Making LED Resin Dice for D&D

Is it possible to make light-up LED dice without batteries or charging?? Go to buyraycon.com/EvanAndKatelyn for 15% off your order. Brought to you by Raycon. Check out the tools we used below! 👇
🙏 Other sponsors:
TotalBoat: check out the epoxy we use: www.totalboat.com/evanandkatelyn (sponsored affiliate link) (search for high performance)
Glowforge: check out our Glowforge laser cutter here glowforge.com/evanandkatelyn # glowforgepartner
Use the link to get $500 off a Pro, $250 off a Plus, $125 off a Basic
Want behind-the-scenes content? Check out the Aftershow for:
• We show all the dice that didn’t make it to the final cut
• Our "disagreement" on the dice design
• What Evan broke and fixed… TWICE
• Last minute unfortunate discovery about the LEDs during the final dice
• Why we didn't make our own molds
• Why this project took an unusually long time
• What would we change if we were to go back and do it again
If you're a Patron already, watch it here: / wireless-led-67304494
If you’re a KZbin Member, watch it here: • Wireless LED dice afte...
Not a Patron yet? Join here: / evanandkatelyn
Not a KZbin Member? Join here: kzbin.infojoin
TOOLS & MATERIALS (affiliate & *sponsor links)
TotalBoat Resin* www.totalboat.com/evanandkatelyn (search for high performance)
Glowforge* glowforge.com/evanandkatelyn
Mini Wireless LEDs amzn.to/3vJZ08h
Wireless LED coil bundle amzn.to/3N3prNF
Wireless LED coil (alternative source) www.adafruit.com/product/5141
Dice molds www.etsy.com/listing/11613727...
Tiny dice mold www.etsy.com/listing/77614552...
Alcohol ink amzn.to/3k1a4Ix
Pressure pot amzn.to/3K18XmF
Masks (sticker shock warning) amzn.to/3MkMBOC
Velvet amzn.to/3MolzpG
All our favorite resin supplies www.amazon.com/shop/evanandka...
🛒 Our favorite tools/materials on our Amazon page: amazon.com/shop/evanandkatelyn
🛠️ All our favorite tools: evanandkatelyn.com/tools/
Want more E&K videos? We have more channels:
🎮 Gaming: / evanandkatelyngaming
🎙️ Podcast: / evanandkatelynpodcast
🎮 Gaming Uncut: bit.ly/ekuncut
👫 E&K 2: / evanandkatelyn2
👫 E&K Uncut: / @evanandkatelynuncut
📺 Twitch live streams / evanandkatelyn
SOCIAL/SUPPORT LINKS
💵 Patrons can watch our Aftershow here / evanandkatelyn
👕 Merch shopevanandkatelyn.com/
📸 Instagram & 📣 Twitter: @evanandkatelyn
💬 Discord / discord
👽 Reddit / evanandkatelyn
🎥 FILMING GEAR (affiliate)
bit.ly/eandkfilminggear
🎼 MUSIC
Waltz of Treachery, The Descent, Mining by Moonlight, Matts Blues, Laconic Granny, Marty Gots a Plan, Last Kiss Goodnight, Kool Kats, Investigations, Hyperfun, Hustle, Hep Cats, Final Count, Exhilarate, Disappointment, Doh de oh, Darxieland, Constance, Carnival Intrigue, Aunt Tagonist, by Kevin MacLeod

[@EvanAndKatelyn]

🎲 Want to watch our first attempt at dice making? (they’re fluorescent!) kzbin.info/www/bejne/a2qXZXuIpMmSrJo 😻 Want to get our new Joob plushie? www.makeship.com/products/joobie-plush ALL proceeds go to the Trevor Project! (on sale 3 weeks only)

[@simona54140]

Omg JOOB PLUSH IV BEEN FOLLOWING YOU FOR LIKE 4 YEARS (ME AND MY CUZ). BUT LOVEEEE YOUUUUUUUU😭😭❤️❤️❤️❤️❤️❤️

[@katiea.5793]

Hello! In the past I have tested the balance of some of my dice by dropping them into either water with salt dissolved into it, or water with a lot of sugar dissolved into it. Since these dice may not be perfectly balanced, it might be cool to test their balance on a stream or second video (or just post a quick video on social media)! Note that since these dice may be heavier, it could be difficult to dissolve enough of salt or sugar into the water to make them float. QQA! 😁

[@wifipassword7383]

Resin dice blindfolded

[@EvanAndKatelyn]

@@katiea.5793 We actually did try that but these were so heavy because of the LEDs they wouldn't float!

