When planes thought they were getting the jump on me I'd draw them in flying in one direction, but watching the enemy approach on the far left or right monitor. First person shooters were a pain to play at 7680x1600 when two big vertical bezels in the middle.

[@truthbeacon]

@@TheCrazyCanuck420 My biggest problem with multi-monitor setups is getting the monitors nicely aligned to eachother, and bezels... The rig in the video doesn't look like it fixes the bezels issue, but does fix the alignment issue. Might be good enough versus the hassle of a VR setup.

[@artins90]

VR will always win because it allows for depth perception and correct world scale.

[@TWEEKL]

I'm happy to see that monitors I choose to go with, after a lot of research, were choosen to be in this. The monitor arms I went with I didn't have an issue with the cables but glad to see what issue I could have if I want to go with this kind of setup.

[@JDM_UK]

So excited for you to have a triple screen setup. I've not long just set mine up. Cant wait for you to do some benchmarks with triple screens. Much needed in the sim racing community 😁

[@chloedevereaux1801]

damn gurl, ive had a triple screen set up for years...... ITS NOT A NEW THING.........

[@JDM_UK]

@@chloedevereaux1801 what do you want? A medal?

[@3vil8unny]

I love seeing Coconut Back with Jay the way things were always supposed to be best friends forever

[@FEzio78]

For AC : Contact manger - CSP (the payed version for Rain) - Sol / Pure For Sim racing devices Wheel for example : Sim Hub For more immersion while racing : Crew Chief

[@shinjisan2015]

the extra bit of rail sticking out is the perfect place to mount the speakers :)

[@ahuman5592]

Jay's gonna be real mad when he learns about 90 degree display port adapters

[@VampirusX]

I just commented the same 😂😂😂😂 So funny! Everyone: Solutions exit. Jay: Solution exit. Yes.

[@TheGr8Ox]

Move the monitor bracket down the arm which will allow the pivoting of the external arms. This will in turn allow the flat monitors to come closer in view. And you will gain that second bolt back.

[@ke5wpl]

Literally just got my first wheel and pedals to play AC. So glad i can mod in my favorite cars and tracks.

[@DesuVR]

This is why super ultrawide and VR exists.

[@MrThamahn]

VR Yes!!!! 3 monitors show more than super ultrawide. But super ultrawide is easier to setup.

[@Justume]

Jay, you see a problem; I'm seeing someone gifted with problem solving and, believe it or not, this trial of yours is demonstrating just how to make a difficult thing work. I hope you get that chop saw and fix the arm. You induced me to look at curved monitors, a wished for expensive item on my tiny retirement income. I have just a simple home build, super budget, desktop on which I can, in my old age, comfortably play my games. Great video, and you and your erstwhile cameraman are the best! HAPPY NEW YEAR TO ALL THE TEAM!

[@dirkgently8102]

Jay, awesome video! Please put some thick tape or smooth down the side you cut from the plate behind the monitors. Someone puts their hand behind to undo the cable will instantly slice their hand open.

[@kcscustom9759]

This is great lol, I’ve literally done the exact same thing! I as well have used nylon spacers and long M4 bolts to mount monitors in a way that wouldn’t absolutely frick the cables. I’ve done the same thing with a large flatscreen tv too actually, to keep the HDMI out of the wall.

[@MichiganBassMan]

ARKON Mounts Square VESA 75/ VESA 100 adapter plate, on Amazon for anyone that doesn’t have the tools to cut the plate. I had this same issue mounting my LG Ultragear 49, power was completely covered by the simlab plate and I got lucky finding one that works with the aluminum slots.

[@magnuslestat]

i use NV Surround for ETS 2 with face track wich works like a treat. Later in the year i'm going to try my hand on a flight-sim and see how that works.

[@Zee20Ate]

Get rid of the corner brackets where the side arm mounts to the center monitor arm. You can see the “angle bracket” is bolted directly to the left/right side arms. It can be bolted the same way to the center monitor horizontal arm.

[@Zee20Ate]

Where can I send you guys pics to my setup using same rig?

