$175 Yamaha PW50 Project - Part 3

[@Iseekoutthetruth]

awesome video, Love how you get your son involved in the hands on work.

[@jenniesgarage]

Thank you. I love working with him. There might come a day when he doesn't want to hang out with ol' Dad, so I have to enjoy it while I can.

[@spiritusinfinitus]

Good to see Jennie Junior showing dad how it's done!! Almost there

[@mrc1539]

All your work will be well worth it when you see the look on that young mans face when he takes his first ride. What a different world we would have if more parents spent some time with their kids. Awesome video ! 👍

[@jenniesgarage]

Exactly. Seeing his smiling face in the helmet will be the payoff.

[@FoamSquatch]

I have to say, I enjoy your videos. I am a DIY and often have to deal with the crap I have on hand, so its nice watching someone else the same way, then add your sense of humor to the mix and its a win win. Keep it up!

[@kevins4229]

Randomly came across your videos when I was looking to find a cheap bike project to do with my daughter. Really enjoying watching and learning from all your videos. You have a great way about you of explaining. Great family you have there as well! I wish I could find bikes in Canada like you can where you are. NOT very easy!

[@jerrywhatsworth3589]

I have two of those pw 50 yellow in color belonged to my 45 yr old son when he was about 4 or 5, your videos bring back lots of memores for me

[@LonW1973]

Respect well earned.

[@jenniesgarage]

thanks. It made the video about 30 seconds longer, but he deserves the tribute.

[@daddydollar1000]

what type gas u put in pee wee 50 Yamaha

[@yami5984]

I love how you buy used bikes that are almost trashed and make videos fixing them it helps me learn how to do this stuff and its entertaining

[@TruenorthmtGod]

Your son must be enjoying himself on it. Great job pops

[@travis6373]

Defiantly one of my most looked forward to you tubers! Loving this series

[@louierichards4143]

My leg was tired from just watching him kick it... what a trooper! Can't wait to see him on it!

[@jenniesgarage]

He amazed me with his endurance. Over 200 kicks.

[@garnerwilson8134]

Your dad jokes are on point. That oil pump sticks open sometimes and dumps too much oil in the cylinder. Just from what I’ve seen on KZbin. Thanks for the videos!

[@og_boogie3x706]

Man i certainly appreciate your videos #your son was determined good job

[@jenniesgarage]

Thank you. I was so proud of him I had to put all his kicks in the video.

[@og_boogie3x706]

# Keep your son close #I love jennies garage

[@TNTMOTO]

I like how thorough your videos are. Very descriptive. They are a great help to many. Keep up the great vids.

[@katiedoyle4425]

I respect how your son didn’t give up on starting that little thing

[@Mickey_vee]

A man after my own heart. Thank you for fixing things rather than throwing them away. What a legend !

[@alanhirayama4592]

I have been making improvements on a PW80, I am enjoying your work on the PW50!

[@Jimmy_Watt]

He’s like the anti- Ronnie Mac. Great videos.

[@xburtonboardnx]

I've become an avid fan of this channel. Great job!

[@mwdeters]

2,000 Lbs of respect for that son of yours. He's lucky to have you for a dad.

[@damiancaesar1686]

Great videos, simply to the point and a bit of fun. Much respect to your sons staying power, he's earned a ride by now. I'll be using some of your ideas and home fixes on my PW50 project, Thank you.

[@oznik46]

I'm addicted! Number 1 restoration\projects channel in KZbin. You are one talented man!

[@bikeflippaztv8556]

Favorite youtuber

[@jenniesgarage]

Thank you sir!

[@iShadowMtn]

Jennies Garage man I love this series. Great to see your teaching your boy young.

[@spencerkisby7040]

BikeFlippazTv SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SMAE SAME SAME SA SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME SAME

[@djhybrid9203]

I had to like this video on the bases that your kid tried so hard to get it to work.

[@TheInja]

love your videos. Such a great dad!

[@davidd8511]

Top Dad... way to go getting your son involved... never too young to get some hands on with the bikes.... I have been watching since yz426f project... well worth subscribing, very entertaining and informative. Thanks for the videos.

[@jenniesgarage]

Glad you like the videos, thanks

[@Snitchy1989]

i hate that i watch a new video, and have to wait for another :D Love watching your vids so much, Great attention to detail

[@ianclinthorne9968]

You really got a head on your shoulders love the videos and the budget builds 👍👍

[@treebeam1655]

I'm so happy you uploaded another video

[@agoodballet]

How did I overlook this series of videos from your channel. I’m really enjoying the PW50 content. Please excuse my late views and comments, I guess I missed these somehow. I figured you guys could use a few likes and comments to help boost the channel. I love you guys’ videos I started watching back when you got the cheap generator and fixed it out on the deck.

