Bank Trout Basics 3: Slip Bobbers

[@yardboy3955]

Thank you! Great basic fundamental setup information, everyone should know this. I’ll use it. With all the tackle out there, this makes it simple and easy to understand. Love the older man fishing, he reminds me of my dad having a good time.

[@danraymond8123]

That slip bobber really ties the room together

[@WhatUpDoe1000]

Heres a tip, if you dont have a bobber stop with you, you can use a tiny splitshot as a bobber stop, as long as your desired depth is less than the length of your rod. It works well.

[@chasthefishman7865]

Great video! I've always used straight fluoro on the reel for bottom rigs as it sinks. For slip bobbers I've always used mono on the reel as it floats - with a fluoro leader.

[@FHSTackle]

Yes that works well...Thanks for watching!!

[@johnknight8846]

*These are easy to use and highly visible **enjoyable.fishing** recommend they are extremely valuable for going from a dead drift set up to a float setup. They save time and you don't have to re-tie everything to add a float to your presentation.*

[@BrookieCooki84]

Slip bobbers are deadly. Love em.

[@onepunch9203]

Thank you. 🌞👍🏼 This is going to be helpful for me as crappies are biting right now in my local lakes.

[@troydarrellclark]

I use a slip bobber without any stops and combine it with either a ned rig or a wacky rig for bass fishing. I let the bait hit the bottom, then give a light tug to get it into motion again and let it fall back down. Do this over and over. I get more drops per cast from the bank without having to recast all the time. Eventually the tugs make the bobber come back to shore and then I recast it out as far as I can and start all over.

[@FHSTackle]

That’s awesome!!

[@Smiththebat]

That’s so smart. Awesome bank angling tip! 🤙🤙 worst part of the bank is snags and depth strike zone access and this helps with both!

[@Smiththebat]

I know this is crazy late but do you have a weed guard on those tiny mosquito hooks???

[@yakingpatton1347]

Nice video man

[@FHSTackle]

Thank You....

[@kevinstinson4318]

Does the Kellogg system work on the east sierra lakes, Mammoth, Convict, Twin lakes at Bridgeport???

[@FHSTackle]

Yes…… Trout are trout are trout…

[@bobgomavitz1330]

Try Thill Weighted Slip Bobbers....cast along ways when using 2 or 4 lbs line. Nothing but Trout Magnets as my lure as I don’t retain fish and they catch everything.

[@thebigroy]

Been trying to find a good float for Trout Magnets. Are these the ones you use? www.cabelas.com/shop/en/thill-pro-series-slip-floats-weighted?ds_e=GOOGLE&ds_c=Shop%7CGeneric%7CAllProducts%7CHigh%7CSSCCatchAll&gclid=CjwKCAiAu8SABhAxEiwAsodSZG9e8nMoIlafLir2F0OtjriqCiQsDhsTQOfOR_aZvr4WvIVp0J_nwRoCvnsQAvD_BwE&gclsrc=aw.ds

[@bobgomavitz1330]

@@thebigroy yes, but I use a different model by Thill now. Cheaper model but is still weighted with a slightly larger body shape with smaller holes. Lob City

[@williamjones3603]

Why did you decide 4lb and a ultra light rod in this video?? Recently, you have been recommending a light action rod with heavier line for more control. Thank you.

[@FHSTackle]

Well I’m lucky to spend thousands of hours on the water. Over time I’ve consistently refined my approaches. Time on the water is the ultimate teacher and I’m not rigid. I always try to employ the best and most effective approach. Also guiding has been a huge influence on my thinking because I get to observe hundreds of anglers per year. I now have a better grasp on what the average skill level of trout anglers in my area… And this influences some of the gear and rigging approaches I take

[@haroldtakahashi8875]

i use, basically, the same set-up, except with a bubble and 2# test...btw, i wanted to see you at the show (well, along with all the other exhibits too), but i got but with a $100 rx co-pay, so that blew my budget for a while, so, there's always next year...tight lines forever...

[@FHSTackle]

Thanks Harold....Hey you get to see me on youtube for free...LOL...

[@TroutWest]

Only issue, you are only getting a rod's length of leader below the surface with this set up. If you use a bubble, with air in it... no stopper.. you can get that bait down 10-20ft below surface. No difference between your set up and a regular bobber.

[@freddiegonz4113]

Slip bobber’s bobber stop can be adjusted up or down

[@PaulHVAC1]

Do you just let it sit and wait?

[@teddyruxpin3811]

how do you set up your bobber to automatically fish a foot off the bottom?

[@freddiegonz4113]

Just tie a bottom sliding rig with a 1 foot leader

[@captwho4u]

Hey Cal, can you tell me where are some good spots for bank fishing at Rollins for trout this time of year. I've heard it's hard to find shoreline because it's so full. Thanks!

[@FHSTackle]

Right now I'd hit that sand beach right there are the Orchard Springs launch ramp...There are lots of marks on the sonar there....

[@captwho4u]

@@FHSTackle Thanks, Ill try that out!

[@kevinleach9631]

Good info ty!

[@FHSTackle]

Thanks for watching!

[@marktaniguchi7901]

Where did you film your location? I'm curious if Frenchman Resv and Hell Hole is still accessible.

[@FHSTackle]

Hi Mark...That was Sugar Pine.....I know some folks go to French Meadows this time of the year on snow mobiles or big 4x4s....Hell Hole is closes...We had a fair amount of snow in the high country last night....So I'm thinking access is extremely limited....

[@justintcm3369]

Do u have any tips for fishing on folsom lake off the bank

[@FHSTackle]

Well use standard stuff....Plug live minnows if you can get them down on those points around the boat ramps....Bobbers and minnows can work well at Folsom

[@justintcm3369]

@@FHSTackle are they still really deep if u know

[@SusheelSRaj]

Thank you so much superb

[@FHSTackle]

Thank you too

[@Cdawg6969]

Y I’m up at 5 watching this I don’t know but I don’t regret it

[@FHSTackle]

Hahahahahahaha...Well I'm up with you...Glad you like it...

[@simonhenhoeffer8934]

The slip bombers I bought sink from the weight of the split shot no matter what weight I'm using talk about useless

[@robertng9330]

use a bigger slip bobber....that will solve the problem. Good luck!

[@everettwhitegoat3414]

Fish ah-choo 🤧