Actually it's a collection from the few smartest minds in the world throughout all human history until we got to computer assisted.
@flowersdhaka75097 ай бұрын
Glorious is my Creator who created human mind.
@Jason-o5s3 ай бұрын
Cheer~~~cut or carve (a text or design) on the surface of a hard object.😊
@johanvans462310 ай бұрын
Can you please make tutorial step by step, how to focus etc..
@johanvans462310 ай бұрын
Is it possible? You can send me a link because your channel is very big etc . And I'm new I will receive my laser engraver and cutter soon
@MarissaFloro3 ай бұрын
Omg it's so perfect. What laser are you using?
@LaserEverything3 ай бұрын
Laser details are in the description
@Ac-ye7zu2 ай бұрын
Is that a CO2 laser how do you engrave on steel?
@om.nom.candymadness1256 Жыл бұрын
How much does that laser cost?
@mrs.lasereverything6 ай бұрын
@@Taran-d.B.23 This isn't an Atomstack. it's a Mactron 30W JPT
@jinz04 ай бұрын
Thousands
@PrecisionCustoms3 жыл бұрын
Hi, I'm learning a lot from you my friend. Hey when you did the "clean it up" run, i'm confused how it makes the black marking into white like that. Can you explain what's happening please?
@LaserEverything3 жыл бұрын
Higher frequency (25 -> 45 khz) means less energy per pulse. Less energy gives a lighter look and does a better job pushing the carbon scoring out of the way leaving a nice clean finish!
@Glucotesting2 жыл бұрын
@@LaserEverything great that mean any fiber laser machine can clean the engraving?
@bla-o3h23 күн бұрын
Can u plz share tour param settings plz
@LaserEverything19 күн бұрын
Check out our website lasereverything.net
@TheGuyOutdoors1Ай бұрын
Light it up, mark it up, center it up, focus up, center it up, hatchet, light it up, clean it up.
@LaserEverythingАй бұрын
buy it use it break it fix it
@vereor786910 ай бұрын
if i needed to engrave something on both the front and back of a pendant what gauge of silver should i use for the pendant?
@haalii___Ай бұрын
Recently i watched ads for metal 👀 printed pendent but very expensive per pendent.i want to buy that lazer machine,which type of lazer print machine and cost?
@LaserEverythingАй бұрын
We have a buying guide with links to our equipment at our site lasereverything (dot) net
@Alansari39025 ай бұрын
Can I have your email? I have some questions about engraving, laser machines.
@LaserEverything5 ай бұрын
Join our Facebook or Discord!
@ahmedmasoud73792 жыл бұрын
Hi brother What is the machine name and brand?
@LaserEverything2 жыл бұрын
30w Mactron JPT, link in the description.
@maresheree1809 Жыл бұрын
Hello. I want to join your academy. The type of laser I have is a 60w JPT Mopa with 69 mm rotary axis. 110*110 mm lense with a working voltage of 110-120V and 50-60HZ. Will your Academy help me with settings etc? Thanks so much for your time. 😊
@LaserEverything Жыл бұрын
The LMA is mostly a means to support the existing content we upload for free for everyone but yes you'll absolutely find settings for that laser type by signing up as well as an amazing community of supporters that will help you work through the material. Hope to see you over there!
@ElisabethP7 ай бұрын
Which fiber machine is this?
@LaserEverything7 ай бұрын
This was done on a 30w JPT with a 110 lens :)
@abdulghaniahmedal-ameri306411 ай бұрын
so amazing, can you give name of this machine please
@alexkeyilaser21 күн бұрын
laser marking machine
@LaserEverything21 күн бұрын
This was done with a 30w JPT fiber laser from Mactron
@etiquetamz-importacoeseven711816 күн бұрын
It's Awesome, i love it. Please can you give me 3 names of the best machines, not expensives. I know a little abit about neje 3 A40640
@gauravsoni033 жыл бұрын
This is really nice , I have few more question to ask will it be good to send these over the mail with desired outcomes. Request if you could share your email addresses😊😊
@LaserEverything3 жыл бұрын
You can contact me on the discord server if you want to get in touch - that is the best way.
