I turn 4 stroke into 2 stroke engine

Let's Learn Something: Project no.25
Good day, guys :)
I got this engine from a junkyard and the cylinder head is full of rust so I decided to turn this into 2 stroke. And I know that some of you want also to know if it is possible to turn a 4 stroke into 2 stroke engine.
I want to explore my knowledge into something different that I never tried before.
Primeweld TIG225 AC/DC:
primeweld.com/...
Primeweld TIG225 AC/DC (Amazon):
www.amazon.com...
Primeweld TIG225 AC/DC (Full review):
• TFS: Primeweld TIG225 ...
2-stroke VS 4-stroke | Offroad Engineered:
• 2-stroke VS 4-stroke |...
online shopping on bangood: ban.ggood.vip/...
download banggood APP to get $20 off new user benifit
banggood support COD free shipping on $19.99
• Playlist for all videos: www.youtube.co....
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
HERE: www.youtube.co....
#TURN4STROKEINTO2STROKEENGINE #HOMEMADEENGINE #BUILD2STROKEENGINE
Don't forget to SUBSCRIBE.

[@letslearnsomething30]

Hi Guys, You can check my Second Channel and help me reach 1000 subscribers. Thank you and stay safe. kzbin.info/www/bejne/b5LFhJ6Cj5t5n9E

[@joneserupinsmoke9161]

Bro ur the man keep it up.its Unreal what u do damn near ni tools kid.I dnr know where ur living but if u were o come to the u.s u would have a lot of promise here bud

[@joneserupinsmoke9161]

And if u are in the u.s u need to get a hold of the right people u can go far

[@joneserupinsmoke9161]

I can't say it enough but ur the man bro

[@joneserupinsmoke9161]

Yea I dnt know if u made it to the u.s yet but u need to bro

[@viorelpopescu4990]

@@joneserupinsmoke9161 ........ De ce in SUA? Care e problema? Toate mintile mai luminate sa mearga la voi sa va umple de bani SUA............ ca intodeauna

[@Richie_RHD]

It's not often I'm shocked. But this whole video my mouth was open in awe. And appreciation. I am blown away.

[@ryandetrick2825]

Same...

[@kennydeever4941]

Some of the things this guy does, takes others months or years, he's a genius

[@catastrophic_music]

How to make a D.I.Y engine out of a everyday household item.

[@gelooleg6741]

Ngabangus nn seteh

[@Mohawk52x]

Honestly, give this guy better filming equipment and a friend to help hes editing and filming and this could be one of the best building contents on youtube

[@Sqwan2]

Well, leave it as it is, and it already is one of the best building contents on youtube.

[@fizaraja2205]

Odvar So True man 👌

[@Youlikecrap]

It's already good

[@careymcintosh5272]

Why, it’s great as it is.

[@Scazukie]

It all looks good already

[@jimjohnson1304]

Beyond impressive with the tools used. That old pit bike motor was CLAPPED.

[@robertsanford9665]

You’re one of the best mechanics and engineers I’ve seen on KZbin and in the real world. I just wish you spoke and explain to people exactly what you’re doing.Again you do some amazing stuff. Keep it up

[@johntomasik1555]

Having been a mechanic, fabricator, got my mech e degree, worked as a product development engineer for 20 years, then into managing product development teams and engineering/development departments, a guy like this would be a diamond to find. Might not be a true engineer, but anyone who can be assigned a task like this and land on his feet is 10 times better than an academic champion in an engineering program. What I discovered over the years was that finding a degree'd engineer with practical experience was much more productive than finding a PhD.

[@grokster9ontheroads174]

John Tomasik I have been a mechanic for 38 years. Got my training in marine corps institute and we had to learn everything from all the different welding types to rebuilding engines and transmissions and we had to fabricate parts on our mill and lathe in the recovery vehicle. Even with all the training and experience of working in different units, I stilll couldn’t land a job as a mechanic in the civilian world so I opened my own shop. Seems that in this country,unless you pay someone offf,you can not get a good job anymore,it’s that or having a friend refer you. So now I collect my disability and work in my own shop privately and videos like this give me ideas. I have one for powering a go kart with an electric motor powered by a generator head connected to a small engine because the electric motor has more torque and instant speed than the gas Motor and it revs so high you don’t need a transmission. A superior Gokart. A hybrid!