[@morissaedwards7348]

Ah, I remember being there for the neon dice. That was a fun video

[@eh3010]

I kinda feel that with the dice they've made we 1000% need a Evan and Katelyn D&D stream now

[@kaykay7322]

I would watch. maybe learn how to play along the way.

[@kriki1906]

Oh yes please

[@steven12426]

YEEEEES

[@dominicw8868]

@@kaykay7322 that’s what I was wondering, how are games of dnd played? Are they actually fun? Lol

[@DJVoyagerXue]

And don't forget the medieval towers and other builds they have made ;)

[@laurenbrown9977]

They're seriously stepping up on their sponsorship ad production. Someone give them Oscars.

[@EvanAndKatelyn]

one day we'll be formally recognized for our supreme acting skills in that one Raycon ad on that one dice video...

[@Carlisios]

Not the poscas

[@ktbyrd]

I was gonna say all of their sponsorships don’t interrupt the content and most of the time add to it!

[@davidfagerburg6469]

Made me laugh more than the Superbowl commercials this year

[@LuckyCoinFrog]

Probably the only channel I don't want to skip adds on because they are SO GOOD. lol

[@changingmind3248]

Just wanna point out that the box's border design is absolutely gorgeous

[@georgeh5075]

Ofc... it's got joob on it

[@user-ut3md1tm4e]

Just want to point out that I am a dog person

[@TheDutchisGaming]

The only thing I’m afraid of is that the LEDs might cause the dice to be weighted making the randomness more determined to a set of numbers.

[@pmangano]

The LEDs are probably not that heavier than the resin itself for the effect to be noticeable, in fact they might even be lighter (which would still be a problem)

[@acat9707]

@@pmangano I don't think they were referring to the total weight of the die but more so the weight distribution

[@alliewilliams4050]

Yeah that’s what I was thinking too. Lol Evan and Katelyn making loaded dice for DND. 😆

[@maureenb2002]

@@acat9707 if the leds are about the same as an equal volume of resin the weight distribution wouldn’t be off. If they are lighter it would be a problem.

[@the.other.ian.]

If the centering is off, the steel cubes would definitely affect the weight distribution

[@Sparkies_Quest]

Katelyn: “Unnecessarily steel cubes” Evan: “This is the way!”

[@EvanAndKatelyn]

Anything to justify that portable metal band saw -E

[@nenef5551]

@@EvanAndKatelyn cool emoji!

[@Olliebunny]

Now I need someone to do these “capacitors” with a nautical theme, blues, greens, and bronzes. To emulate that underwater mine theme and be steampunky, I think it’d be awesome for a dnd set

[@OxalisOrSomethingIDK]

that would be so cool omg i want

[@YD_.]

I want this

[@aichitoshiki1321]

Ooooo

[@aspillust]

a set like that would be really cool in one of the current campaigns i'm in, i'd go nuts over that lol

[@MrYaroph]

I think you should have painted the "black" back of the LEDs with chrome paint, to make them less visible (because it would take on the color of the light)

[@randomguyontheinternet5030]

OOO that would be cool.

[@Lady_Hiccups]

I was just about to ask if they should try painting the leds to make them less visible.

[@promotionsonline2836]

If there’s an award for commercials you guys need to get 100000% of all the awards! I’ve never been more excited to be sold on something!

[@k.allen007]

Okay but the way Evan looked at Katelyn when he said "you're smart" was so adorable I might have teared up. Y'all are incredibly adorable

[@TheEliseRodgers]

Relationship Goals

[@crazycrafts3414]

time stamp?

