LL4D Tippmann Tmc/Mission 4 - Testing the TechT valve spring, drive spring and lightened hammer.

[@klproduction1045]

Thanks for your work Sean !!!! I’m building a stormer elite thanks to you and rune rebel

[@lesslethalfordummies]

Very cool. These are great markers.

[@klproduction1045]

@@lesslethalfordummies I agree

[@thellc24-7]

Nice test! There are so many part options for this marker. Do me a favor, aim for the box on top of the trap, will ya🤣🤣🤣💥💥💥

[@lesslethalfordummies]

There are a fair share of bits for this marker. It would seem drive spring and valve spring are the most cost effective. Hey hey hey 👀 down! 😂

[@michaelgideon8944]

I think the light hammers were designed for full auto cycling, not velocity increases. They are paintball parts so they are designed to be used under 300. The delrin bolt was independently tested 15 or 20 years ago and they helped. The power tubes didn't matter.

[@lesslethalfordummies]

The lighter bolt i agree is more a paintball part trying to increase efficiency. The heavy stock hammer does LL best.

[@rustystyle]

Fair play to you, you've been busy!! 😅 Sucks about the lightened hammer, but at least by doing your tests methodically you know exactly what helps. The drive springs seem to make the biggest difference I reckon.

[@lesslethalfordummies]

I do believe the drive spring is the ticket. Now the question is how stiff can i go? The TechT spring is a great option that works very well but i think i can do a little better.

[@jonathanburdett7102]

You need more volume if you are going to use a lightened hammer. You can do this by filing down part of the valve on the front, widening the channels, and by drilling 2 small holes on each side of the valve pin

[@lesslethalfordummies]

The TechT spring or hammer didnt cut it and i have since moved to my own spring setup.

[@klproduction1045]

I gave a shout out to you and rune rebel in my video

[@lesslethalfordummies]

Video you say…..ill have to check it out later when i get home thank you. Subscribed!

[@klproduction1045]

@@lesslethalfordummies No problem !!! Thank you

[@runerebel8441]

Great test. So the stock hammer/bolt works best. 348 fps is very good for this marker with a 12 gram CO2. Bet youget over 400 fps using an 88 gram CO2 😃

[@lesslethalfordummies]

Yes so far stock hammer did perform the best. I will be testing 90g co2 very soon. I think it should reach 30j. Thought i would toss 1100psi in it today for kicks.

[@runerebel8441]

Sounds cool. I tested the stormer today with the orginal barrel and detent. Velocity was only 300 fps. I will post 3 videos today. Stay tuned 😃@@lesslethalfordummies

[@lesslethalfordummies]

@@runerebel8441i got the day off today i could use some videos to watch. 🙂👍🏼