[@johntomasik1555]

@@grokster9ontheroads174 Way cool! I was working for Cat when I went back to college. I'd run across the academic types, who knew little to nothing about how sharp mechanics and tradesmen can be. Many mechanics at Cat had numerous patents. I'll never forget I was at a party and a bunch of college people were there. They were talking about their degrees and I mentioned I was a mechanic before talking about my major. One girl piped up and said, "oh, yeah, well we need those people too." Cracked me up. My son's a cert'd master tech for Lexus. It was amazing to see his logic improve drastically as he gained experience as a wrench. My dad got his engineering degree in what was Czechoslovakia. What was really cool about their engineering programs were the students would be in class in the morning, and in the shops working in the afternoon,. That practical experience really set their students apart as apposed to many who come from our programs here and the only thing they can do are the problems in the back of the chapter.

[@realmanontheland4811]

I have been welding over 20 years in America, I have gained certifications and lost certs. in many processes and materials through A.W.S. I'm mechanically inclined I if I ever have a shop I would like my Measurements to be metric, reason is because most of the Engineers firms Canada, Mexico and America metric for products. Company's Engineers draws it on a Cad in metric then transliterated in the Standard Impreal measurement. Alote of the time it's the Welder Fabricator becomes the Engineers best friend. Countless hours of wasted time redoing math and materials.

[@casey360360]

I wish more people had your attitude. EVERYONE that's got a job listing around me for a welder/fabricator/mechanic requires a 2 year degree. I get turned down all the time for positions even though I hear it all the time, "your portfolio (a bunch of pictures I've taken of my work over the years with detailed explanations) is very inpressive, you're a more consistent welder than our lead." They always tell me that they can't hire me because I dont have a degree.

[@johntomasik1555]

@@casey360360 It's gonna depend on what you're applying for. I couldn't hire a non-degree'd engineer for a true engineering position unless he had proof he could do that work. A lot of people confuse mechanical design with engineering. It isn't the same. Engineering, at least many of the disciplines, is the use of the laws of science to predict what a design requires to do the job. As a n example, I did a structural analysis on some wind turbine blades. Without my training in statics, dynamics, physics, and materials engineering, I couldn't have done that work properly. This is in no way a jab at you. I don't know what you're applying for. There are most certainly situations where I'd take experience over a degree, if it's allowed. But, there are engineering jobs that do require the academic training. It's just that those with practical experience AND that degree far outshine someone who was just an academic.

[@jayburrough4308]

Guys like this will never get the recognition they deserve he's a freaking genius .I enjoy every one of your videos........how many of you in the comment section could've pulled this off.if you say yes I want to see some your work also.

[@erikgreenaway8645]

You're completely right Jay! This guy is unbelievable and his videos are outstanding. Not only can he do the work, but he's able to share it with us all in a highly detailed an enjoyable fashion. That is a talent just in of itself, never mind the mechanical ability.

[@phillipbartlett1819]

Maybe in a million dollar machine shop with unlimited resources, and that's a big maybe. He is unbelievable doing what he does with what he has got. Amazing

[@steffentysnes5302]

Well, if I were to be honest, I could actually probably pull this off, would've never thought of it, but yeah, could probably do it. That being said, this guy is something else, yeah

[@steffentysnes5302]

Reason being this is mostly about porting and welding. I dabble in both areas

[@NavinBetamax]

@Steffen Tysnes.......I agree with you here and there.....Lol !

[@TheOliveboy93]

Guy: “ I bent a valve setting my timing” This Guy: “no worries, dont need em”

[@markkk04]

Dad: ''Buys his son a 4 stroke bike'' Son: ''No dad, i wanted a 2 stroke'' Dad: Hold my beer

[@tarikhulmahfudz7829]

Son: umm dad should i drink it ?

