MUST SEE Review On the Hyped-Up Sizzix Switch Machine! Please Watch BEFORE You Spend Your Money!

[@laurabuehler]

Oh, BIG INFO HERE: for anyone who gets one, be sure to REGISTER your machine. By registering the machine your 1 year warranty gets extended to 3 years. Considering it's an electric machine, a 3year warranty might come in handy.

[@marypolancodesigns]

OOOOH NICE! I'm pinning this comment. THank you so so much!

[@rcarr48]

Glad you said that I didn’t do mine. Wonder where the paperwork is!!

[@judipalumbo]

How do you register the machine? I have nothing that tells you to do that in the box and I sent an email to sizzix twice, but they never answer.

[@bronwen.creates7931]

@@judipalumbo Instructions on how to register it and a website link are included in the instruction booklet that comes in the box with your machine. Make sure to write down the serial number of your machine (it's on a label on the bottom/underside of the machine) and you will also need the date you purchased it.

[@ker5776]

Until you have to ship it back to sizzix for repair for $50

[@dianaperry583]

I’m in the U.K. and played with my new machine today, I have 2 large 6 inch square dies that I have had for 5 year’s, and I got the first successful cut from one , I left the other til tomorrow , I have used 6 different cutters but non cut near the centre but I cannot fault what I did today,

[@veramats]

Two years later and I still love my Switch! I also have the Vagabond 2 and it also works well after many years. I use the Switch at home and the Vagabond on retreats. I’ve just always used Sizzix machines and I’ve never felt the need to try anything else. Thanks for sharing your reviews!

[@marypolancodesigns]

Thank you so much for Sharing this testimony. I get asked this question a lot And I still really like my machine too

[@abigailfowler4728]

Thank you so much for making this! I'm having to make a decision for my small stationery business. I truly appreciate it!

[@marypolancodesigns]

Thank you so much for letting me know it was helpful! YAY!

[@HPNana-]

Greetings to you all. I started making cards at the end of May 2023 and this hobby is expensive. I have been researching, comparing prices, reading reviews, etc. I decided to go with the hand crank Sizzex Big Shot and I ❤ it. We have frequent power outages down here and when it happens, I pull out my camping light and keep rocking and rolling. Maybe later, when I hit the mid 70's, I'll go for an electric one. 😂😂

[@marypolancodesigns]

Brilliant reason! Nothing stops us!

[@carolbatchelor5855]

I never really considered buying this machine, but after seeing your video, I'm wondering if maybe I might need (yeah right) to get it. You've such an enabler, girl! Thanks so much for sharing this!

[@marypolancodesigns]

Hehehe...SO sorry! But I couldn't contain my excitement after waiting for so long!

[@jeanmm2996]

Looks like the price has jumped in 2023. I guess that's what happens. Thanks, Mary! That's a great machine! Excellent review.

[@marypolancodesigns]

Yeah that happens, and it does a lot with cardstock too. boo lol

[@joannsanders242]

It’s May 2024, and I just paid $300 with tax. Ugh! I was shocked at the prices on here! 😢

[@judipalumbo]

I stated that I just got mine from Hobby Lobby as when I ordered it, Scrapbook was out of stock. It is a pretty coral color not pink and not orange. It is called Sherbet and it is very pretty. It came in 2 days free shipping. I have only cut one die with it but loving it already.... Something I wasn't really prepared to spend money on right now but reading Mary's review after reading a bunch else where, I had to get it.... I will cry when my credit card bill comes.... That is ok, I can blame it on Mary! No, j/k! Thanks Mary and I hope others that are on the fence about it, when they can.... get it. Great machine and really pretty quiet, alot quieter that I expected. Thanks again Mary! (and for convincing me to spend more money..lol) 💖

[@marypolancodesigns]

The one you got sounds so pretty! I'm so glad you got a good deal! YES

[@j.whiteoak6408]

I love my manual Big Shot Plus!! I usually only use it with very large dies, but no machine is perfect - and neither are the dies. I grabbed my manual the moment that the electronic Switch version came out, and I'm glad that I did as the manual ones are now hard to buy. Our large local craft outlet doesn't even stock them anymore, and I can't imagine how the Switch will hold up in the long term .. nothing with an electric motor ever does!

