How to: Ford Fusion fog light install

[@randellgribben9772]

as a tech,, this the best video on how to remove the front bumper cover

[@trevormoore4198]

Except u don't meet to remove bolts in wheel well just pins

[@MrDoItAll91]

I know this is an old video but it’s a Great video and well explained. I recently purchased a super duper base model 2015 Fusion SE 2.5L. Basic as hell lol but low miles for a great price from an elderly neighbor of mine. 4inch basic ass screen 😂 with no fog lights 🙄 no window tints no nothing just basic 🤣 Nicest thing on the car was the unscratched black paint and an immaculate black interior 😊… Had the car 4 months and I’ve been all over eBay and Amazon looking for affordable mods. Found this fog light setup, harness and switch. I literally just got done with installation and all went well with the help from your video. I didn’t order the OE Harness or Switch but I will be soon just to clean it up a bit and make it look nice! Thanks man

[@xXTheChosen-1Xx]

This video helped out a tremendous amount. I just wanted to say thank you! My fog lights came out great.

[@Pelon15569]

Wanted to say Thank You,I just finished installing fog lights on my 16 Fusion Se,took me about 2 hours,taking my time,lol ordered switch,harness from ebay & fog light kit from amazon,just waiting on LED lights to replace the 1's that came in the kit, Thank you for showing OEM part number's to order.

[@jimmypachecofeliciano3145]

My fusion had no fog lights and was looking for a video like this thank you

[@aaronplatt8714]

Outstanding video…clear explanation and good camera work. I just finished this job and it was as easy as could be. Thanks for the correct part numbers as well! The lights I ordered from eBay came with the bolts and clips to secure them, so no need for zip ties.

[@xXTheChosen-1Xx]

Do you mind sharing the light kit you bought from eBay?

[@jerrybuchanan9161]

Good video. Music adds absolutely nothing other than making it difficult to hear you at times.

[@RvaJay]

+Jerry Buchanan Thanks for the feedback. I was debating on the music. For the next video I'll lower the volume

[@jrzarate713]

😂😂😂

[@D-Major_Beats]

Good video. Some stuff was hard to see. Due camera being so close but overall I got it. Thanks

[@BossSpringsteen69]

@@RvaJay no music. Plus, it make video edits a little quicker.

[@ScottyP5947]

Great man, thank you very much. I plan to do this with my wife's 2016 Fusion. Great to hear you don't need to add a non-factory switch.

[@texassherman7093]

How’d it go? I’m looking at doing this for my ‘16 Fusion as well

[@andykolbin1783]

Thank you so much for this video. I did exactly what you said, bought all the parts and installed this morning in around 1 and 1/2 hours. I'm sure you saved me a lot of money if I had the dealer do it.

[@RvaJay]

Glad I could help. The stealership would definitely charge you an arm and a leg

[@tomatofire919]

Did you have to purchase the fog light bezels RH&LH, bracket RH&LH and the lights together as a package or each separately?

[@RvaJay]

The kits should include all the hardware you need, (at least mine did). You only need to buy the harness and the switch for the inside.

[@tomatofire919]

Thanks for the reply Jay. . .It's probably been awhile since you ordered and installed your "kit" but could you possibly send me the information where you received yours? Just e-mail me. Thanks!

[@RvaJay]

It was a kit from eBay. They’re several available. You can also check amazon. Try to find a complete kit.

[@jacqueg4369]

Great video!! I want fog light on my 2013 Ford Fusion S. You make it look so easy. Thanks for the video on how to install.

[@RvaJay]

Thanks, it’s pretty easy. It’s just way more complicated than it needed to be thanks to ford.

[@stangster87]

Great job and awesome video man! Car looks so much better with the fog lights.

[@ThePlowboy27]

Rock smashed my glass on my driver's side fog light, seems pretty easy to remove and reinstall, thanks for sharing brother. F the music I thought it was great!

