GM Silverado Upfitter Switch Kit 2019 - 2022 Trucks [AMAZING]

[@nickdar100]

The 5th switch is for a lightbar/beacon on the roof. My 2020 has the factory wiring harness above the headliner,behind the 3rd brake light.

[@harrymarsh8477]

The wire comes from the big connector (that plugs in behind the ebrake switch), green with red trace. Before I installed everything I put female lugs on the 4 AUX wires and spliced in a green wire to the lightbar/beacon wire so I can connect loads to all 5 AUX switches at the switch box unit. 😎 Aside: I think it SUCKS that GM wouldn't install this box when Upfitter switches are a factory option (as it was on my 2022 Chev 2500) 😡

[@colehumrichouser5211]

That ocean color in the interior just completely ties the whole truck together that a lot of truck builder forget/ leave out when building a truck! Keep this awesome grind up man!! Can't wait for the garage build to start!!

[@RichardNye-f6r]

I just got one of these kits for my truck and REALLY appreciate the detailed description on disassembly and what to watch out for. THANK YOU!

[@man-a9857]

I don’t even own a truck like this and I enjoyed this video. I appreciate detailed videos cause so many people don’t say enough! Love the carbon fiber wrapped trim too😮‍💨

[@cjewels1703]

I added upfitter switches to my trailboss before I even added my off-road lights. Lol. The Aux 5 wire ends by the third break light. It’s for the roof beacon but under the dash it should be the light green and dark green striped wire going from the upfitter fusebox into the grey connector, at least it is on mine. You can depin it from that connector or just put a T-tap right there if you need the 5th aux

[@kodiklemann8934]

Switch number 2 would be a good switch for a train horn compressor! Trust me, you won’t know how you ever lived without it.

[@dpranke41]

Rough country has a wireless option as well. I had the switch wired in before I found it. I use it for my light bar. Gives the strobe option as well. Has a nice key fob.

[@rdgoalwin]

Per your question, I love this level of detail that you documented for the project. Gives me the security to know I am not stumbling into the abyss when I install similar items and also...it's downright interesting. Love your videos. Thank you!

[@austink4712]

Im glad to see that at the very least, most of the clips are made with metal, rather than platic, like most cars have

[@jonluce905]

Perfect amount of detail. Keep doing what youre doing!

[@RAF-jb63]

Love the level of detail in your videos

[@JRandallEllis]

Of all the automobile related channels I subscribe to, yours has THE BEST music.

[@2EZSally]

Can’t wait for the new shop build!

[@erikdeboer7813]

Absolute life saver here. Thanks for the very detailed instructions!

[@ryanwilson964]

Don’t change how u do ur videos, they are perfect. Love the detail. Love the realness and again the detail bro. Legit! Let’s goooooooo

[@AaronNieves]

The ocean color accents on the interior look so good!

[@matthewholmes6428]

I want to do this upfitter to my truck but I had no idea I had to pull that much interior just to get it in. I love the carbon wrap looks fantastic. Very nice details.

[@daltonsmith425]

The Upfitter was on of the best updates to make. Next on your list, unless I am wrong and you have that option would be the HD Mirror. Super easy. Compared to the Upfitter install, the HD Mirror install is a cake walk. In my opinion everyone with a newer model Silverado should really look at it. With the Upfitter though, all kinds of different options.

[@jbossnack]

My 2022 2500HD came with this AUX button panel...now I'm getting ideas for things to connect...great video thank you

[@MikeyWayho]

Really like the carbon fiber and ocean color combo. Ocean color on bowtie on steering wheel would look good as well.

[@munchy8374]

5th is in the 3rd brake light thinking it for those yellow lights on top of work trucks...but i think it would look for led rack lights..

[@Zlover17]

Great video!! That popping noise from pulling the panel gets me every time lol

[@oliviad735]

Man that carbon w/ the ocean color looks SICK!!!

[@craigackerman9574]

Number 5 switch comes out in the third brake light.

[@poisonivy2380]

I believe aux5 is a green wire with a blue leader that is actually run above the headliner to the brake light above the rear window. It’s intended to be for a rooftop emergency light or other additional lighting on the roof of the truck

[@Jay-hp6pu]

Damn, these vids are on another level lately. Awesome editing man.

[@LonestarHawaiian]

Much appreciated! 🤙🏽

[@rook13pdx]

This video helped, I wouldn't have imagined I'd need to take half the dash apart but after having done it, there is something to be said for the dude that just cut the hole in his existing dash (very carefully) and stuck the switch in...

