Low CG, Belly Dragger ultimate comp rc crawler overview

Low center of gravity scale trail rock comp crawlers. Modified Class 1 and Class 2 vehicles with impressive climbing and sidehilling performance with carbon chassis, transmission, bumpers, servo mount, transfer Buy it links: ⁃ SCX10 iii builder’s kit -snp.link/ab5dc96d
⁃ (2) AR44 universal axle - snp.link/d2ac68b4
⁃ Body mounts - snp.link/fc214079
⁃ WB driveshaft set (cutting is needed to get the correct length) - snp.link/0b11c563
*The SCX10 ii builder’s kit is not needed as the only remaining items from it were the driveshaft and body mounts that were used.
Ottsix tires - snp.link/72fcd27d
⁃ (2) Voodoo KLR 1.9/4.7 tires (red)
⁃ (2) 1.9 Halo WebWrap Foams (blue/red)
⁃ (2) 90mm Voodoo Scale shocks (42.5wt oil)
⁃ No slop shims
Robinson Racing Pinion - snp.link/3ed50486
⁃ 32p pinion gear 13T
Team KNK hardware - snp.link/f1a5e816
⁃ SCX10 ii stainless hardware kit
⁃ (4) 3x6 aluminium spacers (for shock mounting)
⁃ Aluminum body mounts (not installed yet)
⁃ * Consider buying bulk screws for future builds
Vanquish - snp.link/567df28b
⁃ (2) VP SLW 350 wheel hub
⁃ (2) Incision AR44 axle gear 30T/8T
SSD RC - snp.link/5f2556eb
⁃ Pro aluminum knuckles
⁃ Pro aluminum c hubs
⁃ Pro44 rear axle case
⁃ Pro44 HD metal diff cover (red)
⁃ Aluminum link mounts (black)
Proline Power Wagon - snp.link/734d5cc6
⁃ 1964 Dodge Power Wagon body
Tattu Battery - snp.link/075e056f
⁃ Tattu 11.1v 75c 3s 850mAH lipo w/XT60
gspeedchassis.com
⁃ GSPEED chassis TGH-V3 carbon rails
⁃ GSPEED chassis panhard mount
⁃ Team Garage Hack dual servo mount
hardcore-rc.ec...
⁃ 70mm chassis braces
⁃ GSPEED V3 links
⁃ SCX10 ii offset panhard link
salinasdesignc...
⁃ ODT V1 - Complete Transmission w/skid plate (35% OD / 60T Spur)
⁃ Rock Slider battery tray (30mm / angled on a diet)
⁃ 3D printed flat bed (power wagon fit)
www.teamgarage...
⁃ TGH DSM M1.5 spacers
www.3brothersr...
⁃ G13 direct power servo
⁃ 25T aluminum servo pinch-style horn
⁃ Yellowjacket 2000kv 14-pole non sensored brushless motor
⁃ 3s dual lipo no-solder servo and accessory connector - dual JST
www.beeftubes....
⁃ Beef Patties brass hex style
⁃ SCX10 ii / AR44 Beef Tubes - brass - splined
⁃ SCX10 ii diff cover brass
⁃ SCX10 ii lower link / shock mounts - brass
home.castlecre...
⁃ Mamba micro X - sensored
www.fasteddybe...
⁃ (2) AR44 axle sealed bearing kit
Tech Factory Racing (Facebook)
⁃ 1.9 beadlock Carbon wheels
www.homedepot.com
⁃ Velcro Brand (extreme outdoor strip)
*If you do have the kit most items will transfer over to a GSPEED packaged deal that is offered. The only items needed in addition are the servo mount, servo mount spacer, panhard mount, electronic sliders, hardwareAmainhobbies parts - snp.link/a2827c5a
Castle Creations ESC and motors - snp.link/32e931ae
G-Speed LCG Chassis - gspeedchassis....
3 Brothers Racing - snp.link/09d54891
Holmes Hobbies - snp.link/3266cf93
Hardcore RC high clearance links - hardcore-rc.ec...
Salinas Design components - salinasdesignc...
Beeftubes Brass - www.beeftubes....
Team Garage Hack motor mounts - www.teamgarage...
Tech Factory Racing carbon wheels - / techfactoryracing
Bentmetal custom bumpers and body mounts - / bentmetal-798536523527216
Team KNK hardware - teamknkhardwar...
Our local hobby shop, JJ Customs - www.jjcustomsl...
Buy your kits and upgrade parts from this Amainhobbies link to support RC Review: snp.link/6640d084
Join the RC Review Facebook Group here: / 302319827122846 for early videos and extra footage.

