Great Value Cockpit! GT Omega Prime Lite R Review 😀

[@SlightlyMisunderstood]

I bought the regular prime lite after watching your review a few months back. Also bought the prime pedal plate+ with it. It is solid as anything and such a joy to use. Got a MOZA R9 and a 200KG load cell pedal set strapped on. Fantastic rig. Oh and also used your discount code for a decent discount! Your reviews are always on point. Thanks Karl.

[@dominicmatraxia2273]

From your recommendation I brought the lite rig about a year ago and I wouldn’t want anything else absolutely solid even after a year haven’t had to tighten anything up. Well done Karl love your videos 👏

[@KarlGosling]

Great to hear!

[@GTOmegaTV]

Thanks for the review once again Karl!

[@KarlGosling]

No worries!

[@V8chump]

Please get these to U.S warehouses soon!!

[@tabs1913]

Had the prime lite for a couple of years now. Thing has been rock solid. No complaints at all with it and I have a couple of buttkickers attached that haven't shaken anything loose yet. Only minor issue with my purchase is the seat I got with it. Its very comfortable but as a recliner the joint can creak a bit when applying a lot of force to the brake pedal. Using noise cancelling headphones 'fixes' that issue for me but for those who like a heavier brake you might want to get a bucket seat instead. Suspect this might be an issue for any recliner. To get better simulation of suspension forces from the buttkickers I raise my rig off the ground using rubber squares. These make two pivot points (quite wide so supportive) at the center back and center front between the frame and the floor. This is the only reason I'd think twice about choosing this new R version if I had to choose one now. Not sure I'd want to put all that stress on the smaller profile. If you're not planning on doing something funky like that the R version looks great.

[@KarlGosling]

Agreed mate all recliners have this issue and is why buckets exist for those that don't need the adjustment.

[@MrBf1985]

I have been waiting for you to do this review, looking at my first proper rig that needs to fit in my understairs cupboard and I am tempted by this!

[@KarlGosling]

It's pretty solid and quite a small footprint, not too heavy either so might be the way to go mate.

[@DanDiMaggio]

This would be a great option for someone who wanted the rigidness of a profile rig but also wanted to utilize bass shakers. I love bass shakers but I've always found cockpits that use 4080 or larger tend to dull out the feeling of the shakers because they are so stiff. I feel like this would be a great compromise of stiffness while also allowing the effects of the shakers to come through quite well. Great review Karl!

[@KarlGosling]

You need more powerful shakers then Dan! lol

[@DanDiMaggio]

@@KarlGosling Yeah you're right lol

[@7MBoosted]

​@DanDiMaggio good to see you active again!

[@olivxxer.7055]

Ordered one of these for myself, thanks for the review Karl!

[@KarlGosling]

Hope you enjoy it!

[@alexkemp6165]

I’ve been mega pleased with mine. I added a TrakRacer direct DD mount to it for £50 and it’s even better. I just had to cut the profile down slightly as the frame is slightly narrower with top mounting the uprights.

[@TheNielsAlmelo]

Maybe fun to do a end of the year, overview / best value cockpit video :p

[@Beesechurgler]

Just ordered one, thank you for the video, great information as always. Keep up the good work.

[@KarlGosling]

Thanks mate!

[@Langdonz]

Always great seeing a new review by you Karl. You're great!

[@KarlGosling]

I appreciate that!

[@DirEnGrey323]

Loving all these entry level rigs lately! What is that keyboard you use in these videos?

[@KarlGosling]

Cheers mate, one of these amzn.to/4fGiAIh

[@bojador]

I'm sold. The minute I get a new place with extra room I'm getting one of these. Thanks for the review.

[@KarlGosling]

Glad I could help!

[@johnnydesmet11]

Yeahhhh been waiting for this. Thanks Karl

[@KarlGosling]

Hope you enjoyed it!

[@JohnnydeSmet-u6e]

@@KarlGosling Great vid, It does look kind of strange to have the side profiles so tall with the seat so low to the ground. I wonder why they've done that, as if they were lower the whole thing might even fit under a desk. For people like me who don't want their rig out all the time, or want some kind of desk/rig hybrid setup, it could have been the dream.

