‪@DirtPerfect‬

‪@DirtPerfect‬ decided to drop his trailer off at our shop for some much needed repairs. Be sure to watch the whole thing to see what we get into. This is the first of a 2 part video so be sure to watch the second to see how it all turns out.
‪@DirtPerfect‬ KZbin channel
/ dirtperfect
Facebook
/ candcequipment
Instagram
/ ccequipment
Website
www.ccsurplus.com
Email
[e-mail]

[@dotbearwoodworking9342]

I made mental notes!!!! Lol

[@C_CEQUIPMENT]

Oh snap I was wondering if you were paying attention Lots to see!

[@timothydurm4366]

Nothing to see here, Officer.. lol

[@halloweenchainsawsforgoo]

DP is in trouble now busted.

[@DirtPerfect]

Looks like I found the right shop for this job 😬😝 looking good guys

[@Cedarsman.]

DP you should be proud, these guys are really working perfectly, and they really respect you till they accept this job even they don't working on trailers usually 👍

[@Michael_CS615]

DP - I think you have scared them for life with your trailer. I suggested they have a new business "C&C Equipment and Trailers".... C&C reply was "Trailer shop is closed lol" .... tells you something???

[@daddywoofdawg]

@ 7:15 where the camera is showing the tires you have a screw in the tire

[@six9smoke]

@@daddywoofdawg You can see it better at 7:24.

[@C_CEQUIPMENT]

Thanks

[@terryrogers1025]

I could watch it all day long, no problem with the length. I like the “ do it right” comments and attitude as well as the follow thru on it. Stay the course, looking forward to part 2.

[@C_CEQUIPMENT]

Thanks

[@Letstieoneon3194]

Is this Terry Roger the fishing guide

[@judymahanna4227]

From JUDY and JIMM in Texas NO way We could have done better ,Ya Know how mikey is about $ - ;) JIMM

[@nilskalvik9123]

I seriusly hope you pimped M.r DP's flatbedtrailer with C&C Equipment mudflaps😂

[@C_CEQUIPMENT]

You bet!

[@troymeredith9528]

Perfect opportunity for some free advertisements.almost full rebuild .

[@billvandorn5332]

Like the way you think!

[@kevinfrerichs8589]

DP is going to owe you big time for this, looks like it needs a lot of repair.

[@willb3018]

As was said early on in this video, maybe a new trailer (new to DP I inferred) is in order. Anything can be fixed, but......

[@Losttoanyreason]

He will be bleeding green.

[@tonepoem4438]

25 years from now that same lowboy trailer will be back again for further repairs?

[@carlthor91]

@@tonepoem4438 All depends on how much salt he runs it through in the winters.

[@dennymarreesr6187]

You guys do really good work Clinton!! It’s good to see people that actually take pride in their work! Thank you sir!

[@C_CEQUIPMENT]

Thanks

[@bradstubbings9871]

Awesome job and video. I don't care if the videos are 45 minutes or 2 hours. Just love watching you guys building things ❤️. Would like to see you build a trailer from scratch. Can't wait to see the camper truck. Keep up the awesome videos.

[@C_CEQUIPMENT]

Thanks

[@woodstock048]

Just in case you didn’t already know, you are becoming one of the best channels on KZbin, you are an artist. Good job!

[@C_CEQUIPMENT]

😁

[@lancemartin1153]

More videos like this one please. Loving the channel. Cant wait for part 2.

[@C_CEQUIPMENT]

Thanks there coming

[@travelingbadger]

35 to 45 min. videos are just about perfect, I don't mind longer ones though. I love the pride you take in your work. Unfortunately there is just not a lot of that these days.

[@briankaitschuck125]

Clint you do remarkable work. You don't skip a beat. I'm sure Mike from DP will love what your doing to his lowboy. I'm also sure your workmanship is better than what another trailer shop would do. Mike made a great friend that's for darn sure. You should paint the frame all up and give DP a big bill for making you do the trailer you do not do it's your kindness that is getting that job done. I love to see your videos make them longer.

[@daviddeering1101]

Enjoy seeing craftsman do their trade, good to see you helping Mike out, look forward to seeing the completed job.

[@coldcaribbean]

I love these rebuild videos. Mike's going to have a sweet trailer when it's done! Looking forward to part 2

[@C_CEQUIPMENT]

Thanks

[@robertironside3166]

Definitely like the longer videos. I'm crippled up with a lot of pain and will load up a list for the night and like to watch when I can't sleep [which is most nights]. So ya, the longer the better and the content tends to be more detailed when it comes to the maintainence videos. All good stuff Clint. I'm enjoying these videos a lot.

