John Deere 850J dozer engine install after rebuild, Part 5 Didn’t go as planned🤦‍♂️🤦‍♂️Big problems!

We finished up putting the small accessories on the John Deere 850J dozer 9.0L engine and drop it back in its hole after rebuilding it, Follow along to see if it ran..... It didn't go as planed!
Check out Area Diesel service for all you diesel needs, they helped us out on the injection pump. be sure to mention us for a better deal!
KZbin channel
/ @areadieselservice
website
www.areadiesel...
Previous dozer videos
Part 1
• Inoperative ex militar...
Part 2
• What happens when you ...
Part 3
• Tear down of the John ...
Part 4
• John Deere 850j dozer ...
Thanks for watching
C&C Equipment stickers and merchandise can be found here
ccsurplus.ecwi...
Check out our friends at Area Diesel Service and mention us for free shipping
www.areadiesel...
Thanks for watching
Facebook
/ candcequipment
Instagram
/ ccequipment
Website
www.ccsurplus....
Email
[e-mail]

[@glynngrauer3962]

Don't forget to hit that like button it doesn't cost you anything but it surely helps this channel and Clint out a lot

[@alithemagicbum]

I do, even before the video starts... cuz I know they ALWAYS have great content!

[@jeffwilliams3642]

Every time even before the video plays because i know im going to learn something i dont know.

[@chrisgriffin2587]

Pound it!

[@glynngrauer3962]

Pound it real hard

[@jeffhenson1994]

@@glynngrauer3962 wtf do mean bleed the carb

[@ChrisKnoop-yz6ho]

I respect all of the men that put in the extra effort and supported the team.

[@paulbush7095]

You could’ve just called it good to go but you have a conscience. That’s why you are still at it and have repeat customers. Im grateful for the content in any event.

[@latisimusd]

Again your attention to detail on your engine rebuild is equal to or better than some OEM and aftermarket builders. Sometimes a noise just sticks in your craw and you can't let it go, just don't feel quite right. Great Friday video!

[@bobwebber8521]

You are right. The camera picked up a strange noise. As soon as it started I could tell something was not quite right. Unfortunately another tear down.

[@robertneumann7782]

Y

[@MrPnew1]

It sucks about the engine rebuild issue here Clint and I hope it’s resolvable without spending too much more money. Thanks for sharing the successes as well as the ones that didn’t go so well. Keeping it real at C&C Equipment.

[@robf2251]

40 years of building engines. I have to agree, sounds like a rod to me as soon as you started it. Hope it didn't hurt the crank.

[@edwinhsingmaster9135]

Some motor pool boss knows all about the good / throne rod engine swap on that rig. There were other surgeries, too. Pride of doing a good job is evident. 👍

[@eagledustoff37shortserious65]

Its great to see you take the time to show Hunter how to build that engine. Plus watching you and "Sausage Fungers" work as a well oiled team!

[@ringstinga]

Dam one thing after another ! I have 100% confidence that you will get this sorted and someone is going to get a cracking machine ! Thanks for sharing and your honesty says a hell of a lot about you. Respect from Scotland.

[@rickhay9782]

Clint, your teamwork on that engine install was smooth as glass...great job guys...watching you is a pleasure!

[@C_CEQUIPMENT]

Thanks 👍

[@t1259sw]

On our end we could hear it as soon as you started the engine. For those of us that have followed you for any time knows your repetition is wroth more than the cost of making this issue right with the end customer and all of your YT views. Great job.

[@jamestsmith4500]

I thought I heard a strange noise. I had to search the videos to discover that you had to pull the engine again to do an "exploratory surgery" video. I'm glad you go with your gut. It's rough sometimes making the decision to find your own mistake. But it shows that if you can find your mistake and own it, it makes you better at finding someone else's mistake. My hat goes off to you. Keep up the precision, high quality work that both of you do as a team.

[@jasonlawson8982]

Man that sucks Clint!! You could have edited that out but it just shows how honest of a guy you are and can't wait to see what the problem is. Good luck!! it's going to be a great machine for someone when you get it right.

[@C_CEQUIPMENT]

Your exactly right

[@Jfreeman-k4l]

I could hear the tap when it was running but you guys are awesome mechanics.

[@jwdickinson1]

watchin’ you guys wrangle that wiring harness reminds me if looking for the bad bulb on a Christmas tree 😂😂😂😂😂

[@CorpusChristiHouston]

It’s nice to see someone these days where “close enough” is not good enough

[@timothyhaid1828]

Thank God for people like you that "make it right" versus just letting things slide. Certainly coming to you when I get ready to buy a dozer for the ranch.