[@johnhermann7013]

Edited very well 👍

[@bernardpfife179]

did you forget to show how and where to connect the new fog light wiring harness? I seem to have missed that part.

[@RvaJay]

The new harness plugs into the same location that the old one did. The only thing different is the 2 additional plugs for the fog light themselves.

[@Montypython24]

And where would those two be plugged into

[@hoseabanks1241]

Hey Bra, grt vid. Apologies, but maybe I'm thick. You're saying the new lights connect to the harness then to the switch. Then how will the other things work that's on the switch. Is there another wire connection somewhere not covered in the vid?

[@banksta241]

Thank you for the instructional video. I probably would have broke something without your help, Lol thank you.

[@nohemoglibin8677]

Thanks man. The Ford fog lights are made of a real brittle plastic. Mine got smashed by a rock on the interstate.

[@dillon4700]

Its happened twice to mine same side

[@xXTheChosen-1Xx]

How are they holding up? Are the zip ties still holding the fog lights in place? Great video. Appreciate you making this. - This is like the only video on how to do this.

[@eanras16]

Thank you 4 this video i followed n successfully installed fog lamps on my fusion

[@xXTheChosen-1Xx]

Will the light indicator for the foglights turn on once you install the new switch and wire harness?

[@jekxc2264]

I didnt see the wiring process good how did u set the fog lights up to the battery?

[@eanras16]

Thank you bruh. I followed your instructions and successfully installed fog lamps 🔦 into my fusion, I even changed the 💡to colors led

[@josephfrank1472]

Thanks good Video, how much were the lights?

[@TennisGvy]

Nice, clear, and detailed. Thanks a lot!

[@maglife105]

Great video!!! You make it look simple and easy. That’s prime!

[@troygarrett2748]

Great Video. I appreciate you explaining each step. Thanks!

[@kezug]

Great instructional video. Can you give an estimate on the cost of the parts needed? Thank you

[@RalphHampson-t8c]

I know this is an old video but how do you know if you need the one that ends in a b or c

[@aliahimed2888]

Could you show us how to connect the harness please

[@RvaJay]

The new harness is a direct replacement for the old harness. Just swap them out.

[@rogercastellanos8155]

Great video thank you so much man 🤘🏾

[@nickrindlisbacher6553]

Did you have to order a separate wire harness for it? Or is that the one that comes with it

[@sethjohnson6753]

U do need a new wiring harness the one equipped with fog lights wires it’s about 90 bucks if u get it from a ford dealership

[@nickrindlisbacher6553]

@Seth Johnson which harness do I need to get ? My ford is a 2014 fusion se no fog lights

[@hoseabanks1241]

Hey Bra, grt vid. Apologies, but maybe I'm thick. You're saying the new lights connect to the harness then to the switch. Then how will the other things work that's on the switch. Is there another wire connection somewhere not covered in the vid?

[@RvaJay]

The beauty of using Oem Ford parts. The new switch only adds the connections and the button for the fogs. Everything else on the on the button is the same

[@trevormoore4198]

Did u have to forscan to work?and have indicator on dash?

[@RvaJay]

Forscan will make the indicator work

[@samchad7041]

Thank you soooo much for the video I have 2018 Fusion without foglight and i live in Minnesota, but do you know if anyone have the light for my specific year?

[@RvaJay]

You're welcome, remember to subscribe because I'll be doing more how to videos featuring the Fusion.

[@ryandaniels2686]

If you already got the fog lights housing on your car and all you want to do is replaced the housing would u just have to plug and play instead of buying all the extra stuff? I already got fogs lights but I want to add those LED housings and would I have to connect those to a harness?

[@RvaJay]

If your car already has fogs, you don't need anything else but the new led part. You will have to wire the leds in to come on with the running lights.

[@ryandaniels2686]

RvaJay u mean wire the led fog piece to the headlight harness?

[@RvaJay]

@@ryandaniels2686 Yeah, if your talking about installing the housings with the led running lights, you'll need to tap into something that has power when the car is on.