@krutakbari33324 ай бұрын
which price of machine
@LaserEverything4 ай бұрын
If you check out our website lasereverything(dot)net we have a buying guide with links to every fiber laser we've tried and liked
@PavelowGunner11222 жыл бұрын
Love your work and instruction my dude
@LaserEverything2 жыл бұрын
Glad to hear it! Thanks so much for watching Josiah!
@محمدالسويدي-ر2م9 ай бұрын
What is the name of the machine?
@LaserEverything9 ай бұрын
The machine we used for this project was a 30w JPT LP Fiber laser from Mactron. There is a link in our buying guide on our site if you want to take a look.
@kanhagupta168Ай бұрын
Engraver name?
@LaserEverythingАй бұрын
This video was done with a 30w JPT LP laser, with a 110 lens, from Mactron. It's in our buying guide if you want to check it out.
@phethomakhadi54157 ай бұрын
What's the name of software 😊
@LaserEverything7 ай бұрын
We used ezcad2 for this back when we filmed :)
@anikabarrow2440 Жыл бұрын
Hey, love your content. I want to sign up to support the channel and also to receive your parameters library. I see there are two options. Would either choice get me the parameters library?.
@LaserEverything Жыл бұрын
Yes, both options includes that!
@emmavella8463 жыл бұрын
Hi can I do this on a 20w laser machine?
@LaserEverything3 жыл бұрын
Yep 100% no problem!
@moustashley-thelonegamer2379110 ай бұрын
How do the lasers do the different colours?
@SikaHyper3 ай бұрын
la maquina no tira en colores, lo que hace es cristalizar los atomos de carbono con mayor o menor potencia primero quema mucho y despues poco por eso lo deja mas claro
@benji3048 Жыл бұрын
hey, im gonna buy a fiber laser, any sugestions? i was goona buy a 50w chinese aliexpress around 3000€
@LaserEverything Жыл бұрын
All of our reviewed recommended brands can be found at www.lasereverything.net/buyingguide/ Highly recommend checking it out!
@danishmughal278225 күн бұрын
Can you give me the param library of 50watt machine😊
@dandaraudragos95722 жыл бұрын
can you make the black marking claner? i work in silver costume jowlery frome silver plates(3moths) and we make some designs with some part heachet, and after that we sending /polish and paint the hach area with normal black marker ,its loocks ok buut on bigers area its faling of so if i can make the hech black and clean
@LaserEverything2 жыл бұрын
Try tightening your line distance up to something like .01mm
@dandaraudragos95722 жыл бұрын
Yup i try someting like that and crose lines on , its a little better but not perfect, i olso put the loop distance on 0.001 once and i bracke to the other side :)) the problem is that i need to do the.hach deep because affter i cut out the pice frome the silver plates need to be polishing on machine and sometimes even gold plated
@force2452 жыл бұрын
Hahahaha. I was like this guy is stealing everything from Alex; what a prick. Wait what???
@LaserEverything2 жыл бұрын
Lol I do shorts occasionally 🤣🤣
@vilalaser Жыл бұрын
How can I get this table of recording parameters?
@LaserEverything Жыл бұрын
By supporting the channel over at masters.lasereverything.net/
@SoldouttotheTruth3 ай бұрын
Can I send you something to engrave?
@stevegarland70759 ай бұрын
I have a question and I’m a nobe to laser and I just received a jpt 60w mopa laser. I don’t find all the parameters in my library. How do I acquire these for my ezcad2 program? Thanks
@LaserEverything9 ай бұрын
We have a starter parameter pack and also a community library available on our website :) We have videos on the channel here to help you import them, if that is needed as well.
