#Kobalt

[@1dandy49]

Instruction manuals are extremely vague. Your video shows how simple restringing is. Thanks for taking the time to show us how.

[@meanderingyogi6562]

My pleasure Daniel, thanks for watching and taking time to comment..!

[@jayashkumar5941]

For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. kzbin.infoUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.

[@meanderingyogi6562]

I’ll say, I’ve had 5yrs of trouble free service out of mine so far ..! Thanks for watching..!

[@t.m.beavens-victoriabeaven9685]

PERFECT for those with little hand strength- thank you! Just want to say big thank you for putting this up! I'm a divorce single mom of 2 who takes care of my own yard. Purchased the string trimmer a while ago and this was incredibly helpful in my being able to restring my Kobalt trimmer. It's an "Easy Wind" but I don't have the hand strength to turn the knob counter clockwise. It is so much more simple for me to use your method- done in seconds and hands aren't torn apart! Thank you!

[@meanderingyogi6562]

What a wonderful response, thank you for sharing, truly warms my heart.. be safe, enjoy and thanks for watching..!

[@grady9752]

Our son is a new homeowner. He took delivery of his new zero turn mower yesterday and he asked me what I thought he should get for a trimmer. I have been using the 24V Kobalt for over a year and it's great. Light weight, powerful and honestly, as this gentleman illustrates, pretty simple to reload. I have other Kobalt hand tools also so there are enough batteries and chargers around the place to keep everything in freshly charged batteries. I have a big Stihl Combi unit also but now defer to this machine . It just works great!

[@SuzanAguilar-io7kb]

I was struggling to open the weed eater to replace the string. I watched a couple of videos but your video was the clearest. Thank you for the information!

[@meanderingyogi6562]

Absolutely, thank you for your feedback..! And thanks for watching..!

[@-OBELUS-]

Thank you. The instruction manual wasn't very helpful. I finally figured it out but your instructions gave me confidence that I had it right.

[@meanderingyogi6562]

Most excellent, glad I could help.. thanks for watching..!

[@qwertshadow]

finally a video on the Kobalt hub that I can work with ! Thanks so much !

[@meanderingyogi6562]

Lol, thanks Ken, and thanks for watching..!

[@aprilkackley011]

Weed eater string replacement for dummies! I love this video makes it soo easy . I went out and immediately replaced ours with no problem except for pushing the buttons on the side bc of arthritis but wonderfully easy after that. Thank you soo much. Usually have to wait for my husband to get around to doin it. Glad I can do it myself now.

[@meanderingyogi6562]

I really enjoyed your response. My wife read it and she’s dancing with joy at your empowerment. She doesn’t like to wait on me to do things either. So glad to assist, thanks for watching, PS, She’s the one who told me to make the video…! Shhhh

[@lotsabirds]

I just went back to this video to restring my thing again! Its the same video that i found you guys(lol) on to begin with! You guys are the gift that keeps on giving! Thanks again, my friend! This is may 19, 2023! I hope that when you see this that all is well up there!

[@meanderingyogi6562]

All couldn’t be better boss, gotta tell ya.. it tickled me to see your comment on this video.. glad you got to come back for a second helping..! I think it’s the most popular video I have out there.. take care good sir, appreciate you …!

[@lotsabirds]

@@meanderingyogi6562 My life is being enhanced by your presence and I truly appreciate your being in it! Thanks Again!

[@sallyandaya4724]

This is the 4 th instructional video I watched for the 40 v kobalt edger and you did a good job for a clear and simple instruction . Thank you so much .

[@meanderingyogi6562]

Good to hear, thanks for watching..!

[@2mypreciousful]

Thank you so much for putting up this video. It really helped me to string my kobalt weed eater. I'm a single woman that loves talking care of my yard. I was trying for a couple of hours to string it, then i found your video what a difference you made for me to string my weed eater. Your awesome, Thank you so very much. 😊

[@meanderingyogi6562]

Excellent, thanks for watching and the wonderful comment. Happy lawn caring..!

[@rollotomassi6374]

Thank you so much…..someone gave me a kobalt trimmer and this gentleman helped me tremendously…..!!!!

[@meanderingyogi6562]

My pleasure,thanks for watching..!

[@billpatterson3465]

Thank you!! You are a wizard! I've been fighting this stupid trimmer line for years over multiple videos and yours is the only one that made sense (and worked) for me.