[@Kevinvdb5]

thanks alot Karl! Because of you I now know this is the rig I want to buy and upgrade later down the line :)

[@KarlGosling]

Great to hear!

[@Big-Sheep]

Great review Karl as always just ordered one used your discount code saved me just over £10 so thanks for that Karl every little bit helps. Have a great day mate. Cheers

[@KarlGosling]

Ah nice, enjoy mate!

[@SpasticSpud]

​@@KarlGoslingremember that horrid ADX firebase A01 from Currys you reviewed a few years back? Well they have a new one, the RS03 for £150, it also has a monitor mount and shifter mount as accessories to buy. It looks to be a massive improvement over the old one. As you've done a couple of budget cockpits recently how about this one?

[@PEPlourde]

This is pretty much the same as the 6 Sigma 6S-Slim Sim Racing Chassis the only thing that is different is the pedal plate mounting brackets. It is a sturdy chassis for a low price.

[@ak-iy4yb]

There is no Prime Lite R in US site to this date. I just purchased Prime Lite. It was over $350. With the seat at $170, it's over 500. Then the shipping was $220 lol. I'm new to this and bought it a few days ago when I was drunk lol. Before that, I had hesitated and gaped at the shipping cost. Prime lite was about the cheapest but quality cockpit I could find. Still you would be slapped with near $900 including everything. Just know what you're getting into. I have an old Thrustmaster wheel and pedals. Looking into the set, it looks like I could spend another $900-1500 in a decent set (I use ps4 to play GT7). The cost is nothing compared with my RC racing days but still this is not a cheap hobby. Good thing is this doesn't really have any recurring cost once you buy the rig and wheel/pedal set. That's of course on the condition that you don't go crazy with all those e breaks, expensive peddals and shifter. Seems like most people play the sim with their computer. You can get away with $1000 to get a full set of computer but then you might want all the accessories to put the keyboard, some crazy looking controllers (I have no idea what those are), TV mount if you want, Triple monitor if you want, vibrator under the seat and so on. This could easily become more than 5 grand expense.

[@andyrachy]

i want this cockpit so bad, come back to Australia GT Omega. i will hold ya stock in my shed and ship it for you LoL, Big love to you Karl, thank you for all you do for us mate you are amazing.

[@KarlGosling]

lol thats a great comment! Maybe they will take you up on the offer?!

[@GTOmegaTV]

How big is your shed? 🤔

[@Andybarney555]

Had the titan for couple years.. just week ago got my G pro base.. at its fine.. solid.. love the titan tubler profile. Looks tidy. Got gt omega matt it sits on fits perfect. Loadcell pedals on about 80kg force.. no flex to worry about.. gt omega stuff is the nuts!!!

[@KarlGosling]

Yeah I've always bee happy for the price.

[@Jbzy3000]

I think the beefier rigs handle the stronger ffb. When you compare same wheel base aland pedals there isn’t a gain by upgrading rigs. I have a simple rig and already wanting to build another one. But for high end equipment. It’s all good though. Great video

[@KarlGosling]

Yes beefier rigs do indeed handle stronger FFB... that is why they exist! 😀

[@stealth-x2995]

Hey Karl! I was debating buying this or the Titan cockpit. Shipping alone is more than the cost of the rig to the USA. Absolutely insane. I ultimately went with the Playseat Trophy and the Logitech G pro Wheel/Pedals after watching your reviews. Everything should be here tomorrow.This is my first Sim Racing Rig. Hopefully I made a good choice. What are your thoughts?? I'm 6'3, ~200lbs. thanks so much for the reviews, they were a big help.

[@KarlGosling]

Yeah they have no US stock so shipping is from the UK mate. Thats all decent enough and you'll enjoy it for sure!

[@jessemcclintic]

215 quid is 270 usd. When I go on the website, it's $360 usd (286 quid), and then the cheapest chair is $206, (163 quid), then $300 bucks to ship to usa.

[@bfife22]

Wait until it becomes available on GT Omegas US site, it will ship from within their US warehouse. Their new products always get listed in Europe first

[@jessemcclintic]

@bfife22 oh I didn't know that ty

[@jessemcclintic]

That's the us site I was on. Just checked

[@KarlGosling]

Yeah they have no US stock right now so it would ship from the UK, hence price.