@Malédiction-0122 күн бұрын
@@LaserEverything gratitude
@tusharkumarkarmakar6040 Жыл бұрын
Sir can u please tell me how to do surface black marking on gold and silver i am using 60w jpt source please provide me the settings and parameters i am facing trouble on it
@aesthetic_reels_page11 ай бұрын
Low frequency makes the dark and deep engraving .
@LaserEverythingАй бұрын
All of our shared parameters are available if you head to the Laser Everything website, there is a link to our shared library right on the homepage. It covers most wattage and lens combinations, for both ezcad and Lightburn. All made free, possible by the community support over at the Laser Master Academy, check that out too if you get value from the community resources :)
@grishmasaga95662 жыл бұрын
Hi, First of all thank you very much. Your videos are very helpful, I am setting a personalised jewellery business and got this new machine and now I am learning it step by step, I followed the process as you advised however I do not have this settings in param library. Can you please Help me? Thank you.
@LaserEverything2 жыл бұрын
Ezcad doesn't ship with any settings. You'll have to experiment and find your own. Every machine is different. If you want a starting point you can grab our library by signing up to support the channel over at masters.lasereverything.net
@grishmasaga95662 жыл бұрын
@@LaserEverything Thank you for your quick response. I am going to join soon. :)
@LaserEverything2 жыл бұрын
Here to help ☺️
@mujtabaaltayib74172 жыл бұрын
I have 30w mopa JPT laser marking machine it was working normally but now it's just light no marketing and if I restarted the machine it mark 1 word then I feel it's loosing the power, how to check it
@LaserEverything2 жыл бұрын
I suspect the power supply, check out this video to test yours: kzbin.info/www/bejne/sGialX1pl7JsqZo
@mujtabaaltayib74172 жыл бұрын
@@LaserEverything thanks for the help, issue resolved 💕
@LaserEverything2 жыл бұрын
Glad to hear it!
@daveson3D7 ай бұрын
is there anyway to get the black outline off after the cleanup pass?
@LaserEverything6 ай бұрын
I believe this mark used "mark contour" to do an outline around the engraving area after the inner space was filled. You can uncheck "mark contour" in the hatch settings to skip this step which will lessen this effect.
@hamishfox2 жыл бұрын
How many watts is your laser? I'm trying to do a fingerprint on a silver pendant with a 30W but I'm not getting anywhere near the results you are...
@LaserEverything2 жыл бұрын
This was a 30w laser. I used a 110 lens in this video - you may be using a larger lens which is a lot less powerful?
@hamishfox2 жыл бұрын
@@LaserEverythingNot sure what the lens was but I just completely fucked my laser by turning the frequency down to 25kHz. it's completely dead and I need to send it back to raycus to have it fixed. I found in the literature later that the laser source is not designed to go below 40kHz and following your settings completely destroyed it. What's worse is that this happened in front of a customer looking to buy one of these lasers. I appreciate the advice but you should maybe consider warning people to look to the manufacturer specs for your specific machine before blindly following your settings because between this post and the last it has cost me thousands of dollars and completely ruined my day.
@oscarlmont742 жыл бұрын
@@LaserEverything whats the model of the machine ?
@bf1gamer208Ай бұрын
What is the software called where you design
@mujtabaaltayib74172 жыл бұрын
My parameters library is empty, what to do to get silver setting
@LaserEverything2 жыл бұрын
You can copy them out of the video for free, but you'll have to adjust for your lens/laser wattage accordingly. Alternatively you can sign up to support the channel over at masters.lasereverything.net/ for the full parameter library download.
@vladangrujic76196 ай бұрын
which tool you use for focusing can you send the link pls or how i can make at home ?
