Tap to unmute

Jeep Wrangler 6.4 Hemi Swap Wiring and ECM

  Рет қаралды 54,400

JK Gear and Gadgets

JK Gear and Gadgets

Күн бұрын

Пікірлер: 165
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Jeep Speed Shop is offering 10% off if you call in to order and mention that you watched the Jk Gear and Gadgets videos! Hemi Swap Parts List: docs.google.com/spreadsheets/d/1OL8GxdgjKzThBju5MkTYFnyWXUWvH7XhhNZi2cOSmos/edit#gid=0 Hemi Swap Playlist: kzbin.info/aero/PLNBgnXDC0Wj4kRsesZpKJsvYHO4A7kR9c
@matthewjohnson5334
@matthewjohnson5334 3 жыл бұрын
On the 8 speed transmission there is not alut of info and was wondering if u got to change the valve body out iv seen in other videos
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
@@matthewjohnson5334 you don’t have to. But if you want the manual shift option (tap shift), then you can send the stock valve body to Jeep speed shop and they will reprogram it
@willb3018
@willb3018 3 жыл бұрын
I hope everyone appreciates the effort he puts into these descriptions of what you need to do depending on models, etc. Many KZbinrs just tell you what they did with their application. Nothing wrong with that at all. Just acknowledging the extra effort here.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Thank you 🤘
@aguywithajeep
@aguywithajeep 3 жыл бұрын
Okay Ben, it’s videos like this that get me in trouble. You convinced me I could do a 1 ton swap in my garage by myself, so I did. And here you are convincing me I can Hemi swap in my garage by myself... so I have to.
@racinginrushhour5816
@racinginrushhour5816 Жыл бұрын
I’ve been building cars for a long time. Bought a 2015 charger motor with the recommended 2010 Jeep steering pump. The intake tube runs right into the steering pump. I’ve installed twin turbos on a 2013 coyote that no shop wanted ti tackle. What steering pump is correct?????
@papegregpape83
@papegregpape83 3 жыл бұрын
Am I the only one that noticed that you had past videos of yourself playing on you TV as you were swapping out that yoke? 🤣🤣 All jokes aside, thanks for all the hard work you put in to these Ben & Cassie!
@TheatreJunky767783
@TheatreJunky767783 3 жыл бұрын
I was hoping I wasn’t the only one 😂
@deanarbogash6803
@deanarbogash6803 Жыл бұрын
I remember watching this before, during, and after my Hemi swap! I put a 2022 5.7L Hemi and 8 speed in my 2008 Jeep Rubicon and loved the whole process. I also did in a shed, on the floor, with all hand tools. If I can do it, you can too! All it takes time, money, and determination! 😁👍
@JeepGearGadgets
@JeepGearGadgets 3 жыл бұрын
My vacuum😭😂 this is what happens when I leave you unsupervised. Worth the loss if we get to see this thing on the road sooner😎
@mikethrapp
@mikethrapp 3 жыл бұрын
🤣 you sound like my wife 😂
@Rubiflake
@Rubiflake 3 жыл бұрын
This guy makes good, informational videos without being boring.
@Mr45Bullitt
@Mr45Bullitt 3 жыл бұрын
I would NEVER attempt something like this but you make it so interesting it's a must watch. Really enjoy your channel. Thanks for all the hard work.
@fxrs1982
@fxrs1982 3 жыл бұрын
Not bored. Never boring. Such great videos.
@richg8530
@richg8530 3 жыл бұрын
Narrator: But Texas never did figure out what to do... Great vid Ben! Hope all is well, stay warm!
@ssnova5255
@ssnova5255 3 жыл бұрын
your vids have inspired me to spend the kids inheritance, lol. I got a rust free 93 YJ to modify at Christmas. Then the wife saw our son's Gladiator Rubicon when we went to Texas for a visit. Needless to say back home to dealership we go. Now the owner of a 21 Mojave, just looking for some desert in the hills of Tenn. Best wishes for you and family.
@danpruitt68
@danpruitt68 3 жыл бұрын
I need a friend like Ben in Arizona, I have so many DIY projects I want to do, but just don't have the knowledge to do it myself yet.
