I just spent two hours researching these goggles (novice to drones). I saw many videos where they talked a lot but said very little. Your video is excellent. Everything I wanted to now in one short video. Thank you very much!!!
@RandoManFPV Жыл бұрын
Well said. I've watched hours of drone videos now and still don't know all the terms and parts or what they do. I still don't know what all these different numbers and stuff means or nothing but I've listened to so much talking. It's like all the drone channels are already so deep they just expect everyone to understand their terminology but new guys like me are just confused lol
@johnk88253 жыл бұрын
I'm not currently interested in getting DJI goggles and watched this because it popped up with the notifications. I was thoroughly entertained by this video, it was quite interesting and very informative, you did an excellent job of making the antenna and functionality differences very clear. Thank you.
@JoshuaBardwell3 жыл бұрын
A small correction to the table: the v2 goggle does not do 810p orn144 Hz with the air unit or vista, only with the new Flash drone.
@MadRC3 жыл бұрын
This comes form part of the mess of the launch. The original media page for the V2 on DJI stated that the Live stream was now going to be 810P and it showed this as being the case for the Air units as well FPV. However now that’s all gone and is not shown anywhere. I do believe also it’s not going to happen in the future however I left it there as that’s what they said originally. Even the current Dji Store spec says 810P for live view but does not make it clear what they mean. Frankly the whole launch was a mess and listening to your comments you got the same thing as I did with basically hay you can talk about this tomorrow then is was all don’t talk about it. In the end I choose to leave it in as they appear to say is was going to happen but I will add a sticky post to explain better as that’s warranted. Appreciate the feedback.
@charlesmarseille1233 жыл бұрын
@@MadRC You guys are our references for infos on fpv subjects. Might aswell keep it down to the TL;DR so the guys/gals that listen at only your video get the best idea of products. Appreciate all your work so much, thats why I bother commenting constructive criticism.
@charlesmarseille1233 жыл бұрын
also, the usb out is just for the dji fpv drone. So... v1>v2?
@MattShonan3 жыл бұрын
"Flash" ;)
@eddieremington3703 жыл бұрын
i know Im randomly asking but does anyone know a tool to log back into an instagram account? I somehow lost the password. I would appreciate any tips you can offer me!
@solo88203 жыл бұрын
Thank you so much. New DJI FPV drone is finally here in my hands. I’m always looking to upgrade the antennas but for now. I’m going to wait for V2 patches/omnis. You just saved me from making a bad purchase.
@beefybeef13263 жыл бұрын
As always... clear, concise and packed full pf useful information
@xjet3 жыл бұрын
How can I show my face at the field with only old V1 goggles? OMG... if I don't have the latest and greatest I will be so embarrassed! But on a brighter note... I'm going to try a home-built helical on the bottom right antenna port of my DJIs and see how much improvement I get. Stay tuned for that.
@twinturbostang3 жыл бұрын
Just put a "V2" sticker on them. :-)
@armani007E553 жыл бұрын
@@twinturbostang Exactly E-Bay has them. :)
@Freebird_673 жыл бұрын
I have both V1 and V2.and I prefer my V1'S over the V2 as I feel they perform better at handling RX signal. Like you I run a 3 turn or 7turn heli on bottom right and I've gotten insane range. Also I will use my Iflight Crystal patches both connected to bottom ports on the V1'S and get decent results. Now my v2's I haven't yet found a good solution. I've tried multiple antenna placements on the V2'S and I haven't gotten very much if any difference than stock, actually they seem to perform worse when I'm NOT using the OEM antennas on the V2'S. I just let others that want to watch me fly wear the V2 set because imo The V1's out perform the V2'S when using with AirUnits or Vistas.
@whiteyguitar6663 жыл бұрын
I would have thought Bruce to be clever enough to build his own HD goggled lol
@ZangaoFPV3 жыл бұрын
Very nice information. I am hoping to get a V1 for cheaper if people upgrade to the V2, that piece of info makes it even better hahahah
@AlfieDoug3 жыл бұрын
Thanks for the update. Disappointing that Smart controller still needed by V1 for video out.