[@jakekeeling1092]

I really like the amount of detail that you did for the video. Thank you

[@devingallagher4454]

im glad i ordered my 2022 with this already installed

[@phillkenyon4378]

Always good videos dude! I'm fixing to install this on a 23' . Looks about the same. Dreading all the trim pieces I have to unclip. I may be rewatching this a few hundred times the next few days. Lol

[@1987apa]

I know this vid is old and all, but I just came across this channel and its amazing man. Truck is fire bro.

[@LonestarHawaiian]

Thanks for watching 🤙🏽🤙🏽

[@1987apa]

@@LonestarHawaiian aboslutely bro. Just got me a Silverado and i want to lift it up maybe a few inches, bigger wheels and all. Been watching a ton of vids on it. Also showed my bro how you wrapped the interior, i want to do it to mine also. Its a wood like but i want it black carbon.

[@joseofno]

5th one goes up by the third break light

[@Redfishdaddy]

That up-fitter switch is awesome. Great video. The carbon fiber looks amazing.

[@MRLUGNUTS]

Thank you for showing this mod, I put lights on the rear of my TrailBoss which is activitied when I put in reverse because I didn't want to cut or drill a hole in the dashboard. But now that you showed this, I've got to get it👍🏾

[@MrTimdtoolman1]

Nice upgrade Brother. You would greatly appreciate a kit with shrinkwrap and soldering iron tighten up your wire connecting game. Great video!

[@mochaleui7814]

That trail boss is a beast Hawaiian, mahalo nui and hana hou🤙🏽🤙🏽

[@aaronis]

Switch #2 Wheel Well ROCK LIGHTS👀

[@Silveradohindsight]

5 is routed behind the 3rd breaklight for emergency lights

[@kevinshuford8498]

Sweet addition, the details are awesome man. The more the better!

[@gerardoesparza8650]

The best rapper on you tube for sure…

[@gabel1106]

Great video. Perfect amount of detail

[@billaxberg6103]

Awesome look. Now you just need to update the gauge cluster.

[@tomsltz]

Your vids are great! I have a 21 TB midnight ed 6.2 and your content on these trucks is perfect! Thanks so much for sharing info.

[@jacknsaav]

Awesome job with the video and thanks for all the detail, it helps the rest of us "DIYers"

[@andrebassick4360]

Love the extra details. This is so very helpful as I am getting ready to add this to my truck. Thank you!!

[@douggarrett5288]

Give us a video tour of your shop set up sometime !

[@steventrudeau4955]

Love the content keep it up! Now i need to wrap my interior truck too 😄 Look very good!

[@LonestarHawaiian]

🤙🏽🤙🏽

[@Mondo_0ne]

Interior accent lighting? That ocean color would look really good and or stars in the headliner

[@questionmarkproductions766]

Great job on the install. I really enjoy your video. It’s hard work but you make it look fun.

[@keithskjold7848]

Nice work with the clips! I hate that stupid push button as well. I may go this route eventually, but putting a different switch in before. Keep the content coming buddy!

[@toddkaczmarek3800]

just a heads up switch number 5 runs to the third brake light to run a roof top caution light bar. or what ever you hook up to the wires that terminate there

[@usmcfiredog]

Great video. Do you have to tear apart the dash every time you want to add an activity?

[@LonestarHawaiian]

Nope. All the AUX wires are now ready to go 🔥

[@kirbyschneider4187]

Glad everything turned out ok!

[@fixitdanner]

I was just looking into doing the same thing to my truck. Thanks for the video!

[@jmoore7362]

Did this mod on my 2021. It is a great 1

[@samrivera4736]

Leave it to the gm engineers to make a 15 min task a whole tear down! Hopefully these new trucks dash don’t crack as easy as our 08s.

[@PSDGuru]

Can you explain how you hooked up the wires to the relay? For the life of me I’m stuck trying to wire my two light bars up 🤦🏻‍♂️

[@benmoore2734]

Possibly add some rock lights or undercarriage lighting to use the fifth switch for on your panel.

[@robfigueroa5457]

Great, I’ve been considering doing this for a while and now they’ll all be out of stock and prices are going to skyrocket lol. No lie, I was pretty excited to see this since I’ve been wanting to do it myself. Thanks for the video!

