I only now found your channel... love your work and ideas! Congratulations and keep going! Thank you
@JeffLafferty8 жыл бұрын
Your a super genius dude!
@edupuertasfruns8 жыл бұрын
+Jeff Lafferty hope I was that talented, I do my best and lots of times I fail, jajaj. Thanks
@SabrinaVideo7 жыл бұрын
Joder. Ya era hora que hubiera alguien que hablara un inglés tan claro y sin matices raros. Jajajajaja. Un saludo
@edupuertasfruns7 жыл бұрын
y con tanto acento😋
@KWHCoaster3 жыл бұрын
Mmm, you have me looking at my old scanner that works, but not with Win10. I might able to harvest parts to motorize my Kamerar slider.
@madmikster858 жыл бұрын
awesome video, I was so frustrated until I found this video, thankfully I had a printer laying around, you just got a sub and share, keep it up, great quality!
@simontween7 жыл бұрын
This is in serious need of the A Team soundtrack over the top
@edupuertasfruns7 жыл бұрын
+Simon Tween I grow up with them and Mcgiver
@chronosproduction2 жыл бұрын
Amazing works. How do you get the dragonframe to do live video on an arduino? Thank you
@edupuertasfruns2 жыл бұрын
Hi, it is not live in fact. It works only for stopmotion
@chronosproduction2 жыл бұрын
@@edupuertasfruns thank you
@diffo828 жыл бұрын
Genial resultado, no sabía que dragonframe ya traía scripts para controlar arduino, una gran sorpresa. Podrías describir el material que usaste para conseguir el sistema panorámico? Tengo un slider funcionando para timelapse y me gustaría añadirle esa posibilidad. Un saludo!
@edupuertasfruns8 жыл бұрын
Hola, en realidad casi todo el material usado para ello proviene de impresoras viejas. Engranajes y correas, plastico.... La única cosa comprada son algunos rodamientos para permitir un giro suave de la cámara.
@danusaouai6 жыл бұрын
Hola y gracias por tus videos! I would like to know if it's possible to make a moco slider with the motor of the printer? It's a step by step motor, no?
@edupuertasfruns6 жыл бұрын
Yes it is possible, normally it is a stepper motor and it is great for animation sliders.
@danusaouai6 жыл бұрын
great! thanks for your answer ^^
@NeedToDIY4 жыл бұрын
awesome video! I'm working to do the same with DC motor but have not your mechanical skills :(
@edupuertasfruns4 жыл бұрын
Search on KZbin, there are plenty of channels about that
@puspis8 жыл бұрын
Hola Edu, llevo varios días viendo tus videos y, a cual más trabajado. Es increíble, no solo las cosas que haces, si no como lo haces y ni me imagino el tiempo que emplearas en editarlos y mostrarnos el resultado en unos pocos minutos. Mi enhorabuena! Yo tengo un par de videos con arduino controlando motores a pasos, te invito a que los veas, eso si, ni por asomo mis videos tienen el trabajo que dedicas a los tuyos. También es verdad que cuentas con otra gean ventaja y es el taller y las máquinas de que dispones (esto es envidia :-) A partir de ya, cuentas con un seguidor más. Un saludo, José María.
@edupuertasfruns8 жыл бұрын
+Josema G. Hola, me alegro que te guste, si dedico mucho tiempo a ello. He visto tus vídeos, el slider super suave y la màquina làser, con ella tambien me das envidia, jaja. Te voy a seguir, a ver si haces alguna maravilla con ese làser. Saludos
@shanmichaelreyes62557 жыл бұрын
hi sir can ask you if there is a chance that you can tell all the materials that you use for this thank you sir
@edupuertasfruns7 жыл бұрын
Hey, you have here the kit I use, the other parts are from old printers kineticarmatures.com/product/motion-control-kit
@shanmichaelreyes62557 жыл бұрын
thank you sir your awsome
@breadbotnik8 жыл бұрын
I noticed your using a CNC shield, did you have any problems with the pin numbers of the shield being different from the Dragonframe sketch?
@breadbotnik8 жыл бұрын
I mainly ask because I think I ordered the same shield and I'm having problems getting motors to move Dx
@edupuertasfruns8 жыл бұрын
+Beardbotnik they are different so you need to modify the code to make it work
@edupuertasfruns8 жыл бұрын
+Beardbotnik then could be another thing also, you need to put a jumper on the enable, I remember that took me weeks to figure out
@breadbotnik8 жыл бұрын
Thanks! Any tips on modifying the code? I thought I had it figured out and I put a jumper on enable and I can't get my motors to move. My shield looks almost identical to yours and I think my motor step and direction pins are like 2/5, 3/6, 4/7, 12/13 The only section in the code I need to edit is the part below "// setup motor pins - you can customize/modify these after loop // default sets step/dir pairs together, with first four motors at 4/5, 6/7, 8/9, 10/11 // then, for the Mega boards, it jumps to 28/29, 30/31, 32/33, 34/35" right?