[@meanderingyogi6562]

Excellent, your comment made my day.. Thanks for watching..!!

[@janetbrown3349]

Update 8/15/2021: Yes, this works like a charm and the Ugly Line cuts my weeds better than the regular string that came with the Kobalt. Don't hesitate to try this. I'm delighted! 8-) Thank you sir! You have made this so easy for me. I was about to go buy the expensive one already loaded but now I am going to get some Ugly Line and give this a try. I'm actually chuckling to myself because I now know so much more about my trimmer than I did before and I know that I can do this myself thanks to your tutorial. You are the best!

[@meanderingyogi6562]

Oh, thank you Janet for your kind feedback, so glad to help. Wishing you all the best, be safe & enjoy! Thanks for watching..

[@stanleymelvin4153]

Thanks I have been stringing my Kobalt the long way for two years!

[@bevyh1]

Very nice video. Just because I am an old woman I'm still one of the guys. I say hey guys on my videos. That covers everyone. Thanks so much. Excellent job showing exactly what to do.

[@meanderingyogi6562]

Hey guy, thanks for the kind words..lol. Really appreciate you watching and leaving a comment..! Glad I could help..

[@lotsabirds]

Thank you! Some videos on this subject seem to leave some critical point out. Your step by step was perfect. I couldn't restring it right until I watched this one. I hit like and I subscribed! Thanks again!

[@meanderingyogi6562]

Thanks Bill, so glad it was a help. And a huge thanks for liking & subscribing..!

[@lotsabirds]

@@meanderingyogi6562 Credit where credit is due! You did a great job! I'm looking forward to going through your other videos!

[@fancynancysblingbling7965]

Thanks for sharing your stringing tips. Widows need a little help at times and not fast talkers.. Thanks again!

[@meanderingyogi6562]

lol, glad to help.. thanks for watching..!

[@ellenrankin8120]

I am the resident weed eater, Thank you for the video, that was much less complicated than I thought it would be,

[@meanderingyogi6562]

Hi Ellen, so glad I could help, happy weed eating & thanks for watching..!

[@yvonettebrown8102]

Hello Great Video!!! I am a woman and I was not offended at all by the word "guys" LOL LOL You are a great teacher thanks so much!!

[@meanderingyogi6562]

Awe, thanks Yvonette, I appreciate your kind words, and thanks for watching..!

[@sabine3769]

The best video ever from Missouri

[@meanderingyogi6562]

Awe, thank you Sabine from Missouri, and thanks for watching..!

[@justinlane9371]

Thank you! It’s amazing how something so simple can be so frustrating.

[@meanderingyogi6562]

My pleasure, glad to assist. Thanks for watching!

[@billpledger7673]

Man I triied searching the internet for how to load line into a corded Kobalt trimmer and came up with squat! Until I found you! THANKS!

[@meanderingyogi6562]

Thanks Bill, glad to help…and thanks for watching..!

[@donnaenglestad4351]

Thank you so much! I have watched other video's on this and yours is the best! I was able to string mine the first time.

[@meanderingyogi6562]

You're most welcome Donna, thank you for watching and the wonderful feedback, enjoy..

[@NormLegge]

Thanks for the measurement tip - have not found anyone else even estimating. Great job

[@meanderingyogi6562]

Thank you, I have put up to 19’ on before, I couldn’t tell you how well the bump feed would work though. As I mentioned in the video, I just pull mine out by hand. Best wishes to you,and thanks for watching..

[@marlenethomas8180]

I appreciate your simplicity in explaining. It made it very easy for me. And kudos to your wife!! I’m a GIRL!!! Thank you so much. Hitting that like button!

[@meanderingyogi6562]

Thank you Marlene, I certainly appreciate the wonderful feedback and so glad I could help.. I will pass on the kudos, she will enjoy that. Have a safe and wonderful weekend, and thanks for watching !

[@tammiecarbohn6796]

Thanks for including us girls that are watching your video. 💜

[@meanderingyogi6562]

So very welcome..! Thanks for watching..!

[@richardcabullos4602]

Thanks. You made that look so easy. I was about to go get that self loading one. Glad I saw this.

[@meanderingyogi6562]

Hey Richard, I appreciate you taking the time to reply. So glad I could help, and I love the pooch pic.. adorable !