[@ViaticalTree]

@@jessemcclintic Yep, there was another GT Omega review of Karl’s a while back I got excited about until I saw the US price. Not Karl’s fault, but it is disappointing.

[@-fatal-]

I wish I would have the space for an 80/20 cockpit. This looks great, but I only have a 140x~90 footprint (including the seat), so I have to use a PlaySeat Trophy. Footprint of the cockpit would fit and I'm not too tall, but I see seats are over the back. The Trophy is a great cockpit, but I miss the customizability of the alu rigs :) Thanks for the review Karl, great as always :)

[@KarlGosling]

Ah yeah if space is limited then you have to do what you can mate.

[@jameshumprey4446]

All of your reviews are great. I am looking for a racing rig, GT omega has outrageous shipping cost, Titan, Prime and Prime Lite cost to my location is between 245 and 275 US dollars.

[@KarlGosling]

Yeah they have no US stock so are shipping from the UK.

[@LeoDavidson]

The only reason not to use alu profile is if you can't afford it, and this is so well priced that it's a no-brainer for people who don't want/need something more beef and expensive. Alu profile is so useful for mounting all the stuff you don't even think about when first ordering your rig. Mounts for haptic feedback. Mounts for PSUs and amplifiers. Holders for headphones, keyboards, drinks, phones, etc. And it's easy to design and 3D-print custom mounts that exactly fit your kit, even if it wasn't designed with sim-racing in mind. Alu profile looks less "designed" and more generic than other types of cockpits, because most of it is generic, but the things it lets you do and the amount of lets you adjust everything makes it the best and smartest choice. BTW, Karl, have Fanatec sent you that Bentley wheel to review? Nobody has reviewed it yet, even though it's been on sale for weeks now, which is very weird. I know Will at Boosted had the hardware a while ago but was waiting on software, but the software must be out by now as there are videos of regular people unboxing and using the wheel. (I suspect Will has a big backlog, but keep wondering why nobody else has been sent them for review. Like, is something wrong with the wheel?)

[@KarlGosling]

Not everyone likes the industrial look of profile, tubular is much nicer in some eyes! But yes it's benefits are unmatched for sure! :D No mate Fanatac have had no review stock for months (Physical product promotion was put on hold whilst the insolvency was sorted out) but now Corsair are in the driving seat this is set to change.

[@LeoDavidson]

@@KarlGosling Totally true, at least at first. Once you bolt enough on, you can't see much of the profile. :D It was hard to understand how good profile was until I had something else first and then started to want to add things that were trivial with profile but really hard with the rig I had. I wish I had gone straight to profile. Ta for the info about Fanatec! So far Corsair seem to be doing a good job fixing things. Fingers crossed they get back on track.

[@ben3458]

It makes me wonder if someone could make an ultra-budget profile rig using 4040 everywhere - even for the wheel uprights. Might not be as strong as 4080 but you'd think it'd still be stronger than the parts used on the likes of the ART and similar.

[@bennyking572]

The timing on this video was ideal. I priced up doing a diy build but this is amazing value and is very close to my price. I just need to wait until it's back in stock and I will get this :) Also to add some extra strength to the uprights, you could buy some t plates from Amazon and bolt them on :)

[@KarlGosling]

Exactly, when the cost is close you may as well save yourself the hard work.

[@kanethomo2483]

If it comes available in Australia definitely picking one up nice cheap rig tbh surprised me how solid it is.

[@jorgemonegal4994]

Amazing reviews. If you have to chose one between that one, the Titan or Payseat Trophy, not taking acount the price, what would you chose?

[@KarlGosling]

Titan as it has more adjustment and proper seats available.

[@nonflyingfinn2173]

Looks like a good budget rig which you can fix yourself for really cheap.

[@johnp-k9441]

Karl, thanks for the review! I don't need a shifter and I currently have a T 300 Wheel, not even a direct drive and I don't see myself having one with > 15nm in the future. Is there a reason to get the Lite instead of the Lite R or what would be a reason to get the Lite instead of the Lite R? What's important for me that my son and me can both use it easily, but I understand that the seat slider is included in both.

[@KarlGosling]

No reason to go Lite, the Lite R will do you just fine.

[@gartenjoe3997]

This seems to be a great entry cockpit, if you plan on upgrading later on.

