The hardbody is almost ready for the dyno just a few small things and we'll be making some power! Thank you to O&J Performance for supporting the channel! If you need ka parts be sure to check them out at www.ojperforma...
Пікірлер: 67
@seanholmes8290 Жыл бұрын
Got may stage 1 cam from OJ. Getting the truck back from the shop today. Had him instill the cam, upgraded ratcheting timing chain setup, adjustable cam sprocket, upgraded hydraulic lifters and header.
@LocalLosers520 Жыл бұрын
Hes a good dude. Anyone saving the single cam is a good dude in my book!
@iamherenow321 Жыл бұрын
Awesome stuff! Put a turbo on my 93 hardbody couple weeks ago definitely needed! Crazy how small single cam KA community is especially boosted ones!
@LocalLosers520 Жыл бұрын
Ka is gods motor
@adhippie218 ай бұрын
Hey my man, few questions if ya don’t mind me asking… first. I bought an arp main kit for the kade, thinking it was the same as the e, not the case, so how did you get the work around for that? Because I talked to an arp rep, and he said they don’t have a bolt kit for the single cam motor. Second, I don’t know the mileage you had on your rockers, but you obviously felt comfortable sending them to Omar to do the upgrade, my rockers/motor has 215,000 miles on them “ block currently torn down and at the machinist/mechanic being punched 40 over for the rebuild “…are my rockers too old/too many miles to send them in for the upgrade? In your opinion of course,.. and third, it looks like you’ve had this done for almost a year, how have the rockers handled the past 6 months? Any issues with the set screws or poor craftsmanship? Any info you feel to give me is greatly helpful and also greatly appreciated. Love what you’re doing for the hardbodys, the single ka-E ,drifting community, and the low life mini truckers that are still scraping around.
@nathanhilsmier6071 Жыл бұрын
Anticipating what your truck makes power wise on the dyno! been watching you build this truck forever man!
@corsairmotorwerks547 Жыл бұрын
Love it dude! Youre doing everything I want to do to mine! Dropping my trans tonight to replace the clutch. No performance mods to mine yet except emissions delete, exhaust and suspension. Cant wait to copy your turbo set up. Hope you dont mind.
@LocalLosers520 Жыл бұрын
I dont mind at all!
@dustintippins1660 Жыл бұрын
I’ve watched all your d21 videos over the weekend and got a lot of useful information. Thank you. I’m starting to build me a engine for my 93 4x4.
@LocalLosers520 Жыл бұрын
Glad to help.
@hardbody_Santiago96 Жыл бұрын
No more tickling noise 👍
@reecerawson9153 Жыл бұрын
hey mate i have a FWD 1990 Nissan Pintara here in Australia and ill be going with O&J Performance myself for everything inside, currently doing a turbo conversion
@LocalLosers520 Жыл бұрын
Thats super cool. Do you have an Instagram? I would love to see that.
@thecampinggamer4800 Жыл бұрын
Added these to my ka a few months ago, haven’t started it yet lol but should be here soon
@haggardautomotive Жыл бұрын
Looking forward to the dyno video.
@LocalLosers520 Жыл бұрын
Me too! 😏
@ShoshinMizu3 ай бұрын
god damn where do you find these i haven't been able to find them since this video came out
@LocalLosers5203 ай бұрын
www.ojperformance.com/
@badgermetal Жыл бұрын
I want these so bad but I don't have an extra set to send in for that core charge. Iv had a collapsed lifter for months now and it's very annoying. It collapsed at red line after a backfire. Pulled them out and couldnt tell which one it is because it only ticks past 2500 when it's hot.
@LocalLosers520 Жыл бұрын
That's how mine was. Go to a junk yard ka24e are all over the place.
@seanholmes8290 Жыл бұрын
I found upgraded lifters from Australia. They are the roller style anti pump up.
@VibingGeniusАй бұрын
You didnt have to pull your timing chain in order to remove the lifters?
@LocalLosers52027 күн бұрын
No sir!
@jonnyyael1511Күн бұрын
Hey man you think I can put a cam in my Nissan 95 2.4 stock and if I can what should I should to make sure the motor can handle it
@LocalLosers520Күн бұрын
You can definitely do a cam. Just talk to o&j performance
@turbokeij7 ай бұрын
What is the clearence btw the rocker arm and valve spring?
@LocalLosers5206 ай бұрын
Ill have to looks i dont remember.
@angelcorella1778 ай бұрын
You do awesome work on your d21 where are you from if you don't mind me asking.