[@saxmanjwill]

Thanks so much for uploading this. You fixed the frustration and made it very easy to understand.

[@meanderingyogi6562]

Excellent news, thanks for watching and leaving a kind message..

[@rungavagairun]

I bought one of these used from a local guy. He thought the separation between the blue button and the spool was a crack and that the spool was broken. I got a deal because of it. The trimmer was fine. He had the wrong size string in it (smaller diameter than recommended), but I think it will work. This was helpful. It's not very difficult.

[@rungavagairun]

I wish I would have made the switch to battery tools years ago. Gas is a hassle and the smell gives me a headache.

[@meanderingyogi6562]

Perfect, if it doesn’t work out I think the new spools are fairly priced & you would have the option of upgrading as well, totally agree on the gas smell, loved it when I was young. Now I too get headaches from it..

[@darellpiper7227]

Thanks for the nice video, I bought a new Kobalt 24 volt trimmer and this is exactly the same way to replace my string.

[@meanderingyogi6562]

Perfect, and good to know.. Thanks for watching..!!

[@EDROMAXIMUS]

aaah, best description yet, thank you!

[@meanderingyogi6562]

Your most welcome Ed, thanks for watching..!

[@cordyloya2758]

Thank You this really help me alot. I was really frustrated trying to load the string. Just to let you know I am a girl so very helpful.

[@meanderingyogi6562]

Your very welcome Cordy, glad to help eliminate that frustration.. Wishing you all the best and thanks for watching…!

[@allee1028]

Great video really helped me understand the how too, being I haven't had one of these before. Really like your presentation in all your videos 😊😊

[@meanderingyogi6562]

Thank you for your reply and kind words, glad it helped. Thanks for watching..!

[@johnhart2861]

Nice to the point instructional with tips to prolong the trimmer life

[@meanderingyogi6562]

Thank for watching John, and I appreciate your kind Review

[@andyd.1793]

Great stuff. I have that model and use it several hours a week. I will definitely use that trick of pressing down the bumper and manually pulling the string out. Thanks for posting, namaste✌🌟

[@eliddell38]

My first try and this was an awesome help! Thanks for the instructions!

[@meanderingyogi6562]

Most excellent, thanks for watching..!

[@amberly221]

Thank you for sharing. This Lady now knows how to wind her weed eater!

[@meanderingyogi6562]

That made my day Amberly, appreciate you sharing and thanks for watching..!

[@jennabenningfield5583]

Thank you for this. I was about to trash mine because I’ve been so daggone frustrated with my trimmer. I’m gonna give this a go!

[@meanderingyogi6562]

Sorry to hear about your aggravation Jenna, I’m certain if you take your time and do it a couple times you’ll find it’s not so bad. If you have any more issues or questions I’m happy to try and help some more! Thanks for watching and taking the time to comment ..

[@AntLive29]

good video. really helps us men take care of the yards!

[@meanderingyogi6562]

Right.. lol.. thanks for watching..!

[@brianchesser576]

Thanks for shareing I wouldve just wound it around i had no clue it should have two ends sticking out

[@meanderingyogi6562]

Lol, your welcome, thanks for watching..!

[@sabine3769]

My line doesn't come out when it gets short after trimming. What my problem? You answered it for me. The Best instructions. Thank you

[@meanderingyogi6562]

That's awesome, your very welcome. And again thank you for watching..!

[@cathyhennessy8838]

This is very helpful! Thank you for sharing!

[@meanderingyogi6562]

My pleasure Cathy, thanks for watching..!

[@krishonnamonet]

Thank you so much! Just bought this and needed help reloading

[@meanderingyogi6562]

Glad I could help, thank you for watching.. Wishing you all the best!

[@Howard2006]

Great video - One problem I have with a similar model KOBALT 40V is that in re--stringing the string overlap and the feed string gets stuck during use. I have to open it up and fix it. Other than that , it is a great tool. No electric line and no gas engine to screw up!.

[@meanderingyogi6562]

You might try a different style string if you haven’t already, and sometimes if you put less string in to start it helps. When you run against a post or chain link fence the string will wrap and pull tightly till it snaps meanwhile pulling the inner string together. When it just wares out from grass and other plants it shouldn’t do that often. Thanks for watching..!

[@Howard2006]

@@meanderingyogi6562 what has happened a couple of times is that I find the string unable to pull out and I have to restring .