[@Filiku]

Very nice! You should've wrapped the wire under the hood in the carbon fiber too lol thanks for sharing

[@jeffhurley9291]

3m always the best 😁

[@andrewguseman4728]

@Lonestar Hawaiian Good morning! I finished my upfitter install yesterday thanks to your video. I also have the Rough Country grille LEDs and was wondering if you only attached the blue wire to blue wire and got it to work for switch # 1? What about the power wire on the battery and then the interior black and white wires from the LED lights? Did you just tape them up or connect them to something as well?

[@epeterson2448]

You did a great job but after watching this. No way I’m spending 6 hours tearing into my new 3500! For 90k It should have came with those to begin with. And I’d prefer to have them by the garage door opener’s. All the garbage GM put under the steering wheel you almost have to come to a dead stop to find them safely! Dig the wrap also!! That’s probably something more in on my level if I screw it I can just start over again 🙏👍

[@FUIKO1963]

But if you use a oscillating multi tool and follow the dimensions on the hole for the switch you can do this on your existing trim piece. that's what I did and it was all done including wiring in about 1 hour.

[@gohangan]

@@FUIKO1963 I was going to dremel it, or is it a bad idea?

[@FUIKO1963]

@@gohangan no use a multitool and tape surface to draw a line where to cut

[@davemeisner9100]

@@FUIKO1963 Wondering if you bought the wiring harness separately also? I like your idea, there’s no way I would attempt to take everything apart …I’d have lots of broken stuff for sure!

[@FUIKO1963]

@@davemeisner9100 I bought the complete kit I don't think they sell it separate

[@chadgrieser8021]

Love your videos! i'm getting ideas for my tahoe i will someday get built by gm. In the video, you mention having room for activities with those extra aux buttons. Do you have any ideas on what those may entail? I was thinking you need a light bar along the roofline, and possibly some more lighting for around the sides or back for night time offroad activities?

[@gk9417]

That’s a lot of work To bad gm couldn’t make it easier ✌️🇨🇦

[@brianblevins6190]

Your TB is sick! Molding mine similar. Question: Did you tie in your fascia lights to the fogs? Could you wire the fascia lights to this as well? Here in VA they got some crazy rules with lights. Thanks man and keep up the great content on the TB. That truck looks so good!

[@LonestarHawaiian]

100% could wire up the facia lights to the upfitter switches. Would be an easy add now that it's installed.

[@livinthedreamohyeah4268]

I think you should upgrade that stereo/control unit. Good video though! Thank you!

[@LoneWolf1985BK]

I remember when the lower kick panel was the first thing that had to come off the dash. The good old days. Adding any electrical accessories now appears to be a pain in the dick if you have to disassemble have to truck to get under the dash to run wires.

[@Dmanger989]

I did the same install over the weekend on my 3500. I cheated though. I cut the pattern out of 1/8" plastic with my laser engraver. I taped it to the knee booster with two sided tape and used an ossilating cutter to cut the hole. All together it took me about 1-1/2 hours to install.

[@Jason-nd5fe]

Great video. Where did you put your relay and how did you wire up your grill lights?

[@pat14lang]

Everyone has their way of running wire through the firewall grommets. But i’ve always made a little puncture hole (using a pick or needle), you end up with a little better seal around the wire than you would with a slit. I’ve had slits tear open more than I have with a pin hole. But you’re rarely going to be in situations where water is going to get inside because of that i guess… IMO the switch panel little lights would look better if they matched the other lights

[@LonestarHawaiian]

I ended up just snipping a small slit in the grommet 🤙🏽 also why I needed some WD40 to get it in there 😅

[@DaRespect88]

I’m seriously enjoying your videos .. the whole bit about manly this manly that then my wife drives.. 😂😂😂

[@mdrao8263]

Sick Have you contemplated doing a wireless charger for your phone? That would be awesome

[@Zach-bc4vv]

This channel is living the dream for a truck guy. What's the first song track?

[@chuckken3438]

Dude, you could have just used the new knee bolster as a stencil like I did to cut the hole in the original bolster...this is what I did...I didn't need to take any of those panels off!....I even squeezed the 2 screws in for the fuse box without taking that bolster off all the way...the whole job took me 45 minutes...and it looks just as good as yours.

[@DapperX04]

Nicely done Sir !

[@garymccarver5006]

Glad to see you add some color accents. All this blacking out everything is getting boring, it makes the truck look like a base model. Especially black wheels.

[@maninmotion8090]

I love the ending...."Daddy has to sell this now so you can have Christmas". LOL priceless.