[@jpalasz123]

That would be the best Christmas gift spending a day doing sim racing with you three.. Would be the best day ever..

[@foley209]

Invest in a bandsaw for cleaner cuts and you can cut the length of all 3 horizontal bars to get the monitors closer together

[@PsychoStreak]

Right angle DP cables or adapters would have helped with the monitor setup. But it's clearly geared towards bigger screens as well as curved monitors.

[@KaosABC123]

I just print the mounts I need so I can add and remove material for the monitor I want to use. Pretty slick and can find all the stuff you need at Micro Center still.

[@timdempsey3219]

Switch the brackets from side to side. Left on right and right on left. It will shorten the extra and also close the gap.

[@UnknownEntity420]

I've just started getting back in to sim racing (still entry level g29 setup, will upgrade to moza stuffs in near future) and I'm absolutely loving this content! love to see what others are doing with their setups and learn a thing or two along the way! As others have mentioned, Content Manager for Assetto Corsa is a must! Such a game changer and makes modding soooo easy. Anyways, keep up the great work. I look forward to what comes next. Happy new year Jay, Phil and Nick!

[@bodasafur6078]

Yo , from an ex moza user i am going to offer you advice i never had the benefit of . I have no idea what your budget is and moza looks a viable solution based on value but it WILL! Cost you alot more in the long run if you buy moza .i owned the r5 bundle and the r9 with a gs wheel and srp pedals both were nice setups and felt decent to use but moza have lets say interesting quirks . The bases get excessively hot after a very breif period of driving especially on AC and ACC maybe its the way the ffb is delivered to the base but after one race the base had to be left to cool or the ffb would be cut to control the heat both are not good , the nm values you are sold are quite overstated yes you may get breif monents of the advertised value but not often , now lets deal with moza support, in a word terrible ! I had an issue with the r9 base which had to be sent to their repair center this took 2 months to sort out, they can take weeks at a time to respond to an email conersation (not good for your emotions) i paid shipping for my items return which i was told i would be refunded(i wasnt) was all a horrible experience . The software and firmware updates are intent on killing your equipment every update is a lottery if the base will still function as before ( mine changed one update and i could never enjoy it again from that point it never felt as it did prior to the update) after less than 12 months and spending about 1700£ on the two bundles i sold it all at a loss i got 1050£ back and re invested in the asetek la prima bundle i had to add another 400£ to buy this so now in total i was down 2100£ to get a setup which is vastly superior to the moza setup in quality and feeling . You will end up uograding if you go moza so with all sincerity i will save you that hassle and say go simagic alpha mini or asetek or the new csl dd which is just realeasing. You spend a little more upfront but save yourself money,stress time in the long run . Ive opened the door to you its upto you if you walk through it.

[@UnknownEntity420]

@@bodasafur6078 I appreciate the detailed experience/feedback, definitely something I'll look into more. Budget-wise idk really.. moza became appealing because as you said it seems like pretty good value compared to a lot of the market and I've heard a few good words about their bases. They were also on a real good sale just recently near me but I see now that's finished :') maybe it's a good thing lol. Was mainly interested in the moza R12 with I think it was the rs V2 wheel and still hadn't 100% decided what pedals as I heard mixed reviews about srp and CRP pedals. Will dive down the rabbit hole again 😂

[@bodasafur6078]

You are welcome , its worth noting that jay has already swapped from moza to simucube it looks like ,these guys had all moza last time i saw them using it now suddenly not. Its very telling .

[@UnknownEntity420]

@@bodasafur6078 yeah I had noticed that. Though I don't recall him mentioning having any problems with moza (at least in this vid) which also says a little

[@bodasafur6078]

@@UnknownEntity420 yeah im not saying his stuff broke but either way he felt he needed different/better gear which goes to my point you will want to upgrade sooner or later im trying to suggest through experience its easier to buy wise first time

[@andytokley6220]

To get more angles on your monitor 1) move the outside screens further out on the outboard arms 2) slide the outboard arms further in on the central arm attachment You should aim for 50-60degress for full immersion On Assetto Corsa 1) select triple screen 2) when sat in the car in “drive” move the mouse to far right side and open triple screen menu 3) input the angles and distances to correct the image distortion to outboard screens and get correct FOV

[@scub_bubbles1183]

awesome way to end 2023 Jay. Happy new year to you Phil and Nick!\

[@JakeVirdenTech]

Happy New Year JTC Team!! I do enjoy the SIM videos if you guys have more you can upload!