[@vally_mally]

@@crazycrafts3414 16:15

[@alfredfreedomjones5105]

How far technology has come! Those little wireless glowing lights are almost magic🪄

[@bow-tiedengineer4453]

the crazy thing, is that that style of wireless power transmission is some of the oldest stuff in electronics, from way back when they still didn't know that electricity and magnitism were part of the same thing. It's such simple physics, but it's so cool and magical, and seems so futuristic.

[@alfredfreedomjones5105]

@@bow-tiedengineer4453 wow! Thanks for sharing ☺️

[@vermili0n9]

“Any sufficiently advanced technology is indistinguishable from magic” - Arthur C. Clarke

[@bow-tiedengineer4453]

@@alfredfreedomjones5105 your welcome. as an additional interesting thing, it's also the exact same thing as the transformers used in power poles to step down the voltage when going from the big long distance power lines to neighborhood lines, or from neighborhood lines to your house. It's basically just a transformer, except it's being used primarily for the wireless connection instead of for the voltage changing.

[@foegettergames252]

but what's the point of the die is unusable?

[@reincarnatez2434]

I think a much easier solution to get the LEDs aligned would be to just 3D print a jig of a mock d20 or whatever die you wanted, but with LED sized holes cut out in each face, with a small void in the middle. Then, you could just put a dab of hot glue on each LED, push it in, open up the jig, and you'd have a neat little ball you could put into your die mold!

[@CreativityC0rner]

That was what I thought they were going to do, lol. I wonder if there are even smaller LEDs. I’d love to see them do another set.

[@doodlefawn4742]

the little editing with Katelyn's hands going across the stars and them turning into a purple path was such a small editing detail but i love it.

[@CeruleanSeal]

This is without a doubt in my mind, the coolest dice set I've seen in my life. This wasn't even just a fun little maker project like so many other things you've created, this is innovation. You've created the future. Years from now LED dice & trays will become a norm and you empired it here on this d-... 6 week period. I want a set. I also want to see what other colors and combinations could be thought of.

[@Refridgerating]

Look up pixel dice, they had a Kickstarter last year and are in production development at the moment.

[@maureenb2002]

Pixel dice! That’s what you’re looking for. Production is delayed because of the chip shortage but they’re programmable and will show your roll on Roll 20 and D&D Beyond if you play virtual. My DM and I are trying to come up with a way to use them to use the random rolls my cats make when they steal my dice as part of our game once they finally get here.

[@morgiiiklein5385]

I just feel like if you’re not careful you could really easy weight the dice, like the old school cheaters used to in gambling lol

[@Skaos87]

As always I absolutely love it! Idea for a pt. 2 though: Have the LEDs shine outwards (might also look cool as is tho) BUT add some cotton wool around them. I've always loved the cloudy/stormy/fire effects that some achieve by combining these elements. Maybe use bigger die moulds as well?

[@EvanAndKatelyn]

That would be interesting to see!

[@ashenwalls3558]

Ooh this would be amazing, and maybe do a bigger d20 so they can fit more coolness inside!

[@YasmeenKhan]

ooh! I was thinking I want them to make the liquid core dice that you see, and combining those with these leds could be lovely too

[@toparcticwolf]

Also if they could find UV leds and combine that with the fluorescent dice

[@TheLynxer]

This is legit a product. I'm sure you could refine and prototype more, but even as is I would 100% buy this for my own D&D uses. Well done E&K!

[@MakeyJu]

on one hand, I totally wanna play with these dice, they're SO cool on the other hand, no way in hell do they have an even weight distribution now, especially the d20

[@erinpeterson3202]

its actually incredibly difficult to make weighted dice, even when you are intentionally trying to weight them. for play purposes they are fine, i promise

[@jlammetje]

@@erinpeterson3202 can you explain how/why it’s difficult to make a loaded die?