[@michaelhermes1519]

Nice to see friends helping friends! Helping Dirtperfect

[@Letstieoneon3194]

1 hour of this kind of content is just right for me. DP is like my x wife, just keep showing up at the door , only he brings money instead of taking. You boys are cooler than cat shit in Feb.

[@C_CEQUIPMENT]

😂

[@johncambra9332]

You guys are real pros, both in technic and craftsmanship. With all the correct tools and expertise, fabrication is spot on. I like the forward-looking with the painting of the backsides overall great work.

[@michaelmoran6861]

Great video. I can see why DP wanted your help. I was glad to see the sand blasting cabinet being used properly. About 5 years ago I came across someone who was sand blasting granite grave headstones and the granite was too big for the cabinet. He disabled the interlocking guard on the cabinet and just draped a sheet over the granite when it was being sand blasted. He didn't care that he was exposing his workers to silica dust. It came back to bite him on the backside, after a worker quit in disgust and reported him to the UK Health and Safety Executive. A nice large fine and prohibition order followed. Cheers Michael (from Scotland)

[@innertubemac]

I enjoy your videos , long or short there always interesting and real work . Good to see your fabrication skills and workshop tools .😀👍

[@samtorres711]

You Guys remind me of the old days when people were proud to their best of their jobs.

[@matta3888]

Sam Torres, You are describing an old Army standard. Do your best for the government.

[@genegoodman5233]

I don’t like 5 minutes, anything else is ok. Your the first person to say rust converter on Ytube. I started using it 30 years ago, helping my son restore an old Chevy pickup. Replaced a lot of the floorboard and used a lot of converter to stop and convert the rust to a primer. Told a lot of people and ytubers about it. I like watching your videos cause you help do the work and explain what/why your doing it. I like your floor jacks, looks better than a hydraulic or post, put them where you want to. Stay safe Charge him20% extra, he can afford it hahaha

[@w056007568]

I find this type of work most interesting and frankly educational from the initial inspection through more thorough investigation and subsequent repair. Those U bolts were quite frightening when you see the extent of the damage caused by corrosion. That plasma table and press are just something else!! - Precision work and such a time saver

[@Losttoanyreason]

Yes, the U bolts were down right scary.

[@kevinlamarr1424]

I bought a 1974 Muv all lowboy trailer and I want to strip it down completely, get it sandblasted then I’ll rewire it and repack the cylinders for the dove tail. All that to say, I like the longer videos that show all of the tear down and explain the how and why of everything. It has 8.25 R 15 on split rings.

[@billlewis4554]

Love the step by step detail. You didn’t skip over much and come back and it’s done. Nice to see it one step at a time. Great job. Do it right one time.

[@donnal.oglesby4806]

Clint, knowing you don;t USUALLY work on trailers, but so glad you did, to help Mike [ Dirt perfect ] out, since this job, in one of his more recent videos that he droped just a day or so ago, when he bought a JRB lift for scrap price from a dealer in his area, it TORE us most of the boards on this exact trailer.. What a mess it is currenly. Thinking maybe heavy diamond plate on it,??I found this video VERY interesting. sadly with all the salt on the roads during the winter, and running this trailer dsuring thr winter, is how the salts eats away and promotes to all the rest..This video showed all the talent and Knowlege that you have, from inspection to parts to weilding, and your sttention to detail on everything concerning this trailer and to keep Mike safe when using it.

[@johnwatts5690]

It is impressive watching you and your guys work. You are so conscientious about you work. I can see why you have done so well! Keep it up!

[@dennislaws5187]

I am near 70 been doing this kind of stuff all my life, infact still at it I just finished building a portable bandsaw sawmill with my hands from a pile of steel and parts.. I wish I lived near you folks.

[@scottdominguez7939]

Great job brother I do like your videos and it's good to adventure outside the norm.

[@C_CEQUIPMENT]

Thanks

[@gangstabunny4lyfe]

I love watching you and the boys work you are a real craftsman and your crew is amazing to see.

[@michaeladams8532]

I bet the change is what you and the boysdid was nice in a way.Am so impressed with your shop/business and way you all roll.Thank you for sharing your profession.

[@ericduck8273]

It is so good to see that you go a step or two further than the minimum, because it is so much easier to fix now than have to fix something else a year or two from now.