[@FormulaProg]

I love to get this but unfortunately by the time I can afford it. Obviously the black Friday sale won't be there so I'll probably end up getting that next level racing entry level one that you reviewed I think last week.

[@KarlGosling]

Thats still a decent rig for the price mate.

[@arachno000]

im just really impressed for how cheap they can do those entry level rigs.. like.. this rig is 220€ (without a seat but to be fair you just can slam any 50€ car seat on this) ... its hilarious but still perform rather great.. like you barely see any movement.. well only if Karl throws his idk 80kg weight into it .. just insane

[@KarlGosling]

Yeah it's great value! 85kg so very close mate! lol

[@supercededman]

Great review, Karl. I[m not in the market for a rig, but this looks great value. I'm gonna ask others if they can tell me if GT Omega ship to Australia. I have a couple of friends looking at new rigs.

[@KarlGosling]

I don't think they so mate.

[@TrueDistrok]

I was just about to buy one but was unsure, now im definatly going to thanks to your review

[@KarlGosling]

Enjoy mate!

[@chaseshadow]

Man's crushing it!

[@joaoalmeida1441]

brough this one cause of your 1st review ablsulutely love it sturdy as hell and can always and extras

[@KarlGosling]

Great to hear!

[@reviewforthetube6485]

Truely all a sim racer needs 😉

[@loganday7522]

Why is the prime lite on the sight (with shifter mount) but not the one you reviewed in the video? I clicked on link posted in the description and only can find the prime lite. As of now I’m only playing sims with no need for shifter and want to focus on fundamentals without shifting, so really would like the lite R and maybe down the road add the shifter mount and shifter once that comes into budget and the necessity for it! Cheers and thanks in advance for any commenters for your help or your help Karl!

[@KarlGosling]

The Lite R is on the UK site but currently out of stock mate.

[@simracingcentral10]

Hi Karl. I recently bought the GT Omega PRIME Lite cockpit after watching your great review! There is just one issue. When I went to order a seat with it, I noticed that all the bucket seats were out of stock. Is it usually like this? Do you have an idea of when they're likely to restock? Also one more thing. I like a decently firm brake pedal. (Right around 110kg of force) Are the recliner seats even worth considering with this in mind? I'm wondering since I've seen a pretty big amount of flex in these seats when pushing on the brake pedal. Thank you in advance! :)

[@KarlGosling]

Stock comes and goes mate, running low or out happens fairly regularly but then so does a restock. Yes all recliners flex under hard braking, for me I don't mind but if you're sensitive to it then maybe wait for a bucket.

[@simracingcentral10]

@KarlGosling I appreciate you for taking the time to reply to me and giving me your input. Thanks Karl. 👊

[@Joakim_Johansson]

Would be fun to see how it handles the Invicta wheelbase 😊

[@KarlGosling]

Oh it would definitely flex, but who realistically runs their wheel base at 27nm?! I run at about 10-12nm.

[@stevewilden5769]

Thanks for the review and code just ordered one 👍

[@KarlGosling]

Hope you enjoy it!

[@jasongray6030]

Hi Karl, been waiting for this since I saw it GT Omegas website! Just a few questions though Which is best between this, the DD-X with seat add on and the playseat trophy? Could you in theory "upgrade" the prime lite r to make it stronger? And lastly, do you think this could handle a moza r12/r16? Thanks for reading

[@KarlGosling]

This is the best of the three and yes if needed you could beef it up more just by swapping out bits! R12/R16 would be fine.

[@jasongray6030]

@KarlGosling Thank you for the response. I think my mind is made up for what I will get as a first cockpit

[@mozzamoz]

Hi Karl! Great Review! Which one would you recommend, Prime Lite R or TITAN? Which one would have less flex?

[@KarlGosling]

Flex is about the same (wheel deck is better on this actually) but this is more adjustable and you can bolt anything you like to it.

[@mozzamoz]

@ thank you for your reply. I will be ordering PRIME LITE R then. For 205£ it is a bargain. I’m also getting Thrustmaster T598 to go with it.