[@montesamapping]

Some months ago I take a cheap chassis and a cheap very little and narrow bodyshell.. I got the best Crawler in our garage ! It was so better than Axial and Traxxas to get the name of "The King". From then to now all the interesting job for us has been to make each Crawler get performance the most similar to "The King". This has made a great growth of performance for all our vehicles. ...in the end our "King" is quite similar to the vehicle in you video (except our is really cheap!) One of the simple teachings is that the main obstacle to crawling performance is the body shell !!

[@SpeedyTube83]

yep! I am awaiting a new RTR gatekeeper, gonna pull the cage off and sell, slamthe frame low and redo susp geometry, and get the powerwagon cab on it. I'm pulling any weight off the rear and top and get brass on the front! should be fun. I always wanted a low CG rig like this, but like your "king"....budget!

[@MrsRabbit8]

These are really just a logical design eventuality. Ultimately it comes down to a balance between scale and performance, and that's the magic of preference, and personalization.

[@bryanshull7976]

Bellydraggers the low down crawlers.sweet set up.🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢🐢

[@JamminJim42]

It would be very cool to see a full build of one of the lcg crawlers. I think one of the most confusing things with these is knowing what parts to get for a complete rig. Obviously the electronics are easy to figure out, plus the tires etc. I dont think you could just buy the chassis then take an scxii or iii and take the rest of the parts off of it to complete the lcg unit. In order to get the best performance you need to get the right parts. Thanks for this video and I hope you do many more on this type of crawler.

[@Gurpreetsingh-dz1ct]

JamminJim42 that quite possible for scx10.2 , with very little mods

[@danielkonrad1444]

Yes that would be a interesting video.

[@lancevalente8269]

So this chassis would be a direct swap from a SCX10ii... With very little mods all the components from a scx 10ii will swap over rather easy...

[@JamminJim42]

@@lancevalente8269 Have you done the swap? I looked closely at the transmission and it is quite different than the stock one.

[@ragsixracing]

I didn't know these rigs existed. This is right up my alley tho. Ty for showing the basic blueprint of how the parts work together in these rigs.

[@rcvurooom8837]

Always willing to help. I was always asking questions and the community on the GSPEED FB page helped out a lot

[@kravenkrawlhobby5438]

Been building one, just get to picky about things and progress is slow. This show is the reason I started to build one.

[@rcvurooom8837]

That’s rad. Custom builds do take time, but it doesn’t stop after you’re done. Have fun with it

[@kravenkrawlhobby5438]

rc VUrooom thanks brother, my wife finally understands that there’s no end to this hobby. LOL

[@bluesimon13ify]

The green truck was amazing, I cant believe it got over the hills the way it did, fantastic,😀😀😀

[@andrewupsidedown]

Just built the Gspeed v3 beautiful green carbon on Capra axles and a dropped and chopped rc4wd hardbody. all that is left is the reefs servo that's in the mail and put wheels on it and hit the rocks. Also I'm on the east coast in western north Carolina and this build should be perfect for the location as well. Love the videos and all the amazing builds you showcase keep em coming and Happy trailing!!!!

[@Jjcustomsllc]

Great video 👌

[@Gurpreetsingh-dz1ct]

Gspeed for the win, Love my gspeed v3 Elevation changer 💪🏻💪🏻💪🏻💪🏻

[@RCReviewChannel]

I couldn't remember the brand 'gspeed' on video. I kept saying 'lcg'. Oops.

[@grski900000000000000]

This is one of the best vids in quite some time Francis , would like to see a more in depth breakdown or maybe even a build of one of these LCG belly scrapers 👍🏻

[@rcvurooom8837]

I hope you were able to get information from the latest video

[@wikyWargaming]

Carbon fiber was all sold out, so I ordered myself an aluminum setup. Love me some variety in my crawlers, thanks for showing us!

[@rcvurooom8837]

Glad you enjoyed it. This whole covid got things held up here and there, but do check the GSPEED FB page and channel for updates. Good luck with the build

[@OswaldBeef]

Belly dragging "cheater rigs"....clap clap clap well done. Way to help bring the discussion back to balance. So much hate up top on the portals......but it should go down both ways. Thank you.

[@RCReviewChannel]

Yes, options are cool. We love em all.

[@randallbatson611]

Great informative video and your personality always shines on camra GSPEED #1

[@brucegibbs8376]

Would also like to see a complete build. Awesome stuff guys keep it up.

