License Plate Relocation Install *DIY* | 10th Gen Civic Hatchback

[@RevolveAuto]

Hope this video helps! *Tools needed:* License Plate Mounting Bracket: amzn.to/3ua8jeN ¼ x 1 ¼ flat washers (qty: 2) 3/16 x 3 toggle bolts (qty: 2) #10 flat washers (qty: 2) ½ x 0.257 x 1 nylon washers (qty: 2)

[@gavin_jdm9530]

This is a great alternative to using the PERRIN one for $100. Toggle Bolts work really good, I used them on my challenger in the past instead of drilling. Take my thumbs up 👍 Looking forward to more content!

[@RevolveAuto]

Thanks for the comment! I appreciate it :)

[@lolling2987]

Yes, it is way cheaper but might not hold up as good. I think the Perrin one is connected to the front tow hook. I'd trust that more.

[@gavin_jdm9530]

@@lolling2987 You need to drill holes for the Perrin one. That's the whole point of this way using toggle bolts. Hence the comment "I used them on my challenger in the past instead of drilling".

[@typerawrr7503]

I gotta do this to the R. This install video was really helpful thanks man

[@RevolveAuto]

Of course! Let me know how it turns out :)

[@typerawrr7503]

@@RevolveAuto I did it yesterday and it turned out great!

[@maishagrochowski5499]

Thanks for the video, They make BumperPlugs that color match the bumper for those holes from where the license plate was 🤟🏼

[@RevolveAuto]

No problem, glad it helped 👍

[@adriangreen2554]

It’s old however where u get your license plate frame for relocating your plate.

[@nirajgohel5566]

Hi, the toggle bolts are not working for me - they get closed as soon as I tighten the screw hence it’s falling off and not holding up.. wondering what’s wrong?

[@franciscosaldivar6251]

I can’t seem to find any videos for the 21 sport hatch, it’s just a smooth surface where the fog lights are at so i don’t know how I can do this on my car , any tips?

[@RevolveAuto]

Hey man, thanks for checking out the video! With the 2020+ models, and the smooth fog light covers, the install would be a bit different. This video is pretty good, and should help you out! Cheers👊 kzbin.info/www/bejne/qpmXYaKHgaiBoJY

[@franciscosaldivar6251]

@@RevolveAuto you’re the best ! I appreciate it!

[@GeraldValdez14]

If I install this it will block out some of the light for my fog light?

[@genoramirez521]

What are the 2 long screws called? And what size do I need for them?

[@brndn8274]

Question, can you only do this on driver side or only on passenger side?

[@RevolveAuto]

It’s the passenger side vent which has small openings for the horn. So you could do it on the driver side as well you would just need to dremmel out a little opening

[@lolling2987]

Still holding up fine?

[@RevolveAuto]

Yes! I've checked a couple of times and its stuck on there lol