[@Murat-eq3cr]

And my dad only left me credit card purchase

[@gillichbalint2991]

My dad will never buy me a bike :c

[@6.7ryan87]

Gillich Bálint you guys have a dad? >:(

[@colorblindgp6229]

Lmno

[@krisanctil794]

Hats off to you, my friend. I'm a mechanical engineer, engine builder, and machinist; I am very, very impressed with your work.

[@callmerel2809]

I wanted to be a mechanical engineer, so if i may ask, can u build a 2 stroke engine like he did based on your studies ?

[@xlordxsithxroyalmiller3185]

Agreed. Impressive critical thinking and application

[@Hellsong89]

@@xlordxsithxroyalmiller3185 That and i'm really impressed he manage to weld that oil soaked engine block so well. Usually those cast alu parts have so many porous holes filled with grime and oil that welding it becomes nightmare, but he got perfect welds despite all that.. god damn...

[@billjacobs8035]

Hopefully he will be able to get in an engineering environment. With the skill set he has at this age he would be a great asset for SpaceX and than Mars 🚀

[@coolbro1229]

A 2 stoke does not have a oil plug you mix it with the gas

[@roguetactical852]

Can we donate to you? You deserve support for this badass work!

[@TamNguyen-sz8tz]

look on how many ppl views he make more money then you lolz

[@bumbum3023]

@@TamNguyen-sz8tz ok

[@tracylash91]

Its people like you that made amarica

[@todensarg]

@@tracylash91 what?

[@IxAxDxTxRxI]

To all the guys out there with 20000$ worth of snap on tools, this guy does this with a 1/100th of the money

[@gloryholdofficial]

Haha this video has 4 million views that like 35 grand

[@am0804]

Uh no more like 2k if lucky lol

[@blucz883]

Nope u dont know how that shit is expensive... No normal guy cant do this

[@am0804]

@@blucz883 I’m talking about Glory Hold’s comment

[@reubenhooft541]

1/1000th of the money,

[@abelhorvath9352]

I love how he just casually bought that Tig machine because "ooops we need welding"

[@bamidelefadimiluyi9149]

Lol yep

[@justgottasendit8825]

Yeah lmao

[@lake258]

And did perfect welds from the first time!

[@gavinmcvey8177]

It was because he needed it to weld the oil passages and prove that it could be done to his subscribers use yer head

[@cid4887]

Most probably that's for free or discounted tremenduously for the seller knows it'll be used in youtube and that will be a great advertisement.

[@Thenormalguy_real_one]

Imagine this guy in a apocalypse

[@z06jakee]

The normal guy what do you mean imagine with this corona Virus shit we basically are at the starting of one

[@paulslevinsky580]

That'd be like another regular Tuesday for this mad builder.

[@z06jakee]

Evermore and to buy toilet paper

[@inspireonex]

@@z06jakee well shit yeah

[@guessnot8015]

Apocalypse is starting bro relax

[@Hasnain4554]

next turn 2 stroke engine to 4 stroke

[@unikdwiki]

😂

[@agungdwiveryanto5702]

😂

[@cursetheserpent]

That’s how we ended up with the modern 450f. When Yamaha made the first 400f it was built by converting a yz250 into a 2 stroke with a 4 stroke top end from a street bike

[@aidenshepard9980]

Haven’t even watched the video I can already tell that’s gonna be easier

[@fakerio9901]

Watch the video in reverse bud!

[@mickgrimes9078]

this is SUPURB. being a machinist and engineer, i LOVE the drill press mill with the cross slide table. you gotta do what you gotta do and you got it done. 10/10 this kind of "just messing with stuff in the garage" taught me sooo much as a kid.

[@tonybowman7790]

This Guy made me feel like a novice and I've been working on all types of engines for 60+ years

[@vidkid01]

You are a real one for recognizing and acknowledging another person's skill with humility👍.

