Make your own Assetto sound mods!

[@pschroeterps]

OMG man, just found this while doing sound research for my E31 project. Kudos for putting it out and sharing it. Rock on!!

[@ipo7596]

the load doesn't have sound yet because you have to tweak the throttle knob above to simulate gas pedal percentage. And then you'll hear the load track.

[@HueWave]

i have developer mode on and i get the option to extract the kn5 but nothing about extract the sound

[@Evil-La-Poopa]

i finally figured it out to leave the sounds with their own settings. But do u know how the spatializer or 3D panner can be adjusted? Because right now, no matter which setting in the 3D panner i change, the sound is still 360 degrees. how can i get a mono sound?

[@PanderingSlats]

You could try an audio editor to make the mono file into stereo; I suggest ocenaudio

[@darkmagicians62]

I made a Chevrolet 250 (inline-6) sound mod following your tut, it helped a lot! Keep up mate!

[@Conan2433]

I don't have that option in content manager even though I turned on developer mode.

[@protomor]

make sure fmod related plugins are installed. settings -> content manager -> plugins -> anything that says fmod. Or just check all that stuff. Can't hurt.

[@TheSt0n3y0ni]

OMG thank youuuuuu Yoshi!!!! I've been digging around trying to figure this out for my e34 build, I can't find a car mod with the engine sound I want 😅

[@AmauryChihuahua]

help I dont have extract sound button with dev mode on

[@protomor]

There's an fmod plugin on the content manager settings you need to install too

[@michahund4879]

@@protomor where and how?

[@protomor]

@@michahund4879 on the top right of content manager there's settings for cm. Plugins should be in one of them.

[@protomor]

@@michahund4879 hit the triple hamburger and go cm settings. Then on the left side of content manager should be "plugins". Basically, check all the boxes.

[@Cinque27]

​@@protomorI think they removed it because in developer mode I also don't have it. Such a shame..

[@PanderingSlats]

I tried a couple newer versions with the template to see if they might work, and I think 1.08.30 (final revision of version 1.08) could be the ticket.

[@altarf82]

Hi Yoshi, Would you be able to help with implementing the FMOD to game please?

[@BuggsOp]

Nothing happens when I press extract sound, just a small window, then it disappears. I have the Fmod plugin installed

[@BuggsOp]

I figured it out turns that some mods are encrypted lol

[@vucci1670]

tysm you just saved hella hours of work for me!

[@protomor]

Glad I could help!

[@LucasGaly24]

Hello mean , it s possible to do the sound of my mod if i send the mod ?

[@protomor]

No sorry. I know how to do this but I'm not very good at it.

[@darkmagicians62]

Hey Yoshi! I could not see which filter you used at 6:32, below Sidechain TY EDIT: I turned Closed Captions/Subtitles on to see it

[@EmrahAlman]

Hey bro. Thanks for the vid. Random Q - When I try to Export the Guids I get the error: " Studio was unable to write the project's GUIDs to "D:/SteamLibrary/steamapps/common/assettocorsa/sdk/audio/ac_fmod_sdk_1_9/Build/GUIDs.txt". You have any idea why this would be?

[@EmrahAlman]

Update - for some reason my permissions wasn't set on the D: folder. My mistake lmao

[@romuloarrudaa]

Hey Bro! Loved your video! Imhaving an issue with content manager, because even on developer mode, the option to extract sound doesnt show up for me, do you know what can cause this?

[@protomor]

You have to make sure the FMOD stuff is enabled. Under the content manager plugins, make sure everything is checked and downlaoded. That's usually the issue.

[@romuloarrudaa]

@@protomor Youre right, just found it here, thanks!!

[@romuloarrudaa]

@@protomor Just one more question please (wich I prob already know the answer) but, what I wanted to do is to add a transmition whining sound for a already existent RSR 2017 sound mod made by ACFAN, but im getting into the conclusion that even with all the sounds already extracted, I dont have the actual Fmod Project from that sound mod, wich means that I would always need to build the .bank from scratch and not just add something and export the .bank, right?

[@protomor]

@@romuloarrudaa sadly yea. Gotta make it from scratch

[@romuloarrudaa]

@@protomor Thank you very much!

[@stylecar3697]

Hello, first of all I would like to thank you for teaching how to create sounds for cars. Could you tell me how I set the engine noise when you have the camera in front of the car?

[@protomor]

There's two sets of sounds, one for inside the car and one for outside. You want the outside.

[@protomor]

Somehow, no one has made fun of my haircut. Wtf was I thinking?

[@jehsizb]

Do you know how to encrypt bank files and guids.txt to share a mod please ?

[@protomor]

I never did figure that out. If you do, please let me know!

[@art__3842]

i dont have that tatuufa1 folder or any other folder or event..i did get the right version someone help please?

[@protomor]

I forget where but it's a default install folder in the dev colder.

[@KeepMoving_Forward]

Awesome I would to get wav files for a Chevy pickup truck old school distributed 305

[@raoulraoul7129]

Hello,where can i download Fmod 1.08.12? Is not on their website,this version is old.EDIT: DAmn it, i found it, it was on their website but i had to scroll to the versions history panel. 🤣

[@d1mobilegaming667]

for some odd reason i couldn't download fmod cause i got banned the moment i went on the site idk why.

[@protomor]

Maybe try a VPN?

[@stylecar3697]

very thanks !

[@durmiss]

konichiwassup to you too lol thanks for the tutorial, helped out a ton!

[@ITS_ALZ]

hey bro if ur interested in making some sound mods let me know $$$