@StormbornJKU
@StormbornJKU 3 жыл бұрын
You definitely make it look pretty easy putting a hemi in a JK. I feel like it’s way harder than you make it look, but to be fair you make everything look easy haha
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
It’s easy! Lol
@millstonejeepworx
@millstonejeepworx 3 жыл бұрын
Just ordered everything from Todd except my exhaust. Thanks for the videos...and inspiration to tackle this swap Ben. Will be prepping my motor and trans over the next several weeks. Plan to tackle swap once weather breaks.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Hopefully you saw my post about the discount!
@MrShannonkeeler
@MrShannonkeeler 3 жыл бұрын
Ben. You should have 500k followers mate. You always have amazing content 👍🏼
@justemptiedeverypocket9520
@justemptiedeverypocket9520 3 жыл бұрын
When I did my LS swap I was the most worried about the wiring and it turned out to be the easiest part of the whole damn thing
@EnfieldJoe
@EnfieldJoe 3 жыл бұрын
Very good tech on this swap. I hope that at the end of the project, you summarize the total project cost.
@el_jeepo
@el_jeepo 3 жыл бұрын
I feel like you were speaking directly to me in the beginning of the video 😂😂 thanks for writing that “boring” but not so boring info on your white board and being extremely specific your awesome! 😎
@pmp2559
@pmp2559 Жыл бұрын
7:50 so I can use these lines to replace the transmission cooler lines I can’t find for my Dakota? That’s a relief if I can!
@cautiontext
@cautiontext 3 жыл бұрын
I so can't wait to hear this beast cold start!
@rb26kinigos
@rb26kinigos 2 жыл бұрын
You are king of explaining swaps! Thank you very much!
@kevintucker7606
@kevintucker7606 3 жыл бұрын
I hope you didn't lose power for very long. I'm in Houston and we went almost 72 hours, no lights, no heat. Luckily we had water and none of our pipes burst! I got so desperate I was burning scrap wood in my fireplace!
@mistyssidemeattreat9498
@mistyssidemeattreat9498 3 жыл бұрын
So exciting! Love your new garage! Cant wait for the next update!
@monkeyman41333
@monkeyman41333 3 жыл бұрын
Enjoy watching you do this, but this is so far past my skill set, I will leave this to the experts. Kudos for your abilities.
@newbwheeler9777
@newbwheeler9777 3 жыл бұрын
My quality of life would be much higher if I had a friend like Ben...👍
@jlautomotive6349
@jlautomotive6349 3 жыл бұрын
Another great video! Loving this build and can’t wait to see it driving!! Keep up the amazing work!! 👍 I live up in New Hampshire and I can’t wait for spring so I can start tackling my vehicle projects!!!
@ryandavis3826
@ryandavis3826 3 жыл бұрын
30 degrees.... I’m in north Louisiana and it got down to 8 degrees. Sub 25 degrees for days! Parts of Texas had the same system hit them..
@olafstrand9965
@olafstrand9965 3 жыл бұрын
Love you and Cassie's channels! Please consider doing some live shows where we can ask questions and give tips and advice. commenting on 2 year old videos will not be seen and there could be more info to be gleaned! Keep those OG AK plates alive! I think I know why you keep residence up here wink wink lol
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
We have been planing doing live videos! Hopefully we will start it up soon. As for comments on old videos, I have a KZbin studio app which lets me look more in depth to my channel and I can view all comments as they are posted, no matter how old the video.
@jasonf1340
@jasonf1340 3 жыл бұрын
Great video Ben. Like always you do a great job explaining everything.
@josephbarnett1646
@josephbarnett1646 3 жыл бұрын
Loving the channel man can’t wait to see the Jeep all done hope to do it to my Jeep soon
@LuisSanchez-sj6jh
@LuisSanchez-sj6jh 3 жыл бұрын
Yeaaahh ben!!! This gets me so pumped for whatever reason
@mattland6278
@mattland6278 3 жыл бұрын
You should add some king shocks
@MP-sf6sc
@MP-sf6sc 3 жыл бұрын
I'm getting a camera here soon so with the new KZbin Channel I'm just going to refer to you as Jeep Dad where I've gotten all of my inspiration. ✌🏼🤣
@triple_j5252
@triple_j5252 3 жыл бұрын
Couldn’t you snag the back part of the connector off of your old engine harness instead of gluing?