[@brandonquenneville7330]

that boy of yours Jake . omg . steady and confident! wow

[@GregMack]

Your sons a trooper I don't know to many adults that would spend that much time trying to kick start a bike now a days.

[@brandonquenneville7330]

one of a kind . the best videos here by far*

[@jenniesgarage]

Thank you sir!

[@adelbelgacem1287]

Most of the fun cleaning and doing stuff you don't show why i like your videos but pls show more of the thing that you do in your self time

[@codybrookehanson2346]

Holy moly, that's a lot of kicking. Good for him!

[@genji4466]

I respect your boy for trying.

[@Ken-RicSki]

Like you said about causing damage with an oil injector delete, I got a 1980 arctic cat snowmobile they didn’t cap the lines and was running lean at high end after carb cleaning ,capped those lines and it ran pry 20-90f degrees colder

[@littlejoecallahan4579]

Your a smart person buddy. I love to watching your brain go to work. Own theas falling solders.

[@lucosullivan8674]

When's part 4? I love these videos by you there the best!

[@fixit4u73]

"Did the bride trip and fall?" Cracked me up😂

[@poisionivy]

I just fond this ch and all ready loving it keep up the awesome work

[@coreyrivera8816]

I love this series and love ur channel keep doing it I have ttr 125

[@madvelila]

Good and entertaining videos! Greetings from Finland. :)

[@thomasarauza8900]

"and my boy's leg needs some rest" 😂😂

[@chasef5349]

Watching this 2k19 when new years

[@Jonasdevenport858]

Yes!!!

[@fuzzyconcreter1181]

You are a patient one sir

[@powellsanders4506]

If I'm correct, you don't put mixed gas in the gas tank, you only put in straight gas. The oil sump for the 2-cycle oil that you just put will automatically mix the gas and oil for you.

[@luke9299]

Powell Sanders in the last video he said it doesn’t work

[@coledraper6897]

Powell Sanders yes you are correct

[@JarthenGreenmeadow]

Hes not sure if it works I think

[@gabrielmolinari1079]

I think your right but I don't know because I'm a 2strok guy.

[@yeetusdelitus1650]

you make it look so easy

[@joshuastiffler4447]

I love these vids I love this pw 50 awesome bike so far

[@cityofplant]

I watch your vids and tried to fix my dirt bike. Now I have a stallion.

[@G56AG]

Back in high school I had a Cushman Eagle, they didn't come with a key, just a kill switch. I wanted to ride it to school, but needed a key switch so it wouldn't be stolen at school, so we had a key switch installed, next day I went out to start it so I could ride it to school, it wouldn't start, I kicked it at least 50 times, went back in the house and told my dad it wouldn't start, so he asked me if I used the key....it started when I put the key in it. I should mention the switch was out of sight on the back side of the engine, you had to look for it to even see it, plus you started it on the other side of the bike from the switch.so I had a little bit of an excuse for forgetting.

[@z2eight]

THIS DUDE IS A FREAKIN GENIUS !!

[@austinmcnew5878]

I learn so much from you man awesome video 10/10 rating from me!!!!

[@joet-sk4sw]

I love the cable guide idea....lol

[@utflod9820]

Fav youtuber, learned so many new things :D

[@jenniesgarage]

Thanks

[@justanotherguy1162]

Ya boys a champ mad respect ✊

[@sonomamoto2334]

I remember kicking my pw50 like that lol awsome to see love the vids

[@eagerbordercollie3200]

SonomaMoto lol same I didn’t want to get rid of it even now at 11 years old I still want it back

[@philtowle4683]

Tried to get my eldest son into swinging the spanners when he was young by buying an old 4x4. Attention span was about 5min. Only got interested when he could drive and realised how expensive repairs are. Could have had years of experience if he had listened.

[@nike12000haha]

Can't wait for next ep!

[@jenniesgarage]

me too, I really want to teach my son to ride.

[@funnyjackson2732]

Doinng goodddd💪

[@youpi403]

Man your boi just don't quit

[@kinglouis6974]

RESPECT ✊🏻 too ya lad

[@NoahWasserman]

How did you take out the screw in the engine case at 4:30?! Im having this issue on my honda trail

[@nickegan3988]

Best thing on the internet

[@jenniesgarage]

Thanks so much!

[@daddydollar1000]

I got a Yamaha p/w 50 it start up thin shut off I put a new spark plugs it crack up thin shut off

[@goddardbenjamin]

Love your videos keep it up!

