Lamb Chops Ride Hypermotard 1100 Engine build EP1

Well Lamb Chops and I are back to building his Hypermotard 1100 2V engine.
Two years in the waiting, in this episode we aim to progress as far as we can with the bottom end of the engine.
You can find LCR channel here: ‪@LambChopRides‬
During this video I will cover off the following tasks to assemble the bottom end:
Checking all the parts are here
Case check
Bearing removal and install
Setting Crank preload
Setting gearbox float
Setting Shift drum float
I hope you enjoy this first video in the engine rebuild, please like, share and subscribe for further content
#ducati #hypermotard1100 #engine

[@MrYamaDuc]

Great to see you back Nelly

[@DesmoWerx]

Thank you, going to try and get back in the swing with more regular content. 😎

[@momobrd1118]

Hi guys ! I'm rebuilding my hypermotard 1100 evo sp engine and thanks to you I know exactly in which direction I'm going I'm no longer afraid really a very very big help thank you very much! superb video (I'm French) and you are the only one to have made a video of a complete renovation

[@DesmoWerx]

Good luck if you need any help or advice I am here to answer questions. 😊

[@momobrd1118]

Where can I contact you?! 😊

[@DesmoWerx]

There is an email on my about/details page on the channel you can use 😊

[@zxgopher]

Awesome to see the channel back and running 👌🏼

[@DesmoWerx]

Appreciate it, more to come soon 👍🙂

[@RedDragonUncaged]

Hello ... the 'Tard lives? Great to see it's getting out of the boxes. Desmond service on my 1100S next week, just in time for the Spring. 😅 Crack on Chopsy

[@DesmoWerx]

Nice one

[@timec818]

❤love you videos 👍

[@DesmoWerx]

Thankyou 😎

[@kris4362]

Bloody hell Nellie 2yrs. Well done on the rebuild so far mate. (HOKITIKA, STH WESTLAND, NEW ZEALAND)👍👍👍👍👍👍👍👍👍😎

[@DesmoWerx]

Thanks, its a slow burner this project 🤣

[@desmoandrew1763]

good to see you back and spinning wrenches, so to speak. happy holidays to you mate!

[@DesmoWerx]

Good to be back, plenty of work to be filming and sharing 😎 Happy Holidays to you too.

[@briandarnell5966]

Nice to see you doing some work again lol 😂😂 keep up the good stuff

[@DesmoWerx]

Thanks! Will get some content up soon 👍🙂

[@robevans916]

For racing/track use do you recommend different crank or rod clearances than stated in the manual? I’d think looser if anything, but perhaps that’s incorrect.

[@DesmoWerx]

I dont mess around with the big end oil clearance, not worth it from a reliability point of view. However I personally run a little less preload on the main bearings for my race engine builds.

[@xyesman5519]

At last you are back😊

[@DesmoWerx]

Thanks, will try and get more content out for you all 👍🙂

[@adamroper1197]

You're a legend!! I was just rewatching some of your old videos. I received a pile of parts just two days ago for my Ducati 748 and am planning to undertake a build similar to your race bike. I've acquired the oil cooler, Ohlins suspension, a mono subframe, and some 5-spoke wheels. Additionally, I have a low-mileage 748 engine that I intend to install while I work on rebuilding the original motor of the 748. I have a question: do you happen to know what the 'E8' stamping on the heads means? If this new engine features a different cam compared to a standard 748, it might complicate things. I presume I'll need to invest in a power commander as well? Anyway, I wanted to express my gratitude for being such a huge inspiration for me to purchase my first Ducati and, more recently, my latest acquisition, an 851. I'm looking forward to embarking on this new build. and watching the build you're doing with Lamb Chops.

[@DesmoWerx]

Sounds like you have an interesting build ahead of you, glad my channel is of help to you 🙂 Not sure what the E8 stands for, I would imagine its just a standard head.

[@adamroper1197]

Cheers mate, I thought it was.@@DesmoWerx

[@Captain-Donut]

🙏❤️ Love from Scotland ❤️🙏

[@DesmoWerx]

Thanks 👍🙂

[@trevor1200]

Glad to see a new engine rebuilt series!

[@DesmoWerx]

Thanks Trevor, more coming soon 😊

[@flyingkippers2666]

Just wanted to say thanks for a great channel. I succesfully restored my Superlight with a great deal of help from your ST2 videos.

[@DesmoWerx]

Great to hear, that makes it worthwhile for me 👍😎

[@kenalford2538]

Nice to know you're well, back in the workshop and sharing, thanks!

[@DesmoWerx]

Thanks, more coming soon 👍🙂

[@365havenotime]

Nice welcome back!!

[@DesmoWerx]

Thanks 🙂