@AntonEvdakov3 жыл бұрын
could you answer how right to use patch antennas for goggles v2? how to position it correctly
@Rcschim3 жыл бұрын
Hi Ian, question to V2 goggles: is the new antenna config if we use the V2 goggles in V1 mode? Or does this maybe only apply to V2 mode with Occusync3 mode? That's all so complex - makes testing antennas hard. maybe you've seen my V1 tests - there I found that the bottom left port is the most impactful (the RX only) for good range. I understood that TX (for control commands) doesnt need to be a patch since only a few bits of control info have to be sent... If this is correct I should see the best range with 5.8 directional antennas on the RX only ports (bottom left, top right) and the other 2 can be omnis. Or (my fav): using 4 directional 3turn helicals :) Will do some testing with V1 vs V2(in V1 mode) regards to static testsetup video range. curious what I'll find ;) greets, Mario
@charlesmarseille1233 жыл бұрын
@RCSchim, one quick way to determine this would be to grounded-faraday cage each antenna one after the other and range test. This will allow to determine which antenna really does what and which config is the best.
@MadRC3 жыл бұрын
The patches on the RX ports seems to be the best overall. As you say the onmi will be fine for the Tx for the most part as that’s got the power behind it. Having as much gain as you can on receive side seems to always be the best outcome.
@findler3 жыл бұрын
@@MadRC doesn't that also mean that facing the right direction is way more important now?
@pepermintpilot1694 Жыл бұрын
Thanks mate. Funny thing is I was going to ask you this very thing! I bought the V2 (I already have the V1) and thought to fit the Crystal patch antennas (I already have these on my V1). Don't know now if thats such a good plan! Take care.
@alepetra3 жыл бұрын
I have dji goggles v2 and fly dji fpv and also other fpv like iflight with caddx vista. Should I buy iflight pacht antenna for using with iflight fpv to get better video signal and then swicht antennas for dji fpv? Thanks in advance
@robertparenton747011 ай бұрын
Excellent presentation. Thank You! From Frisco, TX
@nenaddinic3 жыл бұрын
Vision 1 vs Vision 2 :D cheers mate, great review.
@gcdevicegc6103 Жыл бұрын
So, in case we use elrs we wouldn't mind about antenna even with the new Air unit 03? We can use direct atch antenna 5ghz ?! In this case it doesn't use 2.4ghz anyway right?
@AerialWaviator3 жыл бұрын
The antenna configuration details were very useful. New to DJI, having just received my v2 order today (and was wondering if/what patch to get. Will hold off for now.)
@YooperFPV3 жыл бұрын
Except that now its patches on the bottom omni on top. His info seems to be debunked unless @Mad's Tech going to pull off a test like this? kzbin.info/www/bejne/eZuWlXt-bpeMn9E&t
@zero1zero1843 жыл бұрын
Excellent video. For those of us who are only interested in using the air units on 5.8G. Will the True rc X-Air 5.8G MkII antennas that plug into both ports on each side, still work well on the V2 goggles? As I have just recieved V2 goggles ( retailer being less than honest ) instead of the V1's they had listed. I bought the two X-Air antennas for the V1's and now have a potential issue. Also has the new firmware been released for the V2's as I don't want to brick my expensive new toy! go DJI.. Thanks for your input.
@davincifpv39833 жыл бұрын
Nice!! Can we use the goggle in the simulators?
@vizjion62592 жыл бұрын
Great info, very thorough 👍👍👍
@TERBANGFPV2 жыл бұрын
So for longrange with v1 goggles, the patch antennas both best on top right? Because the patch can get re transmition if they have low or bad interference.. why ppl still said patch best on bottom? For freestyle yes patch on bottom and omnies on top.