@edupuertasfruns8 жыл бұрын
Let me check the code when I have a little time.
@minifoodworld12804 жыл бұрын
nice video sir
@redsuitheart7 жыл бұрын
Edu... hay algo que no sepas hacer? cómo tienes tiempo para aprender y hacer de todo? me sorprendiste bastante. o.o
@edupuertasfruns7 жыл бұрын
+redsuitheart en realidad me falta tiempo a diario... No llego a hacer todo lo que me gustaria
@redsuitheart7 жыл бұрын
Te admiro mucho y eso que apenas hoy vi tu primer video :)
@Lyovka88 жыл бұрын
What software are you using on your laptop for stepper motor control?
@edupuertasfruns8 жыл бұрын
Dragonframe
@esotericsean8 жыл бұрын
What are the best types of motors to use? And are you using an Arduino UNO? Any recommendations on which one of those to buy? Thanks!
@edupuertasfruns8 жыл бұрын
Arduino Uno to control 4 motors, Arduino Mega to control 8 motors. Motors must be stepper motors, depending on the weight or force they must suport, will be Nema17 or Nema23 or a lot of types more. The crucial point is the motor driver. If you go for a motor higher than 2A, you will need a stronger Driver. I will make a video soon about the electronic setup I use in this video if you want the references.
@ghoulstonedafodil8 жыл бұрын
hey edu, this vid is really great! very cool channel! i'm just getting into this stuff myself. i would love to see more about the electronics you used here!
@edupuertasfruns8 жыл бұрын
+Jack Carder I will talk about components on next vídeos.
@bernardfricot93398 жыл бұрын
Jack Carder
@VIProach8 жыл бұрын
cool, need to get this also
@gregorp38218 жыл бұрын
What program do you use to control it?
@edupuertasfruns8 жыл бұрын
+Григорий пол Dragonframe
@magdanoz888 жыл бұрын
Does this software supports Arduino Mega + Ramps board?
@edupuertasfruns8 жыл бұрын
+magdanoz88 yes it suport mega but to use a Ramps you will need to modify the code in Arduino. I did it for this cnc shield as well
@magdanoz888 жыл бұрын
Thanks, Edu! Your reply was very helpful!
@admiteco7 жыл бұрын
!You are awesome!!!
@JuanSebastianGomezGiraldo7 жыл бұрын
Hola, increibles videos, de dónde eres?
@edupuertasfruns7 жыл бұрын
+Juan Sebastian Gomez Giraldo Barcelona
@pierdolio8 жыл бұрын
What color is the "Moco" ?????
@edupuertasfruns8 жыл бұрын
+Adam Pierce fluor Green, uaahahahaha
@rynogameover8 жыл бұрын
hi there edu! first of all, thank you, your videos are inspiration to me and even if i am into different things i would totaly love to reach this! i got everything set up and it's fully workin but i am not a real programmer and i found a serius problem on this specific configuration that i can't solve, it would be awesome if you can help. using the cnc shield on this video i found dragonframe not warking becouse different pin layout on the cnc shield v3 we got, when i saw you happy because it was working i tought you have found how to change them. i could't solve it becouse of dfmoco code which work with serial ports and not define pin..... i hope i saw it right and you have all the answers, it would be great for everyone tring to make this. thanks and keep up the good work!!
@jimmy_colombia8 жыл бұрын
+1 Por favor puedes mostrar el código fuente del proyecto
@edupuertasfruns8 жыл бұрын
Yee, el codigo no es mio así que no puedo pegarlo aquí, es el codigo para Arduino que viene con el software que uso para animar, Dragonframe. Si consigues ese software en una de las carpetas instaladas en el ordenador encontrarás el código fuente para operar motores paso a paso.
@faktordj6 жыл бұрын
@@edupuertasfruns jajaja osea si pero no... vaya!
@LarissaPerfeito4 жыл бұрын
Oh, My... Parabéns.
@latabernaderufinoltdr82537 жыл бұрын
me encantan tus videos. mi sueño tener un taller como el tuyo
@edupuertasfruns7 жыл бұрын
+LA TABERNA de RUFINO LTdRUFINO gracias, todo es empezar y poco a poco ir ampliando, como todo hobbie
@brotschuh8 жыл бұрын
This is a nice idea, but I think the motor is too loud for live camera action. Never the less: SUB :)
@jordiferriscastell41348 жыл бұрын
Fantástico. Resumo tu vídeo y lo cuelgo en nuestro facebook. Evidentemente, te nombro y pongo link al vídeo completo.
