How to remove Paint Scuffs on your Car !! Diy

[@Mad4Motors_]

New video on" how to paint the hood on your car". Take a look!! kzbin.info/www/bejne/laDacpV3rJx5iac

[@selvarajb8896]

[e-mail]

[@jesusmelchor7681]

If i don't have that 2 k clear coat what other clear coat could I use

[@natashaprame9226]

Thanks so much for this tutorial! I repaired huge deep scratches on my car (took me maybe 10 hours all up across 2 days). I'm a car noob but following this video helped me get perfect results! I really appreciate the simplicity of this video and the fact that I saved around $1000 by doing this myself. Something I didn't expect however was the mismatch of my car gloss with the acrylic lacquer so I had to buff out the repaired area afterwards.

[@Tim252525252]

good tip: in stead of using tape on the left on the bumper what will leave a line you want to use a A4 paper and fold it in half so you have the round side of the paper facing the part you want to paint. in that way you wont have a line but you have a smooth trasition.

[@Mad4Motors_]

Hi thanks the transition was invisible after I flatted and buffed it next day thanks

[@PoppinPortraits]

Tim ...a better tip: the bumpers tiny, paint the whole darned panel, simples, no transition!!

[@redsuru2217]

Ye that’s true I work for a company which dose all this stuff mobile

[@redsuru2217]

Padoir of Ireland 🇮🇪 you would still have to blend it

[@PFab]

@Amos Burke 2 years later.... Flatten means to sand.

[@jerrymatthew4394]

Well done, I already get my bumper repaint and it cost me $ 500. You probably spend less then $ 50 and the result look not bad at all.

[@shiewaanwyeth5922]

Hi. What I like about you my sir. You don't leave any small detail out. Like most of the other guys. I'm definitely a big fan of yours. Thanks again my sir.

[@paulhunter123]

yes theres a hard paint line where the paint was applied right up to the taped off area. This could have been avoided by not taping the masking paper tight down to the bumper but placed over it instead and secured. However with a fine wet and dry paper it could be feathered in and buffed up. which i later read is what the guy did and got a seamless transition. Good repair.

[@ColinPrince]

I enjoyed the video you made repairing the Audi, but this video made me believe that even I could do it. My biggest mistake in the past was not taking enough time ( impatience) and applying the paint too thickly, both of which I now recognise as my main mistakes. Thanks so much. Colin.

[@robertcain3426]

A tip. Apply the filler first and then sand the whole thing once. Yes, it's unorthodox but the deep part of the scratch has already been abraded so it will stick unless it's an old repair and has been waxed.

[@R0GUES]

I've been painting and repairing cars for 30 years I do love reading all the comments lol highlight of my day 😘

[@trevorbaker1537]

Nice clear no-nonsence video. I will definately be following this advice to repair a deep scratch on our Honda. Great looking job too so I will be chuffed if my repair looks that good.

[@johhny212100]

As much as this is a great video it's not for amateurs , you need a shed for one , it's time consuming, it's not worth the hassle for someone to try it inexperienced. Not too knock your video it's brilliantly done...I had to get my corrected by a panel beater, still glad I tried it. I def recommend watching it a few times and do small parts at one time.

[@Johnboyjws]

Great video I feel confident enough after watching this to tackle my Jaguar XF front bumper thank you

[@MichaelLesesne]

Note: Don't tape the side you aren't painting. You'll have a hard line. Some fall over from the paint is okay. You can always buff out imperfections later. 👌🚗👍

[@lightskinsosa9220]

Mike Lesesne what can i do if i end up with that hard line?

[@C4shmoney]

I used a curved paper edges because of chris fix' shit and now i have a hard line! fuckkkk now i gotta repaint my shit and do primer, base coats and clear coats again sighhhh

[@paulhunter123]

@@lightskinsosa9220 fine wet and dry the line in and buff up with compound

[@masonzizovski449]

@@paulhunter123 Do you do this before or after clear coat?

[@paulhunter123]

@@masonzizovski449 before bro

[@UKtilly]

This time we will be expanding our spray area to cover the whole car.

[@pandascribbles7211]

Til williams 😂😂😂😂😂

[@PFab]

You might as well start painting the house after.