[@michaelsaintjohn3503]

Hey Clint!! Awesome job as usual, you guys are good at what you do, true professionals. The humor is a hoot. When you, Kevin & Mike get together there’s sure to be some laughter, I don’t mind the long videos their very entertaining keep the videos coming Mike.

[@Tom_Monahan]

Can’t wait to see the finished product!

[@garyjustliving3963]

Anyone else see the Phillips screw in front left lowboy tire lol. Great video .

[@donaldcralton34]

looks good Clinton, I've done a few of those in my day, retired from the coal mines now; but it did bring back some memories of the work and good men I've worked with. thanks! good content.

[@C_CEQUIPMENT]

Thanks for watching

[@kopenhagenkid]

Great video Clint good luck fixing Dirt Perfect trailer

[@fred-cm2dc]

great job so far , I think I would go one step more after paint I would use some wool wax or fluid film on the painted parts before putting air bags ,tail lights in

[@clintonwiles5451]

Be blaster got a product that’s suppose to be better than wool wax or fluid film. Clint and his crew is doing a good job on DP’s trailer I’m sure Mike will satisfied

[@Dmenbiker]

Your attention to detail is special... Few show such passion for perfection...

[@billyjones1969]

Great videos and nice work on it and the length of time is great can't wait until the next one

[@C_CEQUIPMENT]

Thanks

[@DaleDirt]

Mike is a smart guy .He knows you will do a great job over and above . Even though this repair will cost several thousand dollars , it's cheap compared to the longevity you just put back into service of this trailer . It's always best to let the pro's do what the pro's do . Don't worry about how long the video's are , it's good stuff and we do appreciate it .

[@kwshilts]

Your videos are great. I am glad I subscribed to your channel. You and your team do great work and you take pride in whatever you work on

[@C_CEQUIPMENT]

Thanks

[@vicstevens1186]

Another excellent video, Clint. Your videos are never too long. Keep them coming!

[@jimwesselman]

Clint, love your work ethic! Let the video role. The old trailer is finally getting some TLC, it has to look good too, don't want the 850J to ride on a piece of crap! Just needs some Fluid Film on its' bottom to keep it from getting rusty, which I have 5 gallons of and would be happy to come up and spray it on at no cost if you would think it's worthwhile!

[@C_CEQUIPMENT]

Thanks You have to talk to dp about that

[@rickpabalis7987]

Clint I can't tell you how much I enjoyed this video.I have watched a lot of yours but found this one addicting. Looking forward to number two.

[@Jameson4327]

Personally I like the videos broken up. I do like being able to have the second part to be able to watch it. There’s nothing worse waiting a week or longer for the second part. DP

[@michaelmahoney5885]

Great help when no one else would respond. Makes your videos more interesting to watch. The mechanics overall are interesting to watch and appreciate if you own a trailer like this. Thanks for doing.👍

[@C_CEQUIPMENT]

Glad to help

[@reedburke7762]

“Serious weight reduction going on here!” Love it Clint! Taking care on Mike, love that too.

[@The-Deadbolt-Deputy]

Doesn’t take long to figure out that when you guys do something, you do it RITE !!! I like this kinda stuff. Now I fully understand how these trailer brakes work. Thanks Guys. (Seth from North Carolina)

[@PatrickBaldwin1]

Did you fix the screw in the tire that you can see in the tire at 7:09

[@scottsorter7]

also at 648

[@PatrickBaldwin1]

@@scottsorter7 yeah there's another one a little bit longer into the video too. I think it totally like four times it shows up as it's rolling in the shop

[@C_CEQUIPMENT]

Yep Good eye watch the second video!

[@latisimusd]

It seems "more often than not" that the right most rear shackle/leaf assembly has the most rust damage. I know that on cars I've seen/repaired the right rears swell so much it pushed the ABS sensor ring off the hub. Long trailers would be worse since they're getting the heavy blast of the brine-salt-gravel peening that shackle housing and Rust jacking it open "due to salt and brine it's lots of crusty dollar$ time". Great assessment of that low boy brakes/suspension. Joy to watch you fellas!

[@samb3706]

DP will have a hard time accepting a "good as new" repair, as opposed to his usual "fix the broken stuff" repair. You are exploring virgin territories!

[@DirtPerfect]

Sorry Sam don’t understand that comment at all plz explain thanks

[@samb3706]

@@DirtPerfect What I was driving at is that you have a business to run, so your repair philosophy has to be "fix what is broken and let's get back to work", while this C & C overhaul is more like acquiring a new or totally reconditioned piece of equipment. No offense was intended, it is just that this overhaul [and the 850J] are new experiences for the DP company.