[@marypolancodesigns]

I wonder if Sizzix is phasing out manuals because you're right I don't see the Big Shot that many places. I know Spellbinders manual (the one I have) is amazing though so that's a good alternative.

[@CardsbyMaaike]

Thank you for the review. I am looking for an electric one as my arthritis and rheuma won't let me do it by hand for much longer I fear, but I have so many other things to get/buy first haha I want the black one. I love the concentration on your face at the partial cutting. that was my worry (that I couldn't do that anymore) so thank you

[@marypolancodesigns]

OMGoodness I was dying looking at my facial expressions through mirror reflection. hahaha I was so concentrated! lol I'm glad I kept that part in.

[@LynnMLeBel]

Lynn Le Bel Thank you Mary! I just got an early Christmas gift my husband bought me, a white Big shot Switch!!!! I really appreciated watching this video and getting the tips. It gave me a comfort level to go and try it!!

[@marypolancodesigns]

YAY! What a great gift! It's so fun and I use mine all the time.

[@katewelsh1285]

Thanks soich for sharing. Im currently doing my research on this and your video has beem the most helpful 😊

[@marypolancodesigns]

Oh that is so great to hear! Thanks for sharing.

[@pquack51]

Thank you very much for this video. I think this would be a good choice for me and this video helped with my decision making!!

[@marypolancodesigns]

I'm so glad it helped. I really love it so much!

[@sheilagraber5577]

I was lucky enough to get the pink machine as soon as it was released. Signed up for the notify me when it was on the coming soon area. Such a wonderful machine ❤️❤️❤️

[@marypolancodesigns]

YAY! Love this one so so much. SO happy you got it and love it

[@cindyellis765]

I had already made up my mind to get this machine so this video is a big help. It also gave me ideas for getting a couple of Bigs dies. Thanks a million, Mary!

[@marypolancodesigns]

YAY! You'll love it so much! I absolutely do!

[@yvonneboucher9306]

Thank you for this wonderfully informative video. And, I absolutely love your alphabet/numerical storage, very clever!

[@marypolancodesigns]

Glad it was helpful! Thank you so much for that!

[@lizfeltwakeman8055]

I see the plate says do not use for embossing. Can the machine be used for embossing?

[@marypolancodesigns]

Yes you can emboss on it. The main platform has pictures of your sandwiches that you would use for embossing with folder. Great question!

[@karentalbot4372]

My plates warp REALLY bad. I purchased the large magic mat ($15) and cut it down to fit (so I could still utilize the full size plate) it works great, and I only need the one clear plate with it. I’m able to alternate my clear plates now to reduce the need of full replacement. To cut...I used my red rubber cutting scissors.

[@marypolancodesigns]

Thanks so much Karen. I am methodical about moving my plates each time I use them and putting dies on different spots. I have noticed a slow down in the warping.

[@simonejosephson6462]

Hi. I have been disappointed a few times by how these kinds of machines work over time. For example the Gemini junior has not hung in there for me. Can you do another look at this machine in a few months thanks!!

[@marypolancodesigns]

Absolutely thank you for that suggestion!

[@juliebeard6424]

Wow! Apparently its here in Australia! Oh my. But I have seen one cut fabric yet. I would get one. I have a old sizzix a crank handle one that I have never used!!! I also have a number of blades too and never used those too! Please make a fabric cutting video????

[@marypolancodesigns]

Hi Julie! I don't usually cut fabric but will add it to my list; in the meantime, see if someone has done that on YT for you already. It's such a great idea.

[@suklinkner8684]

I was wondering why the title of this video makes one think you didn't like the machine, that's why you were warning us to watch it before we bought one ?????? But it sounds like you like it I'm glad for that.