[@darksideloneliness73]

Not just you.. ever since my hands on various types of machine. This guy just ripped of my experience into nothing. That said because i have experience less than 20yrs.. yet..i need lots to learn

[@nicholasryan8232]

Me, before clicking : Lol probably wont work. Let's just watch anyway. LLS: *shows a running engine* Me, after the clip: Probably work for short period of time lol. Let's see how he do it. LLS: *puts it in a bike then goes to town* Me, after the whole video: SUBBED.

[@gayetreeluximon6809]

Nicholas Ryan and I will be a good day

[@Sakiboy66]

same bud

[@ryannicholas9246]

Wow

[@sham903]

lol, same

[@juanpabloolayamesa418]

Same

[@fredsmart9195]

Incredible engineering skills, I have worked in automotive PD for almost 30 years and a motorcyclist for 43 years and truly never thought this was possible. Well done on your application to the task, truly superb.

[@cannonandre9513]

This is awesome., I tune two strokes as a hobby but this is next level. I think your exhaust port is too small. If you make it bigger you might gain some more performance from your engine. Moving it upwards also gives you more top end peformance. SO cool

[@runtissmodlab1492]

I agree, that port looks absolutely tiny to me and i can imagine it being a massive exhaust bottleneck.

[@j.4308]

most youtube channels should use this guy as an example of how to properly use time lapse...

[@jarbeefis]

Imagine the crazy ideas that would come alive if he and Colin Furze collaborated.

[@JohnDoe-we9yk]

These guys will be ban from NUCLEAR EXPERIMENTS 👍🙂🙂🙂🙂

[@evaristoalfredopedrazapala6543]

Jh

[@offroadguygavin6074]

Holly jeez

[@zmoney881]

Let’s NOT imagine XD

[@bigolefuckngtweaker4454]

They would prolly figure out Time travel

[@backyardbashing6136]

I no longer know what is possible. That was absolutely amazing.

[@TomBudin]

i cant believe this ended up on a motorcycle, amazing hahaha

[@dzulj3874]

When a motorcycle drag race season is around the corner, you probably wanna be friend with this guy.

[@TrevorPhillipsEnterpriseRx]

He'll turn your moped to helicopter

[@dzulj3874]

@@TrevorPhillipsEnterpriseRx I heard he already done the Nimbus 2020.

[@nonsense0233]

i hope one day you have the machineshop of your dreams

[@creative4099]

I also do youtube about recovery, please support me

[@CuriousGoose]

@@creative4099 don't fish in another man's pond.

[@noahdenver1359]

@@flyingfish7072 lmao

[@simon.scurtu]

Not only am I amazed at his engineering skills, but where does he find so many old 125cc engines from?? I wished I was able to as well 😂😂

[@somethingsfishy2695]

I hope some manufacturers start sponsoring you already, these videos are the best, entertaining and well produced, keep it up!

[@giggitti]

This dude could turn a can of bake beans into a 2 stroke motor i reckon .

[@gabrielgalaxygh]

@@owzmo you're crazy. 2 strokes sounds the best

[@kaleb54354]

Lol ikr i have a 1993 honda cr 125

[@jordanadams7475]

@@owzmo 2strokes sound like a great weekend. 4 strokes sound like your days about to get rained out

[@teddybeer1757]

Just one thing, can you keep the oil pump on the engine? I have seen that you removed it. Won't that make the oil unable to lubricate the gearbox? Because afaik the oil pump pressurize the oil to spray on gearbox and crankshaft, now that won't happen right? And could you keep the electric starter intact? Do you have make it kick start only?

[@cryptosky4823]

And so

[@actual_brog]

Whoever finds this in 50 years is not going to be able to tell what happened here

[@randomwordbot]

Good luck finding parts

[@tebibyte2357]

@@randomwordbot thankfully this is not new for 2 stroke engines, if the cylinder expands he's gonna have to machine a new piston but this thing doesnt rev very high so if this piston cracks all he needs is a new 125cc piston.