[@krinklekuts8394]

2:29 That blue clip you removed from the small black box, I am missing that box so my fog lights can't be set up. I am having difficulties finding that item online without a part number or a name of the product. Any help you could provide as to what part that is would be greatly appreciated. Thank You.

[@RvaJay]

I'm not sure what that part is, when I get some free time I'll look into it.

[@krinklekuts8394]

@@RvaJay I appreciate it. The previous owner before me must've taken it out and didn't replace it.

[@rubenjohnson1863]

@@RvaJay when you find out the part please let me know

[@BizzyDotarachi]

Does it show on the dash when u have the fog lights on?

[@jareklalain747]

Thank you soon much man!! I've been looking at how to do this and this video was the best and most helpful by far!

[@RvaJay]

Thank you man. I appreciate that!

[@henrylendechemonsalvo4587]

@@RvaJay Hi, sorry, I also put the ami fusion 2014 fog lights on it, but they didn't turn on. I bought everything you showed in the video.

[@carly20]

Where did you get the fog lights please?

[@Mr.Towboater87]

So those plugs that you unplugged from the car that is attached to the bumper are now on the new harness? So the harness that's on the bumper is no longer needed?

[@jackchamberlain8131]

yes

[@Mr.Towboater87]

@@jackchamberlain8131 sweet thank you

[@truenexus1usa]

Good work! Did you need to Control Module programmed to make the lights work? Would you please list the part numbers for the all Ford parts up in your comments above like after the list of tools? Did you end up needing parts not seen in your video?

[@RvaJay]

I didn’t need anything else. I showed everything I used in the video, I’ll put the part numbers in the description. Thanks for the support

[@ricosuava21]

You posted 1 year later that the chrome inside the fog lights melted. I found a good fix for that problem. Yeah it's a $130ish fix but FOG LIGHT - Ford (4F9Z-15200-AA) that's the part number you need that will bolt right into the assembly kit you got and that's a Motorcraft part so you know it will work right.

[@RvaJay]

I talked about it in the top speed video, but I’m not 100% sure when they burnt up, but I know they didn’t last long. Thanks for the part number. I think it’s about time I upgraded my fogs lol.

[@ricosuava21]

@@RvaJay all you need is the small assembly everything else is useable by the factory part and thank you for the video because I am a newspaper carrier and I use my fusion for work and the last 2 days (time of replying) has been fog hell but I'm very curious what you thought about your night time driving with LEDs in your factory headlamps. I'm using the silverstar zxe golds and their amazing but because of my job I'm changing bulbs ever 3-4 months and I'm sick of ripping my front bumper off every 3-4 months just to change bulbs I dont have a garage so man.......its cold as hell or hot as hell in Oklahoma.....I'm curious about the throw distance of the LEDs because I do alot of playing dodge the deers and boar and I need something that has good distance plus lasts a long time

[@RvaJay]

@@ricosuava21 The LEDs have been good to me so far, and I haven't had any issues. I'll do a video and compare my head lights and a car with factory LEDs. There's not much difference.

[@ricosuava21]

@@RvaJay oh I mean more like the vision distance like how far can you normally see is it better than what it used to be or is it about the same

[@juanpena2487]

Does it work the same for a Ford Focus

[@tavarichMETTI]

Genius !!! My Ranger 2020 are exactly the same process

[@RebelliousNation]

Do you have the exact links to the wiring harness and the other part for in the car? And will those parts gif on a 2016 Ford Fusion?

[@redihoxha2940]

Where do you take the power in the front bumper?

[@RvaJay]

You don’t need to take power anywhere. Just replace the original harness with the new one.

[@redihoxha2940]

@@RvaJay and then where to plug for the power?

[@jackchamberlain8131]

@@redihoxha2940 one of the plugs that he disconnected, its the bigger one, thats what powers it.

[@mopargemini8615]

Where can you buy the whole set up? Meaning everything you are showing

[@4099cal]

Yo jay great Video bro thank you so much...one question tho what fog light kit did you use and did you get it from ford?