[@meanderingyogi6562]

Gotcha.. still might want to try a different string on the next go around.. just for giggles..

[@josehmoreno7685]

Thanks I just bought my 4 kobalt 40v garden tool and it's really 👌👍

[@meanderingyogi6562]

Excellent, thanks for watching. I hope you receive the same level of quality & performance I’ve had with mine, enjoy!

[@aleydasosa1134]

OH MY GOODNESS !!! THANK SO SO MUCH.. YOU MAKE MY DAY 🤗🤗 🙏🙏 FRON TEXAS.

[@meanderingyogi6562]

Your absolutely welcome, the feeling’s mutual. These comments make mine. Thanks for watching..!

[@kimberlyk.207]

Excellent thank you! Now to try to find a video on how to change it to blade

[@meanderingyogi6562]

If I knew a good one I would tell you, I haven't tried a blade on it, only string.. Thanks for watching..!

[@kimberlyk.207]

Thanks for replying.. I didn't expect that. Ive now subscribed to you.. Love how you teach and present. People tease me about being a KZbin Mechanic, because I work I work on my 2000 Ranger. Until the job is too big! Lol So..My brother in law..in WI.. (I'm in KY) .showed me how to use a blade on a Stihl. ..but I didn't watch him put it on. It helped save string with so many saplings. I was working in country few weeks ago,, husband came back with this 40v Kobalt he bought. I love Kobalt everything! I was amazed how easy to use. I told our daughter in PA about it, now she's getting one. Thanks to you, I can show her how to easily change the string when I go up there in June. I'll check out your your other uploads. Love your laid back way! Thanks again! Kim in KY

[@meanderingyogi6562]

Wow, thank you Kim. KZbin & Goggle with a hint of common sense, can turn you into a Mechanic and me into a Baker..lol, my latest venture...baking homemade bread.. Thanks for the kind words and subscribing..!

[@CurtisForrester]

I know how to change it - and I have. It's still a pain to chain. You give some good tips, especially on the line to use. Tnx

[@meanderingyogi6562]

Most welcome Curtis, thanks for watching..!

[@EyezSpeakTruth]

Your video really save me some money because ive been looking for a replacement ready to go spool and was on was fence on whether I should buy another one😔Thanks for the step by step instructions. Easy Peasy😉

[@meanderingyogi6562]

Excellent Papi, so glad it helped. Love hearing these kind of comments. Thanks for watching & sharing your experience with me..!

[@bartenz4307]

Yep, a Yogi calm and clear .

[@meanderingyogi6562]

Thanks for the kind response Bart, and thanks so much for watching !

[@QuarterZipBro]

Bro makes it look so easy.

[@meanderingyogi6562]

Lol, thanks for watching..!!

[@paigefranklin9785]

Awesome! You have saved me today. Had I known as a 56 yo woman that I would need to know this I would have called you a liar!

[@meanderingyogi6562]

Lol, adorable Paige. Glad I could help..! Thanks for watching..!

[@rocabilly5560]

Thank you 🙏. I used the string you recommended & very satisfied.

[@meanderingyogi6562]

You’re very welcome, yeah I like that ugly line.. pretty good stuff ! Thanks for watching 🙏🏽..

[@marlaworley6524]

Thank you, sir!! I love how easy you made this to follow and how easy going you are. I’ve been testing to figure out how to load mine for months now and I wondered about hitting the ground so I appreciate that tip! Also, thanks for adding “girls” each time you caught yourself saying guys!! I’ve been trying to be more inclusive in my language as well, but it can be hard to break old habits!

[@meanderingyogi6562]

Agreed, I aced the big ones, but the old little habits are the tough ones, lol. Thanks for the kind words and watching..

[@Nellenton1]

Great video! Thanks for the help!

[@meanderingyogi6562]

Absolutely. Glad you enjoyed it, thanks for watching..!

[@jamesbalius3289]

Thanks man mad that simple as can be loves homie

[@meanderingyogi6562]

Lol, thanks for watching James..!

[@sp00f34]

best vid on the subject

[@meanderingyogi6562]

Thank you, and thanks for watching..!!

[@rondriggers2755]

Great demo. Thanks very much

[@meanderingyogi6562]

My pleasure Ron, thanks for watching..!