[@marypolancodesigns]

Oh haha...thats me...Im the one that's been doing all the hyping! Lol. But I really do want people to see if this machine is for them before buying it

[@MyNana58]

Good. Know you use the that black mat with the Gemini 2. Can you show the sandwich you use please.

[@marypolancodesigns]

For the Gemini Jr, one way to do a sandwhich is: Cutting Plate Magic Mat Paper Die Cutting Plate Hope that helps!

[@nellieambert4102]

Thanks. Will try when I received my mat.

[@reginabasart5080]

I want to hear from your birdie. It was funny when you were unpacking, there were birds singing in the background. I can’t wait to get mine. T4s

[@marypolancodesigns]

SO many birds here in the morning I LOVE IT! lol

[@mpbailey18]

Very interesting video! Would love a Switch, but when I saw a screenshot from 7 months ago, that these machines were only $213 and now over $100 more, it irritates me! Guess I wait for the prices to settle....or at least for a major sale...

[@marypolancodesigns]

Yeah that's no good! A lot of people have shared that if you can get it at Hobby Lobby it's only $200; not sure if that helps.

[@mpbailey18]

@@marypolancodesigns Thanks...I will definitely check out HL!!

[@mpbailey18]

@@marypolancodesigns Checked out HL...doesn't seem they even carry the machine any longer. Looked at Craft Direct..$280, no tax & free shipping. I just don't know this company though...

[@mn36]

I ordered the TH switch through my Local scrapbook store. Love it. Have used the magic mat with it too, no problem and my regular sizebig shot plates too.

[@marypolancodesigns]

YAY love to hear this!

[@JoanOrloffDK]

Congratulations on your new machine YAY 🥰 I love it and if I didn't have the A4 Gemini, I would buy the new Sizzix machine. Great review Mary ❤ thanks for sharing and happy crafting Hugs xx

[@marypolancodesigns]

Thanks so much Joan! YAY

[@barbarahill6365]

Oh, Mary! I have a Empress and a Gemini’ you make me want that too. I have the old steel dies which have been unused because I don’t have other machines! Thanks for a great tutorial

[@marypolancodesigns]

Thank you so much Barbara, I appreciate this so much!

[@MaryMoisan]

Thanks for the review Mary. I also want the TH black machine and liked what I saw when Tim demo it. IT's starting to show up at stores near me, but I'm not ready to buy yet. I really have to think about it. I got the Gemini Jr about three years ago and only used it a few time, before putting it away and going back to my old friend the Big Shot.

[@marypolancodesigns]

I love that you have a favorite! The Big Shot seems to last FOREVER. I'm hope as lucky with my Switch

[@samanthastevens4763]

I would love to hear how this compares to the Gemini

[@marypolancodesigns]

I don't have a 9x12 Gemini but how it compares to the Gemini Jr is it's quieter and my plates aren't warping as fast because of that sturdy base plate I believe. Still manual die cutting and the pressure is great on both.

[@carolstella6776]

Seriously considering getting this. The crank type is just getting harder as I get older. I’ve had good luck with everything Sizzix makes, and my BigShot needs to go into retirement. Wish you would have shown the results of the embossing folders though. Thanks for sharing.

[@marypolancodesigns]

Great point! I need to do that but I will tell you they work amazing. They fit the super thick folders perfectly

[@sherylosullivan9619]

Thanks Mary. My Switch is on the way and I’m so relieved to watch your video to confirm I have made the right decision. I have a Big Shot and find it tedious to use. (I guess I’m just lazy) I’m really hoping that the Switch will manage some of my dies that I really struggle getting a good result with.

[@marypolancodesigns]

I am with you on the Big Shot; we are not lazy, we are efficient. haha

[@sherlockhoka]

Great job. Love this machine. You did not mention the additional cutting pads. The precision plate makes all intricate dies perfectly. It is one of the plates that solves a myriad of problems. Love the switch.

[@marypolancodesigns]

Thanks so much for this additional info!