[@nicholaskerwin1538]

@@jlammetje you would have to place a larger amount of weight into an edge or corner for it to tip the dice. the most common way of making a weighted dice isnt actually weight but sanding an area to make it angled, this causes the dice to tip. due to their overall size and how the resin distributes weight internal changes arn't going to be a big factor as long as Evan sanded those edges well

[@DreadKyller]

@@jlammetje For the weight to have a really noticeable effect on the rolls the weight distribution needs to be pretty significant. Even if this is far off you're talking about a bias towards one side of the face less than a percent off. For competitions maybe, but for casual play, it's barely going to have an effect. As FiveSod said, you'd need to put a decent amount of additional weight fairly close to a face to drastically change the outcome. The LEDs and the acrylic cubes are likely quite close to the same weight as the resin, and are still fairly centered, so it's unlike it'll make much of a practical difference, especially for throwing from a low height where there's less time in the air.

[@sadicalradness6927]

I feel like y'all should try the "LED on every face of a mini dice" tec hnique with an oversized d20. They're the most fun to roll anyway

[@EvanAndKatelyn]

That would be fun! Already have a oversized d20 mold Only issue is that we already have too many dice ideas and too little time. Even though we're tempted to become a resin dice channel though, we also have so many non dice ideas we're super excited about. Ahh wish we just didn't have to sleep

[@EvileDik]

@@EvanAndKatelyn I did this as a Christmas present last year, I also wanted lights on every axis, but instead of using 6 transceiver sets, I added extra smd LEDs directly to one inductor, which takes up way less space. but obviously you need to be handy with a soldering iron, magnifying glass, and really thin enamelled wire.

[@georgeh5075]

​@@EvileDikenameled wire flashbacks... *Shivers*

[@Svenz0r]

Having all but one of the LEDs pointing inwards and aiming the outwards facing one to the highest value of each dice would be neat.

[@pixstatic200]

this would be neat, though hard to pull off

[@studiozealot]

Oh my gosh Katelyn I FEEL you with the word "opacity"!! I've said it wrong my whole life (since I saw it first in Photoshop at a young age and never heard it aloud), and it's perfectly reasonable to want to say it the with a long "a" sound, but recently I learned the actual linguistic reason it's said the way it is. The principle is called "Tri-Syllabic Laxing," where a word's pronunciation differs from its root when there are three or more syllables (that's an oversimplification, but my knowledge is pretty superficial). The easiest way to understand it is with extant words that use tri-syllabic laxing: "Wild" and "Wilderness" | "Divine" and "Divinity" | "Opaque" and "Opacity" I hope this gives you the confidence it gave me! I couldn't stand changing my pronunciation without knowing the reason why, and I still slip up all the time, but I honestly encourage and admire the effort to correct yourself and get unstuck from old habits. It's a quality life skill. That being said: English is jank, linguistics is fluid, and it's good to be kind to yourself and others about how we navigate language

[@EvanAndKatelyn]

Honestly this makes me feel better and I learned something today, thank you!

[@randomguyontheinternet5030]

I love all the times evan says an idea, Katlyn says a different idea and even goes "aaand that's a much better idea. we're going with that". these two are so wholesome it's awesome. Even when Katlyn didnt think the embedded LEDs would work, she still let him try.

[@redramage]

an idea for having the LEDs facing outwards: 3d print the "tiny dice" core with the recessions modeled into it

[@Sky-dy4vn]

Big dice are a thing too

[@Xavadings]

These are so cool! I love the color combination. And I'm sure they add a whole level of mystery and magic to the DnD adventure! But mid-video I was thinking how dices would looked if you let the numbers clear and coat the rest of the surface black. The wouldn't look as cool and magical as E&K's do, but still interesting. So it anyone is a maker and likes this idea, tag me in your photos! ;)

[@erlandjohansen7195]

I've seen some people use shell molds, with clear center and black shell you'd get a result like that and I think it would look awesome!

[@wirelesmike73]

THIS!!! I'd like to E&K do this next. Hope they see this comment.

[@theresadobbins1815]

I LOVED the pink and blue... But I also really love the black tester! the black looked so much like a space themed die when lit up.