[@sylviaprudhomme5417]

Never give up. Y’all are one hard working group of guys❤❤❤❤❤

[@thomasdesmond2248]

Yeah Area Diesel Service is awesome. Customer service is second to none. Same for C&C a match made in heaven. God bless

[@vincentkevinjones8403]

At least you boys know what you are doing repairing dozers better than the military

[@flinger888]

Great videos, guys. I used to weld for a small company in North West Ohio. We made all the hoods, grills, side doors and other exterior components for these dozers. Every time I watch your videos, I see another part I used to make. 🤟

[@williamgraham8809]

You have to be the most honest and ethical business man I have seen in a very long time! These qualities added to your skill set and professionalism make you a standout in today's market! I'd buy from you anytime!

[@alithemagicbum]

Hi Clint I always appreciate your knowledge, craftsmanship and know how! Everything is done to perfection, glad to show others how it's done. I'm sure Kevin,your kids and Randy are glad to have you as a mentor. Always honest with no nonsense, quality videos.... keep em coming! Jut don't teach Kevin too much otherwise Sauge fingers Garage on the horizon, lol All kidding asides he seams like a very loyal person/ worker , he's getting a lot better being on camera with some comedy lol. Kevin's paint jobs are this world!

[@andymack5093]

Well done Clint, Kevin, Randy and "Dad" getting it "shoehorned " in!

[@BennyKeltz]

This video speaks volumes about your business ethic Clint. I feel fortunate to have ran across your channel. Keep up the good work

[@amalfi460]

Clint wise man says “ every roll can’t be a jelly roll “

[@tomrogers323]

Good Job Canada….eeeeeh now that’s funny….another great learning video

[@waywoofy]

I thought I was Imagining that noise. Thought i was maybe just the way the camera was recording the sound. Thanks for adding that in. Great as always👍👍

[@abikerinpa]

You got a wealth of knowledge building them dozers my friend , and you got a ton of respect going your way for going that extra mile after you yourself picking up on something thats not right sounding in the motor .... good work my friend and much respect ! 🍺😎

[@C_CEQUIPMENT]

Thanks 👍

[@billypelkey4766]

❤ great job Kevin and Clint, throughly enjoy watching you both work together ❤️.

[@rickeyd6173]

Not that I am an expert in any way but you are the most gifted mechanics I have ever seen. I am 65 years old and am amazed that someone your age has acquired such knowledge and unique problem solving skills. You could teach McIver a thing or two. (guess only the old folks will get that) Kudos for the great job you are doing raising up your boys! I know you and your wife are so proud of them.

[@OldVermontGuy]

Greetings from No VT - Great example of small things that can crop up. As usual, your approach of "make it right" in a world "where close is good enough" is all too common is so great to hear! Thanks you.

[@Anonymous..VQ3.5Lg35]

I had no idea about drive calibration! Had no idea that the dozer was that fancy!

[@arthurbiringer5676]

Great video and a great job! Murphy’s Law tried to get you but you beat it!

[@brucerandall4792]

Hope you will have a part six on what you found wrong

[@kevinmurray7135]

That was a tricky little bugger but can’t trick the master of ingenuity nicely done lesson learned got to check everything out less complications in the future 👍😎🇺🇸NY

[@andrewruble7706]

Clint you and your guys are some of the most honest in the business. Thanks for caring about what you do and making it right for the customer. I'm sure you don't want to tear the motor apart again but I am sure you will make it right before it leaves your yard. Thanks for sharing good and the bad in your business. Cheers

[@C_CEQUIPMENT]

I appreciate that

[@rhondasweeney7271]

(gayle) As many hours As you and your team have worked on that machine,I cannot believe the minor things you had to do to it, they were tedious. Kudos to you and your team for the work you guys have done on it

[@kentclaxton7230]

That Randy keeps that shop looking good always.👋👋

[@gregdrmax]

Damn...I heard the tick. Looking fwd to part 6. Holy cow hope you didn't tear it apart.

[@thebear5454]

That was a long hard struggle but you guys succeeded in taking scrap iron and making it live again.

[@araofmadisoncasey4247]

glad to see you will make it get to your satisfaction, most would let it go, Regie Jackson says the only person i need to impress is ME

[@brianaroe]

Can’t wait for the next episode.

[@roberttolliver5430]

All videos are great on your builds. What I and several others would like to see is a jeep build out of all that you have in your warehouse, please thank you.

[@alithemagicbum]

Second that!

[@C_CEQUIPMENT]

Well your in luck because we did a 3 video series Should come out later this month

[@alithemagicbum]

@@C_CEQUIPMENT Awesome can wait for that! I'm sure they will be some great series.....another great treat for us 👍

[@mtnman6942]

Dag nabbit 😢. Best laid plans. Hope it’s not something too expensive . Thanks for showing the good with the bad🙏.