@mikejeep743
@mikejeep743 3 жыл бұрын
Can’t wait to see it rip
@ernestocortez8500
@ernestocortez8500 2 жыл бұрын
Thanks for the great Videos now you got me Pumped doing a swap im doing the 6.4 392 just order my kid from Tod Jeep speed shop,I'm keeping the nag 1 what bell housing and torque converter do i need
@jordantobins681
@jordantobins681 3 жыл бұрын
Awesome work, and great explanations!! Love your videos! Thank you!!
@chimuelomaster8140
@chimuelomaster8140 3 жыл бұрын
One day I expect to do the same....Hopefully in the next 5 years
@dpost82
@dpost82 3 жыл бұрын
Awesome video !!!! That discount code is huge thank you so much !!!!
@KDUCATI
@KDUCATI 2 жыл бұрын
How did you route you transmission oil cooler lines? Mine go right over the passenger upper control arm mount and I only have an inch of clearance at ride height.
@damonwilliams2287
@damonwilliams2287 3 жыл бұрын
Like the videos but the temps in Texas were 0degrees in much of the state. The loss of power and cold were kind of a big deal given our power grid. Nevertheless, keep up the work and the swap looks good.
@SimonElenor
@SimonElenor 2 жыл бұрын
On the one I am doing I rotated the fuel rail. Now the fuel fitting is on the passenger side.
@JKGearandGadgets
@JKGearandGadgets 2 жыл бұрын
Good idea!
@rino11221
@rino11221 3 жыл бұрын
Hey doing a similar build. Did u have to change out ur drive shafts?
@عبدالسلاممحمود-ه3ث
@عبدالسلاممحمود-ه3ث Жыл бұрын
Hello, please help me. I have a Jeep Wrangler 2011 Sport, a manual gearbox. I need an automatic. What are the tools needed to replace it?
@caleblopez3139
@caleblopez3139 2 жыл бұрын
Do you happen to know the part number for your torque converter. For the 6.4 hemi.
@gogerwi
@gogerwi 3 жыл бұрын
Sure makes it nice to have that bumper, grill, radiator, condenser out of the way. BTW, 23 people died during the freeze last week while out of power. Several were elderly seniors without power in single digit temps for days.
@TaskForceOffroad
@TaskForceOffroad 3 жыл бұрын
Why do i feel like that last clip was some good old fashioned military mentorship???
@TheWyldeTide
@TheWyldeTide 3 жыл бұрын
It definitely was. Ben knows a lot more about these jeeps than I do.😂
@TaskForceOffroad
@TaskForceOffroad 3 жыл бұрын
@@TheWyldeTide 😂😂 definitely an asset for sure not to mention a legend in the jeep world on youtube. I remember doing this exact thing with some of my Marines when i was in great to see it still occurring 🤘🏻
@davidgauthier5788
@davidgauthier5788 3 жыл бұрын
Bro! Thanks for all the info 👍
@jeepindave5464
@jeepindave5464 3 жыл бұрын
Im sad youre loosing the manual, but the power will be sweet. You going to race litebrite again?
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
I’m down for a race! But let’s wait till Cassie’s LS swap is done and do a 3 way
@perikoglopez6276
@perikoglopez6276 3 жыл бұрын
@@JKGearandGadgets love me a 3 way 🥸
@sadattontiarce8434
@sadattontiarce8434 3 жыл бұрын
Looks like a lot off fun
@Go2Lb
@Go2Lb 10 ай бұрын
I have a non related question. What stereo are you running
@joshuapazos4674
@joshuapazos4674 3 жыл бұрын
Dope video man, thanks for making me want to spend money. Appreciate it.
@dlgarza5187
@dlgarza5187 5 күн бұрын
how did you do the power steering lines?