[@woodydowler1594]

At 79 I'm learning a lot about welding among other things like helping you fellow contractors. Very enjoyable.

[@edwardgaskin4245]

Clint great job welding all those plates up. Looking good

[@flipflop4364]

Love your attention to detail. Keep the videos coming. Man you do stuff the right way wish you lived closer to Texas.

[@C_CEQUIPMENT]

Thanks

[@gordontyrer2039]

I enjoy watching y’all repairing that trailer or any piece of equipment. I have learned a lot as well. When you get done it’s going to look like a new trailer and you shouldn’t have any trouble with DOT either! I like what I see and the owner should feel the same. You guys do it right the first time and that is the right result.

[@ep9360]

Agree with Terry, could just watch all night long. Whatever you guyz are doing is entertaining and educational. ❤

[@jred4421]

Another one here whom can watch this type of content all day long...IMHO, this video is not long at all. Amazing attention to detail. Recently new to the channel, and catching up on the past videos. Great stuff Clint to you and your team!

[@C_CEQUIPMENT]

Glad you enjoyed it!

[@2chipped]

I don't mind a full hr long. Quality repairs shine through in HD. In the see how fast we can do it society, its nice to see it being done right!

[@michaelmahoney5885]

Amazed at all your metal fabrication skills

[@albertdouglas7477]

Great work. Love the banter between you kevin and mike.

[@jackreed3445]

Nice shop, great lifts! I did notice a screw in the one tire when you had the camera situated on the frame as you were backing the trailer in. If you remove that you will save Capt. Kleeman some work. It's good to see a shop that does good work and is careful to take a look at everything. jack

[@forthrightnight]

Watched every minute! On to part 2.

[@jameszivko5531]

A half hour or so video sounds just great. Keep up the good work.

[@jackgreen412]

Always enjoy these!

[@jwg19444]

👍Looks like a pretty thorough assessment and good quality clean up and fabrication work. I used to be skeptical about the rust converters until I did a pair of rusted and pitted boat trailer fenders. 2 coats of rust reformer and a coat of red rust-o-leum. lasted 20+ years before rust returned. Not bad for salt water use and road salt heavy area.

[@LIFEISHARDSTUPID]

#CandCequipment it's nice to see the owner working and working side by side with the employees. You don't see that to much anymore. It's a Morale booster for the entire shop. I could watch longer videos but that's my opinion. I like this kinda work and I learn as well. You have an awesome group of guys and all talented in there craft. This kinda work shows how universal you are and gets ya more clientele. Take care and I'll be waiting for part 2 of this series. God bless and stay SAFE 🦅🇺🇸🦅

[@ggreenlee19]

Clinton regardless of what you say you do know what you are doing. Love to watch you guys work.

[@C_CEQUIPMENT]

Thanks

[@thomasdesmond2248]

Kevin is so easily entertained. Lol God bless

[@CaptainKleeman]

stopped by and looked at the trailer the other day, looks AWESOME!... i mean all of it looked good on pre trip a couple weeks ago, crazy all that showed up in that short of a time period...great video too. look forward to more.

[@C_CEQUIPMENT]

Thanks Everyone keeps telling me to make sure it Kleeman proof 🤷🏼‍♂️😂🤣

[@Fault.Current]

Didn't seem like it was that long of a video. So many different tasks being accomplished that it really broke it up and kept it interesting. Literally looked at how much time was left on video 30 seconds before you brought up the length. I was hoping for more but will have to wait for the next one

[@jerrymclean8075]

I love the longer videos!!!!

[@Froggy_Devil]

I sure am glad DP found you, let us find you. Looks great. Can't wait for part 2...

[@JCrook1028]

I like the long videos like this. Perfect length to me.

[@golfer963]

Awesome video. We could tell you take pride in your work. And because you stood behind dirt perfect 1st dozer. You will have plenty of work to do

[@dansbrown1313]

Thanks Clinton! This was another demonstration video showing your skills and work ethic. I'm a fuss budget so if I were Mike I would have asked that both tail light brackets were new. :) The video length you provide is perfect for me.

