Kia Sorento clock springs replacement

like comments and subscribe and share the love.
help me help you by donations no matter how small it is i really appreciate it here is my link to PayPal send it as if you are sending it to a friend
www.paypal.me/...
thank you for your love and support
links or the tools
21 mm ½" driveamzn.to/2XrmQUR
½ breaker bar amzn.to/2TAERPE
socket set (10mm) amzn.to/2WYOeLd
screw driver amzn.to/2ZzB9cO

[@bernardhamilton1741]

Every part of the video was on point! Once the battery was reconnected I was able to adjust my volume, downloaded my contacts, make calls from my steering wheel buttons and changes stations. My clock was brighter and was not flickering! I had to use a T40 instead of the recommended tools. However, the airbag light did not go away. There may be a sensor issue that may be causing this and may try to do a reset to see if it will go away! Still this was more the worth the instruction that was shared!!

[@JohnDoe-wv5hv]

Thank you for showing that last connector to the rear of clock spring that it was spring loaded. Made all the difference for me. Thanks!

[@iamdel71]

Great video! Just replaced without an issue and you saved me hundreds of $$$ in labor. Thanks

[@Live2Drift]

There is a warranty extension from KIA on these Sorrento's for the clock spring. Call your local dealer before paying for repairs.

[@FishingFloridaWater]

I love how when I replaced my clock spring, I had no problems taking the T30 off. Now I need to take the T30 out again because I need to check the air bag connection to make sure it's not damaged or not all the way connected because of a B134700 code I'm getting now but I can't get the T30 to come loose. So now I gotta try and see if I can find a wrench that has an extension so I can try and break the T30 loose and hopefully now have the Airbag deploy. Tried using my drill with the adapter for the T30 but my drill is so trash it can't break them loose.

[@elitestudio8041]

It was a clear explanation...very simple to understand keep it up!!! thanks you.

[@Ponthel]

Your walk thru helped me figure out what I needed to do to replace the clock spring on my 2017 Sedona. Thanks a bunch!

[@47MasoN47]

Thanks! I needed to replace the blinker stalk on my girlfriend's Sorento and your guide made it super simple!

[@nourdinemazali493]

if you don't have the 22mm socket, you can use the 4way cross wrench you got in your car for changing tyres, and save yourself $$

[@brandonmcmillan9641]

Overall nice video. On my 2011, to get the nut off the steering wheel, I needed a 22mm, not 21mm. And need to save the back part of the old clockspring and attach it to your new clockspring.

[@arpruss]

Great video! One thing I had trouble with was removing the front of the steering wheel after loosening the torx screws all the way, though. On my Sedona, the torx screws are captive, and my driver wasn't pulling them out quite enough to allow the front of the wheel to come off. The trick I found to get the screws out the last bit was to be gently pulling on the loose front of the wheel while unscrewing the torx screws. This lets the thread on them have some purchase and they go out a little bit more and then the front panel comes off.

[@msadriene1]

Thanks so much for your step by step instructions and showing it helped a lot. Now I can change out mines to get my light off.

[@paulw.forget4450]

Just ordered my part online, anxious to take this one on and get my steering controls back.

[@cosprint]

Thanks for the video. We were working on a 2010 Majentice. similar. Turn signal shorted and sent out a puff of smoke

[@edwinnegron7761]

outstanding, I have a 2013 model with the volume/airbag/cruise acting up, for the price will definitely replace this clock spring!!!!!!

[@josepacheco459]

Having the same issue with my 2014 sorento. did get it fixed ?

[@alexbaladad1139]

I have the same issue with my 2014 Sorento. I just called a Kia dealership and they will fix it for free. It can be covered under an extended warranty per TSB WTY003DEALERP.

[@bryanjohnson9833]

Great video. On a 2014 Sorento, the airbag is held in place by a 5mm allen head screw and not a torx30.

[@peterclifford5137]

You just saved me big bucks. Thank you, very well done. 🙏🏼

[@Matanzas0312]

Thank you very much my brother, excellent I really liked your video, I asked for the part and I did it just step by step just following your instructions. Thank you

[@patrickmikesell6351]

Nice vid! Same exact procedure on my Kia Sportage. Thanks!!

[@RusHnRelaX]

Hi there what year was your Sportage my friend has a 07 and there's no videos on the removal of the steering wheel and the replacement of the blinker lever I just want to make sure it's at least similar to the video here and that I can wobble the steering wheel off? Cause some post & videos of other years and models of kia say you need a pulley tool to remove and press the steering wheel on/off the center stud... I appreciate any information/assistance/help given and thank you in advance

[@davidevans9068]

Your presentation was point on thanks ,you the man

[@DM-dm8nu]

Thank you, for sharing, this was one of the most informational step by step videos I have seen:0)

[@JohnnyAngell-yu2tb]

Great help. Thank you very much

[@Israfil-RF]

Thanks brother, It's a very good explanation and very detailed. God bless you.

[@alopez3829]

Thank you!

[@davesandness]

Correction: The required tool for removing the steering wheel airbag is a T30; NOT T34 or 35.

[@Jlim2k2]

I was about to ask if it's a t30 or 40. Thank you for this info.