[@timvu3095]

Very good and clear instructions on how to repair and repaint the bumper. However, I can see a line where the tape was on the left side of the painted area, meaning that the paint won't have a consistent color with the rest of the bumper. He should have repainted the entire bumper, so there is no line and the paint color would be consistent across the entire bumper. Even if you can get the same paint using the color code from the manufacturer, it does not mean that the new paint is exactly the same color. It appears that he did the work outside in the drive way or the street, which is no no for painting. You can do all the sanding, body filling, and scuffing outside to keep the dusts level down but you want to paint inside a garage or close space, so you don't get air borne contaminants to settle on your wet paint. The best option at home garage is really using plastic liner and masking tape to make the enclose space big enough to keep the car inside and prevent the dusts from settling on the paint. Of course, you would want to wear decent respirator for the entire time including sanding, cleaning, painting, etc. to protect your lungs from the nasty dusts and aerosol paint. He is right on one thing, the painting has to be done at the right temperature and humidity so that the paint can dry and cure properly or it won't last.

[@patrickarseneault7407]

great video but one thing you never do is cut a panel or bumper in half to prevent paint from going over. what it will do is leave a line when you tear the tape off like what happen at 8:40 . you should be better at leaving it open and light spray over to do a blend in

[@tataynigimo3551]

Wow! Great job! I just stupidly bumped our car into our wall. Now the left side rear bumper has a crack and the sides of the bumper has a long scratch. I hope I find the right red color though. But thanks!

[@Mad4Motors_]

Yes give it a try!

[@Thesanaraheem]

I scratched or I should say scuffed my inside car frame (front passenger door). Went to kfc drive through it was dark and quite narrow (never used drive through before). I’m quite worried. Husband doesn’t know yet 😭

[@imachildofthemosthighgod2906]

Magic eraser helped with those types of scratches that truly amazed me 😅

[@gwhiz6958]

Thanks! As a first-timer this helped me out a ton.

[@BuffetBuff]

Be sure to designate a safe space for your vehicle, away from moving traffic. Ideally in a garage with adequate ventilation to prevent particulate matter from landing on your paint during each stage. Quite a great job! (I think it'd look stellar if you contacted your manufacturer and matched the make(I presume a Volvo or Saab) and model's paint to match the original engine manufacturer's (OEMs))

[@Ag3nt0fCha0s]

I scratched my door and cannot be bothered to make all this effort. I think I will just buy a new car.

[@zaink7037]

Why not buy a second hand one? My car has around 3 pin dents on the passenger door. I was thinking how much would it be to pay someone to remove it but I forgot I could get a second hand door

[@nigelfarrell8860]

Lazy shit 😂😂😂

[@Ralph1826]

Ag3nt0fCha0s I respect u for being honest

[@sumitgupta6842]

Hey everyone, the best results that ive ever had was with the Magic Painter Method (i found it on google) without a doubt the no.1 course that I have ever tried.

[@Vlogs_of_JP]

Hahahhaah

[@coyote5735]

The only thing I noticed was the overspary on the left of the bumper @ 8:42 there is a definite line in the paint from where you removed the masking tape.

[@designerbumpercovers-luxur7673]

Fully understand and respect your view. Our products are not everyone.

[@rockinvida1960]

Looks really good but I’ve read you’re not supposed to use bondo filler on a plastic bumper? Thoughts?

[@ALEXANDERCRETA1]

How you remove the line to the left from masking paper tape that makes the differend to the old paint from the new?

[@godemon_with_jls6948]

Usually paint shop persons blend it by wet sanding with 3000+ sandpaper and buff it with compound

[@lastmanstanding2789]

Great video and easy step by step guide which I would have no problem following and achieving... But this is my main problem !!!!! How to correctly match the sprayed area/colour to the original colour ??????

[@smauringhojai]

Can you please give me the names of products used in the process?

[@MichelLinschoten]

You need to start with 80 sand it until the BLACK do not do it like he shows, as the filler will not grab on well on the finish of the bumper! Then you will see deeper scratches fill those. Then use 80 again to take it off the filler. Then use 180 to smooth it out gently and primer it, a couple times then fine sand it, then paint it

[@pauliusgedrimas978]

awesome video, i'll be trying this method this week on my car. Thanks again.

[@anishnair7245]

Sir can you please add links to the various items you have used???? even some description notes should do...

[@SANDWICHSD]

That'd be great

[@teekhan238]

Halfords

[@foppo100]

Still a professional job in my opinion if you want it done properly.I used to hand paint my old VW Beetle I didn't care.If you want to bodge it on an old car fair enough..