[@fitrivan2499]

happy to see this video of the process of installing the john deere 850J engine, great, complete calibration of the bulldozer is back to normal

[@Eddie-f6t]

Go Randy Go , Good man

[@pinwizz69]

Clint, nothing you do with your sons and crew bore us subs. We'd watch you just working on a lawn mower engine. The only reason I'm watching this two days late is my Bebita Wife Maria and I was helping an 83 yeard friend of ours sort, give away, donate and pack up her duplex apartment to move up to Hendersonville North Carolina to live with her son. She just finally retired last year and rents have increased ridiculously way over what they should be. So I got a lot of catching up to do here on facebook channels I watch.

[@johnrobichaud2776]

It lives to go to new places

[@AndrewFroude]

I am pleased to know that the knocking wasn't just me thinking it didn't sound right. Good luck finding out the issue!

[@mjbjw77]

Really great job Gents!! 850j sounds good 👍

[@tdimccullough]

it's amazing watching you guys putting this dozer engine in place the planning and design work that goes into making machines and getting them to fit together, and this is only a dozer

[@JR-vg3gg]

Very Nice Job..... It's pretty quiet....... ✊✊👌👌🤗👍👍👍

[@Mike-x5i4s]

Clint with the knowledge and patients revives another machine… phenomenal results…thank you guys for all you videos.

[@garyfeltus9801]

Good to hear it running. Hate see you have to pull it down agrin to find that tic. Great video as always.

[@jimbarnick3330]

Wow.......What a booger, you guys did great JOB....Even Randy was Baffled....Carry on !

[@thomasleonard1846]

And sausage fingers for the win! - lol You have a wealth of knowledge I hope you will be able to impart to your progeny!

[@ordinarymiracles5959]

Well done! Shows the importance of experience and critical thinking skills.👍👍👍👍👏🏻👏🏻

[@C_CEQUIPMENT]

Thanks! 👍

[@waynekeeler1442]

I thought I could hear something in my earbuds. It sucks when you have to pull one back out. You will find it good luck!!

[@glynngrauer3962]

You are one very smart young man Clint

[@R_R_R_R_R_]

Man what a journey that one has become; you’ll will get it

[@user-kr9mh5oi1q]

another AWESOME picture show

[@C_CEQUIPMENT]

Thanks again!

[@soonerborn6694]

Privileged to see your work - real deal, Sir. Thanks for prominent US Flag in your shop. God Bless you and yours.

[@C_CEQUIPMENT]

Much appreciated

[@ProudPapaw88]

Great job guys. You sure have a good group of people around you. Great video. Thanks for sharing. I’m sure you will figure what’s causing the problem. I have all the faith in the world you’ll figure it out.

[@C_CEQUIPMENT]

I hope so too

[@charleswelch249]

I noticed the knock from the startup. Sounds like a wristpin. Hopefully, it isn't going to cost much to fix it. But for sure, the pan and head have to come off 😢. I hope you had a good time at the auction this week.

[@reedburke7762]

Clint, I was upset to learn that the engine was clicking. It's unfortunate that it will take unforeseen time & expense, but I have no doubt that you won't release it until it is perfect. Because your organization has excellent management, expertise, talents, and ethics-all of which are increasingly uncommon these days-I enjoy and appreciate this channel. Thanks for the videos, and keep up the fantastic job.

[@pinwizz69]

I believe it was Wes from Watch Wes Work who took us on a tour of Diesel Area Service's facilities and shops while they repaired a unit for him. They're a dead seriously top of the heap bunch of professionals there..absolutely facinating how they have seperate shops for every stage of rebuilding units from strip down to cleaning to rebuild, paint and testing. They gotta have several millions of dollars worth of specialty equipment to do things the absolutely best way possible with people who are top of their profession level.

[@jamescole1786]

2/5/23; JD850J after engine rebuild, install, tranny psi control re-set, test drive computer re-calibration of engine speeds & drives for parallel tracking & exact/correct control...⚙️ all seemed fine...but...👂🏼🦧🤔⏲️👂🏼👂🏼🦧 'new' engine 'tick' ! Much appreciate your honesty telling all us viewers several possible issues...all involve another (2nd) engine removal & disassembly ! Truth, honesty stand out on you Clint! 👏 Your integrity! Anxious to see yur next video on progress of this project. You have all the tools & facility & experience & resources (books, computer search/technical videos) you need to go back...& do a forensic examination of the numerous components. What a teaching experience this will become! Thx for your honesty! Am sure this will work out for the best...but will take more time, attitude/effort & $$ to get this resolved. You are t h e man to show all of us how to fix a bad situation. Much appreciate all your efforts! Stay safe & do carry on!💪💪🛠🙂

[@C_CEQUIPMENT]

Thanks

[@marilynhansen3337]

WOW, What a pain that was, I AM SO TIRED!!! Job well done, I am so glad I could help.

