Lifetime Procourt™ Basketball System | Lifetime Assembly

[@ollie_215]

Thank you for the visual representation it was most useful and appreciated

[@aaronbluewilliams4692]

What about the backboard combo with universal mounting kit

[@lilymeadows2994]

Thanks.

[@joycewu4646]

Thank you so much.

[@inkandgrowrich9793]

I'm stuck at step 2.5. The bolt (DXZ) and nut (BTS) wont fit into the holes at the end of the two little arms. The bolt will fit in but only up to the point where it becomes thicker . I'm sure I've got the arms in the correct place. Any ideas?

[@LifetimeProductsAssembly]

One thing you could try is using the threads on the bolt to ream out the excess powder coating in the hole. If that doesn't work, please contact our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at [e-mail]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

[@maiLnosraC]

Missing parts in the box Meant I couldn’t complete assembly this evening. Christmas Eve my son won’t have it for Christmas Day. Disappointing.

[@zaimation2737]

How high can the hoop get?

[@LifetimeProductsAssembly]

This hoop can be adjusted to 7.5' - 10'.

[@christianlamb]

Did you say how to assemble it to be at 10 ft regulation height? I missed it. 😪

[@LifetimeProductsAssembly]

Once fully assembled your system should be 10’ when you adjust it. You can use this video to help you adjust the basketball hoop. kzbin.infoUgkxOsvzJLBOAbxTlf_4Bz9gWYsiYof1HnRA

[@kenthuth5020]

6th hole down. You can't just adjust and crank upwards/downwards. Need to actually unbolt the assembly, reset, then rebolt. Incredibly inefficient and made even harder when the screw you get isn't milled correctly and doesn't even thread into the bolt. At least hardware store is close by to get a replacement screw. Ditched the knob since it's completely illogical for that part to even exist - very difficult to thread the screw through the knob with nothing to grip the screw. That being said, this is an excellent video and very informative. Extremely straightforward.

[@valis14]

@@kenthuth5020 Very similar hassle situation with our assembly. It looks easy to adjust, yet once you unbolt the assembly and rebolt, the screw is just a little off, making it that much more difficult the next time. Because of that slight warp, the screw gets jammed, doesn't sit flush, goes in at a wonky angle. After much torque-driven hemming and hawing with the screw that I was worried was becoming stripped in the process, I used some WD-40 helped ease it once more to finally stay firm -- though not without a lot of trepidation on the sturdiness of it. With luck, it will hold up the way it's supposed to but you better believe I won't ever try and adjust the height of this rim ever again. This whole palaver could've been avoided if in this video (or the instruction manual(, he mentioned the DIFFERENT HEIGHTS with each hole. In the vid, he puts it on the 3rd bolt with no explanation and the rim is not regulation height, when it would've been easy to call them out w/the graphic next to each and would've saved us lots of time.

[@Lip_Gallagher]

My long axle doesn’t fit into the bottom hole of the bottom hole. What do I do?

[@LifetimeProductsAssembly]

Hmm.. That shouldn't be the case. Give our customer service team a call and we can trouble shoot the issue with you and see if we can help figure out what's happening. They can be reached at 800-225-3865 or by email at [e-mail]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

[@Lip_Gallagher]

@@LifetimeProductsAssembly white lithium grease did the trick

[@donaldjoy4023]

My model number isn't even remotely similar, what am I supposed to do? It is the Procourt system but completely different model number, 90040

[@LifetimeProductsAssembly]

This video is for model number 1269. For an assembly video is 90040 you can scan the QR code found in the instruction manual that will direct you to a BUILT app to see a 3D video of the assembly.

[@donaldjoy4023]

@@LifetimeProductsAssembly I figured that out yesterday, but thanks.

[@Gunnmn]

How long is the bod

[@NYsMascot]

W vid. the instructions it came with were horrible and didn't help at all. Ty

[@Lip_Gallagher]

You say don’t move the base until it’s filled with sand then the very next step (3.2) the base is flipped around. Do I put the sand in before step 3.2 ??

[@LifetimeProductsAssembly]

You don't fill the base until the end of the assembly, step 4.2. You can move the hoop, but we were saying not to stand the hoop up until the base is full, to prevent any injury or damage.