@sw.dronuje2 жыл бұрын
please update the topic what settings will be the best at a distance, and what settings will be the best for rooms, it is about signal penetration
@lukasz.c3d146 Жыл бұрын
Is that mean , If I buy crystal HD path and I going to fly with my dji fpv drone , that antennas will not work ?
@fpvraver3 жыл бұрын
Would you recommend a patch and 2 Omni for 5.8 ghz or just stick with the version 1 stock antennas? Also if you recommend the patch in the Omni what’s your recommendation ?
@victorcarneiro7256 Жыл бұрын
hi , quick question , for max range on dji air unit v1 with googles v1 , do you think 25mb/s and low latency got more range than 50mb/s low latency ?
@elyselapalme70403 жыл бұрын
Are you saying the v2 will have a better or worse signal?
@FLYANDI3 жыл бұрын
U helped me lot lately .. subscribed.
@j.c.matteson74493 жыл бұрын
So at this point is there any benefit of you're using Caddx Vista units to buying the V2 instead of buying a good deal on a solid, used V1?
@aymen39622 жыл бұрын
Solid V1
@GBMark90 Жыл бұрын
What are the physical differences between the 2? I want the v2 but I can get hold of any new in the uk and want to buy used but don’t want to get conned?
@fpvraver3 жыл бұрын
If I have the V2 goggles and I was looking to get better antenna reception should I use the V2 antennas or the V1 antennas ? I only use 5.8 GHz I fly freestyle. GepRC Mark 4 HD Vista nebula pro.
@RandoManFPV Жыл бұрын
Do these patch antennas work on 2.4/have a 2.4ghz option for purchase yet?
@verdi60922 жыл бұрын
Hi, if i only have vistas, is the v1 better than the v2? Im planning to get dji goggles
@PowderMill2 жыл бұрын
Thank you RF God!
@jmace11ab3 жыл бұрын
If I have V2s and 2 x-air patches what would an idea setup be? I currently have one on each side (uses all 4 ports). But am trying to wrap my head around what is optimal. I know I should consider buying some omnis for variety of antenna. Would there be any benefit to running them diagonally so that one patch covers both RX and one patch covers both TX? If I am understanding correctly as I have it setup currently each patch covers a rx and a tx. Does it even make a difference if I move these around considering the antennas I am using are identical?
@kerrycorcoran48853 жыл бұрын
For clarity, I am planning to purchase v2 for use only of the FPV system. I should be good to purchase the iFlight patch antenna, correct?
@MadRC3 жыл бұрын
100% no issues.
@luckymefpv3 жыл бұрын
Hello, I’m a little confused. I have a set of the v2 goggles with truerc stubbies and the iflight crystal patch. Can you please tell me the intended patch and Omni locations if I only fly with the air units and vistas. Thank you
@MadRC3 жыл бұрын
Opni on top, patches on bottom with the V2
@Freebird_673 жыл бұрын
@@MadRC thought that was best for V1's. Thata been my findings in testing. I also have both sets
@krisgleave Жыл бұрын
Hi Ian, I think I’ve asked this before on steam and you said it would be interesting to test. I’ve just got my iflight crystal HD patch and fitted to my V2. I’ll be flying the DJI Avata mainly however also have the Nazgul Evoque and Cinelog25 that I will fly too. How will this patch work with the Avata? I don’t fancy switching the faceplate everytime I want to fly. I have the iflight patch and 2 stubbies they supply. But heard about they’re not 2.4? Does this mean I can’t use these at all with the Avata and controller 2 / motion controller? Or do I use the two patch but put 2 of the stock DJI antenna on the top for example instead of stubbies to resolve? Or so I literally have to switch faceplates? I know I can’t be the only one thinking this so if you know the answer brill. Unless of course it’s a good video idea for you too? Either way would love your help thanks.