[@RvaJay]

The kit I got from eBay. Everything fit but the light didn’t last. I would definitely upgrade those

[@4099cal]

@@RvaJay ....tell you the truth I didnt think it would ...it wss like 4 or 6 months right lol am probably gonna do led lights hopefully it adds a bit more visibility to the road at night.

[@chrisdutra1380]

I called the Ford dealership and they asked for my Vin and said even with the wire harness and switch the fog light wouldn't work and that I'd have to splice in some where for it to work. I'm gonna assume from your previous comment it's about the fog light indicator on the dash that there saying won't work unless I splice in. Also going to assume you has to put a fuse in the fuse box for them to be used.

[@RvaJay]

+chris dutra The dealership uses the vin to look up specific part numbers. You are correct though you'd probably have to splice some wires to get the dash light to work, it wasn't a big deal to me so I didn't worry about it. You don't need to add a fuse or anything else to make the fogs work.

[@chrisdutra1380]

Rapid Jay the part number for the wire harness was the $33 correct

[@chrisdutra1380]

Rapid Jay thanks boss for the info. Also I see you have good taste in sport bikes. I ride a 2013 R1

[@RvaJay]

chris dutra I'm not sure on the dealership price, I got my harness and light switch from a seller on eBay. Good choice! I love mine

[@mrussomain]

Some feedback I found regarding the dash indicator light (would probably be safest if Ford service performed this): kzbin.info/www/bejne/paG8qmCbq5lkj6s

[@centurionwilliams8765]

Thank u sir for your video🙏🏾

[@christiangatsby4792]

Hello mate, i have the same car, just want to knoe if you had any problems in the past years, with your car maybe any flickering with the install of the fog lights. Your answer is important because I knoe our cars are very complicated, and I just don't want to mess up my fusion

[@bivanrodriguezf8377]

Hi. After hardware installation, do you need to program something (w/forscan) to turn them on?

[@RvaJay]

No, they’ll work as long as you use the factory switch.

[@kckrol85]

Hey man, The bolt above the clips in the fender liner. Is that the only bolt needed to pull out the sides. Or is there another clip under there. I'm talking about where the fender and front cover meet. Thanks

[@RvaJay]

I don't remember exactly, there's not much holding the fender liner on though.

[@gilberkins7752]

Good video, Sir. Very informative.

[@Geminicarluv21]

Where do go to get the wiring harness

[@jackchamberlain8131]

google the part number. got mine from ebay

[@erikgeffert2551]

How much does everything cost all together wanting to do this so bad to mine!

[@RvaJay]

The whole project was around 160. It really depends on which fogs you go with.

[@joepayne3924]

Question? I bought a Spyder Fog light kit like the one you installed. It came with a harness. Will that work with a factory switch if I buy it

[@RvaJay]

I don’t think so, I think you need the factory harness to work with the switch

[@jhonnymoros9041]

I have this question.... am little confuse because I buy the Fog lights kit on EBay and brought Wired harness. Do you know if I need to install all that? My fusion is 2016 SE

[@RvaJay]

Yes. You need the interior switch too.

[@jhonnymoros9041]

Ok thanks. I got Factory switch

[@AChocolateStarr]

I got a 15' Focus that I want to install fog lights on. The set I'm looking at is on eBay too. Will it be the exact same way as yours? It looks like it to me 🤔 because the Focus is just lil smaller. I have the exact Same light switch on the side.

[@RvaJay]

I'd imagine the install would be similar. Ford is fairly consistent. They use the same light switch in many cars.

[@blazesimpson8830]

Rapid Jay can you install Led lights on a 2016 Ford Edge SE, and what is that about having to splice somewhere?

[@SouthernRailfan01]

Was there any way in particular you were able to remove the push clips from the inside of the fender lining without breaking them? I didn’t want to pull of the rest after already snapping one leg off of one of the clips.