[@peregrineflow7354]

WOW WHAT A PLATFORM. Freudian caps, I must mean it. I'm amazed by the crawling footage. Clinging is more like it. Your channel is unmatched in the hobby! And then, you mention a place that is just magical for me: 2:11 8:42 and Moab too. Inspiring. I have only a toe in the water. A 1/18 Gelande II. I love it. "1/18" scale has it's advantages but I would love to go upscale. Thanks for the links! Thanks for the knowledge and energy!

[@redpot6684]

Yes please! More content like this please!

[@davidbanaszak562]

That is a Gspeed chassis. G-speed is also responsible for the design collaboration with John Holmes for the chassis made by Team Garage Hack -TGH. I myself have a build in the works using their parts. I am glad to see coverage of this part of the hobby. Please do a chassis comparison using a set if control parts and making the only variable the comp chassis. I myaelf would like to know how G-speed, Team Garage Hack TGH-HH, Spare Time Hobbies W1v1, and Brazin Scale all time low chassis' compete against a fixed set of parts. In your crawlwr comp course. Thank you

[@RCReviewChannel]

For sure, thank you. Couldn't get the brand name out on video but yes, G-speed. Our crew hangs out with Gabe and they do impressive things.

[@BigSungHobbies]

I am waiting on parts to finish building up my gspeed v3...can't wait ;)

[@rcvurooom8837]

I’ve broken down this rig several times. Always searching for that harmonious balance

[@Firewlkre]

Leave it to the Caly peeps to come up with a "Lowrider" rock crawler.Frame reminds me of the old MOA's.I'll probably wait for the Vanquish version.Seriously though great inovation and who knows maybe we'll all be doin the limbo this time next year.Thanks for a look at whats"happening".

[@Mtbmi]

I comp weekly with some belly draggers and also have one, I would say a vanquish rig will stick with them no problem

[@00godlovesus]

TGH Colorado:) it's a Class 2 comp rig it only weighs around 6 pounds so it's very predictable;) I've had a Gspeed chassis for the past year excellent

[@jla1137]

Very interesting the video did not know that there were these possibilities to build these machines so effective, Gracias amigo, for the information.

[@RCReviewChannel]

You are very welcome. Really cool the many directions crawlers can go.

[@willgerdesrc3687]

Just built a axial raw builder's kit but only used the frame mounted up to all metal and brass axles with the same proline 46power wagon but I dovetailed the bed and add a headache rack and boom to build my belly dagger wrecker I think my body is even shorter if not exactly the same it's a beast nothing compares!

[@dillonbesky6196]

Sweet rig great articulation

[@RCReviewChannel]

CG and articulation!

[@astridsactionrc545]

Lcg is what you want in crawling. They’re not cheating! 🤣😂

[@RCReviewChannel]

When on of our crew shows up with these on our trail crawler sessions, It is a beatdown.

[@rcvurooom8837]

We joke about that term a lot. Fun and games. Haha

[@rcpete7055]

I really want to see more on rc belly draggers.. I am building my first with a scx10 ii and a power wagon body.. I really enjoy customising bodies..

[@Spooky21740]

Could you pretty please do a servo battle with the Holmes V3 vs the 3 Brothers G13?

[@timwilliams9865]

Very cool rigs

[@pauls1816]

Definitely looking into that salinas trans

[@RCReviewChannel]

Very good so far

[@rcvurooom8837]

Great choice for a center trans or TGH for forward mount. I love both

[@jdsrcs8061]

Great vid. I have seen a few on the trails and they are like spiders.

[@RCReviewChannel]

They act like spider but they don't look like them, which is cool.

[@danweiss4928]

This is a really interesting video and I can see more more people building low profile rock crawlers. The information very useful. Great video thanks

[@KTMcaptain]

Surprised you didn’t mention Holmes hobbies. They have a cf chassis with team garage hack, also have a bunch of out runners and small brush(ed/less) for whatever you need, tiny esc, a direct power servo, and JRH has his custom comp Capra build on the KZbins.

[@corabbring8198]

Great performance and they look prettig good.

[@palaone]

You should come to Guam 🇬🇺! Trail with us out here. We have awesome back yard engineers that put out some awesome LCG rigs.

[@ametykathy]

I love gspeed chassis 💪🔥🔥

[@RCReviewChannel]

Impressive stuff here on our local lines.

