How to Apply Yorkshire Grit Abrasive Paste

Applying Yorkshire Grit abrasive paste to wood is a great way to achieve a smooth and polished finish on your woodturning projects. To begin, make sure your wood is sanded to at least 240 grit and free of any dust or debris. Apply a small amount of Yorkshire Grit to your wood and work it into the surface using a cloth or paper towel, being sure to rub it in thoroughly. Once the paste has been evenly distributed, use a clean cloth to buff the wood, using moderate pressure and working in the direction of the wood grain. Continue buffing until the wood has a smooth, glossy finish. Finally, remove any excess paste with a clean cloth and enjoy the beautiful, polished surface of your wood project. Remember to always wear appropriate safety gear and work in a well-ventilated area.
Get your Yorkshire Grit Here:
USA: www.northsidecustomcrafts.com...
Rest of World: www.easywoodtools.com/shop-la...
Patreon: / jpwoodwork
Huge thanks to Jake Thompson, Joey Gonzalez, Cindy Keough, Andrew Moran Carl Jacobson, Ashley, Martin Breece, Matt Wackerle Josh Morris
Tools i use: www.northsidecustomcrafts.com...
Resin Molds/Resin Blanks: www.northsidecustomcrafts.com...
RZ Mask: www.awin1.com/cread.php?awinmi...
GET 10% OFF SHADOW FOAM INSERTS USING CODE 'JPWOODWORK' AT CHECKOUT........ www.shadowfoam.com/ref/15/
Music from Epidemic Sounds: www.epidemicsound.com/referra...
Video Editing Software i use: filmora.wondershare.com/invit...
GET 15% OFF STARBOND CA GLUE BY CLICKING THE LINK BELOW AND USING COUPON CODE 'JP15' AT CHECKOUT
www.starbond.com/?rfsn=370503...
Huge thanks to the supporters of my Channel:
Easy Wood Tools, DREMEL, Niles Bottle Stoppers and Shadow Foam
Easy Wood Tools Chuck Template on Amazon: www.amazon.co.uk/dp/B08DTVW18...
Email : [e-mail]
Facebook Page: / jpwdwork
Twitter : / jp_woodwork
Instagram : / jp_woodwork
#JPWOODWORK #EASYWOODTOOLS #WOODTURNING

[@ConnieConnie824]

🥰🥰🥰🥰

[@jpwoodwork]

Thanks Connie

[@HueyLionsheart]

Great bit of direction there JP. Always good to know how to apply correctly to get the best results. Thanks.👍😁

[@jpwoodwork]

Thanks 👍

[@lenshandcraftedwoodsigns6033]

Thank you Jamie for showing how it is done.

[@jpwoodwork]

No problem 👍

[@Anita-B-Creating]

Very nice Jamie. Very useful information.

[@jpwoodwork]

Glad it was helpful!

[@davidhjortnaes2000]

Thanks Jamie. Appreciate the lesson. Bowl looks smooth.

[@jpwoodwork]

No worries buddy, any time

[@broomrider2697]

Fabulous Jamie 😊

[@jpwoodwork]

Thank you! 😊

[@albertdawson6814]

Very nice JP . Thanks for sharing

[@jpwoodwork]

Thanks buddy

[@alangibb3100]

Jamie, thanks for the info mate well done

[@jpwoodwork]

No problem 👍

[@jackthompson5092]

Great video Jamie.

[@jpwoodwork]

Thanks!

[@DougMilleratWoodSpunRound]

Explained well

[@jpwoodwork]

Thanks mate

[@greggmarkham36]

Great stuff I have both of them

[@jpwoodwork]

really is

[@GaryGlass-DriftwoodTurner]

Reeealll smoooth Jamie!

[@jpwoodwork]

reallll smooothhhhhhhh

[@kris_kreations]

🔥💚🔥💚🔥

[@jpwoodwork]

Thanks Krissy Pie

[@billmulholland4140]

Cuz if ya don’t know now ya know lol 👍

[@jpwoodwork]

There ya go

[@imaginegrove]

Jamie, short and sweet, thanks - Have you applied lacquer over Yorkshire? With the beeswax and oil rubbed into the open wood pores, I am concerned about fisheye's. Your thoughts?

[@jpwoodwork]

Yes I have mate, you could always give a wipe over with denatured alcohol after buffing it off but I’ve used lacquer many times and never had a problem

[@imaginegrove]

@@jpwoodwork perfect! many thanks.

[@jasoncampbell6222]

Don't use the word "chatoyance" without knowing what it means, as a fellow northerner (Doncaster) we are already labelled as numpties but using a word to describe something that doesn't fit doesn't help. BTW nice demo of the paste.

[@jpwoodwork]

Lol im not a northerner, I couldn’t be any more southern if I tried, I’m near Dover 😂🤣 thanks a lot

[@JiggsysShed]

There was something different about this video... sure I could hear a bearded man talking... the music choice definitely was different this time 🤣🤣

[@jpwoodwork]

Naaa it was like all the other videos, great music, your hearing is off lol 😂

[@JiggsysShed]

@@jpwoodwork 🤣🤣🤣🤣

[@jpwoodwork]

@@JiggsysShed lol

[@monophoto1]

This may seem picky, but - - - abrasive pastes such as Yorkshire grit are not 'applied'. The term 'apply' implies that the material is put onto the turning, and then left there as part of the finish. But as you point out, abrasive pastes are actually a form of surface preparation - just like sanding - and proper use involves complete removal of any residue before proceeding to next steps. So I think a better description of the process is that the abrasive paste prepares the surface for the final finish.

[@jpwoodwork]

i totally get your point, however, for those that do decide to leave YG as a finish then the term 'apply' would be justified...... whats funny about this comment is, i actually did more than one take on this video and chose to use the word 'Apply' because i thought it sounded more professional, i didnt expect to be called out for it LOL.... I appreciate you watching and giving your input tho