This video highlights my installation of a Skyjacker 2.5 inch suspension lift on my Jeep YJ.
Пікірлер: 18
@RedneckGarage7 жыл бұрын
Looks outstanding ! I was surprised at the lack of rust when you started.
@pusherpilot7 жыл бұрын
I had performed the frame off restoration last year but I did not replace the springs at that time because I am a cheap ass. I had rather do it later on when it is much harder to get to. I had cleaned everything and removed rust and re painted when I did the frame off.
@allenshows66634 жыл бұрын
Bought the same kit only from rough county they have all bushings in leaf springs and U bolts have nuts and washers in kit and all 4 shocks.
@lokirip23725 жыл бұрын
I am in the course of putting this kit on my cj5. The front is in and looks like it corrected the castor angle issue I had from a previous shackle lift. I gained an inch as well, as my old leaf springs were shot and ran flat.
@kentbuerk38827 жыл бұрын
Jeep looks really good. I have two wranglers and have 6" spring lifts on them. somtimes wish one of them was just a 2" inch. Also do you still do the metal trussed buildings? If so can you send me a link to the web site please?
@pusherpilot7 жыл бұрын
There is no web site. I designed this building myself using metal trusses that I purchased used from a chicken house that was used for commercial growers. Just started with the size of the trusses and worked backwards from there. My shop is 36 feet wide by 45 feet long. Thanks for your comment
@genewise28025 жыл бұрын
I just finished installing my 2.5 inch skyjacker suspension lift with black max shocks. My rear drive shaft is at a steep angle. 40 degrees maybe. What does yours look like, and did you have to install shims or a yoke eliminator?? Thanks in advance!
@pusherpilot5 жыл бұрын
Neither, I lowered my transmission 1 1/2 inches. Super easy to do. Correct geometry. Never had a problem with the undercarriage since the build.
@gamesofcontent5 жыл бұрын
Have you had any trouble with it denting your shocks? I have this kit on my 1990 YJ and it dents my shocks at full lock full compression.
@pusherpilot5 жыл бұрын
I have not had this problem but I dont do extreme stuff with it either
@jrodz8085 жыл бұрын
How is the ride quality with the skyjackers? Also, what degree are the wedges? The ones that angle your drift shaft.
@pusherpilot5 жыл бұрын
Its rough but not as rough as some lifted jeeps that I have ridden in. I am not sure of this wedge angle but Skyjacker should have that info on the package information but not sure.
@pusherpilot5 жыл бұрын
Rough as all get out but I am ok with that.
@tylerhalverson22992 ай бұрын
If I got this would I have to do anything to the rest of the jeep?
@pusherpilotАй бұрын
You may need a different length driveshaft. I had to order a little longer shaft
@cycl0nnus5 жыл бұрын
nice. hows it riding these days?
@pusherpilot5 жыл бұрын
Drove it today to my Dads house about 65 miles away. I continue to drive it daily to work.