@vladangrujic76196 ай бұрын
@@TinaYin-db3yl ok send me who can make it in Serbia or where i can order i can send you picture of laser that we have it
@LaserEverything6 ай бұрын
We measured and made it with our CO2 laser, there's lots of files available floating around for free in laser circles to make your own
@ShotByHawkDown6 ай бұрын
Where did you get the pendants from
@LaserEverything6 ай бұрын
This was customer provided
@Ladame24 Жыл бұрын
what is the name of the level and focus used for this?
@vickydesigner13 ай бұрын
Parameter not shown in my software library. From where do i get these parameters?
@LaserEverything3 ай бұрын
Yes, you have to add your own or download them. Check out lasereverything.net
@Bradisdiamond15 күн бұрын
Can this s30 engrave gold?
@QuebecoisSti Жыл бұрын
Impressive. I only have a CO2 but fiber/galvo seems to be pretty nice and quick
@LaserEverything Жыл бұрын
Absolutely! Fiber galvo's are fantastic at marking/engraving and are super agile. Co2 is great too though, especially with organic materials like wood.
@etieldagan330610 ай бұрын
Howww?!?!😭😭 Why does mine look like sh*t?
@LaserEverything9 ай бұрын
You can join one of our communities for feedback, we can try to help you figure it out!
@annagurgone762212 күн бұрын
What soft ware are you using
@msulemanhamza84813 жыл бұрын
Bro how can I make my red pointer in square to other shapes?
@LaserEverything3 жыл бұрын
Check the box that says "show contour" down by the "light" and "mark" buttons in the bottom window.
@dranrebbetanio4002 жыл бұрын
Why need an outline? Isn’t there a spot before marking?
@LaserEverything2 жыл бұрын
The outline is the spot before marking and it allows you to make sure everything is centered and straight before pulling the trigger. The red dot alone isn't sufficient for alignment.
@dranrebbetanio400 Жыл бұрын
@@LaserEverything I see. Thanks. That makes sense. I will do the same.
@rippfkmarlo6477 ай бұрын
How much did this laser setup cost boss?
@nightmareinaction6296 ай бұрын
The cheapest is around 2k to 7k
@LaserEverything3 ай бұрын
Laser details are in the description!
@learningwithcindy2 жыл бұрын
Amazing !! Where did you get the pendant?
@LaserEverything2 жыл бұрын
Customer provided!
@germanicus28505 ай бұрын
What laser engraving machine is this?
@LaserEverything5 ай бұрын
30W JPT Mactron Fiber
@lurereviews5164 Жыл бұрын
Windows 98
@ven18188 ай бұрын
Can I do it in Burn Light Software....? I'm thinking your Software is Ez2... Right...? I need to learn in Your Community... With is ...?
@LaserEverything7 ай бұрын
You can 100% do this in lightburn. When this video was made, it was atleast a year before lightburn for galvo was released, so we were stuck with ezcad 2 at the time. There are lots of video on the channel to learn with, and we have links to our communities in most of our video descriptions :)
@NoOne-sy3dq2 жыл бұрын
is there any laser that actually etches into the metal and give it grooves?
@LaserEverything2 жыл бұрын
Fibers will do that, we just chose to do a surface marking in this short but we do deep engravings on our channel regularly!
@NoOne-sy3dq2 жыл бұрын
@@LaserEverything can you please copy a link for me
@LaserEverything2 жыл бұрын
These are both good examples: kzbin.info/www/bejne/qXXKonmvjNh_gac kzbin.info/www/bejne/h4bFgKObYrSqq9E
@shashankku70435 ай бұрын
What software are you using?
@LaserEverything5 ай бұрын
This was filmed on EZCAD before Lightburn was released. I'd recommend Lightburn now.
@LevelUpTurkey111 ай бұрын
Name of the machine please and the code of it
@LaserEverything11 ай бұрын
We have many machines tested and in our workshops now, but this project was done with a 30w JPT fiber laser from Mactron using a 110 lens and ezcad2. Here's the link: market.makerremix.com/laser-machines/galvo-fiber-lasers/mactron-mt-fp-series-jpt-20-30-50w-fiber-laser-engraving-machine-for-metal-plastic-engraving-and-cutting-work/
@khaiabdurajak46713 күн бұрын
What machine is this?