[@btwwholland]

your vids are great

[@philtowle4683]

Are the holes in the weld not from the wire

[@marlinrobertson5464]

Woohoo another vid!!

[@adamrosica2286]

Check the petcock valve for any contamination. There might be gunk stuck in it

[@TwiceFives]

Fun times...just a little curious, though...why use mixed gas when you just fixed the injection system?

[@HorsepowerGarageVideos]

Just to be safe

[@jenniesgarage]

yes, better a little extra smoke than a seized motor

[@JarthenGreenmeadow]

Jeez your boy has some persistence.

[@endurotruckererniedesjardins]

awesome mod for pw50 s is to get a cylinder and head and piston for a trizinger 60 3 wheeler or zinger4 4 wheeler. 85 to 87 Yami made them

[@dougiequick1]

For a family riding two strokes I can see the advantage of eliminating the oil pump stuff....everyone uses the same premix....We had one of these for years my sin never did break it and he rode the crap out of it....indestructible....butI swear Idont remember it having an injection system...weird....the next bike I bought him was PW80 and then a BW80 and same thing....dont remember that injection system...must have had one I just don't remember it

[@250_matthew2]

Are u going to make a riding video of the 250

[@jonathanbanks8956]

Why did you mix the gas in an oil injected system?

[@waynemazan7485]

great video... thanks

[@franklinkopecky9644]

i worked on one of these about a year ago... that stupid kill switch screwed with me at first... but the problem was the carb... the guy bought a chinese carb from ebay and it flooded immediately... the needle had no rubber tip and the seat was not rubber either... they sent another carb for free and all was well

[@zx8401ztv]

Dam that bike keeps giving and giving :-(, so many problems that i wonder if it ever ran propperly. Yes that piston does look damaged, the rings/bore won't be any better :-(, but if it has enough power to trundle around then being slower is safer for the lad :-) Sometimes just taking something apart and fondling the parts makes it work, i've done this many times and the item works again!, the down side is ya don't know what the fault was lol.

[@jenniesgarage]

Yes the problems are really popping up. My perception of the bike in general has changed from "well used but still solid" to something less complimentary.

[@valtslp7443]

Awsome vids

[@iagosilva926]

blz I'm from Brazil I have a bike like this and the start pedal stuck what could have happened

[@hogg8888]

RESPECT

[@billswingle2672]

Admit it you’re having fun.

[@TRX450RVlogger]

Great job man as always. Also... Did you get a new Camera??? Quality seems to be even better.

[@husky9562]

How many more videos will you do with the husqvana

[@jenniesgarage]

At least one more, I want to do a ride video.

[@husky9562]

yeah a ride video would be awesome

[@Harborman253]

you should eliminate that oil injector. They are notorious for failing and burning up the engine. Premix the gas like a real 2 smoker.

[@libertyforamericanow]

hey buddy, you should buy an ultrasonic cleaner from Harbor Freight. then you can just use water in a little shot of Mean Green Engine degreaser to clean all your carburetors.

[@zach6521]

You're the Bill Nye of motorcycles. Speaking of Bill Nye, adding corny sound effects doesn't seem like it would be hugely out of character for you. Awesome videos!

[@Zrclle]

You are fucking brilliant ! Wow

[@garrettholman1839]

You can get the oil line from Ace it's it's only 13¢ a foot

[@qwerty123627]

why are you putting 2 stroke mixed fuel in the tank its now got an oil pump for that!

[@frasertive2726]

It wont hurt it. It will just make it smoke more than normal

[@602Busa]

I love the quality of your videos. Are you in arizona?

[@jenniesgarage]

Thanks! No, Im in ca

[@gabrielgalaxygh]

Mine pw50 is the same they took the oil pump reservoir. I think alot of people domt trust it and just use premix

[@davestraight8219]

so is mini jake working at AMI now :D has upgrade to crf 450 happened :D

[@grassblade6148]

Hey I have the same like motorcycle engine but different model it's not a dirt bike but it's like a street bike model and it does have some things wrong with the carburetor so I don't know if you can help just tell me something

[@dylanstewart4861]

The welds looked like that because, yes,the rust, and you didn’t buff the metal and make it cleaner

[@travispitts404x]

the weld looked like that because air probably blowed your gas away

[@bullenharben9905]

A set of Japanese industry standard (JIS) screwdrivers will save your fasteners. Phillips screwdrivers will chew them up.

[@gabrielmolinari1079]

You could have just tap the bottom of carburetor with a screwdriver and the flot might not have been stuck any more. And the gas comes out of the over flow like it did could have ment the flot was stuck

[@fabiolarangel4352]

1:03 he-pur-fect!