[@jantonio55]

Thanks so much, this worked great for me. :)

[@meanderingyogi6562]

Absolutely welcome, thanks for watching..!

[@johnnyball2347]

Thanks! You really made it simple.

[@meanderingyogi6562]

Thanks Johnny! So glad to hear, literally thank you for watching and letting me know by commenting.. Best wishes!

[@buildingjmpr67]

Very cool channel bud👍👍 lots of info👌👌

[@meanderingyogi6562]

Thank ya-thank ya, and thanks for watching..!

[@udaitaxem7505]

Thanks man I did it how my grandad taught me and he didn’t have a clue of what he was doing 😂

[@meanderingyogi6562]

Your very welcome, glad to help, and now maybe you can show him an easier way.. thanks for watching..!

[@JHRICHA3D]

GOOD VIDEO. TWO TIPS. WHEN LOOPING AND CRIMPING THE LINE, WHERE YOU START AT THE TWO ENDS, MAKE ONE END EITHER SHORTER OR LONGER THAN THE OTHER. THEN DO AS NORMAL WITH THE LOOP. BOTH SIDES SHOULD COME OUT EVEN. THE OTHER IS DO NOT BUMP THE LINE HOLDER ON THE CEMENT. DO IT ON THE GRASS AND IT WILL LAST LONGER. ONCE AGAIN, GOOD VIDEO.

[@meanderingyogi6562]

Thanks for the tips, especially on the line length good one. I knew about the bumping on concrete.. appreciate you watching and taking a minute to leave a comment..!

[@PersonalFitness3]

Excellent review! 😎👍👍👍

[@meanderingyogi6562]

Thank you good sir, and thanks for watching..!

[@paulpowell5901]

Appreciate it,thinking bout getting one👍🏻👊

[@meanderingyogi6562]

I've been running mine hard for four yrs and haven't had the first ounce of trouble.. Thanks for watching..!

[@stevebuchanan3212]

Nice video. Would you happen to know how/if you can remove the bottom spool housing so you can install a newer style string head feeder?

[@meanderingyogi6562]

I've not tried to change the head, but I'm almost certain you can put different ones on it. Thanks for watching Steve..!

[@joebuttas26]

Perfect. Thank you very much.

[@meanderingyogi6562]

Absolutely JoJo, thanks for watching..!

[@aiguowu1298]

Thank you Sir. It is helpful

[@meanderingyogi6562]

Thanks for Watching..!

[@FadedScarsIN]

Nice Avalanche! I have a black 02

[@meanderingyogi6562]

Thanks Matt, the wife bought that for herself for a retirement gift new in 07. Just turned 100k it's been well taken care of and spent the majority of its life in Florida. Thanks for watching !

[@faridnadem7799]

Thanks for the help👍

[@meanderingyogi6562]

Absolutely Farid, thanks for watching..!

[@SonjaGaither]

very helpful! thanks

[@meanderingyogi6562]

Very welcome, thanks for watching..!

[@arthurwilliams3165]

I’ve discovered with my kobalt 40v self propelled mower , a 4ah lasts 10 minutes tops, needs 6ah

[@meanderingyogi6562]

I’ve only used the 2.5 that came with the weed eater, and the 5.0 from the mower. My 2.5 would last 20 minutes at least. Sounds like the 4.0 is weak for some reason. I replaced a 5.0 with a 6.0 and wow it does make a difference. Thanks for watching..

[@jp2861]

Thanks! Very helpful

[@meanderingyogi6562]

My pleasure, thanks for watching..

[@IAMPOSITIVE711]

Excellent!

[@meanderingyogi6562]

Thanks, and thanks for watching..!

[@angiwangi]

you’re amazing thank u

[@meanderingyogi6562]

Glad to help Angela, thanks for watching..!

[@wayned3122]

Great vid, thanks for the tips. Gotta go weed wack now!

[@meanderingyogi6562]

Most welcome Wayne, thanks, and thanks for watching..!

[@susandemarest1676]

Thank you, thank you thank you!!!

[@meanderingyogi6562]

Welcome, welcome, welcome... And thank you for watching..!

[@DaveSteimel]

I have to figure something out with my (recently purchased used) trimmer. That center blue ‘button’ is permanently pushed. So it doesn’t feed the string out. I wish I knew that before I bought it.

[@ralphiejacuzzi]

Seriously, thank you sir 💖

[@meanderingyogi6562]

Your very welcome, and thank you for watching & taking a moment to comment !

