looking forward to this series, alot of similarities with the older kubota i just purchased. Keep up the good work!
@Blindboy868 жыл бұрын
Loving all your vids on both channels mate. Really looking forward to seeing this progress
@northcarolinafarmingrestor72058 жыл бұрын
I'm not a kubota person but I like that kubota
@felixrossiter85818 жыл бұрын
Kubota tractors are so cute and good for little jobs
@c0c0asauce7 жыл бұрын
If you want lights one easy way is to mount some sturdy mirrors, then mount small led bars on those.
@MrMcGill20108 жыл бұрын
We have one of these at work, sort of a half cab on it. No doors or rear windows. Really good machine. Mainly used for scarifying and pulling a small trailer. Also has a cutting deck mounted to under side. Council owned as well.
@Majestic-Gaming4 жыл бұрын
These are the kind of videos I like
@sanderpoortvliet26888 жыл бұрын
A tip for the light bar you want to put on the roof: you can use rubber rings on both sides of the plastic it wont leak becous if one rubber goes there is always one left to protect your cab.PS the rubber ring helps the bolt from not scratching your fresh paintwork;)
@Mr.M1STER7 жыл бұрын
Nice little 3 cylinder diesel engine.
@Rdrake14138 жыл бұрын
Auxbeams across the top would look really good
@TommoB1238 жыл бұрын
do you have a GoPro head strap? that would make your job a lot easier i think
@theofarrer24978 жыл бұрын
He gave it a good wash
@killianoneill25418 жыл бұрын
machinery restorer your toles are cool
@stianmland55138 жыл бұрын
You should get a exhaustpipe in chrome with a floppet on the top;)
@stianmland55138 жыл бұрын
Flapper*
@RuzzP7 жыл бұрын
floppet almost sounds more professional, lol
@stianmland55137 жыл бұрын
Ruzz P Or fapper😉
@eoghanmurphy95587 жыл бұрын
Massey Ferguson FiatagriNH he should get a straight pipe
@churchparkfarm31788 жыл бұрын
What you need is a strong detergent I had a fairly basic washer and the detergent made it, any decent oil removing detergent will do
@mikeleveller52138 жыл бұрын
Great stuff, another tractor restoration video, will look forward to following this. I hope you put the front hydraulic arm back on and get a snow plough for it, we're bound to get heavy snow as we are overdue. Then we can have some snow ploughing videos, great fun, perfect for snow ploughing with the cab and heating. I'd love a machine like that. Good luck with it ;)
@farmingfan39078 жыл бұрын
Ya need a go pro head strap and I was carting potatoes in my Hayter 13/30 today and my raving auxbeam lights on the back
@frederikspannerolesen95148 жыл бұрын
You should get some Matts for it so you could set your shoes would look nice
@patrykbiaek95967 жыл бұрын
cool tractor
@bunnywarren8 жыл бұрын
This looks like being a fascinating set of videos and I look forward to these coming up. I've heard good things about Grip-Tite socket sets. They grip on the flat parts of the nut so you can get a grip on them even if the bolt is rounded off.
@MachineryRestorer8 жыл бұрын
I have heard of those, I think it might be worth investing in some!
@donalts100a58 жыл бұрын
+Machinery Restorer r u keeping the Kubota
@titanghost45308 жыл бұрын
yes😂
@agrifo11258 жыл бұрын
Replace the front hydraulic ram with 3 point links
@t0mall8708 жыл бұрын
What are you going to do with the tractor when it is fully restored????