@edupuertasfruns8 жыл бұрын
Genial que os guste!
@jordiferriscastell41348 жыл бұрын
Es fantástico. Te paso link a lo que hemos publicado. Cambio-quito-borro-rectifico cualquier cosa que no veas bien. Saludos. Jordi. facebook.com/seniainformatica/videos/1006233336159240/
@Whetzell8 жыл бұрын
Hi Edu! I love your videos. You're very inventive and always seem so positive! This is what I want from a motion control setup -I just need a single axis for now -I want to be able to key frame and then with each frame the motion advances automatically I have an arduino mega with a stepper motor, I know that is the first step. I then found this on amazon. I never considered a worm gear, I always thought a belt drive was the only method on a budget. Will this item work for what I want? www.amazon.com/gp/product/B0197QCQM2/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A16P4TUM521SQ8 I'm assuming I can just rig a camera mount on top and run an arduino uno to it and connect it via dragon frame. Is there more to it? Thank you Edu! P.S. I'm just a little confused on the functionality and if it is automated or not because on the dragonframe site there is a lot of talk on Real Time vs Non Real Time and I'm not sure what that is exactly. However, it seems like in your sun video that is fully automated.
@PlanetaMaqueta5 жыл бұрын
You are amazing!!!
@RichyVidal8 жыл бұрын
Waw. Això pocs ho poden fer. Entenc que es pot fer, pero no com fer-ho. Així que crec que és un making of, i no un tutorial. Està molt bé. :D
@edupuertasfruns8 жыл бұрын
+Richy Vidal tens tota la raó, no pretenia fer un tutorial sinó motivar a la gent a que faci coses així. Potser no tan maco o perfecte, però fomentar aquesta mentalitat. Merci per comentar. Espero q tot et vagi bé! Ens veurem al festival Stop Motion de BCN? Salut!
@RichyVidal8 жыл бұрын
+edu puertas Doncs sí, que m'agradaria anar-hi al festival. Jo el que no penso fer es destruir una impressora, i encara que em sortís bé, no serviria de res, ja que encara no tinc camera amb live view. He, he.
@edupuertasfruns8 жыл бұрын
Persisteix, segur que l'aconsegueixes. Ens veiem al festival doncs. Una abraçada
@RichyVidal8 жыл бұрын
:)
@Sofiarivassculptor7 жыл бұрын
Eres un genio
@NMA_NoMoreAmmo4 жыл бұрын
Start building robots, forget that animation.
@lkimamehdi7 жыл бұрын
I guess you had a bad time to remove the ink from your hands
@edupuertasfruns7 жыл бұрын
Well... not bad but smelly, jaja
@Gantzz3214 жыл бұрын
the lack of details shown is a let down. Too bad, this should have been a great channel.
@williamhuang53293 жыл бұрын
Hanzhen harmonic drive gear , robot arm gear reducer, , over 30 years experience ,,
@danielecarmona8 жыл бұрын
Ah! I have to doooooooooo
@edupuertasfruns8 жыл бұрын
Yeeeesss, it is so satisfying
@danielecarmona8 жыл бұрын
I bet! I made a teleprompter and it seems professional :)
@edupuertasfruns8 жыл бұрын
That is interesting, make a video and share it!!!!
@DieselCrewMO-dz6 жыл бұрын
spaciba 6pat :)
@MindChamber6 жыл бұрын
save yourself 500 dollars by making a slider from scratch!! *uses 5000 dollars worth of equipment... lmao.. I kid of course.. youre a wiz
@Schrimschrim8 жыл бұрын
Why the fuck all you KZbin set the Volume of the music so damn loud!!!!! THUMBS DOWN
@edupuertasfruns8 жыл бұрын
Still learning, thanks for your commnent
@motionsick8 жыл бұрын
shared at facebook.com/openmoco
@johntaylor77976 жыл бұрын
Your video won’t play as the ads will not stream. YT is soooo garbage
@edupuertasfruns6 жыл бұрын
Hi, can you explain it? I want to know about that issue
@johntaylor77976 жыл бұрын
edu puertas Hi. When I select a video to watch, my selected video shrinks to a thumbnail size to the bottom right of the screen whilst the adverts usually play. But the ads do not play and this causes my selected video not to play either. I have cancelled my selection and then selected again, but the same issue happens. This does not happen to all your videos but a few of them. Nor does this happen only to your content. I have been experiencing this with other content. I don't know if your other subscribers have experienced this as well. Anyway thanks for asking and keep up the good work. John T