@chrisnrs354 Жыл бұрын
any update? im in the same boat brother
@krisgleave Жыл бұрын
@@chrisnrs354 I think using the crystal patch with the Avata you’ll get worse range but don’t know how much. I’d love to know. I’ve just been unscrewing the antenna but leaving the patch actually on the goggles and screwing on the old ones but defeats the object. I guess it’s just trying but I’ve only used once as not been out with my drone yet
@DronoTron3 жыл бұрын
Super useful info, thanx for sharing!
@MadRC3 жыл бұрын
Glad it was helpful!
@ShermanKenB2 жыл бұрын
So with the V2 goggles, if I'm using say crossfire for my control link, then does that mean you effectively only have the two RX antenae working and the other two are not used?
@MrLootshoot3 жыл бұрын
Ian i'm running my patches on the bottom and getting better results that way?
@spaceportseven3 жыл бұрын
me too, on v1 goggles. getting upto 1.5km even on 25mw , if it works dont fix it lol
@outlawfpv37923 жыл бұрын
I'm getting poor reception with my crystalhd patches on the bottom stubbies on top....tried 700/1000/1200mw.....haven't tried them on top yet but I will.
@MUNKYFPV3 жыл бұрын
Me too but I haven’t actually tried running both the crystal patches on top, I tested a single patch in different locations and it seemed to work best on the RX only spot so I put the crystals on the bottom when I got them.
@outlawfpv37923 жыл бұрын
@@MUNKYFPV most that I have seen are mounted on the bottom.
@BBSlats3 жыл бұрын
@@outlawfpv3792 Is that the same with the V2
@robi57223 жыл бұрын
Hi, nice video but if you should specify if you refer to left and right looking at the video or at the real left and right of the goggles. As you did is confusing because you are speaking as if you were in a mirror switching left with right but the image showed has opposite written words. Check it.... so which are exactly the antennaes rx and tx? The ones showed or the ones you speak of. There's a lot of confusion out there about this DJI antennas.
@MadRC3 жыл бұрын
Do the images not make it clear ?
@robi57223 жыл бұрын
@@MadRC yes the images are clear, but for example at the end when you speak summarising without the images one might fall in confusion... by myself I think about left and right wearing the goggles and not looking at them. So you confirm that the images are the correct reference? You might add a notice to let the video become perfect.
@phocusrs3 жыл бұрын
Thanks for the review, but I don't understand how they managed with their own antennas. If your assumption is correct, how can the antennas can be tuned for 5.8 and 2.4 at the same time?
@MadRC3 жыл бұрын
it will be a dual tuned element but will be interesting to see
@phocusrs3 жыл бұрын
@@MadRC having a linear antenna tuned for 2.4 and 5.8 you'll loose nearly 3dbi. So it will work but I hope that dji addresses this degradation with something. Otherwise the reception will be worst than the V1 goggles.
@AGodwin3 жыл бұрын
@@phocusrs Maybe we can just use v1 tuned antennas and it just wont work in 2.4ghz mode?
@deeph46 Жыл бұрын
Are there any advantages using all stubbys to all connectors?
@MadRC Жыл бұрын
Your better with two patches and two omni overall.
@b.a.d.psychofpv12743 жыл бұрын
How I see the v1 has better reciever system for long range with air units? Would be not be better to púť the patches on both rx on v2 to get better range?
@DeanF3 жыл бұрын
Thanks for all the great in depth videos! IOrdered mine two days back-Love my first edition, but have issues linking my Dji controller to Caddx Air lite unit with many boards. Any thoughts?
@DeanF3 жыл бұрын
LOL! 😂 Like anyone would notice the difference!
@MrSabram072 жыл бұрын
Is there a way to confirm the output wattage of an air unit or a Vista unit? I mean if it says 1200 mw on my OSD does that guarantee that's what it is? Sometimes I feel like 1200 mw is not much better than the 25 milliwatts and I'd like to confirm that my hack is working. Please help me
@Freebird_673 жыл бұрын
My NEW V2 goggles keep rebooting!! My V1’s have been solid but as of now I’m not flying my V2’s until I get a fix.