[@dianelikestosew]

I'm so excited for you. If my body and mind can stay well. I will get one!

[@marypolancodesigns]

YAY! And YES you will stay well, I believe it!

[@Bellbirdblue]

I’d love one but I have a dog who is terrified with certain noises ( like my heat tool). I’d have to be aware where she is every time I used this so sadly, it’s manual winding for me.

[@marypolancodesigns]

On no poor thing! No, good not to get one then.

[@anaramirez9813]

Mary could you make a comparative between this and the gemini? Are they the same???

[@marypolancodesigns]

I can't do an exact video because I got rid of the Gemini. In short, the Switch is quieter and fits all dies. The Gemini is much louder and only cuts thin dies, not the steel cut dies. About the same size for the footprint though.

[@kykategray]

I had no intentions of getting the Switch. I have a Gem Jr, Big Shot, Vagabond 2, Sidekick and (my favorite) Tonic Tangerine. I was not even considering it! Not. At. All!! That is, until I watched your video. Now Mary, I know I should thank you (?!) but I gotta be honest, I’m just not there yet;) When the day comes when I have my shiny new toy (and my bank account is a bit lighter), I will reconsider. Until then, I will obsess over, find ways to justify and daydream about buying The Switch. Still sending hugs from KY.

[@marypolancodesigns]

Hahaha this made me laugh out loud! lol Well you saw how many machines I showed in the video...so you won't be hearing judgement from me. hahah

[@BelindaBecerra]

Thank you for this you tube. Im so glad you got yours. I’m waiting and waiting for my switch. I’ve had the vagabond for awhile but it’s dying. So I need a new electric die card machine. I love that switch is wider. You gave a real good demo.

[@marypolancodesigns]

Oh thank you so much Belinda, I'm so glad it was helpful. I do love mine!

[@BelindaBecerra]

I got it. I like it. But sometimes it makes a real loud cracking sound. I know I know cracking is normal. But it scary

[@kcinca5410]

I love my new Switch machine and was able to get it for a great price the day Tim showed his live on his KZbin channel. I love it and it's performed great EXCEPT Sizzix has not released a crease pad that works with it yet. I was very frustrated trying to run a TH Bigz L 3-D star die through it and it kept cutting the score lines. I tried all my platforms and all my plates. Needless to say I wasn't a happy camper but knew I still have my Big Shot Pro (which doesn't have enough pressure all over for intricate dies) which cuts AND SCORES that die beautifully. Sizzix is coming out with a new crease pad that will fit the Switch but I'm not sure when. Other than the crease pad issue I had nothing but a great experience with this machine. I got a turntable because of where I placed the machine but it really wasn't necessary. It really is a small footprint for such a large platform and I LOVE LOVE that all of my other Sizzix products will work with it. (Sorry, this was so long.) Happy you FINALLY got yours.

[@laurabuehler]

I think the Big Shot Plus crease pad should work...they are the same size. I've been told the cutting pads work in the Switch, so I would think the crease pad would work.

[@kcinca5410]

@@laurabuehler Sizzix's website specifically says they are making a crease pad for the Switch so I'm not inclined to order another which may or may not solve my problem. I have the extended crease pad which works fine in my Big Shot Pro. The Sizzix website says all the crease pads are 1/8" thick. I'm thinking the new crease pad for the Switch needs to be a bit thinner to avoid cutting instead of creasing but thanks for your input. And yes, all my other Sizzix platforms and various plates work fine in the Switch. The crease pad is the only thing I couldn't get to work properly and I tried EVERY combination of platform and plate that I have. 🤷🏻‍♀️

[@marypolancodesigns]

OH this is great information; thank you! I don't know what a crease pad is so I have to look into that. Thank you !

[@kcinca5410]

@@marypolancodesigns it's a soft plastic cutting plate to use with the Bigz dies (instead of one cutting plate) that has crease (fold) blades instead of cutting blades so you easily fold the paper for your 3-D dies. It's supposed to stop the fold blades from cutting the paper and instead only score them but the current crease plate is too thick to do the job properly. Hope this makes sense/helps.

