MARINO CABALA: Brakes Handlebar Grips and Pedals

In this episode we put the Sram DB8 4 Piston brakes a handlebar some grips and pedals on the Marino Cabala aka Project Dan Marino
0:00 Opener/Failed Home Ec
0:38 Intro
0:53 On This Episode
3:26 Work Begins
3:46 Wolfman Wants A Dropper Podcast
7:55 Welcome To Wolftick Videos
8:43 Wolfman Saves The Day(again)
9:37 ???
10:20 The Tick Trips Out
12:18 Bleeding Begins
15:08 We Don't 🐂💩 Y'all
17:34 Pedals & Grips
18:08 A Look At The Marino
Would you like to help us continue making content?
www.buymeacoffee.com/wolftick...
or paypal.me/WOLFTICK
Become a Patron(Warning Explicit Language):
www.patreon.com/wolftickvideo...
Wolftick Merch:
wolftick-videos.creator-sprin...
Some links below are affiliate links and we receive a small percentage if you use them at no extra cost to you.
Db8 Front:
amzn.to/4alY0dz
Db8 Rear:
amzn.to/3VIVhX7
Mineral Oil:
amzn.to/3J8lF59
Tektro 180mm Rotors:
amzn.to/4cMbcd9
Purple 720mm Bar:
amzn.to/43RCOth
Similar Pedal:
amzn.to/3VNVtEr
Similar Purple Grips:
amzn.to/3TLvGKo
TOOLS WE USED
Brake Cut/Insert Tool:
amzn.to/49ny67L
Pro Bike Tool Torque Wrench:
amzn.to/3xA8abG
Park Tools Bike Stand:
amzn.to/3xmrOb7
Bleed Kit:
amzn.to/3PVmiCP
Park Tools Bike Stand:
amzn.to/3xjL7SF
Pro Bike Torque Wrench:
amzn.to/4cRzSBh
#wolfticknation #db8 #marinobike
4-6-24

[@willardbuchanan9122]

Good day to the wolf tick and the Wolfman❤ preheating a microwave that's I never thought about that not a bad idea

[@ferguson8143]

That's because it shortens the life of your microwave

[@user-rl4ji5ne4o]

Last time I bled my brakes I forgot to put the bleed block on the rear caliper. I was pushing on the syringe and the caliper started leaking oil on the floor. I leant in closer to have a look, thinking the syringe was winding it's way out of the caliper and one of the pistons flew out at speed and there was a small explosion of red brake oil everywhere. Not sure how it missed my eyes 😂 Hilarious stuff.

[@That_Stealth_Guy]

The more and more I see this bike come together, the more and more I am wanting to buy and build me own Marino frame. Before the recent major upset in the bike industry I was considering a Nuke Proof Scout frame for my hardtail build, but since that isn't an option any longer. I think it will be a Marino, the pricing is almost identical and the offer it in a hammered silver finish that I think will look killer on steel frame! I know it goes against Tick's way of doing things.. but SRAM has an AMAZING easy to follow step by step videos on how to cut and bleed the SRAM DB8 brakes on their KZbin channel. As well as a how to video on how to correctly install the barb and olive. The TLDR is that the barb is threaded into the hose first(not pressed in) using the T8 torx key provided and then the olive is threaded onto the barb . SRAM even got smart and made the fittings between the DOT fluid and mineral oil brakes different to help prevent users from cross contaminating them. Trust me its BAD when you do it.😉😉 You way works but you are more likely to get leaks around the barb if you don't get it firmly seated into the hose.

[@mikeburgh3956]

Sorry you couldn't get a ☢️ I was lucky to get a Scout 275 right before the u.s site shut down. Awesome HT!!

[@danboyes7477]

Great job on the bleed, however you've got the levers the wrong way round 😂😂😂😂😂 Love the purple bits on the bike, looking sooo good 😎🍻👍

[@poelawless13666]

Another fantastic episode. It's me the original OG ..lol I've been on the bean bag watching every episode I've just been racing my BMX bike and haven't commented much.. just wanted to let you guys know I'm still around 😊

[@ManicTrailBanter]

I think I already commented on the Review of the DB8 brakes, but I have had two sets so far. I put them on my Trek FS build and they came stock on my YT Capra Core 1, I like the brakes they work well, the biggest problem with them in my eyes is the lever blades. I had 3 wrecks with these brakes that cause issues, 2 bent levers and one destroyed plunger, and as far as I have seen SRAM does not offer replacement lever blades, so essentially you have to buy either the replacement lever assembly or for the same price a whole new brake assembly. I am probably going to upgrade to Shimano SLX or TRP Slate EVO eventually. Cheers y’all! 🤘

[@matttiggerward6147]

This is looking very cool… your aesthetics are definitely improving… nothing clashes and it all looks bling! I think you’ll enjoy the steel frame.

[@impaledface7694]

Last time I bled a brake was.... 2016 or so. Watching this reminded me of what to do on an older sram brake I got in recently. Build is looking great. Look like at least a 66 degree head angle. Slacked out for sure. I think my dh hardtail is.... 36 lbs or so. With 26in tires..

[@WOLFTICKVIDEOS]

Dude thank you, I'm thinking she's gonna be around 36lb as well. All o know is she's gonna shred!!!!