[@add_xtine775]

lol, that raycon bit was the best lol. i cant tell you how many times ive been yanked back from getting hooked on a doorknob or something. i love the walnut base, really professional and specialized to yalls family

[@JuriAmari]

I could totally imagine this with a lava and basalt or mountain ice dice set. The glow of the magma & ice would look so cool. If you wanted to be extra, you could add some glow pigment to it so it would be lit whether on or off the platform. Also I think I remember why UV was not used… (cue flashback to keycap video)

[@indyat.8450]

This would be so cooll

[@cream476]

These look so cool! Turning the lights inward was a really good choice. If you guys ever feel like going through all the hassle with these things again I think they'd make an awesome chess set too!

[@MissRadi0active]

I would love to see them make a chess set. I think they would make each piece unique and make Jubie the queen. 😂

[@kieransween1678]

I want to see them make a resin chess set now!

[@karlohorcicka7388]

Upgrade idea: put UV leds and UV color as numbers so it lights up the numbers. Or IR leds but that'd be harder to film since camera sees IR wavelenght

[@DominusFeles]

+1

[@noneyabidness9644]

This is the best project I've ever seen on any channel.

[@ye11oman]

I just wanted to share my appreciation of the fact that even as experienced makers, y'all aren't afraid of sharing, but there are still things that you find intimidating about projects and that is awesome ! Also even better than that you share your methods of overcoming which is always very important

[@xxkoumori]

Came for the craft, stayed for the wholesome vibes. You guys have such a cute dynamic.

[@chaoticcordi9891]

31:48 I think Katelyn mouthed “I love you” and that’s the most wholesome thing I’ve seen all day.

[@IdaliaMay]

Should have painted the back of the LEDs similar colors, pink and blue.

[@HAppytobeHer]

I’ve just found your channel and binged almost allllll your projects in a week 😳😁 love your dynamic

[@penny-rose]

Same

[@EvanAndKatelyn]

thank you!

[@iieevaa]

Same 😄

[@thespankmyfrank]

That's what happened to me a few months ago. Now I eagerly await every new episode. Watching them has genuinely given me so much light in my life haha, makes me believe there are so many good people like them out there.

[@its_clean]

Welcome to Kevin Nation :D Just wait until you get to the second channel, the uncuts, and the streams...prepare for wholesome chaos

[@Qvintusmc]

These may as well be semi-randomly weighted dice I'd imagine. Really cool regardless

[@foegettergames252]

@@samarnadra and that is why only posers use crafted resin dice

[@gailgregory2425]

No? They CAN be weighted, but say it's clear resin, no add ins, and you can tell theres no bubbles, why is it a problem? Theres also ways to tell, the salt water test, rolling and finding if theres an average whatever. They're fine for homebrew or less professional games.

[@GardenHoseNapalm]

It would be cool to have a set that randomly changes color, so when you role you could also have random affects thatd be unbiased

[@RangoDangoInc]

i cant get over the fact Evan looks like the fantastic mix of Sam Riegel and Travis Willingham, AND I LOVE IT!

[@CyCyDark]

The final set ended up looking so cool! Just circling back to your original insert attempt; when making dice with Mylar/cellophane, we typically recommend dipping the Mylar in the resin first before putting it into the mould. Putting it in as-is tends to introduce and trap a bunch more air bubbles than you would if the Mylar were already wet.

[@johannamckibben8575]

Yes! I agree. Most dice-makers I've seen have learned from trial and error to always coat whatever inserts they're using in resin before inserting them into the molds. It's messy but ensures that everything is evenly coated and reduces the bubbles SO much!

[@saschaschwarz92]

I love that you don't show just the "right" way on how to do it, but the whole learning process And the Dice look absolutly amazing

[@Sasbatabata]

I came back to this video because I totally called it. I was watching the new baking soda and super glue video, and I was again struck by how much the dice molds looked like Werpy Dice. The dice mold link isn't in the other video's description, but I came back to this one just to check. I'm so proud of myself for something so small.

[@smylyface]

Am I the only one who looks forward to all of their sponsor spots? I swear, they are the only KZbinrs who I never FF over their sponsorships because they make them part of the fun. I have even made purchases using their codes. E & K, you guys are awesome!