[@ruckus1009]

@@randomwordbot you really thing he cares about parts . he will make them

[@sizzlean9459]

Whoever finds it will know one thing for sure, it wasn't an engineer who built it but instead a real man with real skills who actually worked on the shit he built and designed. By the way you are only kidding yourself, any motor enthusiast would know instantly because all real men have dreamed of turning their POS 4T into a real engine (2T)!

[@PopaAlexandru.]

@@tebibyte2357 Another engine, original in 4T.

[@edwinbomb355]

this guys is full on diy fabrication mode, i love the ingenuity

[@stevepitbull]

Dam, imagine this guy had real machines to work with?? Come to my shop here in NY. You have a job if needed.

[@fidelcatsro6948]

Wow!!!! like Thomas Edison inviting Tesla to a job ;)

[@joshuachamberlin1189]

stevepitbull you now this is a nice offer

[@jets8991]

I've done a bit of welding, worked on both 4 stroke and 2 stroke (gas and diesel) engines, experimented with porting AND watched this whole video and still don't know how he managed to do this with no instruction. Guy is a genius. Don't know that I could pull this off even if I had all the tools even after seeing all the steps. Serious props man.

[@thefreedomguyuk]

2 stroke diesels ? Was that in ships ?

[@jets8991]

Morten Kristoffersen by that I meant ive worked on and familiar with the operation of just about any engine configuration out there. not claiming to be a genius by any means but can't speak much for the shipping industry. but 2 stroke diesels do exist and were popular in the trucking industry until the EPA became more involved. Best example is a 2 stroke Detroit diesel

[@thefreedomguyuk]

@@jets8991 Wow, didn't know that, will bone up on that. Sounds really interesting. Thank you for sharing!

[@thefreedomguyuk]

@@jets8991 Been enjoying videos of Fire engines. I must say I was ignorant, as I thought 2 strokes mainly were maritime. I want to drive a 2 stroke truck. The sound is sweet!

[@FonicsSuck]

Came for the video, got a bonus unboxing. What a pleasant surprise!

[@Facewest]

Excellent editing skills!!! 2 Strokes rule.

[@uconsaa]

this video is an answer to a question i never asked.... BUT I LOVE IT!

[@catchchandru]

Brilliant work. Great conception brought to reality by converting 4 stroke to 2 stroke. Hats off to your confidence and thorough knowledge. Many professionally qualified wouldn't dare into this

[@dafily1697]

Hi man! I know now how philippians mechanix are really badass technician and they have high level skills ! congrats forever !! This video much be learnt by all youtubers spend all time in narration, here: action, explanations on videos, and no... words, just the noise of the machines !! thanx for simplest way to share your passion with us.

[@user-tm9wk1wp9j]

Я не знаю иностранного языка, пишу на русском. My English is very bad, i Russian. Это реально круто, сколько лет работаю с двигателями, а нам с ребятами на работе такое и в голову не приходило! Потрясающая работа! И хорошо с аргонно-дуговой сваркой справляешься.

[@sammarley1972]

"Poor mans milling machine" I haven't even got a drill 😂😂😂

[@tonyfremont]

If this guy had a CNC mill, he'd be running the planet before long. Elon Musk should be hunting this guy down. He could cut space launch expenses by 85%.

[@YeeThirty]

This is how i milled shit... crappy 200$ drill press and some cutters

[@lofturhjalmarsson9896]

dont know why he milled that bit of that circular barrel thing

[@user-jt6nw6wm5q]

@@tonyfremont calm down haha, any skilled mechanic could work this out

[@liamwilliams7782]

For fuel a 2stroke doesn't work the same as a 4stroke so where his reed sits it wouldn't get fuel to the top of the piston without him doing that normally on 4 stroke the carb goes to the barrel top end & a 2 stroke goes to bottom crank up so if he didn't channel it fuel would never make it to the top of the piston as it's a 4 stroke abit complicated to explain but in that kind of way is how it works what he done was needed for sure

[@MrVeryCranky]

One of the best presentations I've seen for a long time. Your editing and appropriate use of timelapse without dwelling too long on any aspect. Well done, and you blended your sponsors advertisment nicely into your presentation.