@jaimetrevino4865
@jaimetrevino4865 3 жыл бұрын
Glad I found this channel.very interesting stuff.from The Valley as well
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Thanks!
@seandrep123
@seandrep123 3 жыл бұрын
Hey Ben, what part of Texas are you in?
@austinlittle924
@austinlittle924 2 жыл бұрын
I'm a little late to the party but just wanted to say thank you for all the good information you put in the videos. Always been a DIYer so they give me some new ideas. Question for you, I have been debating how to go about this swap and I have a friend that has a dealers license that can get me into auctions for salvaged vehicles. If you had to do this again do you think buying a rolled ram with a Hemi and 8 speed would be more cost beneficial in the long run? and possibly cut down on the number of parts needed?
@JKGearandGadgets
@JKGearandGadgets 2 жыл бұрын
Yeah grab a 5.7/8speed from a 4x4 and that’ll help out for sure
@waijhou9529
@waijhou9529 3 жыл бұрын
Great video, great information. I like the style video you are doing, just sub'd!
@sewerratt47
@sewerratt47 3 жыл бұрын
So easy to listen
@dren2jdh544
@dren2jdh544 3 жыл бұрын
I think it’s time for a home generator!!! Be safe, I kinda miss Texas!
@marlonrec1522
@marlonrec1522 11 ай бұрын
Can I use the challenger 8 speed with the wrangler transfer case?
@asylumsys
@asylumsys 13 күн бұрын
I need that but I need the money need the shop need the tools and need the knowledge to do it. 😊
@VitalViperHD
@VitalViperHD 3 жыл бұрын
Awesome ! So much useful information
@Carlo-_
@Carlo-_ 3 жыл бұрын
I’d love to do the 8speed swap into my 17 jku
@daryllinkugel3804
@daryllinkugel3804 9 ай бұрын
Rolling blackouts, sounds like green energy! Those clowns never plan ahead!
@jasonscott5221
@jasonscott5221 3 жыл бұрын
Ben I was curious how you were going to modify the stock battery tray, looks like you decided to go Barnes 4wd. Is this because it was a pain to modify the OEM, or does the OEM flat out not work, Thanks.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
All covered in the next video! The OEM will have to be modified to fit with the hemi. Since we are cutting some of the OEM tray, we need to add something better to make sure our battery is secure. Of course another option is buying a full steel that is bolt in for the hemi swaps
@jasonscott5221
@jasonscott5221 3 жыл бұрын
@@JKGearandGadgets I knew I jumped the gun!! I should have waited for the next video, I'll be sure to watch.
@josephmusial271
@josephmusial271 3 жыл бұрын
Ben, I am thinking about doing the conversion on my 07 X. I understand the upgraded trans and drive shafts, but would you suggest upgrading my stock axles as well? Thanks any other tips would be great!
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
I would, with the 5.7 you would be ok depending on tire size though. At a minimum, throw some chromoly rear axle shafts in
@alexisalmaraz7260
@alexisalmaraz7260 3 жыл бұрын
When you talk about the transfer case. What make of model would you recommend or going with. I’m confused.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Those years, Jk transfer case. Rubi or normal. I’ve went over it in 3 videos so far haha
@ryanhartung7445
@ryanhartung7445 3 жыл бұрын
Oooh getting excited
@AntonioPerez-kk8cj
@AntonioPerez-kk8cj 3 жыл бұрын
Since you won't need that viper throttle body anymore, what's your plan with it? Wanna sell it?
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
It’s already sold. Some guy emailed me the very first video when I went and picked up this engine.
@danhambrick6331
@danhambrick6331 3 жыл бұрын
I hope your family is doing well with all that is going on down there...
@mikeh.8487
@mikeh.8487 3 жыл бұрын
Great stuff Ben! Spent a good amount of time thinking about LS vs Hemi swaps for my 2012 Rubicon, while keeping it manual. Is the Getrag238 the best option for the 6.4L Hemi?
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
It’s pretty much your only option. Lots of manual lovers go that route and from what I’ve seen a lot of them regret the decision and wish they went auto.
