DIY Cummins Swap - Our HD High Mount AC Bracket Kit

Let's unbox our high mount kit! By popular demand, here's a tour of our HD High Mount kit and an install demo. Our B-Series Cummins HD High Mount AC Bracket Kit provides a solution to the common low AC compressor mounting issues that have plagued Cummins swaps for years. In this video, we’ll show you exactly what you’ll get when you order the kit, as well as a demonstration of how the kit is installed.
Buy your HD High Mount AC Kits here: adventurevehiclesnw.com/shop/...
Doing a DIY diesel swap? Check out our products here:
GM DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
LAND CRUISER DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
UNIVERSAL DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
Thanks for your support!

[@Fixinjunk]

Cool video! glad to see Cummins swap parts like this are being made by someone.

[@PenningtonFab]

Wow, I just got my kit. The customer service is awsome. All of the videos are great and very helpful. This is definitely a Great Company to deal with. Thank You Very Much.

[@Jonesys]

Thanks so much Michael!

[@lanceroark6386]

Just got my kit in the mail yesterday.....and a card. Thanks, Jonesy’s!

[@ricardojones9994]

How to get to jonesy

[@dante04srt]

Hey Joel, I'll be getting back in touch about the brackets/parts goes my 98 K3500 swap today or tomorrow. The family and I decided on a last minute camping trip so I've been out of town the last few days. Thx

[@JuanMendez-dg4qt]

when you guys will have this kit available again? thanks

[@ArcticAstrophysics]

Doing a 12v cummins swap into my 84 dodge ram this year already have the donor truck, I can't wait to buy this kit, it will put the a/c compressor right in the same spot as it is on my 318 so hopefully I can run the same custom made hoses I had made. Running a Sanden 508 compressor now, do they make a Sanden SD7H15 with the same inlet and outlet as a Sanden 508?

[@enriquetorres6069]

Cant wait to do a Cummins swap on my suburban k2500 🤟🤟

[@dante04srt]

Finally got my AVNW high mount kit mounted and all of accessories bolted up. The fact that it uses a stock Cummins length belt is a plus. Can't wait to get the rad/IC in the truck and plumbed and finally get to drive it!!

[@Jonesys]

So happy to hear that! And good work getting it done.

[@ryangarrett7281]

Wasn't fun getting that belt on though was it? Tight fit

[@MrBryantharrison87]

@@Jonesys are y’all still in business

[@davidcunningham7614]

I want to add that High bracket design for a 48 volt alternator to charge my battery bank, instead of AC. I have a 2000 Cummins 4Bt in my food truck and keep the 12 volt original for starting

[@elielhernandez2465]

Awesome 👍

[@Jonesys]

Thanks for the support!

[@PoorBoyGarage]

Do you have a kit with the stock 90 upper housing for use with and stock 95 set up?

[@paulhyde4979]

U have to run a 2nd gen fan hub pulley bracket for this kit to work of can I continue to use my 1st gen fan hub pulley bracket??

[@andy112782]

I have a 2000 c3500 obs this kit uses the dodge ac compressor do you have conversion lines to go from the dodge compressor to the Chevy side

[@kevinhail2187]

I'm wanting to use my ac compressor that was on my 6.0 and put it on the 5.9 6bt non intercooled 12 valve cummins do you make the bracket or can I use the stock 6.0 bracket. What's the best way

[@Dakota_Conrad]

Is there a water inlet that turns 90° straight down?

[@diyoregonnowtexas9202]

Today I picked up a 1993 12v I want to put into my Chevy k3500 truck. The truck has the 5 speed manual. I understand the shaft on the transmission will not fit with the cummins, but I can replace the shaft with correct tooth pattern. Is that correct? If so, do you sell the shaft or kit I need for this?

[@PeterHatch-mx7zc]

Great I think you could help out on this for my build

[@Jonesys]

You can purchase this bracket here: adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins-hd-high-mount-ac-bracket-kit/

[@h1_maniac153]

Will this work on a 6.7?

[@Southy318]

Do you still make this kit for 24v

[@carlosadame4405]

A I have a cuestión am about to do a swap on my Chevy can you help me

[@dante04srt]

Do the Dodge/Cummins compressor use the same mounting pattern as the mid-mount compressor?

[@Jonesys]

Same bolt pattern but different belt offset. They will not interchange.

[@richardstamp2410]

Will this kit also work on a 5.9 24v front engine mount as used on BlueBird school buses?

[@wadebond7679]

He addresses it in the video..24 valve upper water outlet is different

[@kingchristoferobin4356]

I'm trying to find an ac compressor bracket for a 2000 5.9 cummins motor. Cummins said its a ford part. Can anyone help me

[@Jonesys]

adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/24-valve-b-series-cummins-hd-high-mount-ac-bracket-kit/

[@Colchero5310]

This change is for ford 1997 with cummins 5.9 12 first generation and what is the part number and where can I buy ........... thanks

[@Jonesys]

adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins-hd-high-mount-ac-bracket-kit/

[@JohnSmith-qj4cf]

Could you give me the site to buy your parts please I need that bracket

[@Jonesys]

Sure thing, the site is www.adventurevehiclesnw.com and the kit is found directly at adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins…t-ac-bracket-kit/ Thanks!

[@JohnSmith-qj4cf]

@@Jonesys thank you!!

[@ricardojones9994]

I need this kit where can i get one

[@Jonesys]

www.adventurevehiclesnw.com

[@ricardojones9994]

@@Jonesys can i get your email are contact number?

[@rafaelesantamaria6653]

How can I get that kit?

[@Jonesys]

Here you go: adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins-hd-high-mount-ac-bracket-kit/