Manual Filament Tuning on Bambu Lab Printers with Orca Slicer! Pt. 2

  Рет қаралды 58,983

Butter Pockets Prints

Butter Pockets Prints

Күн бұрын

Пікірлер: 75
Getting Rid of Z-Seams on Bambu Labs 3D Printers?
13:53
Getting Rid of Z-Seams on Bambu Labs 3D Printers?
3D Print Stuff
Рет қаралды 165 М.
Rat Rig V-Core 4 - X-Gantry Motion (part 2)
4:23
Rat Rig V-Core 4 - X-Gantry Motion (part 2)
Xulkal
Рет қаралды 163
My scorpion was taken away from me 😢
00:55
My scorpion was taken away from me 😢
TyphoonFast 5
Рет қаралды 2,7 МЛН
VIP ACCESS
00:47
VIP ACCESS
Natan por Aí
Рет қаралды 30 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Quando A Diferença De Altura É Muito Grande 😲😂
Mari Maria
Рет қаралды 45 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
Two More French
Рет қаралды 42 МЛН
Manual Filament Tuning on Bambu Lab Printers with Orca Slicer!
8:58
Manual Filament Tuning on Bambu Lab Printers with Orca Slicer!
Butter Pockets Prints
Рет қаралды 84 М.
3D печать с высокой точностью: калибровка с помощью OrcaSlicer
29:06
3D печать с высокой точностью: калибровка с помощью OrcaSlicer
Цифровая фабрика
Рет қаралды 257 М.
Orca Slicer getting started guide: A slicer for all of your 3D printers
17:37
Orca Slicer getting started guide: A slicer for all of your 3D printers
Teaching Tech
Рет қаралды 335 М.
My Secret to Filament Tuning with Bambu Lab Printers
11:30
My Secret to Filament Tuning with Bambu Lab Printers
Butter Pockets Prints
Рет қаралды 146 М.
Tuning Material Flow For Best Quality 3d Prints (OrcaSlicer)
11:51
Tuning Material Flow For Best Quality 3d Prints (OrcaSlicer)
ModBot
Рет қаралды 163 М.
OrcaSlicer Calibration - Getting the most out of EVERY filament!
12:16
OrcaSlicer Calibration - Getting the most out of EVERY filament!
Covenant Custom
Рет қаралды 24 М.
Eliminate seams in your 3D prints with scarf joint seams - An exciting development!
11:49
Eliminate seams in your 3D prints with scarf joint seams - An exciting development!
Teaching Tech
Рет қаралды 675 М.
Improve Your Print Quality With These Tools! (OrcaSlicer)
8:56
Improve Your Print Quality With These Tools! (OrcaSlicer)
ModBot
Рет қаралды 21 М.
Bambu Studio and X1C Updates...is Orca Slicer Dead?
16:56
Bambu Studio and X1C Updates...is Orca Slicer Dead?
Butter Pockets Prints
Рет қаралды 39 М.
Tuning Pressure Advance Has Never Been Easier (OrcaSlicer Calibration)
7:21
Tuning Pressure Advance Has Never Been Easier (OrcaSlicer Calibration)
ModBot
Рет қаралды 101 М.
My scorpion was taken away from me 😢
00:55
My scorpion was taken away from me 😢
TyphoonFast 5
Рет қаралды 2,7 МЛН