@thegamerexpress59528 жыл бұрын
Love This compact tractor
@adampyro8348 жыл бұрын
I once had a similar prob on an airline hose, the collar was corroded and dirty. So I gave it a few blasts with a can of brake cleaner and i think a bit of penetrating oil too and i managed to work it loose... water pump pliers might help you get a good grip on it but i don't know what risk of crushing it would be. not sure if that helps but thought id mention it
@tommaliy43938 жыл бұрын
Hi machinery restorer when we have ceased bolts we use some think called spray grees and it stops corrosion
@senankeane8 жыл бұрын
get some auxbeem lights for the cab
@BIGLAMBO012345 жыл бұрын
Senan Keane auxbeam
@thejakecaldwell8 жыл бұрын
Great vid i like the massy better though:)
@aldenscharback77417 жыл бұрын
If you can't get the bolts to come out try using a strong arm with a long snipe on it that will either loosen the bolt or break it depending on how hard you push/pull on it
@TommoB1238 жыл бұрын
What a quick month that has been lol
@MachineryRestorer8 жыл бұрын
Haha yeah
@pierrearaby91208 жыл бұрын
This is going to be a fun restoration to follow :-)
@curtisconnolly13867 жыл бұрын
Hi daggerwin it's Curtis that is one nice Kubota tractor and it looks very nice but it does need a lot of work doing to it but once all the work as been done it should like brand new again don't you think
@MachineryRestorer7 жыл бұрын
Hopefully :)
@jlcustard54628 жыл бұрын
Going to be a great series
@kymhingston38858 жыл бұрын
Put a beckon on it daggerwin.lol
@zetor95788 жыл бұрын
To get the couplings off the back pull back the collar and pump the valve the pressure should make it pop right out
@MachineryRestorer8 жыл бұрын
Tried and failed...thanks for the tip though. It has rust welded together
@shanebrown59998 жыл бұрын
Machinery Restorer use a rivit for the bullbar LEDS
@dhm_42057 жыл бұрын
JD and Kabota are very popular in New Ingland America
@alfiemcleod45618 жыл бұрын
Hey dagger nice vid good to see the old tractor! See the old logo sticker on the bonnet! Did the leaflet say ravenhill or did they get it from somewhere different? Where did you get it from sorry it's a lot of questions but it's cool you have my councils old tractor "the malt whisky country's!" old Kubota down beside you! And there's nothing wrong with the K2 that's what I have! 👍🏼
@finleysrandomvlogs82518 жыл бұрын
same nothing wrong with pressure washer
@eoinoreillyagrivideos54358 жыл бұрын
turbo+straight pipe on er😉
@bard443 жыл бұрын
What would be the cost of a total rebuild of this 2100? Including mechanical and all decals, including also all parts rusted with new? Would like a new machine, but the cost is prohibitive for me at this time.
@farmingsimulatorplayer29877 жыл бұрын
I have a presherwasher just like that
@shanebrown59998 жыл бұрын
Use a rivit for front bullbar leds
@sonomaeric58728 жыл бұрын
Is KZbin your full time career between this and farm sim? Or are you like a mechanic or something. You seem so knowledgeable about restoring these smaller tractors and implements not to be.
@MachineryRestorer8 жыл бұрын
Thank you for saying so :) I do have qualifications in Engineering so that is why I know a fair bit about them :)
@Wayoutthere8 жыл бұрын
AH, sturdy Kubs. :)
@robertmasarik44238 жыл бұрын
Disconnecting the hydraulic coupler. You maybe fighting hydraulic pressure. Try cracking open the line.
@Trimbleedits8 жыл бұрын
Great video daggerwin! 😉
@brookerbilly89388 жыл бұрын
if you do drill in the roof continually cool the drill bit with water
@alexblacksmith56058 жыл бұрын
Naa no need it won't melt.
@Gamerboy-mr8fz6 жыл бұрын
When you drill into metal cool the drill bit with oil
@matthewmccurdy79738 жыл бұрын
use silicone to put a metal plate on the roof
@Rab938 жыл бұрын
give your stuck hydraulic fitting a good belt with a big hammer since the release collar is back by the looks of it
@awsomcheeldy86178 жыл бұрын
+machineryrestorer looks like it could need a lot of work! I wish you luck. Are you going to sell it?
@jamesfinnegan29008 жыл бұрын
Are you going to change the cab light to LED and put a light beam on the cab
@bobvader20018 жыл бұрын
Just so you know, pretty sure the tow hitch that you drop the bar through is upside down
@MachineryRestorer8 жыл бұрын
Thanks I will take a look at it
@bobvader20018 жыл бұрын
Assuming it's the same as a B3150 xD It's okay being upside down if you're just towing but if you want to use the PTO you may have to flip it upside down. should be a pin holding it in
@walkden19768 жыл бұрын
may just but a new tractor on the list lol
@ronanhealy76518 жыл бұрын
dagger are u gonna keep this tractor cas its really cool or are u going to sell it on
@harryday53108 жыл бұрын
What is the size difference between this tractor and the countax lawn tractor? Great video by the way :)
@houstonwalker86058 жыл бұрын
Just wondering if you would ever do a give away, it would be interesting
@silage6920s8 жыл бұрын
Use silicon on the holes in the roof as a sealant?