[@ricothewarlord3753]

I found you guys during the pandemic shortly after Animal Crossing was released and I have enjoyed every second of each of your videos. I found great joy from your first attempt at dice as it was just a few months after I started making dice myself. You're both awesome and please keep up the amazing work.

[@EvanAndKatelyn]

Thank you so much!

[@--asher--]

I don't know if you've seen this but they've done animal crossing to! It's in the gaming channel

[@enveleptionstudios8711]

I've been playing DnD with some really close friends for quite a while now.. And a very old friend if mine who is also part of the group just cant find his perfect dice. We've literally looked everywhere. He describes them as wooden dice but with metallic edges. I'm aware that this is just a single comment in a big pool of ideas but I'd love to see his dream come true Also: Thank you for your awesome Videos troughout the years. It's been a pleasure to which your creative journey. May it never end

[@junerose7868]

Maybe get wooden dice and add metallic edges? i dont know how to do that though

[@noesunyoutuber7680]

​@@junerose7868 The two options I can think of would be metallic paint/ink (probably silver) on the edges of a wooden die, which is easy mode, or building a thin metal frame and carving the edges out of a wooden die (creating an L-shaped notch where each edge was) and attaching it, which is very much hard mode.

[@Atherax]

Metal inlays in wooden dice, I've made a pair that where like that, tiny metal numbers and all, i mostly buggered it up, it turned out okay but not amazing, but it proved that with more skill it is possible and really cool in theory

[@swimseven77]

That's a very interesting concept. I wonder if solder would be a good choice for the metal edges, or if it would be too soft and deform

[@enveleptionstudios8711]

@@swimseven77 It could actually work though I'd fear the dice then not being weighted properly anymore due to the lack of control you have in terms of quantity of the soldering lead..

[@edgarsketches]

Your sponsors are so lucky. They are one of the rare ads I _watch through_

[@redknights2007]

I saw these led's a few years ago on the Strange Parts youtube channel. He saw that model and Gundam makers were using them to take the figures to the next level. It's cool that your finally using them. 😎

[@00dmb5]

🤣😂 I'm dying, "I kissed your moustache right off", you two are adorable, thank you for making my week

[@SuperVoodude]

Nice! I imagine this could also work in a dice tower. The back of the tower could house the coils and a clearish case would show glowing dice as they tumble down.

[@nerdyluma]

I really appreciate the journey you take us on with your workshoping and testing of different ideas that viewers might think of. The what ifs are shown and help inform us why they didn’t work providing a satisfying resolution

[@caramelbloom8341]

I just wanted to let you guys know, this video encouraged months of work and my passion for electrical enginerring. I truly appreciate how much you do just by showing people the stuff you make, ans hope you keep doing so for a long time. Thank you again.

[@jenniferbowles6080]

You guys are awesome and inspirational. I’m a disabled veteran who lives in SA. I’m also an artist and a crafter and it would be awesome to meet you sometime at one of the craft fairs or cons that happen in the area. But lately I’ve been going through a lot of medical difficulties and watching your videos has really helped to keep my spirits up. Thank you!

[@lemonscented1416]

Thank you for your service ☺️

[@danielmena6271]

They look sooo good, ever since I saw those LED online I was waiting for someone to put them inside dice! So glad you guys had the idea

[@galghoul3042]

I would buy a set of these in less than a heartbeat. Absolutely gorgeous, absolutely magical, absolutely a must-have! Well done, Evan and Katelyn!

[@chocolatecake722]

I used to use of them decompression tanks at work 30 years ago. I worked in a concrete lab, we used it to remove the air before we added a chemical that put air back in. Great video! Thankyou.

[@sofiatgarcia3970]

I'm pleased to see you guys use the proper safety equipment. We love you and want you safe while you (we) have fun.

[@Strav24]

The gliwing center plus the dark spots from the coils really make it looks like cloudy galaxies

[@zuzularoj6866]

honestly, E&K videos are the only places I watch ads without skipping them

[@Tletna]

I'm not a huge fan of earbuds (I prefer over ear head phones) or of wireless headphones, but I got to say that was *by far* *the best* *and most persuasive* Raycon ad I've seen ever.