[@lucadonorio1815]

Wow that’s insane man I thought this was impossible till I saw this

[@Chan_Davidz]

Masterpieces don't rely on tools, they depend on creativity.. Keep it up 💪🏻💪🏻👍🏻👍🏻

[@chris993361]

I have watched a number of your videos now, and you are a truly impressive individual. Your skills never cease to amaze me. Keep up the good work!

[@silvia_fuku0ka845]

He really went to town with that engine 🤣

[@frankyboy1620]

Got I lost

[@vannakkeo7453]

You're truly a gifted talented mechanic! Very motivational

[@beckerf4n]

omfg, he's a genius, this guy is not millionaire cuz he doesn't want to.

[@gthesuperman903]

Might as well just invent the 3 stroke engine after this

[@WillMoxonFloatsOnOil]

Lmfao

[@mc__mauri8863]

it is called wankel

[@mc__mauri8863]

@@the_harbour_boys rotary engines has 3 "cycles"... intake, combustion and exhaust

[@ninjabudd]

It’s called a rotory engine

[@jracer7189]

It’s been done already

[@ianstyles9759]

That is absolutely amazing. That guy needs a full shop with fully stocked tools and a CNC machine with all the bits.😎

[@austinsmith9413]

As someone who has ported over a half dozen 2 stroke engines, I was half surprised that it ran with that small of ports. If I were you, I would triple the width of the exhaust port and enlarge/reshape the transfer ports. You could easily triple the power if you do it right.

[@robertjones6994]

Ive been going through these comments and I agree with so many of them about his skill and knowledge and what not. But then I saw this and I thought the same thing. The ports needed to be bigger and reshaped. I dont even know advanced 2 stroke techniques, and I was thinking "you know, Id make those ports bigger and reshape them" It was so cool I came across your comment and it was like we were thinking the same thing!

[@Jamie-cz2xu]

i wouldn't have believed it if i hadn't seen it with my own eyes. It just goes to show. When you see a problem and your answer is not "It's impossible" but more like it is possible if we can find a way to do it.

[@vincejoseppeaban1450]

Now im proud to be a Filipino. Knowing that you are from Philippines makes me think that we still have a world class machinist.

[@louisangelicavalle9411]

lupit nya tol

[@lodihek7983]

Pinoy pala

[@Darremedy1021]

sure ba? pinoy talga?

[@vincejoseppeaban1450]

@@Darremedy1021 yes sir, taga Naga i guess.

[@bscs1b_galvezisaiahdanielc744]

Kala ko ako lang pilipinong nanonood dito HAHAHA

[@DPTech_workroom]

You can build one milling machine! I believe in you!

[@johannesmuller1288]

no he cant

[@johannesmuller1288]

he just used a drill press for milling and ignored the fact that a drill press isnt made for that use

[@loganporter1760]

So what lol

[@loganporter1760]

He used a drill press perfectly but didkt realize that a mill was cheaper then a tig welder

[@TheOliv1784]

The lack of air filter on that carb! But nice video. Im impressed :)

[@carloscondedealmeida4281]

It is simply amazing the capacity and competence that this "engine sculptor" has ... he is the engineer, the mechanic, the turner, the welder, in short, the full accomplisher of something that any expert would say is impossible to do, even more without the precision equipment he didn’t have… this guy is a magician!

[@sizzlean9459]

Disgusting you called him an engineer, almost as if you don't know how engineers got us into the fucked up place we are in today. Engineers are scum and none of them have ever even tried to work on the trash they create and that is why we reserve the name solely for their ilk. When have you ever seen an engineer work?

[@carloscondedealmeida4281]

@@sizzlean9459 Dude, I think you may be right in part of what you're saying, but I don't agree with everything ... First, I disagree with radicalisms and generalizations, which is always dangerous and unfair, since every issue has at least two sides to be analyzed ... Secondly, to say that all engineers are incompetent and the only ones responsible for all the garbage that this capitalist consumption system generates, is like wanting to blame only one soldier, for all the deaths on a battlefield. Take it easy guy, because if the scale hangs just to one side, it may be because it’s unregulated, or broken, or maybe it’s not the right scale for what you’re trying to weigh ...