[@scorpion-qp6vs]

u need to use blend out thinner so u don't get a hard edge and probably get a coloured matched aerosol from an car paint supply store because hycote only have standard shade color in there aerosols just a tip.

[@andrewwilliams3709]

The black moulding will just pop out, leaving it there made an easy job a bit harder.

[@survivethrive2468]

Man that looks awesome! I just curb rashed my front bumper and its killing me knowing its there underneath. Smh

[@philtrottier4442]

Excellent! this is by far the best video I have seen to repair that type of damage.

[@RobWhittlestone]

Good job, good video! Thanks for the insights! All the best, Rob

[@markdaniele4539]

This dude actually owns an expensive body shop and he is hoping that everyone here follows this video and then comes to his shop because of the two different color bumpers.LOL.Just joking Mad4Motors.You tried to help and that's nice of you.

[@TheMrmmkkpro]

That was cool when you fast forward the sanding! I'm working on a 1990 ZR1 Vette bumper , this will help , thanks.👍👍

[@claytonsetuki6260]

Truthfully, not bad for a DIY. Not bad at all. Well done and many thanks for the informative video. Still sceptic to try it out by myself, though :-)

[@bidin2011]

remove that black trim to make easier and get better finish, it pops out easy

[@simonwale6993]

Thanks for this. Now I know how to repair a scuff 👏👏💯🙏

[@costym.2328]

Felicitări pentru aceasta prezentare .Succes

[@prettypaws3115]

Just amazzzzing! You're a real Pro! WOW!! Question - does the primer need to be the same colour as the vehicle? Also, I have tiny wells on my hood. I think that's what they're called. Would I use the same method as above to repair this chipped paint?

[@geoffroyfalot3583]

No it doesn't

[@rayblessing9058]

Thanks for the technique! Where can someone buy the spray paint to match the make and model of the car? This information would be extremely helpful to your viewers!

[@bc-mr1si]

ebay😊

[@KidNoah2012]

At 9:04 when you remove the masking tape and paper you can clearly see the vertical boundary line where the new spray met the original coat. How did you remedy that line because that always happens to me on these kinds of jobs (complete DIYer) and I can never fix it. Also I noticed you very cleverly stopped the camera from panning all the way over to the line I'm talking about when you showed the final job and congratulated yourself on 'not bad for a morning's work'. Hiding something?

[@Mad4Motors_]

Sorry for not showing it clearly, this is a more recent video with the blend shown in full kzbin.info/www/bejne/farJnIBrhp19mLc

[@chrisrobbins2632]

@@Mad4Motors_ That was clearer. Thank you.

[@brzcz]

You make it look so easy

[@sicktwistedkids]

Just a TIP don't tape the other side of the bumper when applying the colour and clear coat or you'll end with with a picture fame affect like you did in the video where you can tell its not bleeding into the paint

[@ptsdmentalhealthuk]

Nice results. I just wish I could sand at fast as you 1:00

[@paullomas4620]

You sir... are a gentleman!!

[@medievalmusiclover]

Nice Jod Sir. Amazing! Congratulations for great videos.!

[@Andros94x]

2 different colors

[@teratonexplosion]

yes, that's why he didn't show the whole bumper at the end, as you can see it.

[@alkalionpower]

Obviously the new paint inst going to match the paint that has been on your car for years...the only part where he screwed up was he masked while putting on the base coat and didn't blend anything.

[@CHATHK]

Yes i think he should apply only one coat in final

[@toxrozzx8158]

Yup i've tried that many times not blending it in, then there appears a line

[@ClvyD]

the purpose was to show how to repair the scuff

[@jessechapman6633]

Amazing video seriously good work there

[@Sandrone10]

Good job bro 💪

[@Twitch_Moderator]

People going on about the difference in color: *IT'S CALLED FLASHING!!! PAINT LOSES IT VIBRANCY AFTER UV RAYS FADE THE COLORS OVER THE YEARS. CHILL OUT!! IT LOOKS GREAT.*

[@marksmediafpv9275]

Nice patch of different colour 😊

[@justaroundthecorner2883]

Many thanks for the upload. Why did you have to spray such a large area?

[@craiganthony1069]

Paint has left a edge hence why the full panel should be sprayed.

[@MichaelLesesne]

Or... Don't tape it off. 👌

[@Gitano281]

Very helpful vid. Great narration. Thanks man.