[@BenSmith-ds1zy]

I have the same monitors and a trak racer triple mount rig too. So glad it wasn't just me who found it infuriating how LG placed ports and even frustrates the best of us. I used extenders on the bolt fittings but still had to use 90⁰ adaptors to get cables in (don't have a grinder to hand or would done what you did lol). Lot of hassle but worth it once up and running

[@BlaXXXima]

Have similar monitors on a Sim-Lab trip stand, and bought 90 degree cables. Only way to get it to work (Vario Vesa Mount). Great thinking LG!! :P

[@VampirusX]

*Angle adapters exist* Jay: Let's grind and make way for the cable 😈

[@Mospeada76]

Jay, you could use the aluminum frame poking out on each end to mount speakers. Happy New Years!

[@Monarchias]

I think it's not the best Idea, due to the magnets are in those speakers would be to close to the screen. And it might affect the view and colors because of the magnetic field.

[@YayDanMan]

Okay so 2 HUGE things Jay and Nick on the monitor stand since you're new to triple screens: 1. 5:30 - You did this backwards! Move the monitors on the side arms out towards the ends of those arms, set the angle you want in the slot on those angle brackets for the side arms, then slide the side monitors back towards the centre to eliminate the gaps as best as possible! Greater angle for the side arms = mathematical FoV will be higher = greater sense of speed and immersion since the screens wrap towards the seat more 2. 12:45 - single screen means the game window is rendered from a single camera viewpoint, which distorts the image on the side monitors since the camera can't capture such a wide FoV correctly, regardless of whether you're using Surround or not (as there are many games, including Assetto Corsa, that do not require Surround for triple screen functionality), you should have selected triple screen for the Rendering Mode so the image on the side monitors won't be distorted! Otherwise, uh Happy New Year JTC crew

[@Valfaun]

i'm not into racing games, but that's a really nice setup. i think if i were to assemble something like this i'd just settle for a single curved 32:9 screen

[@willlive6845]

A 34 inch ultrawide is perfect. I used triples , and VR and the 34 inch oled is 100 percent the best option

[@Weyco23]

I’m using a 48” OLED, I love it.

[@Keeper69s]

32" Curved Samsung is at Walmart for $179 on clearance where I'm at. Has no issues with cable management around vesa mounts.

[@Matt43]

I've had to get REALLY creative with aluminum profile on my rig, but its setup for driving and flying with a ~30 second switchover time (no yoke though, just HOSAST space flight)

[@Xilent1]

So badass. These guys have so much fun. LOVE it and the setup

[@moshiez]

Just on the monitor mounts you have each side monitor at a very shallow angle which is why those bolts wont go in either side. Might be better off with a sharper angle like 56 degrees this will help periferal vision when racing too. Also take a look at a program called resize raccoon it's a god send for setting up tripples

[@mike6889]

Would like to see you do some more sim rig builds in various budget ranges and compare them to your ultimate one. Also, would be cool to see a multi-purpose sim rig and how easy to interchange between racing and flight.

[@Mr_jz_12]

Rig itself Trak racer tr120. Then choose Moza for entry or simucube higher end for wheel base/wheels. Then either Sim jack pro for entry, moza for middle of the range, simucube/asatek/heuisinkveld for high end pedals.

[@Mr_jz_12]

Rig itself Trak racer tr120. Then choose Moza for entry or simucube higher end for wheel base/wheels. Then either Sim jack pro for entry, moza for middle of the range, simucube/asatek/heuisinkveld for high end pedals.

[@kennethporst4359]

This is AWESOME 👍👍 I recommend Full Surround sound 👍

[@siopao_81]

if you slide the monitors on the arms out further on the arms away from the center monitor, you can have more angle and the bevels will touch and close the gap \ _ / or \_/ instead of _ _ _ Ideally, you want your side mirrors for peripheral view.