@MadRC3 жыл бұрын
Try downgrading in FPV mode to the list firmware via assistant 2.
@Freebird_673 жыл бұрын
@@MadRC I’m a little confused. I’m currently on 0606 firmware for diy drones . I don’t own the Dji fpv drone. So I’m currently on and stay on DIY mode. So what’s downgrading going to do? When I plus the V2 goggles into DJI assistant2 it says current. So may need a little more information than what you mentioned. Thank you though
@Freebird_673 жыл бұрын
I just had another blackout to Dji logo about an hour ago. I’m pretty pissed at this point because these have destroyed 2 $400 DIY quad now.
@dronejunkiefpv95563 жыл бұрын
Thanks for sharing mate
@rubenvaneupen73273 жыл бұрын
On an analog setup one would typically go for a directional and omni antenna combo on the rx only mounts. Same for DJI goggles v2? And then for tx mounts also directional and one omni I guess?
@scottsassafraz19803 жыл бұрын
Are we risking any damage to our V2 goggles by using 5.8 only antennas? Or is it OK? I've been coming across mixed messages. Thanks
@MadRC3 жыл бұрын
No chance of damage if your staying in FPV Mode and 5ghz. If you were to go to 2.4ghz then SWR would be crazy however again o don’t think there is much chance of damage. DJI protect these things very well.
@repaid13 жыл бұрын
Good content, thanks Ian
@pooljunki13 жыл бұрын
Nice info mad
@IgnoranceParanoia3 жыл бұрын
I've always had my patches on the bottom 2... so that means either: patches on rx/tx & rx or omnis on rx/tx & rx/tx???
@HirschJunge3 жыл бұрын
Same, Joshua Bardwell tested it and it is better.
@Freebird_673 жыл бұрын
@@HirschJunge I do as well run patches on bottom two ports on my V1'S. On my V2'S I haven't found any good antenna placement and just kept the OEM' antennas on the V2
@sheapyfpv82243 жыл бұрын
What is best placement for iflight patch attennas and the stubbys? Patch on top and stubbys on the bottom best combination?
@MadRC3 жыл бұрын
Top left and bottom right on The v2 from the front.
@sheapyfpv82243 жыл бұрын
@@MadRC thanks that's great and then opposite corners for the stubbys?
@findler3 жыл бұрын
@@MadRC PATCHES on top left and bottom right, right? :)
@ferdinandoantinoro3 жыл бұрын
Very informative, thanks. I would to ask if the V2 maintain the fixed tx-rx (not diversity) behavior also when rebooted in air-unit-mode (not DRONE mode). Do you suggest to use V1 antennas on V2 goggles when fly in air-unit mode ? Many thanks.
@Freebird_673 жыл бұрын
NO! Only use OEM antennas on V2'S. I've been testing this for months now. I have both V1 and V2 goggles and prefer the V1's. V2 was designed around DJI's fpv drone and the AirUnits was an afterthought really. V2'S work GREAT with the Dji FPV drone though because hell that's what the V2 was really designed for. V1'S actually have switching which imo is best for AirUnits and Vistas
@ferdinandoantinoro3 жыл бұрын
@@Freebird_67 Thanks for answer. I’ve thinked to use the V1 antennas on V2 because when used in air-unit-mode seems goggles use only 5.8 bands, so why don’t use 5.8Ghz antennas ?
@Freebird_673 жыл бұрын
@@ferdinandoantinoro you would think that's way it works. I had poor performance when using anything but stock V2 antennas on my V2 goggles so I just left them after trying all different options of antennas on the V2'S by using different antenna ports swooping top left to bottom right and so on but never had good results.
@erlandfpv2 жыл бұрын
@@Freebird_67 hi there, you're probably wrong how to handle and use the 5.8ghz antenna to V2 googles im using air unit and vista, and running well 6.5km aways without any issue ^€^ better learn more. Thanks.