[@ametykathy]

@@RCReviewChannel yess.. check my channel i have videos of my gspeed v2 and v3 and v3 carbon. Works amazing. I use mamba micro x esc and holmes hobbies stubby 2700kv.

[@RCReviewChannel]

@@ametykathy Will do.

[@amirsharkawi9311]

Hi I wanted to know how much the vehicle costs and if you have a website to buy from

[@amirsharkawi9311]

Hi I wanted to know how much the vehicle costs and if you have a website to buy from

[@thotho7869]

Great video, any chance to get a more in depth on about actually building one like the green? Think many would be interested

[@lancevalente8269]

Are you on Facebook?... We have a few groups you can follow that can help guide you to a parts list...

[@robbrcnstuff4220]

Cool rig!

[@billderas3420]

FC. Great topic and explanations. More, more, more... Thanks!

[@RCReviewChannel]

Maybe. This is like a black hole and i still have a day job. :)

[@nunocarneiro464]

You guys are really lucky with the amount of companies making aftermarket parts for rc, over here we can hardly find replacement parts, to get something it has to come from China, trying to buy from the US we almost pay more for shipping than what the part costs

[@anotheryoutuber_]

i run a wraith spawn with both my upper and lower links front and back extended .75 inches and have moved the shock mounts up .25 inches its amazing running 2.2s. lcog is the way unless you don't like replacing sacrificial plastic sliders.

[@jmcfly42]

I’m very interested with does crawlers! Very nice type of vehicle!

[@RCReviewChannel]

No holds barred performance

[@White000Crow]

This is the route I’m going with my E10.

[@pmipjv]

Nice crawls.

[@Pablosan7]

Awsome!! I wanna get into this low cg, thank you!:)

[@rcvurooom8837]

Sweet. I never thought I’d get into it, but it’s so much fun. Check out the GSPEED FB page of you have questions

[@locorc9989]

Thanks for the great video. Never seen these before, very interested. I'd like to see a fully Trx-4 Sport modded and these take on the same lines. Great video and great content as usual, your channel got me into crawlers and I'm never looking back 😎😎😎

[@ConditionZero76]

He already mentioned in the video his fully modded Trx4 sport doesnt have a chance, even his modded Vanquish cant run side by side with it 👍🏼

[@alexhardwick2855]

Awesome rig really want to see another vid of it and could an axial chassis be turned into a low centre of gravity rig like this ?

[@rcvurooom8837]

You can try to, but I have never tried. I just plunged into the rails. It was an easier way to go for me. gspeedchassis.com

[@zonegamma8197]

very cool trucks !

[@Hoscra]

Thanks! Very interesting!

[@CarminesRCTipsandTricks]

My budget definitely doesn't allow for boutique RC Vehicles like these... But they SURE ARE impressive!!! 😎👌

[@lancevalente8269]

Well if you have a Axial SCX10II and are looking to make it better this chassis is a direct swap...

[@rcvurooom8837]

The rails do come in a package deal. You can always swap parts when you break or decide to upgrade. See the GSPEED FB page for support. gspeedchassis.com

[@kevinbolden8780]

love that motor hum, great rig

[@willgerdesrc3687]

Love your channel and videos very helpful

[@drummerdad80]

My favorite is my rc4wd bully 2 it's unstoppable

[@PeterKornum]

Abu chance for a complet shopping list on the White/green truck! I NEEED THAT IN MY LIFE!

[@lancevalente8269]

Can get you started with the chassis gspeedchassis.com/

[@lancevalente8269]

Do you have a Facebook... We have a gspeed group on there...

[@fishngolfer2792]

Me too, that truck is awesome looking!

[@jeremyvarnum1343]

Thank you!

[@texasillest467]

Those are awesome

[@OswaldBeef]

I run 4mm plugs in my trx4 gts shocks....love it

[@discusdog]

I'm kinda half way there. pretty much full droop setup on all my rigs I do a lot of climbing on rock similar to that pointy stuff. But on a mountain side. What I lose in ground clearance I make up in being able to get it in positions it would tip during weight transfer before.and much more stable when it gets steep.

[@RCReviewChannel]

very nice. Go all in!

[@thomasgross8289]

How do you think a lcg rig in every other way but with portals perform you think?

[@rcvurooom8837]

Portals work great too. If you want some more feedback, check out the GSPEED FB page

[@discusdog]

@@thomasgross8289 best of both worlds really

[@drybonesrattlingrc6871]

I have 4 box kits from the major players 3 I built 4th is the Gen 8 AXE. I do like them. I want a quote cheater rig would love to build one, not sure I have the knowledge to pull it off. Be great to see a how to build series from start to finish. Another great video keep it up !!

