LS Droid Information

[@Marc_Wolfe]

If anybody cares to know, the OBDLink SX (the not wireless one) works with PCM Hammer. Read a couple P59s. 20 minutes for a full read. One was on a bench harness; one was in a stock car. Flashed no VATS calibration in 2 minutes.

[@kylealexander1172]

Yes it works excellent. I actually prefer it over using any of my expensive j boxes (j2534) including a gm MDI2 honestly. (They're not reliable but 4x faster) the sx cable is reliable as hell worth the extra couple minutes.

[@PeteS160plus]

Ls Droid Beta V0.2.0 blocks flashing if you are not connected to the internet when the app opens. This was done as a fail safe in the event someone were to find a major flaw that was NOT user error and would result in PCM damage. The internet check was only designed so flashing could be disabled to prevent others from running into the same issue.

[@nathanparks3028]

Thank you for that information. That makes a lot of sense.

[@rayreisenauer5311]

@@nathanparks3028 Z Qpn nm

[@mistersniffer6838]

uhm, no, doesnt make sense, at least with more explination. How does the Internet save a computer if its a bad flaw even if it opens?

[@newburgfdz71]

With Pete and his partner doing this in there free time is why I bought one of his obd readers

[@dusting.1031]

I can unbrick those without desoldering the chip and it's not the ground trick. However you do need to open the lid to do it. I have a few tricks up my sleeve...

[@georgenettlesjr1466]

Info? Please!

[@russellsnyder4221]

I subscribed to gearhead efi .did a read wrote down my os number but could not find on that matches in gearhead efi so I quit trying again I barely know how to use a computer .any help wld be greatly appreciated.

[@terrywilson2525]

What android tablet would a guy need to download the ls droid ? I have a Samsung galaxy note.

[@russellsnyder4221]

I only wished u had the knowledge that most of you fellas have

[@bradhawkins8546]

How much for a tune, 2009 gmc sierra 4wd wt, with a cam. Please contact me!!

[@crackseller321]

Great video brother. Can you email me instructions on how you built the bench box

[@GlobalMediaInc]

Great Video And Information!

[@scottgivan4493]

Awesome info. I appreciate the video.

[@operationchevy3866]

I'm on board with seeing if you have a parts list and how you built your bench harness too by chance?

[@mrmidnight32]

Mine literally won’t write because I don’t have 3 previous flashes. But when I go to do “practice” flashes it keeps saying low voltage weather it’s hooked to a fresh 12v battery or a 3A 12v laptop adapter

[@russellsnyder4221]

how's it going Nathan I've been trying to do this from another video .could u make another video like this showing how to find the same os number and how to delete vats rear o2 and ect I'm not computer savvy and really need to be showed just once plz .I'd pay if need be I only have a tablet .phone desk top and already have bongle and bench harness

[@bobbobby1846]

you do not have to remove chip to reflash bin. there is a pin you ground out for a second. PeteS160 tells how to do it.

[@nathanparks3028]

That doesn't work for PCM's with a corrupt boot loader. Also, that comment was misspoken and was corrected towards the end of the video. It's obvious you didn't watch the whole video... And it needs grounded out for half a second, not a second.

[@bobbobby1846]

@@nathanparks3028 i ve done this myself. i have also flashed an 2001 chevy with the ecm still in truck. use the same obd link mx plus. also pcm hammer just released number 7. here is link to page. comment #728. ls1tech.com/forums/pcm-diagnostics-tuning/1892142-inexpensive-opensource-flashing-read-100-working-36.html#&gid=1&pid=7

[@nathanparks3028]

@@bobbobby1846 Ive had multiple P59 PCMs not respond to the pin reset and was able to recover all of them by removing the chip and soldering it back on. I've also been able to recover a handful of them with the pin reset. Basically, I'm saying the pin reset is not a full proof method to recovering a PCM.

[@bobbobby1846]

@@nathanparks3028 amd chips seem like more work then intel. maybe a hit and miss.

[@kevinhumphrey932]

Kick ass tunes in background

[@cablehater]

thats a clean set up

[@HyPex808-2]

do you have a parts list on how to build that bench harness?

[@joshmarmolejo7980]

Can you please point me in the right direction to download the LS Droid V6 version you have? I’m able to read the pcm using the LS Droid but I don’t have the version you have where you can write the pcm. I’ve searched everywhere.

[@franciscoromero1827]

I cant get the os id to show even with the gnd pin, oblinklx and lsdroid or pcmhammer, my only option is to desolder and reflash stock bin with gq4x4?

[@scubastevoo8404]

MAKE SURE YOU HAVE HE HARNESS PINS IN THE RIGHT PLACES.

[@pepelapew2724]

This only for ls engines ??, thanks

[@PeterTremonti]

That's a great idea for the universal OBD II Power/Ignition switch box. Did you take pictures when you were building it?

[@nathanparks3028]

Yes, I have a some pictures of it being assembled.

[@bobbobby1846]

there is a efi live pdf file that shows pin connections. google it.

[@scottgivan4493]

@@bobbobby1846 That's what I made originally. Been using it for a few years with EFI Live and HP Tuners. Now with LS Droid.

[@martinez1701a]

So basically I can make a clone of my ecu? I can make a stock ecu and a "modified" one for the same car or truck nice. I actually broke down and bought HPtuners for $300 no credits yet but I can still use this process so I dont have to buy credits for each car I wanna tune.

[@helloitsme4139]

I wonder if this would run on Bluestacks (pc android emulator)

[@Marc_Wolfe]

I wonder if it will work with a USB OBDII adapter instead of wireless.

[@kravmaga7070]

i couldnt either android phone i tried installing Ls droid on, to register so i tried pcmhammer and it read it immediately and saved as stock pcm. Then i used Tunerpro to delete VATs, enable both fans to come on at 210/215 and both go off at 190 and it saved apparently BUT it gave me an error at ime of saving saying some checksum files may be missing. So im very skeptical about writing that ot my pcm in fear of bricking my only pcm. I know its Lsdroid direct competition but any idea whats goin on with Tunerpro about those missing checksum files?

[@kravmaga7070]

btw, Pete was getting pissy with me and all smartass so i really dont wanna use a snotty persons software even if its free.

[@ajf1006]

What did you end up doing to get the fans to come on?

[@TheDavidFutrell]

What tablet are you using?

[@tuffcustoms1825]

i like ur style

[@operationchevy3866]

What state are you in?

[@rubenfilippus2956]

The link where i can buy that kit?

[@robertshupien7746]

Does anybody have the bin files it won't let me download my account is not accessible for some reason

[@kb36b]

will an amazon fire tablet run ls droid

[@nathanparks3028]

Theoretically it should. A fire tablet runs on a Android OS.

[@rodriguezluisu87]

Can you remove the vats with this program/app?

[@superrodder2002]

This is a read and write program, once you read the pcm and save as a .bin file, then you load it into a program like TunerPro where you can disable the vats and do major tuning changes to the programing. Then save the modified program to a new .bin file which you use LSdroid to upload back into the PCM. EASY . At least in theory

[@ugd240000]

can you send ; link to the app

[@nathanparks3028]

www.ls-droid.com/

[@waynelingle8122]

Where did you find the LS droid write?

[@thegxpguy]

this shit does not work, ive torn my hair out trying to get it to work

[@mistersniffer6838]

"give" me your box! :)