[@doifeellucky]

Hi Karl. Great review as always. So you mentioned this is better for those with limited space. How viable is it to store this on its end against a wall with the seat folded down and the wheel base removed? I’ve just bought a 20nm but currently have only a WS2. Initially I’ll just turn it down but was wondering if this being lighter might be more viable for end storage compared to the prime light. Thanks.

[@KarlGosling]

You could easily stand it on it's end but the seats do not fold flat.

[@doifeellucky]

@KarlGosling Thanks for the feedback. I guess if the pedal end was on the floor the seat would fold back far enough to not go above the height of the wheel uprights. As long as it doesn’t stick out too far into the room that’s all I’d need.

[@Alex-fy7sc]

Thank you for this review. I was dead on decided a couple of hours ago on the DD-X (on your recommendation on the victory video) and i didn't even saw this on their site. I was waiting to came back from work to order it but now i'm torn. I'd appreciate your input if you'd go for Prime Lite R or DD-X and what tips the balance for you. I don't know if they are in the same category but for me it's a similar enough price and fit my tight space.

[@KarlGosling]

I would choose this, it's the most solid of the three.

[@Alex-fy7sc]

@@KarlGosling you are a legend! Thank you very much for taking time to respond. I honestly haven't seen anyone on youtube do this to every video.

[@deakon7984]

not on US site, wonder if they will add it before Friday

[@KarlGosling]

They have no US stock right now so very doubtful.

[@jacka8952]

Just picked one of these up with your discount code, thanks! Didn't pick up a seat as I'll go with the likes of a sparco or such. Do you know if the CSL v1 with LC will bolt directly to the tray as I see they sell an adapter plate? Cheers

[@KarlGosling]

Nice! Yes I'm pretty certain it does but don't hold me to it! lol

[@jacka8952]

@@KarlGosling Hi mate, just to follow this up for the CSL Elite V1 LC, incase anyone asks in the future, it seems you can get 1 nut and bolt in the throttle and 1 in the clutch and NONE in the brake without the adaption plate (2 out of 6 is better than 1 out of 6 I suppose haha), seems sturdy enough tho but will see how I get on with it! Any chance you could show how you run your cable management at all? Cheers mate!

[@Space-O-2001]

I have the Prime Lite and love it except i had to take a drill to the peddle plate for me Asetek pedals

[@KarlGosling]

It always puzzles me when manufactures don't use an existing bolt pattern, they are literally making it difficult for customers with older cockpits?!

[@Space-O-2001]

@@KarlGosling they should get together and create a standard!

[@jaysmith6836]

I have had the prime Lite for just over as year now and have been using the Simforge pedal set with their profile base. I have found that the whole pedal set is flexing so can only assume that the prime base plate is flexing. I have it anchored at the bottom of the plate, do I really neeed to spend out on the plate upgrade?

[@KarlGosling]

If it's fitted to the very front edge of the plate then it shouldn't do... But, if it is then yes a pedal tray upgrade would sort it mate.

[@Deeptronic1990]

Hi Karl, great review. I immediately ordered one and it has been shipped today. But only a small box. Do they ship stuff like that in several different shipments? Thank you so much 🙏🏻

[@KarlGosling]

Thanks mate! No, usually one shipment with multiple boxes.

[@Deeptronic1990]

@ I only got one tracking number but they shipped on two different days. Thanks for your feedback and your great work 🙏🏻

[@TheMstrchf]

Great review, ordered one for £236 delivered using your code :) Upgrading from Apex wheel stand with rear add -on. Maybe a silly question but is it solid enough to use with my Apex caster wheels? Does it come with spare angles, t-nuts, bolts and extra 4080 endcap by any chance? - ordered a length of 300mm 4080 for £16 off ebay to mount a spare Apex shifter plate on so i'm wondering if i need to buy more or if i can save a few quid!) ;)

[@KarlGosling]

I don't know if the castors that came with the Apex will be strong enough, also you would need 6 or 8 really. It came with many nuts a bolts but no spare corner brackets that I can remember.

[@gus-tv6wx]

Did they stop making them or are these rigs not available in the us?

[@KarlGosling]

No US stock mate.

[@eriong.7446]

Wish you tried it with a larger wheelbase. It seems to be ok with 15NM, but is it?

[@KarlGosling]

I exerted WAY more force than any wheelbase would on it in the flex tests mate... But its entry level, for use with entry level wheel bases, it's not going to take big numbers, 15nm will flex a little nut would be fine for most people... if you want something that won't then you go for the Prime Lite.

