Learn Onshape - Project 19 - Handlebars

View Drawings & Worksheet - drive.google.c...
View All Onshape Projects - cadvideotutor.com?authuser=1
With these CAD video tutorials, quickly learn 3D CAD sketching and part modeling with Onshape. Watch all of the playlists to see and learn step by step how to create a 3D parts in Onshape. You can get a free Onshape account by using the link listed below. Also, choose the playlist in order that will guide you through the cad video tutorials that demonstrates over 20 projects resulting in your learning to use many of the sketch tools and feature tools available in Onshape for 3D Computer Aided Design and part modeling. All of this for free, free lesson, free software from Onshape. Start learning today
Get a Free account at Onshape: cad.onshape.com
Follow these Playlist Links for all of the Projects:
Lesson 1 - goo.gl/HFGB9e
Lesson 2 - goo.gl/ofPYLv
Lesson 3 - goo.gl/ikGh6E
Lesson 4 - goo.gl/Fc8FQb
Lesson 5 - goo.gl/AWuJjK
Lesson 6 - goo.gl/A88Wew
Lesson 7 - goo.gl/WzHTFS
Lesson 8 - goo.gl/HFGB9e

[@flavius8278]

thank you so much for your tutorials.

[@EricAlainDufresne]

Thanks, I enjoy your tutorials.

[@gibbedyg9369]

I like your style of instruction.

[@edgarukhurebor469]

Thamks for this tutorial . It was very helpful!

[@shoaibsiddiqui9188]

Superb!

[@17hmr243]

thank you :D

[@rachels6403]

This is really useful, thanks.

[@Jedders1968]

Many thanks for this training. It's still relevant in 2022 and I've picked up a great deal of useful tips and quicker ways to get to the end result.

[@Onshape.Learning.Projects]

Very welcome!

[@sergeanthuman]

i have a big question. is it okay if i use auto cad to draw this while you use onshape?

[@l-phxn1xm-l]

Amazing Tutorial! But I have a question. What is the necessity to hollow out the ends of the handlebar?

[@LearnZap]

The sweep command creates a solid along the path. Using the shell command will hollow out the handlebars leaving a wall thickness that is specified for the tubing. Both ends are chosen to shell to ensure that both solid mirrored halves are properly shelled out to the specified wall thickness.

[@naracn7662]

What the hell, i dont have Use tool, i cant follow your tutorial

[@Onshape.Learning.Projects]

Hi, yes you have this tool. Make sure you are in sketch mode and you will find it on the tool bar. Sometimes you have to push the down arrow to see all of the tools hidden under the visible tool. See this. cad.onshape.com/help/Content/sketch-tools-use.htmf