[@ratchriat1716]

how did match it to the original colour enjoyed the video.

[@Aesir5]

1:51 you do much better body filler application than me!

[@andyrantshumanphilosopher7571]

Paint matching tho. Doesnt come in your usual £8-15 rattle can on some car colours. According to one site, £47 for a 300ml spray can and some clear coat.

[@gazzablanca]

Cheers mate. Love the accent. Great video. I learnt a lot.

[@tommievampire1]

Good tip,I will make my bumper color not the same..Your a genius..I will give you 5 stars *****

[@harleydavidson82]

Wow Nice Job Buddy ! All Videos are Great

[@Mad4Motors_]

hey that means a lot! thanks

[@juniorelleston81]

Would love to see this exact damage on a white car bumper

[@jeffreycote2383]

That’s exactly what I have

[@halifax5309]

Ur Videos are absolutely amazing

[@stephaniecarr6984]

Great vid...it's even worse when someone ELSE caused it.. came out of the store yesterday and found a huge scratch...sigh. I want to try this...it'll save me a 500 deductible. Where would I find the paint to match my car- the dealer?

[@JohnnyB43]

Excellent tutorial - thanks 👍

[@marlawatching]

I recently scratched my car on a column and the body shop is quoting my really high prices. It is burgundy Fiat 500 so what will I need to get do the repair myself? Sanding papers (of different sizes), body filler, primer (should I look for a red one?), the actual paint colour, and what else? Your reply is much appreciated

[@Tigermoth24]

Be better if we saw the area where it was fluffed off along the bumper, you normally have over spray and when buffed n polished it shows a line like a join.

[@willieblair8937]

Hi watch alot of your clips can you help got halo on my car front wing how can I get rid of it thanks you clips have been helpful

[@MrAlvarez23]

I just watched this first videos and I have to subscribed, such a great job💪💪. I will deft try this on my car. I have a question when you used the primer where can i find out what color do I need for my car?

[@Mad4Motors_]

Hi colour code should be on a plate in the Engine bay or some cars inside a door

[@MrAlvarez23]

Mad4Motors Thank you so much for your quick response, your videos r great good job. I'll deft try to do this on my car.

[@Dan_druft]

How come the bumper is a different colour from the rest of the car ? and you have masked so you have a hard edge. You should have compounded the rest of the bumper and on the last coat of clear used a blending clear thinner

[@karmavr3358]

Dan Druft cause he sprayed it...

[@sward6198]

It should be lol

[@fernandojacinto8049]

Ufc

[@DavidPLopez]

i wonder how people that know how to do this manage get into this video in the first place

[@rockyjayy4928]

Dan Druft ppl

[@fatmaalramezi7504]

Cant believe it it looks amazing

[@jydeda5004]

Very good tutorial - Is it okay to use a cordless sander instead of manually doing all that scrapping and smoothing?

[@Mad4Motors_]

If you have one use it it will speed the process up!

[@blizteredthumbs7911]

Nice to see a fellow Irish man not afraid to get his hands dirty. I was at this today on our golf. 100% not the right conditions, I was huddled under an umbrella on a child's step for a seat. I got as far as primer and spotted a few pin holes. I want to try get it right so I'll get some pin hole putty. I seen your other video, the golf wheel arch, that's what I was doing. Really bad rust/paint blisters. Do you know the gold golf you painted. There is a block of foam in the arch, that's what the problem is, vs installed to prevent vibration. I grabbed a good 6" of it and pulled the fucker out. It was ringing wet. Just needs a touch up and rib down plus some more degrees before I paint. But it's too old to be sending it in for £1000 pound vs wings respray. There was a recall but they're no longer taking full responsibility. I must remember that when I committed murder. Arrested me? No no. I no longer take responsibility for my own actions lol good job sir either way. You sound like your name might be Joe, or pat or something. Am I close? :)

[@Mad4Motors_]

Youre close! Good to hear you repairing it yourself!

[@blizteredthumbs7911]

Mad4Motors Pádraig! Would it the cowards name you be puttin on me ?!?!? :)

[@stephenfalken]

Nice tutorial! I need to repair our silver Focus. One question though... after sanding sanding the filler and moving to 180 or higher for the area,, how do you know when you've sanded enough?