[@chargerman165]

Thanks. I have learned so much from you watching your videos so a big thanks. No not too much info as matter of fact a ‘do-it-your-seller’ idiot like me would attempt that on my 2020 Z-71 RST which also happens to be black and which I absolutely love. Mine came from factory with all badging blacked out except for the Z-71. I have learned that if one takes one’s time and follows directions one can do a lot of things to one’s vehicle. I like the fact that you are OCD like me and things have to match up. Oh and that other car that went by you with the colored lights on, I used to drive one of those. Now drive one without the strips as I now work in administration. Love you truck and most all the things you have done to it. Oh by the way one of the hardest things I did to my truck was change out the license plate lights to LED bulbs. I have medium size hands and it was very tight space. Almost got my hand caught. NOT SILLY TO BE EXCITED ABOUT A SWITCH.

[@JowieC]

I appreciate the more detailed videos. Awesome that GM makes that for the newer trucks. I don't think they do for my 2018.

[@midget_cannon8517]

They make upfitter switches for the 14-18’s

[@JowieC]

@@midget_cannon8517 Yea, but I thought those are only for lower trim trucks. Mine is a LTZ Z71 Midnight Edition.

[@midget_cannon8517]

@@JowieC it just depends how man switches you have. My LTZ only has 3 factory switches so I can put in 4 aux switches. If you have 5 switches you can still put in 2 aux switches

[@WeGoOutdoors]

Nice bud! How many Amps is each switch rated for? And where did you get those blue trim removal tools? Are any of those switches constant power? In other words they will work with the truck off. I think I’m fords there is only one factory switch (#6) that has constant power. So you can use switch #6 with the truck off but you obviously have to toggle the switch on. The other switches the key has to be in the on position for them to have power. Hope that makes sense. Was just curious for this kit cause I can’t seem to find that info anywhere. I’m wanting to wire my 30amp transfer tank fuel pump for that factory look. Plus, by having the switch you can turn off power to the pump so people can’t steal your fuel!

[@coltinhoepfner9318]

Great video. I actually ended up paying someone to do this for me. The only problem I have now is that my horn does not go off after locking it. Did you happen to run into this same problem? Thanks for the content!

[@Theflyriver]

Nice job...looks awesome!

[@smokin_keto]

Truck is looking badass! 🤙🏽🤙🏽

[@charlesprovance570]

You should ocean blue the bowtie on the steering wheel too...just a thought 🤷‍♂️

[@zacharyyates6443]

#5 goes to 3rd brake light

[@chadwickcarter]

One of those buttons could be for your Power Steps. Could the center console buttons be used that are not currently in use?

[@chrisheisserer-buschskenne2978]

I'm pretty sure the aux switches add anywhere between 5 and 10 hp as well.

[@LonestarHawaiian]

I was told 10-15… gains are gains.

[@victorsmith4623]

You should wrap your "Oh S*** Handles" in that Ocean color.

[@jayburris6252]

Looks good.

[@brandondollar689]

Know how you like to go over board. The little silver in the parking brake would look cherry in the ocean... Jus sayin...🤣🤙🏽

[@DetroitMikeVids]

Nice job! Did you wrap the steering wheel pieces while still in place?

[@johnbrutto9458]

You should look at s pods have one in my 2009 chevy only one wie goes in truck every thing else stays under hood check them out.

[@frybreadhd3045]

I made a comment about this a few weeks ago. Thanks 👍

[@IbbySS.]

New vid on a Monday? Let’s gooooo!

[@jimbugs12]

I COULD BE TOTALLY WRONG ABOUT THIS: changing the frame rate on your camera could stop the flashing appearance on the trucks leds when filming

[@RedCapMan]

Looks great, nice job

[@Porsche951]

Really want these switches but don’t want to tear the whole dash apart. Could you order just the switches and wiring harness and cut a hole in the existing dash? Or just take the switches out of the new dash piece and cut the hole in existing dash without taking it out of the truck.

[@martinquintana5837]

Awesome video Chad. I just enjoy all the mods you do. So detailed oriented with a like you said a manly touch. I'm loving the carbon fiber touch. GM needs to hire you as designer for sure, sales would be off the charts. Anyways stay safe out there and have a blessed day. Aloha from Kansas P.S. any updates on your dad's truck?

[@LonestarHawaiian]

GM - hit me up! 😄. Dads truck is coming along. Headers are being a pain at the moment but I’ll be doing a video on that in the next few weeks 🤙🏽

[@B0G3S]

Has this guy ever took this thing off road or what’s the trick lighting and cheap power adders for