[@C_CEQUIPMENT]

Thanks

[@leer-winnobbeefarms2131]

Rust, the enemy of equipment owners! Good to see you taking care of a lot of rusted stuff on Mike's trailer. I'm here to tell you they don't do a good job of painting trailers. Then add, all the sitting outside in the elements you have the perfect storm for rust to wreck havoc. Thanks, Clint & Crew. Lee

[@C_CEQUIPMENT]

For sure Thanks

[@justinhenry8745]

U r an awesome person thank u for helping dirt perfect

[@doug9418]

45 minutes to 1 hr? I just enjoy how you guys working together, no1 gets in anyone's way, each knows what he's doing. God Bless and have a great day. 🇺🇸

[@robertbrady9597]

awesome job on the lowboy

[@C_CEQUIPMENT]

Thanks

[@domthomas1002]

I have been watching your website for about 5 years. I was always interested in building a bugout vehicle. Just never had the time. You do great work. Keep your videos coming.

[@joesphlavietes5085]

it was how u exsplane the project .it was nice to hear. thankyou.

[@oldsmokeeater7075]

The length is just about right! Boy your work is excellent, the do it right in actions speaks volumes of your professiional work. Mike is getting a quality rebuilt trailer. You have the knowledge it is obvious and the supporting equipment to tackle the job.

[@C_CEQUIPMENT]

Thanks

[@2xKTfc]

With all the bolt-on parts renewed, the only thing Dirt Perfect still needs for the trailer is a new frame. The rig is a little rough. Good work going over it with a critical eye, stuff like that has no business being on the road looking the way it did coming in the shop.

[@merlepatterson]

Those upper stitch welds allowed dirt and water to get up inside of that rear angled trailer end braces. One suggestion which was handed down to me while using press brakes with small parts is to put them in the middle of the press brake so no torsion loads are placed on the press brake rams and attachment points.

[@C_CEQUIPMENT]

Good to know

[@cliffthelondoncabbie]

wow i live for this stuff, the smell of grinding the crap off and welding new metal in. found you because of dirt perfect and sooo glad i have, Its 👍👍👍great way to spend a saturday afternoon instead of gardening lol

[@larryrenshaw1597]

As an ex army engineer and old time oil field trucker of the have to fabricate and build your own time, it is great to see not only the new technologies of cutting and shaping steel but the obvious kinowhow and experience of actually knowing how to do the job......New subscriber but really starting to enjoy your channel......Living down in australia now but enjoy keeping up with what goes on over there......Keep up the great work......

[@C_CEQUIPMENT]

Thanks And thanks for watching

[@lesr5737]

Once I found your Channel I went back and watched all your videos that I could find I make it took all day Sunday LOL. You been doing perfect so far don't change a thing

[@C_CEQUIPMENT]

thanks

[@joedoakes8307]

Great work and demonstration of shop skills !!!

[@stephenmeeks684]

Great camera work on @dirtperfect trailer.

[@sparksmach1]

Definitely don't mind the longer videos! Keep em coming haha

[@Anonymous..VQ3.5Lg35]

Lmao the forklift exhaust is hilarious!!! Hell yeah!! 😂😂

[@MishaDaBear]

My thoughts, DP, if the service centre operates on logged time and not book time spray down all bolts with Move-It or another pennatrant to speed the job as much as possible. If the centre charges by the repair book, those places like most auto centres are on their own. I know that you just aquired that trailer, but with that said I would recommend using some undercoat (Rust Check, Fluid Film etc) around places like behind the newly replaced plates, light mounts, and anywhere water (salt) or rain may sit.

[@mikenixon9164]

Videos are a good length. Fill that trailer up for Mike. Good video.

[@C_CEQUIPMENT]

Thanks

[@themoondoggie1]

Quality, supreme, ultra, deluxe content for us armchair and other mechanics to watch and learn. I like to watch videos that are at least 45 minutes to 1 hour long or longer. Great video content. Thanks to the Dirt Perfect KZbin channel for leading me here and Thank You for sharing.

[@C_CEQUIPMENT]

Thanks for watching

[@edhammond8709]

Nice fabrication job and rebuild brings back memories of our shop

[@lordbyrom100]

I could watch it all day long too !and …..we can pause it if the boss tells us to !! Find your work great to watch happy with and decision you make 👍👍👍👍👍

[@jceworld1]

Good job all the way around, including the video. Keep them coming.

[@C_CEQUIPMENT]

Thanks

[@73DiamondReo]

nice work. i just bought a lowboy a few days ago. probably be going through some of the same stuff

[@C_CEQUIPMENT]

Fun times

[@danielfield3580]

I Iike seeing the main man out there with his employees. Your men appreciate you, I'm sure! Conceniencious owner and employees makes for quality work!

[@gardnermiller6820]

Excellent work! I don't mind 30 minute to an hour long videos.

[@C_CEQUIPMENT]

Thanks