@garygesell56293 ай бұрын
Wow!
@christiaanvorster19885 ай бұрын
Hi what model lazer is this?
@LaserEverything5 ай бұрын
30w Mactron JPT Fiber
@laseroflovecreations Жыл бұрын
Such a cool laser.
@LaserEverything Жыл бұрын
Agreed!
@natalycedillo33788 ай бұрын
Hola me puedes ayudar?
@MrMikey4092 ай бұрын
In the end... I want to be as good as this bloke is at engraving...
@anubis6547Ай бұрын
You need to fix that red. That shit aint centre
@LaserEverythingАй бұрын
It was centered, it's just the camera angle and the way the red is reflecting away from view. ;)
@harshgirdhar98283 ай бұрын
From where we can buy this laser machine
@LaserEverything3 ай бұрын
Laser details are in the description!
@msulemanhamza84813 жыл бұрын
Bro can you send me your library of engraving please
@LaserEverything3 жыл бұрын
www.patreon.com/LaserEverything
@msulemanhamza84813 жыл бұрын
@@LaserEverything bro I'm from Pakistan and I can't send money from out of country due to govt laws. Can you send me directly?
@KarinaMedina-ki1eh2 ай бұрын
where did you got the library settings? could you please share some info thanks
@fatimaimzriАй бұрын
I wanne know it to
@LaserEverythingАй бұрын
If you head to the Laser Everything website, there is a link to our shared library right on the homepage. All made free, possible by the community support over at the Laser Master Academy, check that out too if you get value from the community resources :)
@rippfkmarlo647 Жыл бұрын
What program Is this sir?
@LaserEverything Жыл бұрын
Ezcad 2
@brittanycrews864 ай бұрын
Can this be done with the xtool s1 20w
@LaserEverything4 ай бұрын
You won’t get the same results, but you might be able to get some kind of mark. We engraved into the surface with this fiber laser, but typically with a diode (different wavelength) it’s not typically going to dig into the metal, more surface marks and heating.
@Elai162 жыл бұрын
What engraving machine do you use?
@LaserEverything2 жыл бұрын
This was done with our 30w JPT Mactron machine, link in the description!
@CornstarLaserWorks Жыл бұрын
Hey dude I used this vid in my full length video I hope ur fine with that at abt 1:23
@allahofgaming7651 Жыл бұрын
Which machine is this one?:)
@LaserEverything Жыл бұрын
30w JPT Mactron Fiber Laser, check out our links in the buying guide: www.lasereverything.net/buyingguide/
@fayetowlson-mann26152 жыл бұрын
Wow that's amazing 😍😍😍
@LaserEverything2 жыл бұрын
Thanks for watching!
@jp.alaba.official63077 ай бұрын
What machine is this?
@LaserEverything7 ай бұрын
It's a Mactron 30W JPT fiber
@arronthompson12902 ай бұрын
What machine is this thinking of getting into it
@SidhuMooseWalaOfficia73 ай бұрын
Maine bhi yahi lagai hai kisne banaya vah contact kar sakta hai
@LaserEverything2 ай бұрын
Check the description of the video
@edygiron80442 жыл бұрын
Mestro de maestros 👍👏👏
@LaserEverything2 жыл бұрын
Haha glad you think so :D
@justinwall64482 жыл бұрын
Well this video just helped me huge. Friend brought me a sterling silver necklace to engrave. The only thing I had to do different was up the power on the first pass either because it was to reflective or some coating was on it. Once I got it to burn though the setting worked great. THANKS AGAIN!!! MERRY Christmas
@LaserEverything2 жыл бұрын
Definitely likely a reflection issue. Glad it helped you get it figured out though! I'm sure it came out great :)
@nams37Ай бұрын
Thank you sir
@LaserEverythingАй бұрын
All the best
@henriquehertz6 ай бұрын
Light Burn > EZcad
@LaserEverything6 ай бұрын
This was filmed before LB was released, so
@MahdiAlbadri-zt4bm3 жыл бұрын
V good magic im f iraq
@LaserEverything3 жыл бұрын
Hello from the US! ❤️😎
@Sebas-sg1kj Жыл бұрын
Amazing work. When you clean it at the end, is this the same as "annealing" the material? Beside of the final look, it helps protecting the surface? thanks.