[@eriong.7446]

@ don’t take it the wrong way, I really appreciate your reviews and I just ordered this. For now I’m using the exact base you tried it with, but I have constant disconnect problems, so I might need to upgrade soon. I was thinking alpha mini or alpha, so it would have been helpful for me if you tried it with a 15 something base. But yours is the only review on this so far and if it wasn’t for you I wouldn’t even know it existed. In my country just the aluminum profile itself would cost almost as much as this thing does and that doesn’t include the wheel and pedal plates and bolts as nuts and the rest. So thanks. It was not criticism just expressing my wishes. :) Edit: Now I'm using it with a Simagic Alpha. In driver at the moment I have it set at 100% power and maximum force 15NM, but in iracing around 40-50% intensity (so around 6.8-7.1 strength setting for the AMG GT3, close to that for SF23 as well). It feels rock solid to me. But before this I used a playseat challenge with the csl DD. That was not that solid, so compared to that it's a HUGE step up. I did try it just for fun set to 100% everywhere, and even than it felt very solid. Hitting kerbs made the connections make a knocking sound sometimes, but I didn't feel any movement in the frame even at max force. Of course it's not that much fun to play like that :)

[@josephlauer8980]

I can't find this on there US website only UK website, is this not available in the United States yet?

[@KarlGosling]

Currently no US stock mate.

[@Deeptronic1990]

Hi Karl, short question. Do you know which t-nuts I need for this rig? I would like to add a shifter arm so I have to order a few more t-nuts but I can‘t figure out which are the correct ones. Thank you in advance 🙏🏻

[@KarlGosling]

M8 For 40mm profile.

[@Deeptronic1990]

@ thanks m8. Hope you feel better after being sick 🙏🏻

[@Jojo123-h7i]

Karl, can you force the screws loose on the wheel deck if push and pull on it?? Just curios if I can stick with with it or get myself a plate for my G-PRO.

[@KarlGosling]

Not if they are done up correctly, we don't actually push/pull like I do in testing and is why I always show things under normal conditions too.

[@joelberglund4638]

Should i buy the GT omega sprint or the NLR Victory? or should i go for something else?. MY budget is max 350 dollars and i dont really care about folding

[@KarlGosling]

Then do not get a folding cockpit! Victory is a good start yes.

[@seebarry4068]

20:00 when i think of 20+ torques, i think of the optimistic 2 torques that the Logitech puts out, and you can feel that. Then i think of my current CSW 2.5 with 8 torques, and that tries to break my thumbs over kerbs, using that mclaren rim. Thats 10x the torques of the Logitech and nearly 3x my CSW. 10x the torques must be violent and frankly intimidating.

[@KarlGosling]

Also mostly useless! lol No no one needs that much power and more power does not translate to more response or detail beyond a certain point (Or sometimes at all!).

[@mikeus77]

Do you think it can take a DD+ with 15nm reasonably well?

[@KarlGosling]

"reasonably well" Yes mate, it won't be 100% solid but thats why it's cheap.

[@mikeus77]

@@KarlGosling Yeah, these budget aluminum profile rigs are pretty good. You should check TR40S from Track Racer as well. Similar price and specs.

[@Chuksfunhouse]

I would love to see a review of Temu pedals

[@KarlGosling]

Really?! lol

[@Chuksfunhouse]

@KarlGosling simjack I think there called 🤔

[@philmarsden9594]

not seeing the lite r on sale in blighty. is it yet or am i just blind?

[@KarlGosling]

Blind! It's at the bottom of the list under "Cockpits" with a bright red "New" beside it! lol

[@CubanBeastt]

I was going to buy this same rig but the shipping to USA is killing it. 250 for shipping is ridiculous when Trax Racer and almost every other company is give you free shipping or less than $50

[@KarlGosling]

Yeah they have no US stock so it would be coming from the UK, hence the shipping price.

[@CubanBeastt]

@KarlGosling shame because I like the rig and their chair. I've tried it before, and it's great

[@xXsuzuki88Xx]

Can't seem to find the Prime Light R on the US website.

[@KarlGosling]

Yeah they have no US stock mate.