[@_mgiles]

I was on the fence about if I should buy a fox 38 and put it on my hard tail ( couldn't find a 36 anywhere) kept seeing " over forked " all over the internet. This is the video I needs. This Bike looks to cool. And after putting the 38 on my bike I'll never go back.

[@xtrainerchronicles2085]

The barb is threaded as well. All you need is the torx bit to thread the barb in🤫

[@NonLegitNation2]

i know the dropper sent by big sister brandy was for wolfman but i think it would be perfect for this marino build with all of it's more expensive components

[@davegravitt210]

Clarks Blood Clots! 😅 You almost killed yourself with those brakes!

[@ThunderStruckMTB]

I'm sure it's been mentioned in the comments already but you need to remove the rear caliper and flip it around the seatstay so the hose goes inside of the seatstay and not on the outside.... just like you would do on a fork.

[@tracytangen9062]

Make sure to run the rear brake line on the inside of the frame. If you crash the line will be safe from damage...:)

[@cunvericht]

Dang! Dan is looking good!

[@gregnowak2492]

Weekend Edition! Woohoo! Good job on the bleed. Definitely one of my LEAST favorite tasks. RTR next! Do it!

[@slothsquatch5023]

Preheating the microwave?? That's on Wolfman for not teaching you how to nuke hot pockets. But in Wolfmans defense the Tick did destroy Wolfman's prized egg pan. Bleeding brakes is fun mmmmkay. In the Magura dropper post episode Wolfman said he was the one who cleaned up the messes...😂 Kidding. Can't wait to catch up to your videos.

[@JDfromNV]

Bike came together great! Good job guys I can’t wait to see it in action.

[@mikebain2790]

That bike looks sick!!

[@armandocardenas6094]

Brother, you need to install that purple bottle cage in there.

[@NorCalRide]

The Sram barb screws in.

[@Halogran77]

Cheers wolfman 😜

[@andrewsiasparks]

That's a sexy rig. I love steel hardtail bikes

[@mtbboy1993]

15:48 Interesting the hose is on the outside, maybe cus it's too tight to put it on the behind the seat stay. 16:59 Looks like you got the hoses perfectly cut to length.

[@derekneumann]

Looks Sick!

[@mtbboy1993]

14:25 looks like this bleed kit does not have the thing to squeeze the syringe hose. The Formula bleed kit does, so I close it off, and lift it, so fluid is all the way to the top, it spills over once bleed screw is put in. But assures there is max possible fluid. But the drop method you used is cleaner.

[@BerserkerNick]

Downhill bike? Nope. Hard-core hardtail? Yes. Enduro hardtail? Absolutely I'm running the DB8's and they feel really good. Clean the brake pads with light sandpaper before you go for your first ride, they take forever to bed in otherwise.

[@mtbboy1993]

19:53 Definitely slack, my bike has 62.5 deg. it looks very similar. Definitely a hardcore hardtail. Slacker bikes exist, but only few of those, Alutech Cycles the german brand has the Armageddon, it's made in Asia, But forgot where, which was inspired by the Pinkbike Grim Donut I think it got 57°. Seen a steel frame builder build a frame with 58 deg. But I forgot the brand. I'm satisfied with 62.5 deg. Many enduro bikes don't go past 64deg.

[@willardbuchanan9122]

I thought the purple bar was for Wolfman

[@northwestmountainbikeaddic6874]

The domain can fit a 200 mm rotor without an adapter

[@mtbboy1993]

9:33 Stick does not have self censorship.

[@superado2k]

#bassackwards 🤣🤣🤣

[@JustinSH0RTS]

Can uou test the zoom dual crown forks pleaseee 😊😊

[@wiliam-bd]

you should try magura brakes !

[@mikeburgh3956]

Or Shigura

[@armandocardenas6094]

Lol .... the mushy grips.

[@willardbuchanan9122]

How much does the bike weigh now❤ without the dropper post

[@keosoutdooradventures]

I get that a lot of people only hear what they want to hear and take a lot of stuff out of proportion

[@jasonwilliams8526]

Made for going down? Shoulda called it Cabala Harris.

[@northwestmountainbikeaddic6874]

What rear hub is that?

[@davegravitt210]

Srit! 😂 🤮. I have TRP calipers coming for New GT Bike Day. Anyways Howdy 🤠! AMERICA!!!!

[@mtbboy1993]

Good it was not Sram brakes with DOT fluid. Got to love Mineral Oil, DOT is toxic and bad for skin and paint. mineral oil won't eat the paint and blind you. But still don't get it in the eyes, as it can irritate. A nice thing with Sram is they offer spare parts, but I've not looked into if they do for this brake. I looked it up and could not find any yet. No spare lever blade, pistons, internals yet. But on DOT brakes they offer all parts as spares. Maybe some day.

[@keosoutdooradventures]

First!

[@willardbuchanan9122]

I think the bike will weigh 36.5

[@bassw1758]

Should just get a set Paul Klamper brakes, hydraulics have never been worth the aggravation, and are not reliable, Imagine you had to pump your car brakes so you wouldn't crash and burn every time you got into it.

[@mikeburgh3956]

If have to pump? Then their is a leak, or not bleeding correctly.....

[@northwestmountainbikeaddic6874]

Tektro rotors are trash

[@andrewsiasparks]

The new 2.3 mm ones aren't as bad as the old ones but they're nothing like galfer or Hayes quality and bite wise

[@faithwalk5926]

Give the Man break he said backaccwards correctly 🤣🤣😂😂