@LaserEverything Жыл бұрын
Not exactly annealing, since it is basically lightly ablating the loose material off the surface to help clean and brighten things up. In some cases I would put that second pass in the same "category" as the anneal though, since we'll use it as a secondary pass to clean or enhance in some way. It can be used stand alone too as its own mark too, just depends on what you're looking for on results and what material you're working with.
@Sebas-sg1kj Жыл бұрын
@@LaserEverything Thanks for your response!
@maddylucky152 ай бұрын
Alignment not perfect 😅
@LaserEverythingАй бұрын
It is, the joy of camera angles and light reflections XD
@pittcn646 Жыл бұрын
Hi, can you help me? I need your library parameters… 😂
@LaserEverythingАй бұрын
If you head to the Laser Everything website, there is a link to our shared library right on the homepage. It covers most wattage and lens combinations, for both ezcad and Lightburn. All made free, possible by the community support over at the Laser Master Academy, check that out too if you get value from the community resources :)
@fonza8784 Жыл бұрын
What software is this?
@LaserEverything Жыл бұрын
Ezcad2
@ahjsefas85343 жыл бұрын
cool nice job
@LaserEverything3 жыл бұрын
Thanks!
@MahdiAlbadri-zt4bm3 жыл бұрын
Do you have WhatsApp
@rahmasa3d27Ай бұрын
What about setting 😊
@LaserEverythingАй бұрын
Check out our website lasereverything . net, we have settings packs for new users
@allenstotts40973 ай бұрын
What is the smallest area you can do with detail
@nailaddictsnailstudio1434 Жыл бұрын
What machine do you recommend for beginners for Jewlery
@LaserEverything Жыл бұрын
In this video we used a 30w JPT Fiber from Mactron, and it's been great for engraving jewelry. If you wanted more capability/power, going up from there. You might be able to get by with a 20w, but for the cost difference, a 30w is probably the better buy unless you need an ultra portable light machine. There's links in the buying guide posted in the description if you want to check it out
@ibrahimenesortabostan82416 ай бұрын
You can search and find this machine on Google. What is its name?
@ibrahimenesortabostan82416 ай бұрын
@@TinaYin-db3yl thankyou
@LaserEverything6 ай бұрын
This is a Mactron 30W JPT Fiber
@dcheng2714 Жыл бұрын
Nice video,but just wanna ask why does the laser run the pattern again after finishing the pattern/design?
@tylerdurden7280 Жыл бұрын
I would guess they have it run twice
@LaserEverything3 ай бұрын
It's part of the settings
@looksofficial8949 Жыл бұрын
Hey apa laser fiber 20w bisa menggrafir rubber/ silicone ?
@LaserEverything Жыл бұрын
It can do rubber, but will take a bit of testing and being careful not burn it up or melt it. Co2 lasers are a bit better for that material.
@wolfnoggin21659 ай бұрын
It’s crooked
@LaserEverything9 ай бұрын
The camera angle may make it look that way since we are holding at at an angle, but it didn't look crooked at all in person :)
@Mansi_Flute_India4 ай бұрын
Which laser machine is this?
@LaserEverything4 ай бұрын
This was done with a 30w JPT fiber laser from Mactron. Our site is being updated currently, but we'll have updated links in our buying guide of our site soon if you want to see the exact model.