@Freebird_672 жыл бұрын
@@erlandfpv I run iflight Crystal on my V2 set now on bottom ports and seems to help a little but very directional
@skygroover66923 жыл бұрын
I'm new to hd, is there anyway I can connect my goggles (dji v1) to a monitor or tv
@33narim3 жыл бұрын
very nice work. thx a lot.
@brandonwoodford5793 жыл бұрын
Does the 1200mw hack still work on the v2?
@bakkiepleur_FPV3 жыл бұрын
Yes
@YooperFPV3 жыл бұрын
Antenna orientation I still get better range with patches on bottom and omni on top on my V2... this makes since since the goggles no longer diversity switch it just uses all the antennas and it will just use the longest range ones it can as long as your facing the quad. If you put the patches on both the TX antennas yes the quad gets your signal but you don't get the video feed as good, or you could just put patches on all of them.
@MadRC3 жыл бұрын
remember everything is subjective compared to your situation , overall for most patches on the bottom behaves best but it wont be for all use cases. having patches on the bottom means you have the best of both worlds, one receive and one transmit, the same then stands for the omni
@metoo39183 жыл бұрын
What is being transmitted by the goggles to a Vista?
@BuddsSkyCam3 жыл бұрын
How do you get it to display on a smart phone?
@Life_a_bike3 жыл бұрын
What about audience mode? Can I use a V1 in audience mode with a V2 as pilot goggles? Or the other way around?
@MadRC3 жыл бұрын
Yep absolutely.
@doom3crazy3 жыл бұрын
Are you saying v2 will have slightly better transmission?
@Freebird_673 жыл бұрын
V2 imo doesn't work as well as V1 with AirUnits and Vistas. V2 will work fine with AU and Vista but the V2 was more designed around the new FPV drone and its rx/tx.
@doom3crazy3 жыл бұрын
@@Freebird_67 that’s all hearsay. And also false. There’s been plenty of videos comparing v2 and v1. When using after market antennas they function the exact same with the exact same range. When using stock antennas the v2 have slightly less performance because they’re dual band antennas(5.8 and 2.4) vs the v1 that was just 5.8. Hope that clears things up for you.
@Freebird_673 жыл бұрын
@@doom3crazy I understand your argument but certainly disagree. I own both V1 and V2 goggles and see first hand the V1'S perform better. Especially with patch antennas. Sorry to disagree..
@doom3crazy3 жыл бұрын
@@Freebird_67 I also own both the v1 and v2. Are you sure your v2's arent broken? How do you have your antennas oriented? The transmission system is slightly different so you have to place your antennas differently but I promise you, they're identical. I've taken them out pretty far with the same antennas and they are exactly the same. The v1 might have "diversity" but the v2 not having diversity wouldnt change the behavior that much. You just instead have 2 antennas constantly receiving and 2 antennas transmitting. I've watched a number of videos and I don't see that theres any real world difference. Do you have a specific example I could try and recreate cause when I fly them side by side(with friends) everyone says the same thing. " I cant tell a difference"
@Freebird_673 жыл бұрын
@@doom3crazy just curious, On your V2 goggles where are you installing the patch antennas and where are you installing the omni antennas. Without me saying how I installed mine.
@marcnh333 жыл бұрын
I like to know how to connect my Crystal patch antenna on my DJI FPV Goggle V2. On the V1 the patch antenna is connected to topleft and topright SMA connectors wich are both TX/RX On the V2 Goggles on the topleft is TX and topright is RX Where to connect my patchantenna? on the TOP so 1 is for TX and 1 for RX ? Or crosswise to connect both patch antennas to RX or maybe TX ??? I am not sure where to connect, on this moment i have connect on TOP so 1 antenna for RX and 1 antenna for TX. I have tested it yesterday but i doubt if this is the right configuration. I hope you can help me with this TNX Best Regards, Marc
@MadRC3 жыл бұрын
On the V2 best is on both bottom ports overall.
