Kawasaki KLX 230 Mod's/Upgrades! Great Beginner Dual Sport

[@jtb8461]

I recently picked up a 2023 klx230r off road only model. Like you, i am surprised by the lack of aftermarket support for this bike. But that's not a problem, except for hand guards and skid plate, I'm leaving it stock. Ricochet makes a nice skid plate for the klx230. Handlebar, levers, and foot pegs may get replaced too after I bend or break them.😊

[@MotoMischiefs]

I agree with you, It is like the little brother of the KLX300 but has better equipment, like the LED headlight. I have yet to find handguards as well. I ordered generic ones and of course, they did not fit ... lol The only other item I wish it had is a gear indicator. Funny enough, there is a space for it in the instrument cluster, not sure why Kawasaki did not enable it.

[@l.a.raustadt518]

Always add some stickers along with some common sense mods looks good! Peace from Minneapolis Minnesota. ✌

[@shannonmcatee9610]

Looks good. Just put a deposit on one today. Happy riding

[@MotoMischiefs]

Congrats! and happy modding ... =) I added a Garmin Zumo XT after the video so I don't get lost anymore ... lol

[@smartacus88]

Good stuff. Gave it a like. Could you please provide links for the bash plate and rear rack?

[@MotoMischiefs]

Both were ebay finds, let me see if I can find them again. The rear rack made a huge difference to have something to hold onto when moving the bike or picking it up, highly recommend.

[@RonniesRambles]

hi, yes looking for that rack also. I like the grab bars

[@41alone]

Replace the front brake line with a braided steel one it has always made a big difference in brake performance to me. YMMV

[@MotoMischiefs]

Thanks for the tip!

[@flatlandriver2471]

Looked everywhere for footpegs like yours. Would you have a link? Biggest improvement to my ‘22 klx230s was a seat concepts upgrade…😏

[@MotoMischiefs]

They are Pivot Pegz, my go to brand. www.pivotpegz.com

[@flatlandriver2471]

@@MotoMischiefs Thank You! “Internally a high quality German made replaceable BUSH is used and ample amounts of a superior quality saltwater proof grease is added”. Of course!

[@uncletom1971]

The KLX 230 is a great bike, I got one myself back in 2020 when it was available here in Sweden, also got myself the original rear rack from Kawasaki. I don't see alot of the KLX230 today here, no new ones :( I'm looking to upgrade my exhaust to some louder and deeper sounding type, what brand would you recommend for the KLX230?

[@MotoMischiefs]

I looked into that as well but the reality is that for some reason despite being a fantastic little bike, it never caught on, hence options are very limited. There are a few options on ebay from China and Thailand but not sure what you are getting there. Sorry, I could not be of more help. I did the air intake mod which changed the noise level somewhat which was good enough for me.

[@hasianmanik8689]

try Norifumi exhaust from Indonesia.

[@uncletom1971]

@@hasianmanik8689 And I don't need to re-map or flash the bike's ECU then? Just swap the pipes? My KLX230 is a 2020 model with ABS, and it has that oxygen sensor on the pipe.

[@hasianmanik8689]

@@uncletom1971 just swap the pipes. Norifumi Whoops for klx 230. Look it up.

[@uncletom1971]

@@hasianmanik8689 Great. Thanks. I'll see if it's on ebay.

[@tommyfan6911]

Do you still have the link for the rear rack, looks like it fits so well!

[@MotoMischiefs]

Sure, here you go. www.ebay.com/itm/154976721465?hash=item2415551a39:g:JaUAAOSwuIlicM5L&amdata=enc%3AAQAIAAAA8D78kch%2BKpfVw9kx2YVnzieVVjQBHji3pTISsAC4WFel%2BfiaWI%2BDqUoqMfpQtEr6E%2FkryzSVeWv%2F3ty0DKo9UBWSgs38mNmw3slLz1sEplY12rQXBz9bI%2FD52rgj0kmo%2FXjCjfiWdKpLp2B5AGcaQiWiVzxebHi4%2FkQOu1Xdzcrbzcb51rpiica2vYPo%2F2dL%2Be06DndnFqPARnvvk2jLURFUWaJyBEXfJZ%2BiEIBsHP3%2FN0As4WO3B53L8qubqD6Zpbn2wNnvbkzxgH14RGYdlXqIjntkhlWH3iPxnvgAx%2FgCw3KE7RXYCXct1REENGqMGw%3D%3D%7Ctkp%3ABk9SR-i8yayWYg

[@tommyfan6911]

@@MotoMischiefs Thank you so much!

[@MotoMischiefs]

@@tommyfan6911 my pleasure!

[@gabrielavrett]

Did you clamp that mirror to the tapped hole for the original on the left side? I wanted to take the mirrors off but I wanted to find use for that tapped hole

[@MotoMischiefs]

Not tapped into but rather using a clamp that is wrapped around it and using a black mirror hole plug to close the opening.

[@NO-WAR-WINGS]

I have the exact bike model as you. Can you tell me what tire pressure you use for street riding please. Thank you.

[@MotoMischiefs]

I am running the specs from Kawasaki, 22PSI in the front and 29PSI in the rear. I am riding 50/50 street/gravel & sand roads and it does just fine. Hope this helps.

[@NO-WAR-WINGS]

@@MotoMischiefs yes Thank you!

[@Tyzxie]

What exhausts would make it louder? I just got one for finishing my rosa and looking to make her a bit louder

[@MotoMischiefs]

There are a bunch of systems on ebay in the 150-300 range. I personally just removed the snorkel from the air intake to give it a bit more growl.

[@exploreit2514]

How comfortable the seat is?

[@MotoMischiefs]

No issues at all, it’s rather decent.

[@exploreit2514]

@@MotoMischiefs thank you , but how long can we drove in a day (in hours)

[@MotoMischiefs]

@@exploreit2514 i did all day riding on it with no issues, including all day ADV courses.

[@exploreit2514]

@@MotoMischiefs thank you sir

[@DanielleKing-n7z]

Wilson Kevin Davis Mark Allen Gary

[@blind153]

Under powered mine bike 😂

[@MotoMischiefs]

It’s enough to putter around … ;)

[@blind153]

@@MotoMischiefs yep it is , I loved riding my mini bike , it just ran forever it was a little billygoat

[@kevindunnell7150]

I stopped listening after you added the music. I want a bike review.

[@MotoMischiefs]

Thanks for watching.