[@cpr_creations]

I wish you compared it to the Gemini’s since you had them

[@marypolancodesigns]

I hope there is another YT video you can find a comparison between them.

[@kathyparrish1442]

At last! Something that works across all sizes. I have Bigz Dies as well and it is nice to see that they can be used in this machine as well as the hand crank versions.

[@marypolancodesigns]

RIIIGHHHHT?? LOL i was just elated!

[@rcarr48]

I got the pink one a couple of months ago. I absolutely love it. One thing you didn’t show is that you can use your regular size Sizzix plates from the big shot. It’ll take any size plates.

[@marypolancodesigns]

Awesome add, thank you so mucH!

[@pathamm5834]

Yeap, I use my smaller plates from my crank big shot for small cuts

[@barbluecht3500]

Hi Robin I am waiting to get the pink one too… where did you get yours

[@scubajenn5]

I watched the TH release of this & then HAD TO HAVE IT!! Of course, it was sold out EVERYWHERE online. So, it was ony wishlist for when it came back in stock. Shopping at Hobby Lobby one day, there it was!! A beautiful peachish color (kind of reminds me of the new Saltwater Taffy color lol) & it was $100 CHEAPER than online!! It now has a home in my craftroom & I ABSOLUTELY LOVE IT!!!! I have the regular Gemini as well & I will keep it but, I do find myself using g the Switch MUCH more often. The Switch IS the perfect machine!! Thx for your insights & tips & tricks!

[@marypolancodesigns]

Ok someone else mentioned the coral color and I had no idea what they were talking about, it sounds glorious! YAY!

[@colleensanderson6154]

Me too! $199 got to carry it right out of Hobby Lobby. I am enjoying it Love using the smaller sandwich from my Big Shot Less time to go through :) And it doesn't drop out on the other side with the smaller either. Going to look into the magic mat. I didn't know they protected. Until I saw this video.

[@pathamm5834]

I have my new machine and I do love it …. I hav torn rotator cuffs in both shoulder and suffered a lot when I would use my crank sizzix machine but now I can craft a lot and still sleep at night without throbbing shoulders ..you did a great review

[@sweettreatsoverload4296]

Unrelated but do some research on the following they have helped me so much. Msm, collagen, vitamin c , bromelain. These items have helped with pain. Please do tour homework. The only one that i had to watch was the msm you have to graduate increase it over time. Start with a very small amount take with vitamin c to stop any itching. It acts as a detox so if you get a headache cut back. If you start itching take more vitamin c to stop itching. It does make your hair grow so if your hairy it will make it worse. Im not hairy so it works great for me. So your research there are so many things to help with pain. I can get out of bed now. Hopefully you can find a routine to help yourself live a better quality life.

[@marypolancodesigns]

Thanks so much! I'm so glad you have a machine you love too! YAY!

[@MareeForman]

Thanks for this Mary. I held off for a long time before buying an electronic machine. I finally bought the white switch and I love it. I love that I can still use by base plate and cutting plates from the big shot as well. Since they are cheaper to replace I will save the big ones for special projects😃

[@marypolancodesigns]

YES! I feel that it's the most all inclusive machine I've had. Love it so much

[@marciataylor4077]

Maree.......my plan, as well for the cutting plates.

[@sylviaesposito4757]

I put wheels on my Cricut and my silhouette. It helps move the machines around. The wheels are from Amazon. They have a sticky pad that holds them on, low profile.

[@marypolancodesigns]

WOW brilliant! Thank you for this tip

[@sylviaesposito4757]

@@marypolancodesigns I will look for the number on Amazon.

[@sylviaesposito4757]

@@marypolancodesigns 20 pack mini self adhesive caster wheels, non swivel casher

[@sylviaesposito4757]

@@marypolancodesigns I put one in the middle and two on each side. Rolls vey easily. Doesn’t effect the stability off the machine.