[@johnja9017]

If anyone is wondering, they mounted the L bracket wrong. This will cause issues with lining up the monitors.

[@TheChrisglasgow]

I had an nvidia 3d surround setup back in the day it was absolutely amazing

[@krazyeye5147]

Hey Jay just wanted to let you know VR in MSFS is now quite doable and dare I say good. You do need top end pc hardware for a really good experience. The key is to set everything up to run through OpenXR.

[@dbunik44]

I have the very same model of monitor, what an upgrade it was from my VGA

[@Boozerbear]

That triple monitor stand is for 50" screens that's why it doesn't fit those 32" screens, it's also why the back plates were so much larger than you needed.

[@TYahn91942]

Happy New Year guys. That was fun watching the competition for the best lap time and I would have done the same thing with the angle grinder.

[@RandyWatson80]

move your side brackets out to change the degree...then lower your monitors till your head is in the center or roughly below

[@mikeyearly]

With AC use Content Manager for better features including a really good triple monitor setup utility

[@jacobsecor5015]

so, as far as monitor positioning, you don't need to do anything with the bolts where they attach, you just push the monitor vesa section outwards and then rotate the assembly more inwards. In that case, you actually wouldn't see the ends either. (source, same setup in the room with me rn)

[@TracksideViews]

It’s all I’ve ever used with triple screens in iRacing and it’s never been a problem

[@RogerRogerEngineering]

at 1:45 you mention flying in your racing sim... I'm working on a solution for the "pitch" problem you mentioned ;)

[@Var5h]

The arm mount for the monitor mount can be moved in off of the upright so you can get the monitor closer to the center one.

[@Guardian_Arias]

I imagine the reason why you have aluminum extrusions everywhere is so you can use the T-slots to slide in and out the brackets the monitors mount onto. If they pre drilled holes instead of including T-Nuts then one thats awful for how much you paid and two just buy some t-nuts.

[@Guardian_Arias]

Its like watching a Crew Chief trying to do MX at times, It hurts.

[@DNFplays]

one tip. assetto corsa (ac) is the best with content manager

[@svpracer98]

Interesting choice to go with the triples... I went to a 4k, 55" or 65" lg nanoled panel.

[@KasperXplore]

Jay, it would be awesome to do a Sim rig with the Xeneon Flex Displays! Might be $$$ tho

[@damontcs]

Triple monitor Warframe is pretty wild, and runs surprisingly well on my 3 x 1440p monitors with a 3080 card. Might be something to try out.

[@thundr_monkey]

Leguna Seca is one of my favorite tracks from my childhood, it might have been over taken by Circuit De Spa-Francorchamps and Suzuka

[@RazzeTech]

You should put speakers on the arms that are sticking out, maybe 3D-print a mount?

[@NickCharles]

You know what would be crazy? If someone managed to build a 360 degree monitor stand for use with something akin to a Virtuix Omni (or maybe a low tech swivel chair), so you could have "virtual" VR with the ability to turn in any direction you wished.

[@John_1920]

12:16 The wallpapers aren't screwed up, they middle screen is the middle part of the wallpaper, and the side screens are the sides of the middle screen's wallpaper, perfectly aligned with the middle screen's wallpaper's lines stretching outward. It looks to me like the wallpaper is designed for multiple monitors.

[@Wh1terider]

VR for flight simming is not terrible, its preference. My only hang up is having large amounts of cash wrapped up in I/O controls. VR DCS is amazing. AR /MR is getting much better hang in there.

[@roeoneill9158]

You should get the simlab vario besa monitor mounts, then u can individually tweak the without moving the whole arm!

[@CMDRSweeper]

NV Surround and Eyefinity are great technologies! Any flight sim or racing sim on them are great!

[@f1o7x9]

You guys need the sim lap monitor mounts. Best thing I got for my simulator

[@yam1desu]

What a great way to wrap up the year! Happy New Year JTC team! Thank you for another entertaining year. Recommendation: Make whatever you want, I love watching all of your formats of content because I watch more for you being a knowledgeable goofball than any particular type of content.