[@rocksniper7206]

Awesome video! GSpeed Chassis for the win!!

[@RCReviewChannel]

You know it!

[@tiduspernicano5852]

Axial scx10ii deadbolt vs Redcat gen8 which one is better?

[@petroskaramichalakos5891]

Great 👍 videos!!!!

[@RCReviewChannel]

Thanks for the visit

[@marc9164]

Sacramento. Love my V3

[@rcadventures5940]

Is it just me, or do all HH esc have that loud whine to them? I've heard john say that it's just picked up worse on camera, but any video you watch sounds the same. Pretty undesirable even if it's "just on camera". Thanks for the awesome content Francis! I watch all your crawling vids man. Keep up the good work! Atascadero is sorta far. Anyone as cool doing 1/10 crawling down in the San Diego area?

[@vinhky657]

sd scalers!

[@jspeedrc]

Cool vidéo my bro

[@dominiqueleblanc2193]

You should do a low cg build!

[@fishngolfer2792]

I really like the look of that truck. Awesome! What body is the green and white one? Is it the pro-line 1946 power wagon without the fenders and bed?

[@rcvurooom8837]

Thanks. Correct

[@Heryariska]

Nice dude

[@iceking2685]

also be safe and great vids

[@masterchief586]

That place looks like a lot of crawling fun. Where is this crawling heaven located rc brother?

[@BGnation573]

What transmission is in the green one looked really nice ....... never mind I found it lol

[@rcvurooom8837]

It’s a salinas concept designs. 35% OD

[@flavorfave2601]

Really very technical rig that speaks performance, I've been following your videos for quite sometime now and this video showed me the rig I want to build, what's the name of chassis again for the class 2 rig? Where could I purchase the chassis? Thanks more power

[@rcvurooom8837]

That’s rad. You can order on gspeedchassis.com. Check there and GSPEED FB page for most current status

[@travisb5930]

What location do you film these videos? You mentioned Mt. Diablo so this must hopefully be in the a Bay Area somewhere. Thanks!

[@RTmadnesstoo]

Is that Orange Vanquish truck at the end having problems on the sidehill because of overdrive gearing?

[@lancevalente8269]

No sir it just cant hold that side hill....

[@poolguru1]

Hey Francis! Long time no see! Glad to see you are into RC still. Just getting back after a 7 year hiatus. Excellent info,love the video. Are there local comps anymore? Hope to run into you at some point! John Hicks.

[@RCReviewChannel]

What up good buddy. I remember you well! Where do you live now?

[@poolguru1]

RC Review Still near the old Nor-Cal Hobbies. Busy as ever but finally got back to RC and I always loved crawlers. We need to get together sometime.

[@jameswagner5098]

How strong are the Carbon fiber rails compared to traditional metal? I’m going to build one of these!

[@Blacksheeprc2024]

Building one here and there on hoz chassis with scx10.2 axles

[@sprather84]

Wow that LCG chassis is impressive would my trx4 sport swap right over to it? Also I just did a review of my upgrades on my trx4 I would be honored if you could check it out and possibly give me some advice

[@KTMcaptain]

Check out spare-time hobbies and Exocaged rc’s optimus or grimlock build. You most definitely can and they’re awesome.

[@ConditionZero76]

sean P RC I wouldn't say you can just swap it over, with some modding & a lot of work you can make it happen.. 👍🏼

[@rcvurooom8837]

I don’t have experience with a TRX swap, but check out the GSPEED FB page. Someone there can assist or point you in the right direction.

[@dustyhumphries3895]

Northwest scale designs!!! Best out !

[@ka4172]

OK i want to watch overdrive versus stock drive ,even reverse driven and extreme side hilling.

[@brianonthego]

I really like the power wagon design. May I ask where that test location is? San Jose CA somewhere. Thanks so much.

[@bryanshull7976]

Lower than a pot belly pigs belly. Ten times better than a stock rig.it can go. More places than a stock rig .bellydraggers rock.🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷🐷

[@FatalMISTER_Z]

Do you prefer a Low CG crawler or a rig with portals and high clearance?

[@ColoradoStreaming]

One nice thing about portals is you can get brass portal axle covers which puts the weight below the axle so its kind of like the best of both worlds.

[@RCReviewChannel]

For smooth trails with extreme climbs and sidehilling, Low CG for sure. Rock rocky climbs, and trail running, high clearance is king!!!