[@Faithandhopeministry1]

Thank you so much for that great video. Your the best

[@erikrenner]

You could have had the dealership do all this for free. There is a recall on these clock springs.

[@carjbedad369]

I thought this would have fixed my horn but it didn’t… so what could it be? After installing all buttons work in the steering wheel but not the horn

[@Fullrusher]

Yo big up mi general ! Respect fi di wisdom !

[@nxokomfiya]

Very useful and clear procedure. Thank you so much

[@leemann5410]

Great detail on your vid, thanks good work man.

[@patkrimson1294]

Thank you! What About the angle sensor? Didn’t you had to remove it from the original one and place it in the new one?

[@cedvictorious]

Just changed mine today. I looked at this whole vid and he did forget to mention the back part. I actually thought they gave me the wrong part when I notice I didnt have a place to put one of the last plug. Got to looking and sure enough I had to remove the sensor. Great vid tho. Really took the guess work out of it...

[@kpdvw]

nice instruction but tell me how to test driver side airbag circuit 1 and 2 high resistance?

[@rigobertolopezsueiras1876]

Thanks, great help. Just fixed mine.

[@bookiefpv]

After replacing mine with 2 new different clocks springs, I still have the Air bag lights on. Any suggestions?

[@RusHnRelaX]

Hey there so I can not find anything about a 07 kia Sportage when it comes to this removal of the steering wheel is it the same steps basically as what your doing and or do I need a steering wheel puller tool or can they all just be wobbled off thanks in advance for any information/help given I really appreciate it

[@SanOro69]

Big Help Dude Kia Charges to Much

[@matthewknight1999]

Costs almost $100 for that part but worth it if it saves you another $200+ to take it in.

[@ithomasi757]

I replaced spring, everything worked well, then I parked my car, checked again and audio controls didn't work, only speed control button....any clue??

[@uscoob1]

What is the part # for the clock spring and where did you order it?

[@joasbonapartedossantos1026]

Great. Very Nice explanation.

[@TheTheamaj]

Thank you for sharing such a detailed video! Much appreciated :0)

[@sidawon]

let me know the size of hexagonal wrench that used in the first to unscrew.....I tried to unscrew it, but failed, it is too hard, it won't turn at all. Had been tighten to much.

[@ChrischrosBelgium]

Did it on my 2010 kia sorento ans cruise control works again!!

[@taheshalamesha]

Would the clock spring needing to be replaced cause the steering wheel remote control to not work?

[@DULLAHGOSOHARD]

Yes that can cause it to not work

[@richardmendoza4970]

Whats the part number for the clock spring? Im seeing 2 different sets 1u325fff o 2p170?

[@ricardoweis342]

Very clear, thanks dude a lot 👍🏻

[@davesandness]

Nice video. Well-explained. I didn't see you re-connect the horn wire?

[@DULLAHGOSOHARD]

I did thanks for watching

[@bernardhamilton1741]

Greetings Momoboss5, Great presentation on the ClockSpring Install! Does the operation you performed work for the 2014 KIA Sorento!

[@DULLAHGOSOHARD]

Yes

[@joelrayo1850]

I have a KIA Sorento 2013 but the make is the same wtih your 2015, does the part number for the clock spring follow the same? If not, would you know the right part number for me?

[@TheOnlyKosis]

Will it work on a 2011 Kia Sorento?

[@arpruss]

Question: When you put back the nut holding the steering wheel, how much tension do you put on it? Just as much as you can do by hand with a socket wrench? Or less? Or more?

[@DULLAHGOSOHARD]

No not just by hand you have torque it to spec

[@rogeliomartinez7279]

I recommend you to mark before you remove the nut. From stud to nut and also the steering wheel to the stud once you remobe nut so you get good alignment

[@spock33]

Great job

[@zx9green791]

Great video! Thank you!

[@bblod4896]

Good job.

[@32Dollarman]

What drill was that?

[@kc87507]

This is now covered by KIA -- even if your warranty is expired. KIA extended the warranty service on this particular issue.

[@delilahmurray9724]

I just called because mine is acting up. The dealer near me said they are charging me $160 to diagnose the air bag light even though I have the extended warranty letter from Kia saying I won’t be charged

[@ronspangler9620]

This is incredibly useful, thank you. Can you clear up the uncertainty on the TORX size? Is it 30? 40? Other? Thanks!

[@thezombino6119]

I used a T30 and it came out perfectly

[@bookiefpv]

T40 is the correct one

[@lascosasdelmundo6817]

Thank u great video

[@abdihassan1650]

where do you buy the clock spring amazon or from kia dealer ? thank you

[@alexm2186]

There is any risk if i fix myself? I do not have any experience but the mechanic ask for $650. Kia Sorento 2012 V6

[@tsgibson91]

Great video.

[@nathanarmstrong6630]

👍🏻

[@abdelkhaleqqady7754]

Very good.

[@thomastownsend8510]

I watched this video at least 10 times and am still stuck i don't see the pins to release the air bag and i can't get my torx bit to go in any help would be greatly appreciated

[@DULLAHGOSOHARD]

There is no getting around the torx bit you havr to used that to remove the air bag

[@lascosasdelmundo6817]

Number of part? Clock spring

[@stellabella5269]

🤗❤👍 XOXOX

[@aidasowcb9381]

41