[@RvaJay]

I used a flat head screwdriver, they do make a special panel tool that you can use as well.

[@DJShyn3]

Hi the fog kit you have linked to is that the complete kit and I don’t need to buy anything else? Thanks for the great tutorial video!

[@RvaJay]

You will still need the harness and fog light switch

[@DJShyn3]

Thanks my man!

[@kwameoppong-koduah8133]

I just got my foglight kits from eBay. Where can I order the cables and the switch, what are the correct names and do you have link to share so I can place an order for the cables?

[@RvaJay]

I got everything from ebay

[@Matrixito]

Do u know if I can replace my 2014 Fusion fog lights with these 2017s New kind fog lights? The 2014 are this Round ones and the new style are kinda square/rectangular style, but I don't know if the new ones will fit

[@RvaJay]

Im not sure. I haven't seen the back of the newer style to see if the plug is the same

[@stangster87]

Do all fusions have the wiring in the switch (once you replace it) so it’s all plug and play?

[@RvaJay]

I've heard that the "s" model might not be prewired. Mine is an "SE"

[@DJShyn3]

How did you route the fog light switch wiring harness ? Did you fish thru behind the original switch box? Thanks

[@RvaJay]

The switch is basically plug n play. All you have to do is replace the harness behind the bumper for it to work

[@jacobcobb4778]

Since you used zip ties to hold the fog brackets to the bezel/bumper do you have any issue with the lights bouncing or rattling because they aren’t fastened with bolts?

[@RvaJay]

I haven’t heard any noise to this day. Zip ties work great

[@bigdawgs94]

Do you know if this is possible with a 2020 Fusion SE, to transfer the fog lights over and put the LED titanium headlights in?

[@faiztender3501]

Nice video, I like to upgrade from sync 1 to sync 2, any help please

[@RvaJay]

That's a project I want to do, it's pretty low on my list though.

[@levihanson9102]

Do you need 2 fog light wire harness?

[@terryglanville4628]

Is there a way to find a part number for the fog light kit...I got the #'s for the switch and the harness. Just not sure which fog lights will work.

[@theman5887]

Unless Ford sells them as a set in their accessories subdomain, then you'll have to buy the pieces separately.

[@jimmyforg1653]

You're awesome I'm about to do the same thing I appreciate you wholeheartedly thanks again a thousand times

[@RvaJay]

Glad I could help

[@PatientZero_]

How did ya get the grille black?

[@RvaJay]

Plasti-dip

[@PatientZero_]

@@RvaJay Gotcha. I already have the dip just wondering if it was spray pain how black it is. What brand ya use?

[@RvaJay]

@@PatientZero_ I used a the rattle can made by Plasti-Dip. I took the whole grill out (since I had the bumper off) and painted it. I did an update video on the grill so you can see how it held up kzbin.info/www/bejne/l2GtioWJpruSqpI

[@levani33331]

hi DG9Z-15K867-B This cable is connected outside temperature sensor and hood sensor?

[@RvaJay]

Yes

[@levani33331]

@@RvaJay thank you

[@coochiecrook7120]

I have the foglight switch.....but no foglights!

[@APPSTEREVIEWLUTION]

you never showed the wiring setup. I have the light and everything set up but the wiring idk how to install.

[@RvaJay]

+steve cuevas There isn't any wiring with this setup. All you have to do is remove the harness that's already there and replace it with the new one

[@mrussomain]

Great vids, thanks! So re the harness, even if the car came without fogs (like yours) there is still a harness in there that you remove and replace with this new one?

[@juanvillagomez2327]

Hey would this work on a 2018 model Ford Fusion se

[@RvaJay]

I’m not sure. Ford may have changed something. I imagine it would work though.

[@coolissimo69]

Good video.

[@حسين-خ7ف3ب]

good video I like it this videos . Thank you very much

[@andykolbin1783]

Where did you buy the fog lights from?