[@xXsuzuki88Xx]

@@KarlGoslingI found an alternative called the 6 sigma 6S Slim. Would love to see a comparison with some of there products.

[@mikeychronic35]

Looks great but the seat looks very low, Great review

[@KarlGosling]

The seat is lower than some by 40mm, but also the whole rig looks low because it's on 4040 profile.

[@XavierVillegas-u3z]

do they ship international?? i dindt find how to ship outside US

[@cdunphy457]

Good review how tall dare you

[@KarlGosling]

6ft mate.

[@jessemcclintic]

300 bucks for shipping is crazy. Definitely want this, but that shipping cost is insane

[@KarlGosling]

Yeah thats from the UK so going to be silly high, they have no US stock right now.

[@edwinmasselink1556]

Karl, Prime Lite R or Prime Lite? What would be your choice?

[@KarlGosling]

Prime Lite.

[@nikkiharris-ko2cl]

can you add a monitor to it or free standing one xx

[@KarlGosling]

Yes and yes!

[@toddstrain3629]

I was all set to buy one of these but during checkout....$200 shipping to US. No thanks!

[@KarlGosling]

You're ordering from the UK mate, they have no US stock, hence the shipping.

[@ogdog123]

Can this be made to be foldable?

[@KarlGosling]

No not easily.

[@alanbriggs8201]

Do you think it would handle the Logitech pro wheel

[@KarlGosling]

Yes.

[@tecnocris]

Discount code doesn't work on U.S. site.

[@KarlGosling]

It does, it works worldwide, KG5 or just follow the link... applied at checkout right as you pay.

[@timtim7742]

Can you fit a playseat evolution seat on it?

[@KarlGosling]

No... and why on earth would you want to?! Terrible cockpit! lol

[@adamhalford766]

Can you use the prime integrated monitor mount with this?

[@KarlGosling]

As I said in the review, yes! lol

[@adamhalford766]

@ sorry I must’ve missed that bit! Thanks a lot! :)

[@marcbowyer-briggs2153]

Which seat is the biggest? RS12 or XLRS?

[@KarlGosling]

RS12

[@grahamdoonan869]

i jus made and rig out of 50x 25 box steel for 36euro

[@KarlGosling]

Well done... how well do t-nuts and corner brackets fit in your box section channels?

[@SOCOMHITMAN.]

Too bad it isn't available in the states

[@KarlGosling]

Yup 😞

[@colestaples2010]

Next level has a cockpit like this for $399 with a seat

[@KarlGosling]

The cheapest profile cockpit with a seat on their site is $500 mate.

[@TheGbeaze]

Next level has nothing like this close to $399....

[@seebarry4068]

12:11 you tease!

[@KarlGosling]

😆

[@playerone82]

🎉

[@BlackbirdMoosic]

Genuinely, why would I go for this over the Next Level Racing rig you recently reviewed here? This is like £200 more for what?

[@KarlGosling]

Seat options, rigidity, pedal tray, wheel deck, easy customisation, bolt on accessories, upgradeability.

[@n9ne]

sim gear is getting more affordable by the month.

[@KarlGosling]

It really is with cockpits!

[@Josh-kr1cc]

For 215 I think there's no sense to buy any other beginner cockpit. Should have bought this instead😅

[@KarlGosling]

If you like ally profile then agreed mate!

[@denesk2794]

Imho, a horrible decision to use a 4040 on the bottom. If they used a 4080, it could have been a solid rig with much less flex and only a little extra weight. ...

[@KarlGosling]

You're missing the point mate... If they did that it would have been more expensive and too close to a Prime Lite, this sits perfectly in place for price and performance.

[@OKeefeist]

Hi Karl, could you kindly respond to my comment on the next level racing victory folding video!

[@marki61422]

Doesn't have free shipping

[@KarlGosling]

Correct.

[@nickreestearsofaclown4661]

Some observations on my gt omega lite R, After some heavy use I found the mounting cross section loosened of from the upright sections,I cured this by adding four extra internal angle pieces on the top of the cross section to cure this. Another point my t nuts did not seem to drop in like suggested on the instruction sheet and made things difficult assembling if you missed a t nut somewhere in assembly, then scratching the profile when disassembling to replace missed t nut.