@marcnh333 жыл бұрын
@@MadRC Tnx i will try, on another ytvideo a guy had tested it and he was getting the best result with both patch antennas connected to tx, sound a bit strange but i will try both options, tnx for your reply! kzbin.info/www/bejne/iKGvd6mvhLCDntE
@verdi60922 жыл бұрын
Hi, if i only fly vistas should i get the v1 or v2 since v1s are true 5.8s?
@MadRC2 жыл бұрын
It’s a choice of either. If you can get cheaper V1 go for it.
@skarebsuper3 жыл бұрын
how do you change between setup 1 and setup 2 for the version 1 FPV goggles?
@MadRC3 жыл бұрын
You can’t. It’s done automatically based on signal.
@skarebsuper3 жыл бұрын
@@MadRC cool. I didn't know. Thanks!
@Danscraigslist653 жыл бұрын
What the heck is a E-Unit? New Dji FPV arrives tomorrow if my V2s work on some sort of cheap flyer I am interested, is that what a e unit is? Thanks
@mort79873 жыл бұрын
It's Air Unit (the dji brand camera) it's just his accent
@sheapyfpv82243 жыл бұрын
Would the iflight crystal attennas be good to use on V2 version?
@josefdahari3 жыл бұрын
That's what I'm curious since I just got the v2 with crystals and don't know where to connect them
@sheapyfpv82243 жыл бұрын
@@josefdahari how are your iflight crystal attennas working on your V2?
@josefdahari3 жыл бұрын
@@sheapyfpv8224 so far so good I haven't gotten any issues so far at all. Not even slight pixelation yet either. But I'm waiting for more reviews on the antenna placements to know if they are fine on top or if I should put them on bottom. I'll try to run all Stubbies and see
@Chio_OB3 жыл бұрын
Brilliant, if only you could actually buy them...
@cristianperez11203 жыл бұрын
So yeah i had the same problem but i downloaded the dji app on my phone and every day i checked 2 times a day and then when they restocked a month later i was ready to buy one but they run out fast
@DazzieBeire3 жыл бұрын
Direct from DJI.... All four antenna are rx top two are rx and tx on V2 and currently the app to watch using USB-C is not available. They told me I would still need smart controller.
@jopro_fpv3 жыл бұрын
wait what did they say about the antennas?
@bneil40593 жыл бұрын
Will new dji FPV drone be compatible with V1 goggles?
@MadRC3 жыл бұрын
No as it’s dual band.
@MUNKYFPV3 жыл бұрын
Interesting, some of the best information I’ve seen in these goggles. I have the iflight crystal patch on the V1 goggles both connected to the bottom so I have a patch on the RX only and when I tested using a single patch antenna that’s where it seemed to give me the most range. I haven’t been able to find clear info on how the receivers in the goggles are working. So you are saying the V1 goggles are always using antennas 2 and 3 and then choose a third antenna switching between 0 amd 1? So confusing but they work great.
@SirCrashaLot3 жыл бұрын
running the same config. performs great but I have not pushed the range yet.
@Freebird_673 жыл бұрын
I've made 6 Miles in open countryside with single triple feed antenna 9dbi on bottom right port. I also run my Iflight Crystal patches on both bottom ports and get decent results. My V2 though, I've found adding anything but what they came with makes reception worse. So I just keep OEM antennas on my V2 for spectators to watch my flights. I actually prefer the V1 goggles if you are not buying the DJI Fpv drone you are better off with the V1'S
@kurtzFPV3 жыл бұрын
Will the v2 work with DJI camera drones?
@MadRC3 жыл бұрын
sadly no
@kurtzFPV3 жыл бұрын
@@MadRCThanks. I have a V2 on order and was hoping but not expecting it.
@sharathkumarsampangi53323 жыл бұрын
Hey mate, Could you add the v1 & v2 model numbers? I don't know which one I own now.
@dondupuis55242 жыл бұрын
So where do you connect the patch on V2 for 5 gh
@MadRC2 жыл бұрын
Use bottom on both.
