Lefty Log Splitter | RUGGEDMADE 22-Ton Push Through Gas Log Splitter Review | w/ Log Lift & Catcher

Price the RUGGEDMADE 22-Ton Push Through Gas Log Splitter on Amazon: amzn.to/2lCV71g
Push-Through Log Splitter - Many of the log splitters you see sitting outside large stores have the splitting wedge attached to the hydraulic cylinder rather than the opposite. RUGGEDMADE has a very nice push-through log splitter that we feel has better ergonomics and also are more efficient than many of the other models we have tested. The RS-322-E-LK is a 22-ton log splitter that is the most affordable in this line. RUGGEDMADE does make larger models that can handle larger logs in the same configuration.
This unit will come nicely packaged on a pallet that has a wooden box over it. RUGGEDMADE does include instructions, but we highly suggest watching the assembly video they have on KZbin. some of the hoses are very close in length and can be used in different areas by accident causing some frustration. If you watch the video, that will not happen. Assembly of our machine went very smooth and it was up and working within a few hours. There no real break-in needed, so once the log splitter is assembled, you can get right to splitting wood. we recommend that you check your oil each time you start the unit and always add fuel stabilizer if you use fuel with ethanol in it.
RS-322-E-LK Features
4" cylinder - 24-inch stroke with a 2.25-inch rod
212cc electric start engine, OHV, cast-iron sleeve, low-oil auto-cut-off switch
13GPM 2-stage gear pump
Single-Spool Valve with Auto-Return
Tow Hitch takes 2 inch Ball
10 inch Wheels with Fenders
Slip-On 4-Way wedge
Log Cradles
Log Lift Kit Includes Bipod Support Leg, Hoses, Lift Cylinder, Valve & Valve Platform
Catcher Tray Includes Locking Pins
One Year Parts Warranty
Log Splitter Ergonomics
In discussing ergonomics, let's first talk about where our experience with log splitters comes from. Both Jeff and I grew up burning wood for heat. Both of us had family in farming and both our parents built log splitters to run through the power beyond system on the tractors the family owned. The log splitters our families made were pretty simple and were a push-through system with the splitter sitting stationary, similar to this RUGGEDMADE. These log splitters were mounted on the three-point system on a tractor so they could be raised or lowered and we worked hard not to be picking up logs to split as we would bring in wood by the semi-truck load. As we both were old enough to weld, we changed items and replaced the splitters with updated models we designed to make things faster and more efficient.
With that said, when we use the normal log splitter you would see at Tractor Supply, with the splitter attached to the hydraulic ram, we feel like everything is backward and get frustrated when a log is stuck on the ram. When we saw that RUGGEDMADE made a unit similar to what we used to use, we got excited as it seems to be more efficient for someone who wants to split wood at home with a small machine. Items that made us feel at home were the height of the beam. It is close to being waist height. There is a decent amount of rook to work and we are not straddling a wheel, fender or oil tank. The valves are centered and can be used from either side. That is important to us because we normally split wood in teams and sometimes the guy on the other side wants to take over for a log or two.
The overall cycle time for the full 24-inch stroke is 12 seconds. That is not farm tractor speed, but it is pretty good for a machine that runs off a 212cc 6.5hp motor. The pump on this unit is a 13GPM 2-stage pump. The two-stage pump allows for higher speeds when large amounts of power are NOT needed and when there is significant resistance, the pump switches to low gear and moved the ram slower, but provides more power.
The design of this unit was meant to split logs up to 18 inches in diameter. If you will be splitting logs larger than this, we would suggest a higher power unit. The 4-way blade is good for smaller logs and it can stall out the unit on large close to the max for this unit.
What's Included?
22-Ton Log Splitter
Slip-on 4-way Blade
Log cradles
Fenders
Hydraulic log lift
Log catcher tray

[@Jim-hp4le]

On rare occasions, fluid can ride up the blade of the dipstick causing amounts of fluid to eject out of the vent/dipstick hole. You can remedy this extremely rare circumstance by simply rotating the dipstick plug a 1/4 turn. The wd-40 cap / trick is absolutely necessary and is always a good idea when transporting!

[@dannyh.7490]

I’ve never seen a log splitter of this type . It looks very efficient! I like that it can load the logs too ! A back saver for sure !

[@jacobfilla5684]

great vid keep up the great content

[@kirkkw]

According to Rugged Made the lift table can be installed on either side. Therefore its not left-handed only.

[@Lakecenterlawncare]

I have the 37 ton, I assembled mine and put the log lift on the other side. You should be able to switch it to the other side.

[@outbackbob2008]

I'm waiting for a Wolf Ridge splitter in January.

[@frankiejones4816]

Log lift can be mounted on either side.

[@edrem9483]

What can you tell me about the Raven engine? Is it a quality engine?

[@kirkkw]

The link to Amazon results in a price that is $1,100 higher than a direct purchase from RuggedMade.

[@Lanninglongarmmowing]

Finally, a left handed log splitter. Lol. Does the engine charge the battery?

[@WorkshopAddict]

Said no one ever! Yes, it will charge it slightly.

[@josevelasco3245]

I am looking at this model - so if I move the log lifter to the other side and swap the hose location (and get longer ones), will the lever be on the correct side or still have to reach over? I think this is what you guys were getting at but wanted to be sure.

[@WorkshopAddict]

Reach over.......

[@josevelasco3245]

@@WorkshopAddict ok got it thanks

[@mikelovell3972]

@@josevelasco3245 One could also switch the lines at the control valves so you would not have to reach over the log lift lever to split, but the lift is on the side it is in the video so it is opposite the side with the engine.

[@yellow3222]

I seems to me . You would want to throw the split firewood with your right hand .

[@disturbedsilence76]

This one is the half beam model, how does it compare with the full beam? they have both at 22 ton so what do you guys think?

[@WorkshopAddict]

After our use with this model, we steered clear of the brand because of the economics and build quality. Plus the fact that the company called us and asked us to remove this video as it hurt their brand.

[@disturbedsilence76]

@@WorkshopAddict thanks guys! Hopefully this will make the company step up their game and try harder. Keep up the great work!!

[@ryankremer9832]

WorkshopAddict which things about the build quality made you concerned, besides the hydraulic breather cap and battery holder? Which brands DO stand out to you? Also, thanks for posting a good, honest review.

[@rsellers]

@@WorkshopAddict Thank you! You get what you pay for holds true!

[@dineshjangra4554]

Sir how to make air impact wrencher at home

[@WorkshopAddict]

Dinesh Jangra can you cast aluminum?

[@jimwilloughby]

If I had a fireplace to burn wood, I'd have that splitter because I'm a lefty.

[@georgeprice6252]

You never Mentioned the price of this log splitter

[@derekluchik7960]

Couldn't you just stand by the lift and it would be a right handed splitter? That would be the smarter way to operate it.

[@allyalegra3813]

Wuhan log splitter