[@SeriousBeard]

Katelyn yelling opakity with the on screen edit hit me just right man and had me dying. I love the project, the edit, and both of you guys. Thanks for another banger!

[@braynechoblue]

This makes me want to put an Arduino controlling the power source in the box to make the dice flash. It would be cool to have it light up differently when a 20 is rolled. Perhaps machine vision to detect the face that is up but maybe there are other ways of sensing the orientation of the dice. The box makes a nice platform for exploring other functionality.

[@MobTheGlitch]

I had a similar idea for my arduino class I had last year.

[@nenagravil]

I genuinely and honestly hope with all my heart that the two of you are as happy together in regular life as you appear in your videos. You are such a joy to watch and I want the adorableness to be real!!!

[@shuhao2817]

i really want a relationship like Evan and Katlyn. got broken up with 7 days ago suddenly. it came out of nowhere and for that reason i was in so much pain and heartache but this gives me hope. i know i wouldn't have been able to be like this with him and universe have something better in store for me. you guys really are so perfect together. your creative , fun and innovative videos always make my day. thankyou for bringing joy in my life.

[@stephdagie7086]

Love the montage of the tray being assembled 😻😻😻 Also love the side panel design. Sooo cute

[@alliescott7233]

I love the details you guys put into your videos! Like the “Kaitlyn will remember that”

[@FUBARguy107]

I made my own leather dice tray... adding a copper coil along the bottom and covering it with another layer to hide it wouldn't be too bad at all! You guys are adorable! You can paint the numbers with fingernail polish and wait about 5 seconds and wipe it and the numbers remain filled. (oh wait you did it lol) Last edit to my comment; I have Raycon Work Earbuds. I love them so much. The right ear bud controls normal, noise cancel or awareness mode and the left changes the tuning like classic or rock. A double tap on either pauses the sound/video and three taps changes the song ahead or back depending on left or right. The case recharges them between uses and the case recharges on the same cable as my phone. I highly recommend the brand.

[@CalliopeKitten]

I LOVE D&D! Nobody I know plays but some close friends from Ampguard and my family. I found my people! (I need dice like this for my campaign)

[@nsullivan9096]

I reccomend finding bigger dice molds, or 3d printing your own Oversized Dice to give you more space when you want to add electronics to dice! it is a bit easier to work with and you quite literally will have more wiggle room.

[@SilverMoonling]

The entire time watching this I was thinking of the book series The Stormlight Archives where their form of currency are tiny glowing gemstones incased in glass marbles. If there was a way to make them glow for a time you could make a bunch of prop spheres! d= This was fun to watch! The dice turned out really cool.

[@seeing8spots]

Such a cool idea!

[@shoofy1181]

I'm working on making some now, so far they are really cool! Dream come true, I finally have some spheres!

[@tiago9977]

2:32 Ngl, it's kinda satisfying to see their hoarding come in handy tho lol

[@jellynutperson6162]

We so need a D&D series from Evan and katlin maby even par up with other crafting/D&D chanels

[@williamblankenship8209]

I am probably going to now make my own dice! My girlfriend has started watching y’all because of me and she loves it. I love your content for the building and the personality you both have and is so wholesome and fun. She loves you guys now so I’m slowing getting her into building stuff with me because I have always loved to build. Hopefully we are gonna become the college age E&K at home. A DIY version of E&K if you will. A DIY version of the king and queen of DIYers. 😂

[@EvanAndKatelyn]

Thank you! Hope y'all have fun making things together!

[@williamblankenship8209]

@@EvanAndKatelyn I’m completely fan boying right now. THANK YOU SO MUCH!!!! We will 😊

[@LemonPlatypus377]

As a TTRPG player and a longtime viewer, the dice videos are some of my favorites. I LOVE this set and can’t wait to see you experiment with velvet dice! (We all know it’s coming, how could you not? Lol.)