[@72hourbob61]

Man sorry to hear that, good luck.

[@johnnybgoode6466]

you maybe disappointed Clint - but your integrity to get the job done right is what impresses me. Hopefully it will be an easy and cheap fix, cheers from New Zealand

[@delbertbrown6381]

I liked every thing in the movie. Good show.

[@P-J-W-777]

Really appreciate your attention to detail, making sure you provide your customers with reliable equipment that they can trust. Repeat customers are the best customers because they usually tell their friends and we all know word of mouth is one of the best advertising methods there is. Great job once again!😊

[@C_CEQUIPMENT]

I appreciate that!

[@williamreese2477]

Kevin looked to have a pretty lady holding him up on his side.maybe was planned.Nice Job

[@guymcneill1711]

Good job you have a Lotta knowledge when it comes to doing stuff like that I was pretty amazed. I watched all the videos. Very very interesting. Maybe I’ll learn something as well. Thank you for your videos they’re great.

[@chillywilli]

Geez you got bad luck on this one. You already mentioned it in the livestream but it is a good thing you don’t let this one pass over one night.

[@jasonfletcher8444]

I would really like to see the repair. The problems you run into are the best part and make for good content. No one wants to see people phone it in because that's not how real life works. Great video!

[@C_CEQUIPMENT]

Stay tuned

[@SpeedSmith]

Excellent that you are looking at the tick, I could hear it and it did not sound right. Interesting that the cameras picked it up more than you guys in person. KZbin is proving useful. Great work. :)

[@Richard-C]

does Kevin always smile when he works? great video can't wait to see the next one 👏👏👍👍👌

[@downrightme6811]

I think you guys do an amazing job on the dozer’s you get, especially the paint 🎨

[@gregadams51]

That SUCKS ! great work guys Ugh

[@RobertFay]

*- Polishing your Reputation can happen best when you have a top quality ear to work with.* *- Good for you. Top shelve mechanics and prospective clients have learned to hear well, too.*

[@billtudman7867]

Thanks Clinton.

[@sonnyboy2273]

Really good video - Looking forward to the continuation.....Thank You..........

[@eddiecabrera1408]

Another Quality Job done by C&C equipment. Clint you guys are the best your team rocks kudos to you guys. Your channel is by far the best heavy equipment repair shop on KZbin. Thanks for letting us tag along with you as you do your repairs. For all viewers watching please hit that like button and subscribe to watch further videos done by Clint and company. Not only do you see awesome repairs but it's also a comedy show. The funniest one there Kevin he makes me laugh my ass off. Just want to let you know that you did a spectacular job on that 850j. C&C equipment Rocks!!!!👍👍👍👍👍... But I did have to add this I do like Dirt Perfect as well.

[@maxobara1496]

Another good video, the ending sucks😢 I feel for you guys!! 👍🇺🇸

[@edsrange1]

Thanks for such good and Honest content.......

[@dawnamize5118]

I kept wondering how come you guys didn't hear that noise. I was going to watch a different video to see the other JD machines made the same sound, I'm glad you cleared that up at the end of this video. Much respect, Jim

[@billypelkey4766]

Keep up the good work that y'all do, I love watching everything that y'all do, many blessings my friends❤

[@liamterry5301]

Parts cleaner got the engine looking good. 👍

[@danab1761]

The job done right glad to see Kevin back on the big screen 🐷

[@Lee-At-Green-Pheonix-Rc]

When a customer come to buy a piece of equipment from u guy gonna be real happy with ur machines the amount of money and work hours u throw at it plus any new customer doubthe maintenance of the mach can check ur vids out 😎

[@justinmartin3055]

Good job clint and Kevin yall always do good work I like the comment Kevin said it wasn't dirt perfect vacuum

[@scott3708]

Heard that tick from initial start up. Sounded right off like a rod.

[@rdecoster1]

Shoot anyhow!!! One thing for sure, you are getting faster and faster! So sorry to hear. Great video by the way, just not the ending everyone wanted!

[@edhammond8709]

I am sure you will find something great video very informative

[@phil6465]

This one is fighting you all the way, but it will be right when your done with it.

[@Mtlmshr]

Had no idea that they used that much pressure! That’s massive

[@tanyaknight8197]

How sad. I'm glad you are keepin on keepin on.

[@opendstudio7141]

You are probably right about those push rods. It's gonna be a nice tractor when it's complete.