[@bradley1995]

Uncle Ronnie was trying to add 2 more strokes to his screaming eagle. Maybe you could help him?

[@carsonkirby4913]

Bradley n Emilee forever 😂😂😂

[@louisparker57]

Hahahha I saw that same video that's hilarious

[@louisparker57]

@@carsonkirby4913 so what lol

[@maacpetzol2205]

Raise hell Praise dale

[@rustybum2]

Some people may ask "why, what's the point?" I simply want to say how UTTERLY AMAZED I was watching this video. Top quality editing, content and skill. Thank you for sharing, from an old Yorkshire fart in Ireland and good luck for your future.

[@damnfunnychicken]

^-- this .

[@vladimirvladimirovichputin1352]

Next video: I turn oxygen into diamond

[@alexcrafter_]

NOT ONLY DID HE TURN A 4T into a 2T BUT HE EVEN MADE IT LOOK GOOD. wow, ur talented ngl

[@bl00dh4nd4]

10:30 poor man's milling machine, man I can't even afford a drill press!

[@Kampadakis_Junior]

Next, turn a 2 stroke engine into a 4 stroke.

[@rahmatdean4931]

Difficult

[@bhlirsucha2969]

that would be something., but i guess thats not easy.

[@scriptkiddie9441]

i think he made it already..

[@mototech924]

2 stroke is realy easyer than 4 stroke. That's the reason why you can turn 4 stroke in 2 but the opposite is too difficult

[@mototech924]

@Gabriel Rezende I didn't said that's impossible but for building 4 stroke machine you need more resources, factory machine,...

[@supertramp6011]

First tig welding project,genius level engineering. Much respect,amazing!👌👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@rastamanralph6670]

Anyone can do what ever they put their mind to. You sir are a genius without a doubt!!

[@dafily1697]

So no anyone, only some few people are interesting to realize what they've got in their mind. Today in our consumer way of life, lot's of us just want money to buy something, not to build it or realize it...

[@waddney4121]

16:01 next time press the crank off from the crank pin, if you press the pin through the crank you can damage the crank

[@Toolingabout]

The good ole “American Eagle”

[@MrShawnlamb]

Man I can't get enough of these videos ' another awesome build man.

[@nodnodvlog9594]

The way i watch your videos about engines i have so many lot of learning on what is the differnet betwwen 2 stroke and 4 stroke keep up your good work bro thank you for the knowledge😇

[@DLGNT]

This is one of the coolest things I have ever seen

[@pabitrikalita3940]

Man you are am my friend, you are the most talented guy I have ever seen Respect you from heart

[@spiritualawake2984]

From a 15 year heavy equipment mechanic I'm pretty damn impressed

[@iamtheonee2728]

This guy is an engineer. Mad skills bro

[@kowski9477]

Excellent job . This young man just showed a higher level of knowledge ....and no, I don't obtain the understanding of this but when I see something that impresses me i understand Ive got a long road ahead of me.

[@EvenTheDogAgrees]

Hahah, love that Amazon thing. AC TIG welder: add to wedding registry. :')

[@siddhantabhishek]

Amazing........ I was always searching for 4 stroke converted to 2 stroke engine video but today it turned into reality........ Now 2 stroke conversion in 4 stroke engine video.... Please

[@MRJAYWILSON]

No your weren't, there's millions of others but you don't like them cause they are American or from a different country.

[@jayburrough4308]

This guy is a mechanical genius

[@georqedubyakush6066]

Jay Blanton you seem like a loser lmao

[@creative4099]

@@georqedubyakush6066 I also do youtube about recovery, please support me

[@trentjackson4816]

Far out. Incredible. What a laboriously complex apparatus. You would have no problem getting a job in Australia with your skills. 5☆

[@2stroke4me]

This is the best thing that ever happened to this engine!

[@PopaAlexandru.]