[@JuelzLoren]

Ive been watching you guys for years now and i adore how loving and accepting and complimentary you tow are to one another’s ideas, ambitions, and goals. It gives me a feeling unlike anything else seeing you work together to achieve a common goal. Trial & Error, Glitz & Glam, and Glow & Resin! 💖

[@commanderguy-rw7tj]

definitely the best raycon ad I've seen so far

[@jay_lastnamehere1074]

Oh my god I CANNOT WAIT for y'all to play D&D someday I can't miss that. Love the project and how the dice turned out, and the tray was super cute!

[@DreadPirateElla]

As a D&D lover this makes me so happy, i want these dice so bad bro 😭 Do y'all play D&D?? If so, would y'all ever do like a D&D stream, maybe a one shot or something? I'd love to see y'all play!! Seems like it'd be a blast

[@neinew7735]

Their sponsor was so dramatic and I love it❤

[@GlamGoreChaosQueen]

This is literally the single most coolest thing I've ever seen in my life.

[@davidrichardson4445]

You know it’s going to be a good video when you’re not even 4mins in and we’ve already done a Science Adjacent and a Resin Time!!

[@jamescarter9911]

I absolutely love how u guys make something so simple like a dice into an entire documentary with testing, emotions and success I love it😄💙 your shots were amazing, especially at the end with the mist or smoke and u guys nailed this vid❤️

[@4tm504]

Best ad yet, I'm living for the drama! also love the glowing dice!

[@shirsp4536]

I'm so glad to have found someone who is as bad with speaking as I am sometimes. Thank you Evan for making me feel less alone : ))

[@allietaylor4991]

That was by FAR and away my favorite ad spot to ever exist. Raycon, I'm coming for you! Also, just amazing video, I just LOVE how you guys work through your creations and show us the underbelly of projects. It's the best part! you guys are killin' it!

[@kdjslvgds]

also the production on this video is just excellent. i always love katelyn's editing but this one is a step above. a+ 10/10!

[@wingedambition]

this is my favorite ad yet

[@saxmanseldon]

I NEED to make a set of these for my collection!! These are so amazing! Also, I love the playful banter between you two. Thanks for sharing!

[@kdjslvgds]

honestly, i really love all the testing stages we went through! its always super neat to follow through with you as you try and fail and try again. (not that they were necessarily fails)

[@PhoenixRevival00]

I'm curious how the finished ones actually fair in a float test. I have a feeling these are all rather loaded.

[@Bedlamite23]

OMG! your sponsor insets are THE GREATEST! no one does these better...

[@charleneeaster6886]

Loved the project. You two are so extra in the way you test everything, then more ideas come and inevitably more testing. Also can I just say the ad for Raycon was epic.

[@bow-tiedengineer4453]

I want to do this! I'd probably make a few dozen dice, spin test them for fairness, and then keep the best ones with the rest as just decoration.

[@musicthroughthenight]

Oh my god those dice look amAZING!!!! I now desperately need a set… they’re SO magical!!!

[@ironclad10727]

These are the type of ad sponsored content that makes me willing to buy a product because the production value is amazing.

[@luis241661]

pro tip on applying adhesive materials with peel-away backings. it’s easier to peel and adhere a small corner first and line up the material second. once ur lined up begin to peel and press. this also helps with keeping air bubbles out of ur work.

[@thiadesg]

Best integration of sponsor ever! Thank you for making me laugh every time!

[@martinplaysbg7289]

Taking glow in the dark dice to the next level!

[@KevinBein]

These are so incredibly cool! I am not even really into tabletop gaming that much an I can't get over how perfect these are. My brother is big into D&D and this would probably blow his mind.

[@PetersTreasury]

I LOVE this project so much! The dice tray is gorgeous!

[@Hamiltons_in_the_Heights]

The “cook it on the barbie” comment come,out of no where. Me, an Aussie, was not prepared 😂

[@Floralcrafts]

As someone who has been making dice for over a year, this makes me so happy. Good job y’all!!

[@laurazorri712]

Evan and Katelyns sponsor ads are literally the only sponsor ads I watch on KZbin they are too good to miss 😂