[@FatalMISTER_Z]

@@RCReviewChannel Thanks for the great answer, I really enjoy your videos!

[@joshbrabley7513]

Can you do toyzuki v2 or v2.5 plz

[@jhawk1985]

Im a year late. Im finally building a belly dragger using gspeed and vs410 ultra. Im currently hoping to use the vs410 trans also. Wish me luck. Still trying to decide more class one style or more belly dragger style.

[@justhandguns]

Are those carbon beadlocks?

[@lancevalente8269]

Yes they are from a company called Tech Factory Racing... They are found on Facebook....

[@Firewlkre]

I believe they are just the outer rings.

[@lancevalente8269]

@@Firewlkre tech factory racing makes full carbon fiber wheels... And those are them

[@dretech]

I like this Frankenstein crawler, very unique and capable. How much does something like this cost?

[@EP50009]

In the $900 range

[@wood1595]

I want a belly dragger, Can you do a build video on one?

[@RCReviewChannel]

It is a possibility. Problem is these are usually month-long builds with problem solving, waiting for parts and optimizing. If we can do it in a quick, controlled manner, that would be awesome.

[@rcvurooom8837]

Take a look at the recent episode. I did a breakdown on parts and list of things needed as a base. You can also look up the GSPEED FB page for support or the channel as well. Good luck if you start one. gspeedchassis.com

[@dannersmyers]

I built up a twin hammers to work like this, may be an option for somebody looking to purchase something and customize from there.

[@RCReviewChannel]

Sounds great!

[@steverolfeca]

Please, sir. I want more!

[@brianmoreno3]

More of a Toyzuki fan my self. But most definitely these lcg chassis are not for beginners. Love that Salinas trans. What OD did you go with?

[@lancevalente8269]

He has 30% od which is the sweet spot

[@anujmathur7871]

Your videos are always very informative! Please keep up the good work. I am from India and I dont have access to LCG chassis or parts. Though I managed to get a TRX4. Could you please help me make it a real LCG vehicle.

[@RCReviewChannel]

Perhaps other can chime in as I haven't done it.

[@thomasgross8289]

What model of trx4 is it?

[@anujmathur7871]

The defender! I wish I could update a picture here.i have done a few mods myself. Now it's a single cab defender. Runs on 3s and has a 9tooth gear.

[@ericgoings506]

Cut springs, run full drop spring mount Lil bounce win flat ...

[@tomhol8559]

I have a home made belly flopper delran chassis sporty that i comped back in the day 2008ish I changed the body and now call it a RATROD..

[@shortbusecv49]

Ok sir This is not a negative comment by any means. So you really can’t compare the “G-string” chassis to the vanquish chassis . There is no Comparison and they are completely different crawlers. I’ve used the V1,V2 G-string chassis when Gabe first started making them and a good bud of mine set up his rig Exactly like mine but using Axial chassis and was able to do the same thing I was able to do and we are both are competitive drivers in the crawler World. You can make any crawler chassis a lcg chassis by just using smaller shocks. I personally would like you to compare multiple different types of chassis the are Considered “belly draggers”. If this seems to be a negative post it’s not it’s just my opinion and Many others.

[@jonathanrivera388]

Like to now what kind of transmission should I used. Starting to built one and like to know more about them

[@siblingsrc]

Hey RC Review, I’m currently making a belly dragger with a stock SCX10ii chassis. I’m curious to know if you like the chassis mounted servo better than the axle mounted servo. Thank you!

[@kevingoodrich3050]

Low light and wide.... that's the way I build my rigs. I like using AR 60 axles for even more stability. Check out RC Crawler and look up wroncho builds. Then check out Harley Designs wroncho build. Looking at getting some capera axles and building one of these rigs. I like borrowing peoples rigs and offering to set them up for performance and giving it back to them.

[@RCReviewChannel]

Will do. Appreciate the leads.

[@ConditionZero76]

another awesome video & vehicle!! whats the ground clearance on the lcg? if you mentioned it in the vid & I missed it, Sorry

[@RCReviewChannel]

Not sure. We'll measure.

[@ConditionZero76]

@@RCReviewChannel Thats fine, I was just curious. Thank you

[@rcvurooom8837]

It sits about 2.5” from skid to the ground

[@MrHart-fd1wf]

Vu, did you end up trimming the rear of the v3 chassis on your rig to have your flat bed sit flush with frame rails? I ordered the Salinas flat bed and the rails sick out past the flat bed.