[@AllectTv]

I guess when it’s smooth enough

[@victorcordero1458]

So why body shops be telling me they need to repaint my whole car for something like this

[@sesaralvarez2334]

Victor Cordero for the $$$

[@JFhimalaya]

Maybe They are right because When the paint got lighter by the sun and you paint that little spot you wil see a big color difference you understand

[@calvinlaudrensio415]

Because you probably don't want to end up having a bumper with a different color from the body like this. For me personally it's an eyesore, I rather keep the scratches.

[@trentriver]

Just paint the entire bumper of it bothers you.

[@maxmanx1294]

Good body shops can blend so well that we can't tell the difference. It is unnecessary to paint the entire car unless the entire car is scratched. Go to a real body shop & make sure it isn't a place designed to paint entire cars.

[@anasstas8061]

Wooow good job really nice job

[@jeffdavidson7860]

No adhesion promoter? This may be a problem in a few months. The paint could detach.

[@gregbellinger5765]

Tape off the black protector piece before sanding.

[@mostafasenni6579]

Great work

[@ALITICAL_AI]

I now have the confidence to ruin my car 😅. In all seriousness, these videos are brilliant. Thank you.

[@Mad4Motors_]

😂Thanks for watching

[@noelcallan4071]

So how do match the exact same paint color to the original color ? Is there a paint number somewhere on the car ? And if so is it easily available in rattle spray cans ?

[@charlesdudek7713]

The color code is usually on the driver's door frame. Your owner's manual and/or dealer would help you locate it if needed. The paint is normally available at either an auto parts store (often cheaper price) or at the dealership. The problem is it rarely matches exactly. If you notice the new paint in the video doesn't appear to match exactly either.

[@kobekile8099]

When you guys are saying to buff out the hard lines he leaves from the tape, what do you mean by that? Do you use sandpaper to buff the transition?

[@ElGranRojo903]

I believe wet sanding and more clear coat.

[@kobekile8099]

@@ElGranRojo903 what is the purpose of wet sand vs just dry sanding? Haven't worked with paint much lol.

[@ElGranRojo903]

@@kobekile8099 it's smoother & less likely to cause scratches & is often done after dry sanding. Dry sanding is a bit harsher

[@lex9727]

You are left 1 step! Where is the transparent ? How much temperature the color?

[@new25651]

I can see tap line how u blend new paint with old paint I did it and I have same new paint line because of tape

[@AlanVonGoodleef]

Subbed also. thanks for the good video bro!

[@motasralucamaria]

There are many factors in doing a pro job. One resource I found that succeeds in merging these is the Magic Painter Method (google it if you're interested) definately the most incredible info i've seen. look at this great website.

[@rimad6882]

There is black scratch, up right ,few other. I believe these scratches goes to the bumper plastic. You did not use putty on them.

[@joey95661]

Wow what alot of work

[@PPSEPS]

Excellent work Thank you

[@jdmlegends3009]

Could you tell us what body filler you used in this application? The body filler I used didn't have that nice smooth, buttery look.

[@Mad4Motors_]

Standard car body filler

[@sushilagolecha6320]

now this is a NO BULL SHIT Video?!. surprised that you didn't post affiliate links making it true DIY. kudos. do however post the products needed- as I see you spoke of PRIMER, FILLER, SAND PAPERS, MASK TAPE, ALCOHOL, SPRAY PAINT AUTO. was it complete? Also what if a new standard black bumper needs paint on it(matching car manufacturers color) ?? -- is just a direct PRIMER application+ SPRAY PAINT good enough? glad, if you'd reply. Tada.

[@alexd1922]

Probably better to go to the paint store and have them match the paint and put it in a spray can. I can see the difference on the color of the bumper. Great vid though.

[@MacoGrande]

He didnt finish yet. There is still a bit of blending to do. Since he masked the very edge of the bumper he has a hard line. He will have to sand it with 2000 grit and then polish the full panel. It should be all even by then

[@cebrailkudret4311]

Alx D pa

[@mazman8343]

Plenty good its not a rolls .good job

[@125sm3]

New subscriber, just came across your channel. Great videos and instructions.

[@gaming2121]

Amazing. Great job man.

[@leklusakkoklu]

Hey you. I saw picture-frame effect at most left side of spray but you did not show it.

[@Zodliness]

Nice simple informative video. It done just the job for me.

[@francescobianco1135]

complimenti un bel video sicuramente continuerò a seguirvi