@samuelfink2716
@samuelfink2716 3 жыл бұрын
What did you do for AC lines? I have everything I need except the AC lines.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Havent done those yet. Once my wallet recovers i will buy the JSS lines
@patan77
@patan77 3 жыл бұрын
Maaannn how much tmdid all cost? My jeep motor just died I need to change it I'm at a loss with what to do with it.
@trialbyfirehomestead6810
@trialbyfirehomestead6810 3 жыл бұрын
Can you please do a actual mpg when swap is done? Love the videos and info.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Yes of course!
@trialbyfirehomestead6810
@trialbyfirehomestead6810 3 жыл бұрын
@@JKGearandGadgets thank you. I'm wanting to do a commander but swap to a newer hemi and put the 8 speed in and swap the axles and get rid of the awd. It's a long term goal so now it's just research and note taking lol.
@mazevx2451
@mazevx2451 3 жыл бұрын
I would be super happy just with the 8 speed swap on my diesel 😉
@revenge7174
@revenge7174 3 жыл бұрын
Would this info apply to a 06 wrangler tj?
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
If you plan on doing a hemi swap with the 8 speed. Or if you plan to do a more budget friendly v8 swap check out Cassie’s Ls swap videos on her channel jeep gear and gadgets
@revenge7174
@revenge7174 3 жыл бұрын
@@JKGearandGadgets you mentioned 07+ so I just wanted to make sure this info was valid thank you
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
The Tj will have quite a few differences, but I think Todd at jeep speed shop does sell a hemi kit for the TJ as well.
@dariocarrasco7936
@dariocarrasco7936 3 жыл бұрын
I'm definitely interested in the gas mileage/efficiency on this rig, or do you plan to tow it
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
I drive it
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
I’ll do a video on mpg
@kylenewton4798
@kylenewton4798 3 жыл бұрын
Other than the drive shaft lengths. Would there be any difference from a 2010 jk 2door from your 2010 jk 4door?
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Nope! Well, exhaust layout (muffler) will be a little different
@kevinwyatt873
@kevinwyatt873 3 жыл бұрын
Was wondering if you wanted to sell your old jk engine and transmission? I have the same jeep except mine caught on fire and I’m trying to rebuild it
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Are you somewhat close to Texas? I don’t really want to ship it
@kevinwyatt873
@kevinwyatt873 3 жыл бұрын
@@JKGearandGadgets I live in Alexandria louisiana and would be willing to pick it up
@Chasitek
@Chasitek 3 жыл бұрын
I have bell notifications on but had to find out this video came out on instagram :( Why does youtube suck.
@millstonejeepworx
@millstonejeepworx 3 жыл бұрын
Great video Ben. Thanks for the update. I'm still prepping my motor. Looking forward to getting to where you are with it. Question, I have a manual trans also. I was under impression that you need the JK auto trans mount. Did the manual work fine? Thanks
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
There might be a difference between the 3.8vs 3.6. My 3.8 manual mount worked
@millstonejeepworx
@millstonejeepworx 3 жыл бұрын
My is an '08 manual. So I guess I'll try my existing mount.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
@@millstonejeepworx it’ll work
@millstonejeepworx
@millstonejeepworx 3 жыл бұрын
@@JKGearandGadgets Spoke to Todd, the trans mount difference is with the 5 or 6 spd RFE transmissions not the 8spd.
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
@@millstonejeepworx join the Facebook group “jeep speed shop v8 swappers”
@danbouffard8194
@danbouffard8194 3 жыл бұрын
just wanted to no how much you have in total cost on that beast
@ItsJavishoo
@ItsJavishoo 3 жыл бұрын
How much will a swap typically cost?
@davidnelson3720
@davidnelson3720 3 жыл бұрын
What about the catch can on this one. Will you put one on here?
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
I actually just bought one for this engine. Was going to keep the diy one, but found a really nice 6.4 catch can setup on eBay with a good discount
@B2K1966
@B2K1966 2 жыл бұрын
Why can’t I use a 2021 6.4 ?
@christophermartinez5314
@christophermartinez5314 3 жыл бұрын
Great video
@matty86suk
@matty86suk 3 жыл бұрын
I must of missed it, will the 3.8 fuel pump work with this swap??