[@RvaJay]

eBay

[@tomatofire919]

Do you need to purchase the bezels separately or is there a complete kit available with bezels, brackets and lights?

[@bdahlin97]

Awesome Video. Do you think I could connect with you an ask you a few questions? I'm looking to do the same thing to my Fusion but circumstances are a little different! Would love a message back!

[@josephwoodland1544]

Can i call them direct for these parts

[@RvaJay]

Yeah, just tell them the part numbers and they should be able to get them for you.

[@Lady_Tism]

I literally cannot get this damn cord unattached from the bumper. 😕

[@gilberthernandez5183]

Where did you get the brackets from

[@RvaJay]

The whole kit I got from eBay.

[@gilberthernandez5183]

You have a link

[@RvaJay]

I don't have a link, just search on ebay. All those kit are about the same.

[@Mahandshurt]

So the frame already there and they just didn't give me fog lights ...

[@RvaJay]

The bracket comes with the fog light kit

[@bernardpfife179]

and where do the other two plug into?

[@RvaJay]

The other two plugs go to the fog lights. Everything else should be the same

[@jacobcobb4778]

These aren’t OEM bezels are they? Are they ebay knockoffs?

[@RvaJay]

Correct those are the knockoffs. They fit pretty good.

[@jacobcobb4778]

Thanks for the reply Jay! I had ordered some from eBay thinking the whole set was OEM but I was lied to lol. Not sure I want to keep them or just shell out the cash for the OEM ones

[@jacobcobb4778]

Also, how is the output of the fog lights? Would you say it’s equal to OEM ones?

[@RvaJay]

I did an update in another video, but the fogs themselves are junk. Everything else is fine, and I wouldn’t recommend oem for anything else but the lights.

[@Liltreydog96]

Did you have to order that switch separately or did it come with the fog lights?

[@RvaJay]

Ordered separately. The kit is Chinese made. The switch is made by Ford.

[@stevo091]

Would of been easier to unscrew the fog lights from the front.

[@RvaJay]

? There aren’t any screws on the front.

[@EduardoGonzalez317]

Would you have the eBay link for the harness you got?

[@RvaJay]

The harness is listed as 2013-2015 Ford Fusion Parking Fog Light Distance Control Wire Harness OEM NEW. Jst make sure it has the letter B or C or the end of the part number and it'll work. Btw, it was $27 shipped

[@andrewmac3720]

@@RvaJay Just paid 94 USD for harness there not easy to find in Canada good thing on your video it shows the Ford part number thanks my friend I'm about to get fig lights in Thanks for the Vidio and part numbers

[@martindemeter4379]

I hear mnusic not what you saying 👍

[@michaelwoods7458]

Redo this video without the distraction

[@stephenthatcher8355]

Where does the pigtail into the vehicle

[@RvaJay]

The car is already pre wired. All you need to do is swap in the new bumper harness and fog light switch.

[@javiermarquez2137]

Why the music? Also can’t understand 1/2 of what u said. Must have not been important.

[@deasiaamos9934]

Why in the world would they make it so dam hard to get the the light 🤬

[@RvaJay]

I think they do it so people have to come to the dealership and pay them to do it

[@cameronh8811]

Why add music? It makes absolutely no sense.

[@RvaJay]

It made perfect sense. This was one of my first videos, and I wanted to add some flare. Clearly I made the wrong choice lol.

[@Morokkan1]

Ford manufacturer got to be the dumbest car manufacturer out there...nothing is easy with them and I mean NOTHING

[@RvaJay]

They make sure everything unnecessarily difficult. Gotta take the bumper off to change a headlight? Then they try to charge you $400.

[@13cardenk]

Music in video is annoying asf

[@RalphHampson-t8c]

I know this is an old video but how do you know if you need the one that ends in a b or c

[@sayid534]

where do u plug in the harness?

[@RvaJay]

Follow along where the factory harness goes and replace it with the new one.

[@RalphHampson-t8c]

I know this is an old video but how do you know if you need the one that ends in a b or c