@andyhornby1618 жыл бұрын
how long have you had your karcher k2 because most of the k2s are quite powerful
@jamiemallon30218 жыл бұрын
Dagger we were going to get a k2 compact but then we got a k4
@angus_m7 жыл бұрын
are you going to keep the cab?
@thomasvanhoof64778 жыл бұрын
why did you take of the snow plow linkage?
@Mr_D2_1004N3 жыл бұрын
Kubota starts up captions music. Me damn right
@eaperformance87078 жыл бұрын
ever thought about selling massey tractor of yours daggerwin
@DJGSonik7 жыл бұрын
isn´t there some rule that you´re not allowed to clean a motor in your yard? because of oil and stuff leaking into the ground?
@Caleb_FC6 жыл бұрын
ZeroG Coasters there’s a difference between pressure washing an engine and draining oil
@donalts100a58 жыл бұрын
the engine of it sounds exactly like a Me9000
@macketherington2508 жыл бұрын
Put on light bar
@timashman3818 жыл бұрын
How much did you pay for it? I really want one now
@xvp40virus3 жыл бұрын
Do they sell de greaser in brittan?
@boerbrabant8 жыл бұрын
Are you gonna do a vid when u take the cab off?
@MachineryRestorer8 жыл бұрын
Yes
@harryday53108 жыл бұрын
Machinery Restorer how big is this tractor compared to the countax ride on mower ?
@eoinoreillyagrivideos54358 жыл бұрын
what is she 21 hors and roun 25-6 at the shaft?
@spookyeel12328 жыл бұрын
Where do you get your compacts from
@kohnvict16246 жыл бұрын
im confused. is this dagg?
@theofarrer24978 жыл бұрын
Second
@connormadeley22296 жыл бұрын
Is this daggerwin
@zandrevonk33738 жыл бұрын
i still love the massey more tho
@MachineryRestorer8 жыл бұрын
*Psst...so do I*
@zandrevonk33738 жыл бұрын
lol
@titanghost45308 жыл бұрын
yes but the Kubota is still good
@titanghost45308 жыл бұрын
but yes the massey is the best!!
@zandrevonk33738 жыл бұрын
ye
@titanghost45308 жыл бұрын
how much did you get it for?
@ImnotDavid8 жыл бұрын
is there coming a back window back on it
@MachineryRestorer8 жыл бұрын
Should be :)
@ImnotDavid8 жыл бұрын
nice love your vidds on all the 2 channel of you Dagger love your farm sim vids
@matthewmccurdy79738 жыл бұрын
straight pipe it
@denisekennedy23688 жыл бұрын
are your to compacts the same horsepower
@MachineryRestorer8 жыл бұрын
The MF is 20hp and the Kubota is 21hp
@magnuskjsnes26028 жыл бұрын
can't you buy a little bit bigger tractor and restore it?
@thefarm75095 жыл бұрын
Daggerwins Landsacping
@DairyFarmer-uc8eq8 жыл бұрын
y at 1:08 is their a sanpellegrino tree 😂😂
@simsync80187 жыл бұрын
how do you learn all this
@w5picklevevo6884 жыл бұрын
Dude u need to pressure wash ur pressure washer
@laurisdemons8 жыл бұрын
jea mount gopro,and you dont hawe to be scared of showing your face.:)
@theofarrer24978 жыл бұрын
Haha
@thomasfoyle21248 жыл бұрын
if you're planning on selling that tractor when you have it restored I'd be happy to take it off your hands
@Gupham8 жыл бұрын
Face reveal? ;)
@dgautomotivefabrications58178 жыл бұрын
+machinery restorer. Please can you check out my Ferguson tef20 rebuild I also watch your other channel I can't wait for fs17 Keep the vids up. 😀😀