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Yep.
@joshbeckcom3151
@joshbeckcom3151 3 жыл бұрын
30*???? I would have gladly taken 30, it got down the 8 here in san antonio. Anyways your build is looking great
@saadchuck6379
@saadchuck6379 3 жыл бұрын
Well done
@tomd1939
@tomd1939 3 жыл бұрын
Is he watching himself on the garage tv while he's making another video in the same garage? Lol
@raulriveracrazycat5959
@raulriveracrazycat5959 Жыл бұрын
What would you say your total cost was to do your hemi swap?
@JKGearandGadgets
@JKGearandGadgets Жыл бұрын
kzbin.info/www/bejne/qoa6eXdviLKAsJo
@dugganstyles20
@dugganstyles20 3 жыл бұрын
wow never actually been this early before
@FoamyKeiko
@FoamyKeiko 3 жыл бұрын
Stay safe in Texas
@johnsmith-qz4bv
@johnsmith-qz4bv 3 жыл бұрын
great video ....
@jacobcrandall5666
@jacobcrandall5666 3 жыл бұрын
fuck yes
@bennelson9826
@bennelson9826 3 жыл бұрын
Yee haw!
@josephbarnett1646
@josephbarnett1646 3 жыл бұрын
Oo and I would love to meet you and your wife some day and do so trails and see y’all’s rigs
@billbarker3715
@billbarker3715 3 жыл бұрын
Dang I wanna do this swap now. Arghhh
@jcdixon01
@jcdixon01 3 жыл бұрын
Welcome to Texas...right?!?!
@RobertKohut
@RobertKohut 3 жыл бұрын
Nice!!
@michaelmurray2592
@michaelmurray2592 3 жыл бұрын
Can’t wait to hear her scream!!!
@JKGearandGadgets
@JKGearandGadgets 3 жыл бұрын
Next video you’ll hear a test fire!
Jeep Wrangler 6.4 Hemi Swap - 8 Speed Wiring And TEST FIRE!!
30:50
JK Gear and Gadgets
Рет қаралды 69 М.
My Jeep Wrangler 6.4 Hemi Swap is Finished!!
37:50
JK Gear and Gadgets
Рет қаралды 147 М.
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
392 HEMI SWAP on a 3.6L Jeep Wrangler JLUR!
29:02
Lite Brite
Рет қаралды 106 М.
HEMI swap in a Jeep JK Wrangler for CHEAP!!!
27:10
Maddog's Garage
Рет қаралды 17 М.
Jeep Wrangler HEMI V8 Swap Ep.1
20:20
JK Gear and Gadgets
Рет қаралды 121 М.
Installing the LS V8 in my Jeep Wrangler!
17:38
Jeep Gear & Gadgets
Рет қаралды 189 М.
Jeep JK Hemi Swap Ep.5 - 8 SPEED SWAP PREP
35:36
JKB OFF-ROAD
Рет қаралды 3,6 М.
The Hemi Jeep Rips!!  And now it’s Our Only Working Vehicle...
18:15
JK Gear and Gadgets
Рет қаралды 81 М.
First Drive In Our 6.4 Hemi Swap Jeep Wrangler!!
15:31
Jeep Gear & Gadgets
Рет қаралды 78 М.
Will This Work?! The Fastest Off-Road 6x6! (SUPERCHARGED)
38:21
Matt's Off Road Recovery
Рет қаралды 432 М.
Scammed by Lil Uzi Vert with a FAKE Bugatti key?!
18:12
VINwiki
Рет қаралды 9 М.
The thief is trapped 😂
0:32
community Official
Рет қаралды 3,5 МЛН
✈️Ковёр в самолёт #авто #лайфхаки #гараж
0:59
Короче, ВИ
Рет қаралды 1,6 МЛН
OMG 😯 c'est le plus utile🔝
0:58
Vergin Logan
Рет қаралды 894 М.
Range Rover против Bentayga против AMG GLE 63 против SQ7: ГОНКА
12:50
carwow Русская версия
Рет қаралды 171 М.