@LocalLosers5208 ай бұрын
Sierra vista az
@leonjohnsonjr33314 ай бұрын
Hello sir i got a 94 Nissan single cab 2.4l 4cyclinder and the engine is tappin can u tell whats the problem
@LocalLosers5204 ай бұрын
It's probably timing chain or lifters.
@Bendover-wd3zk9 ай бұрын
To bad those rockers are now out of stock on the website
@LocalLosers5209 ай бұрын
Just reach out to him. They are made to order.
@Aldama5523 Жыл бұрын
How do you like the stage 2 cam? I assume the stage 3 cam is more aggressive? Which do you think is better for the street? Stage 2 or 3?
@LocalLosers520 Жыл бұрын
Stage 2 is fine. I have never seen a stage 3 so i couldn't tell you what its like.
@colapone18957 ай бұрын
looking at doing the stage 2 cam, is it drop in or would it be better to get the lifters with it?
@joshuacollett7618 ай бұрын
Would I have to customize anything to drop a 240sx ka24e in my hardbody
@LocalLosers5208 ай бұрын
Yes we have a video on that
@joshuacollett7618 ай бұрын
Ok thanks
@joshuacollett7618 ай бұрын
How much would you charge me to do mine
@masian29 Жыл бұрын
any guidelines on have a stage 1 came i have a stock ka24e with 151k just did egr delete and looking to to the simple turbo setup soon?
@LocalLosers520 Жыл бұрын
I wouldn't recommend it. Just go with stage 2 or 3.
@sebastianb5997 Жыл бұрын
I’m having trouble finding a throttle body for my 240sx intake manifold swap, saw you had a different type of throttle body in there could you elaborate what it is or where you got it from? Would greatly appreciate it!
@LocalLosers520 Жыл бұрын
Its from Amazon its just a universal one. Ill look for the link
@LocalLosers520 Жыл бұрын
RSSTRIIEN 70MM Universal High Flow Aluminum Billet CNC Throttle Body For 2.75" Inch Intake Manifold Black a.co/d/3QPNPv1
@sebastianb5997 Жыл бұрын
@@LocalLosers520 for sure sounds good thank you! Can’t find absolutely any throttle bodies that work unfortunately
@codynewton2572 Жыл бұрын
To run a 240 intake do you have to delete power steering?
@LocalLosers520 Жыл бұрын
No sir
@ncfishkiller Жыл бұрын
Hey does Josh still make the rear disc kit? I don't have Instagram and can't find him on ebay
@LocalLosers520 Жыл бұрын
Jason does. But hes only doing them through Instagram right now.
@lilmancc35 Жыл бұрын
Ive got to build my hard body. Lol. And after seeing the safc tuners, i want to go deep. Lol.
@LocalLosers520 Жыл бұрын
Tbh i would stay away from the safc. There are way better options out there.
@lilmancc35 Жыл бұрын
@@LocalLosers520 ok. I watched your video and thought it was cool, but i guess that brings me to option 2, the mega squirt standalone.
@LocalLosers520 Жыл бұрын
The megasqurt is a much better option, but i haven't used one, so i can't say too much about them.
@lilmancc35 Жыл бұрын
@@LocalLosers520 yeah. They seem like a way better set up. All i know for now is its mainly for boost control. I plant to completely over haul the engine to oem or slightly better, and add a turbo. Nothing to serious i think.
@gc2353 Жыл бұрын
What size injectors
@LocalLosers520 Жыл бұрын
id1050x at the moment.
@777smitty4 Жыл бұрын
I didn’t see a bad one did you find it or did I miss it
@LocalLosers520 Жыл бұрын
I didn't find one.
@LocalLosers520 Жыл бұрын
It only happened at high rpm with motor hot.
@zeronicotine Жыл бұрын
bro where do i buy the stickers, u also didnt put ur friend who makes them insta in the desc lol
@LocalLosers520 Жыл бұрын
Locallosersaz@gmail.com I know i didnt my wife said the same thing lol. Im too lazy to tag him in every video i put that in.
@TransAmTom1 Жыл бұрын
Damn, that’s a nice WS6 in the background there!
@alexromano621 Жыл бұрын
11:39 lmao
@LocalLosers520 Жыл бұрын
Im not used to things being that tight! 🤣🤣
@jacintofaisao73619 ай бұрын
I’ve been trying to find mechanical lifters for my 93 d21. O&j been out of stock n they don’t sell em anywhere else 🥲