[@LigerZeroES]

It would be awesome if you show / make a video on how to build a decent simulator setup.

[@KrytopsyX]

4:20 I had to re-watch that part multiple times to make sure I understood all of it. 😄

[@lilcheeps6147]

It really amazes me that LG Samsung have not made a screen that wraps around you for the simulator crowd it would be so nice to have a seamless wraparound screen

[@lawyer4ever]

I totally can feel that pain setting up triples, have done it many times over the last decade I have been into serious sim racing. That is partly why I generally prefer VR, although VR has its own issues. Setting up the three monitors and getting them properly lined up can be very difficult. I never would recommend it for a new sim racer.

[@ConfusedRaccoon]

The arm sticking out the side is for accessories... like a fan, or another, smaller screen with Radar readouts, proximity flashers or something. You need to find some of those Gigabyte Bezel hider thingys.

[@JasonDias]

When you properly set up the monitors in the sim they will have a much steeper angle surrounding more of your head, that will force the monitors to be further out on the arms and allow you to put the screw back in and use the designed amount of angle

[@anonymoususer7985]

Just need a Adia64 screen in the bottom left of the setup and if you go into windows 11 display you can drag the screen to the bottom or top corner of the screens and away; it will detach the sensor screen from the other displays so it can’t interfere

[@the_holy_forestfairy]

Some use a wider Monitor in the middle to simulate the Windshield and to square the Image. As it is now, it looks good, but seems somehow squished in the middle...

[@pbodyjel87]

I have the same monitors with a track racer triple stand.. I'm saying this to help.. hopefully you take it positively fellow enthusiasts! But if you mount the angle bracket for the side monitors on the bar parallel to the ground ( same bar the center monitor is mounted..) you will gain the ability to give your setup the proper angles. It's how mine is mounted. Good looking rig.. and looking forward the sim racing bug biting you more and you guys sharing your journey!! Congrats by the way.

[@ChikoDc_Tv]

Happy New Year to your team! I wish for a 2024 with even more good stuff from you and for you to continue growing as fast as you can, as you have shown us in the past years. From a loyal listener in Quebec, Canada. Yanick

[@vanrumt01]

great work using the Sim-Lab stuff

[@LumenateTV]

this setup with 3 LG 49" 49GR85DC would be epic.

[@johnnyballbag8916]

Had the same clearance issue with my LG monitors and just jigsawed a notch out of the plates. Been using nv surround for years without an issue. However their bloody drivers are a different matter all together!

[@WhiskeyOnFire]

Love the content, but. For optimal FOV you would rather want the outside edges of the side monitors at the same "depth" as your eyes. you need WAY more angle on the side monitors. That would also put the side monitors further out on the side arms

[@Rene_Bo]

Good work! I struggled with surround, very unstable. I run iracing with native triples instead

[@JasonOwensJLO]

Need more angle in the monitors, that's the problem you have with the pivots

[@DragonKastle]

NVIDIA surround with 3 27 inch screens is heaven. Been playing all games like that for over 10 years . 7680 by 2560. Glorious.

[@fokjohnpainkiller]

It would be nice if windows could still detect the 3 separate monitors for browsing and day to day work after enabling surround

[@Ravenx217]

just use windows powertoys and setup zones

[@NavySeal2k]

Use fences or similar software to have virtual desktops on your virtual monitor ;P

[@stanley3647]

I using surround (3x1 setup) for years. With 3 monitors and surround on, windows enlarging app window to single monitor size, when drag window into top edge (of desired monitor) if You clikck "full screen" on app - this will be enlarged into 3 screens. It is very smart - i never turn off surround option. When You need gaming only on one monitor - Only need to turn off "full screen mode" in game menu and drag game into top edge of monitor You wanna play.

[@JoakimBidebo-t9g]

Should have move the monitors to some other holes in the plate, so they would go of center and more to the middle monitor and if that doesn't work just drill some new holes.

[@RaiseTheRufus1992]

Need to adjust the angles of the screens probably somewhere in between 55-60 degrees for the perfect FOV