Of course.

[@nathanpeck5155]

That was awesome, now I wanna see a gas engine converted to diesel!

[@mariusofearth2474]

Make A 2Stroke into A 4Stroke

[@kenjsr1]

That might be a bit more tricky without the proper machine tools

[@dirtbikesrawseome]

@@kenjsr1 but if anyone can do it he can I bet

[@PupuTheMonkey]

Technically, he could just return this one to it's original configuration.

[@hugolundmark5947]

he kinda did it with the compressor

[@thegenerousdegenerate9395]

@@hugolundmark5947 all he needed was a carb and an exhaust instead of the tank.

[@honkie247]

You should be very proud of what you have accomplished. Changing the size of the ports, and especially the shape of the ports at the top end would yield a lot more power and make a smoother running engine. But tomorrow is another day. Great job.

[@manuelpavan1647]

Veramente complimenti per l'impegno!! Non credevo possibile una modifica del genere con attrezzatura così rudimentale!!bravissimo!!

[@MrRada2000]

i nearly had a stroke when i saw he blocked the place where the chain for the valvetrain goes trough, then i remember im retarded and 2 strokes dont have a valvetrain lol

[@klausbrinck2137]

u mean, u "nearly had 2 strokes" ;-)

[@YosefMetal]

clout demon nice

[@CraigOlove]

You are Wrong take a look at a Detroit diesel 671 two stroke with exhaust valves all 71 92 plus other series all have valves.

[@MrRada2000]

@@CraigOlove the thing is 2 strokes dont need valves to run, they did it on those but those are big heavy engines, and also prob expensive at that time im guessing, they could have made them without valves, just look at any modern 2 stroke from 2000 to now, is there any other two stroked that uses valves?

[@gundorethemighty]

man your like my grandpa when he was still around that guy would make anything work . I mean it wasn't like nothing he couldn't do .

[@Demmidude]

That's an impressive triple negative you got there

[@austinmason1560]

That is actually insane dude awesome fabrication work you brought that motor back from the dead

[@pieterbezuidenhout2741]

Hats off to you young man. Never say NEVER.

[@KowboyUSA]

When we're stranded on a desert island - that happens to have a big junkyard for some reason - this is the fella we want to have with us.

[@stephenwalker928]

Hats off to you, you ordered an unavailable item from Amazon.. and actually got it.. that's impressive

[@jreererer8490]

Props for having so much patience

[@randallgrenier3582]

Unbelievable. Talk about young talent.

[@paulmccoy2908]

I wondered where you had been. I guess you were teaching yourself how to tig weld aluminum.

[@dumauvali1288]

Now transform a 2 stoke into a 4 stroke!

[@brennoncantrell5867]

Still amazes me that someone designed and built the engine in the first place.. I’ve taken apart smaller motors but dang that’s allot of parts lol 😆

[@rsmit2797]

I`m impressed! Now turn that 2 stroke into a Wankel!

[@ridebc153]

Thank god it wasn’t a 2 stroke into a 4 stroke that would scare me. We need more conversions like this.

[@davidosborne5057]

AWESOME!! Getting a TIG and learning to use it. This took a lot of time, effort, and money! Great job!!

[@OTNAYITPES]

You could break that seal on the crankshaft due to overheating if you weld the housing, at least it will last shorter,, try to weld small point first, pull the seal off, and then continue welding,,,

[@mrhighvoltage1990]

walang tatalo sa galing ng Pinoy... proud to be Pinoy..

[@aeroxdima7777]

"currently unavailable" * puts it into cart, arrives * Have connections to the Russian Mafia, people. It's gonna ease your everyday struggles

[@andreinfocb]

Um dos melhores videos de mecanica q ja vi no youtube! Simplesmente fez acontecer algo q eu achava impossivel de fezer, um motor 4T virar um 2T! Incrivel!, Tem meu respeito pro resto da vida!!!

[@Facewest]

You should get a film maker award for this masterpiece!!!

[@TheStoney07]

This is absolutly amazing! Awesome job!