[@BFbigfoot]

This looks like a newer model trimmer than the older model one that I have. Are you able to load just 1 string and cut with it? I found that makes the battery last longer. With the older model you can load the two strings separately; hence, giving me the option to load and cut with just 1.

[@meanderingyogi6562]

Never tried that, I think just running one string would work that lower bearing a bit too hard. Like running an unbalanced washing machine. All the best, and thanks for watching..

[@jamesfields1533]

Great info

[@meanderingyogi6562]

Thanks for watching..!

[@X19-x5f]

Thanks man!

[@meanderingyogi6562]

Glad to help Charles, thanks for watching..!

[@gardenhill6502]

I have a good supply of the next size up string left from my old gas string trimer. Could I possibly use it so as not to let it go to waste?

[@meanderingyogi6562]

Sometimes you can move to another size up, depending on the type of string. If it fits through the hole it’ll work, it won’t hold as much, and the bump string may get stuck.. best of luck and thanks for watching..!

[@tonyslawncare]

Your shout out video is up!

[@meanderingyogi6562]

Thanks Tony.. That's a first, I appreciate it..!

[@linettamcsparen1329]

Very helpful

[@meanderingyogi6562]

Excellent, thanks for watching Linetta...!

[@kevincollins5599]

Much appreciated. We'll made content.

[@meanderingyogi6562]

Thank you Kevin, I appreciate your taking time to watch and comment!

[@ewewell]

Once you have the line wound up and you are putting it in the weed eater do you pull the line out of the little notches before you push the top fully on?

[@meanderingyogi6562]

Yes 👍

[@ewewell]

@@meanderingyogi6562 thank you

[@meanderingyogi6562]

Absolutely, thank you for watching..!

[@unclegeorge7845]

Is there a way to convert these to a standard manual feed string hub?

[@meanderingyogi6562]

I'm not certain, but I think someone does make a conversion head replacement..

[@jamesmcgarity614]

Can you use a bigger line than? 080

[@meanderingyogi6562]

I believe you can go one size up, I’ve not tried it though. As long as it’s loose enough through the feed slots it’ll work, but you’ll have a less line fit in the hub. Best of luck, and thanks for watching..

[@miguelioism]

How long take the battery

[@frankcastle6745]

Thank you, sir

[@meanderingyogi6562]

Most welcome sir, thanks for watching..!

[@donnawash]

Thank you!!

[@meanderingyogi6562]

You're very welcome, thanks for watching..!

[@BlindMansRevenge2002]

I just can’t figure it out! unfortunately my eyes don’t work so I can’t see exactly what you’re doing. You gave a very good audio description but, without being able to match up what you’re talking about to what I’m feeling on the end of mine I am lost in the sauce. Thanks anyway, I hit the like button just because I will have to save this video for my wife to look at

[@meanderingyogi6562]

Hopefully the wife can fill in the gaps, can't thank you enough for the comment and certainly appreciate you watching..!

[@elizabethcoleman827]

PEACE BROTHER, GOOD JOB. WHAT MODEL OR YEAR IS THAT? I HAVE A WHOLE OTHER MACHINE. I HAVE ALL BLACK DEVICE, AND MY SILVER LARGE SLOTS ARE ON THE MACHINE ON BIG BOTTOM.

[@meanderingyogi6562]

I bought them new in 2018..thanks for watching..!

[@stamac4335]

What if your lid gets stuck how can you get it off?

[@meanderingyogi6562]

Put it upside down on the ground, hold it in place with a knee or foot , whatever's comfortable. depress the two buttons. While holding the buttons down, wiggle and pull. Now with your other free hand lightly tap on the cap with a hammer while pulling and wiggling the cap. This should brake it free without damaging it .. Best of luck..! Thanks for watching..!

[@ONETRICKPONY-w7c]

Thank you- the kobalt- has no clear instructions I may have figured it out- but it’s always a sheeet show- every time, for me

[@meanderingyogi6562]

lol, glad to help.. Thanks for watching..!

[@devinjohnson7038]

Thank you

[@meanderingyogi6562]

Thank you for watching..!

[@michaleneboyle9418]

Is it the same for 24v

[@meanderingyogi6562]

I haven’t done one personally, but the concept is very similar on most all non commercial brands.