@dondupuis55242 жыл бұрын
Thank you, great video, I was a little confused, in the pictures on your slides you referred to antennas left and right as they were facing us, when you show the actual goggles with you sitting behind, you did the opposite. You Hope that makes sense Thanks for such a quick reply. Looking at lots of KZbin videos on the DJI googles, you are the only one that explain the change in v1and v2 antenna differences.
@TobiasFeuerbach3 жыл бұрын
Where do i put my best Antenna? On the RX Ports?
@MadRC3 жыл бұрын
The overall consensus is yes on the RX ports but it’s going to depend on your flight style and location.
@disco.volante3 жыл бұрын
Ok, so when using with the FPV system is there less functionality with the V2 or does diversity just work differently?
@MadRC3 жыл бұрын
Just diferenty, it’s preset combination rather than switching.
@doom3crazy3 жыл бұрын
@@MadRC in theory the v2 should have a more balanced transmission, right ?
@AGodwin3 жыл бұрын
@@MadRC Im still unclear on this. Does the v2 use 4 antennas at once now, or is there still 3 active and its turning any of the 4 on and off?
@jopro_fpv3 жыл бұрын
@@AGodwin its all 4 at once
@Freebird_673 жыл бұрын
@@doom3crazy not necessarily
@danfallbacher55073 жыл бұрын
So much for video out if you are running the air unit or vista; it doesn't work. Only works with the DJI FPV drone!
@hamadmusabeh3 жыл бұрын
thx for the info , i just got the V2 its on a new firmware (V01.00.0604) but has an empty change log i didn't find any information on how to get video out from the goggles to a smart phone can you share how to do that , thx
@MadRC3 жыл бұрын
That is a future feature that’s not been released yet. It’s not confirmed when.
@MadRC3 жыл бұрын
The update fixes an issue with some minor adjustment on the display. Nothing major as well.
@jackrlanois3 жыл бұрын
@@MadRC Any idea if the update prevents the usage of the 1200mW hack?
@MadRC3 жыл бұрын
@@jackrlanois no I believe it still works.
@welldyhans053 жыл бұрын
if i. usee the iflight crystall hd is it still useable for the dji drone?
@MadRC3 жыл бұрын
Yes and no , if you force the drone to single band 5ghz yes otherwise no.
@welldyhans053 жыл бұрын
@@MadRC one more question, i mostly fly for long range, is it still have a good range for the the dji fpv drone if i only use single band 5.8 ghz ? or maybe i just need to wait a new dji antenna patch release? thanks for answering my question, youre video very helpfull
@MarshTh3 жыл бұрын
Has anyone come up with a good answer on how to set up V2’s with iflight crystal patch and stubbys?
@MadRC3 жыл бұрын
I’d go standard and see how it behaves.
@MarshTh3 жыл бұрын
@@MadRC ... meaning stock antennas ??
@MarshTh3 жыл бұрын
Or iflight Crystal patch on bottom stubbys on top ?
@DarrenAllatt3 жыл бұрын
Probably bottom.
@Mike-fm3km3 жыл бұрын
HEY BUDDY! WHY DONT YOU make an updated video now that the dji fpv drone is out... if someone has both systems the dji fpv drone and the dji unit whats the best middle ground antennas that works with both.. becouse the stock ones kind of suck with the air unit
@kamgal94pl393 жыл бұрын
Not compatible with Caddx Vista?
@MadRC3 жыл бұрын
V2 and V1 are compatible with both air units.
@josefdahari3 жыл бұрын
So I'm still confused. On where I should connect my iflight crystals to the top of bottom ports or mixed up. On the v2s
@MadRC3 жыл бұрын
I would try it on the top two and see how performance is. If not good try the bottom left looking at the front. The problem is we don’t know what’s going to be better at this stage due to we don’t know much much the V1 switched between modes. It’s going to be a game of trail and error.