[@pamkenel7534]

I thought if you use a magic mat with a sizzix switch machine it eliminates the warranty

[@marypolancodesigns]

YIKES you may be right! lol and I'm on video so I'm definitely not gonna get that warranty should I need it. lol Thanks for the PSA.

[@stamperssecret5379]

Nice to see you again. I learned a lot.

[@MovableNu]

Great review! 👍🏾 I need little to enable me when it comes to crafting purchases. But I've been looking at electric die cutting machines that can handle larger than A5 cards. Thank you!

[@marypolancodesigns]

My absolute pleasure! Thanks so much, Lisa!

[@viviancoleman3948]

There was a white one in my local Spotlight so I snapped it up for a birthday present to myself even though it’s very pricey here in New Zealand. No regrets. The plates do warp so I saved up for spares which I had to import from England. And I am still having to experiment with the sandwich for embossing folders. Thanks for the encouragement to try partial die cutting and to use self healing mats. I would love to try a magnetic plate but am reluctant because of the electrical factor. I will try my bigz dies now though. Thank you Sizzix! Ps I did read somewhere to store the plates halfway through the machine to avert warping so I am trying that.

[@marypolancodesigns]

OOOH great tip thank you so so much for that!

[@sylviaesposito4757]

I made a magnetic plate for my Tim Holtz vagabond electric machine. It works great and cuts really nice with it .

[@storyteller3927]

when I stored my plates half way through on my ordinary big shot my plates were eventually damaged so much I couldn't fix them or use them again.

[@bernicegoldman8737]

I love my Switch it has been a game changer for me. I was blessed to get mine for Christmas from my family

[@marypolancodesigns]

AWESOME Gift....hello! love that!

[@RickGrigsby1]

I guess I think most machines work well new, out of the box. What do you think now, a year later? Does it still cut thin metal dies well?

[@marypolancodesigns]

Great question and good point. Yes it still works incredibly well and I am still using the same original plates

[@lisaheld439]

not sure if you will see this as this video is one year old My big shot express electric machine is now not reversing so I'm thinking about getting a new machine. I guess it has been discontinued and replaced by this new one. Question: does the platform and cutting plates from the big shot work with this machine? thanks

[@marypolancodesigns]

I'm so sorry that I can't help with this specific question. I don't have the old plates so I can't test it out. Check more on KZbin you might find something. :)

[@carolynr.4227]

thanks so much for the great demo. I currently have the Vagabond that I have been using for several years. My 2nd one. I will probably put my name on a Back in Stock list.

[@marypolancodesigns]

I'm glad it was helpful; this machine is awesome!

[@katherine9026]

I thought the directions say to place them die blades facing up????

[@marypolancodesigns]

I do both actually but for intricate dies, you want to do as you suggest, die facing up.

[@carolbostick414]

I pre-ordered this machine online from a mom and pop store. It was at an extremely good price. They called to let me know that It wouldn’t be ready until probably mid May, but I could get a black one now. I opted to wait for the white one , she didn’t have the pink one. I can’t wait to get it! Thanks for doing this review!

[@marypolancodesigns]

Oh I love this! How awesome that you are getting one! It's like waiting for my new car we just got; 2 months because I wanted a particular color and model. lol Well worth it!

[@pamelafernandes480]

Sounds like we ordered from the same place. I have been waiting since Feb so I figured another month won't hurt to wait for my white one! So excited to play with it. I do so, so much for cutting. Have fun with yours ☺️

[@pamelafernandes480]

@@marypolancodesigns oh, enjoy your new car!!!

[@BelindaBecerra]

I’m in the same boat. I ordered from SMS. I’m waiting for the white one as well

[@karenjohnson3495]

@@BelindaBecerra You probably have it by now. Stacey ships them out after everyone goes home. A little bit at a time. That is the way she works. I have ordered many things from that store.

[@janepowell4739]

For me it seems every thing I want but please can you tell me if there are no magnets in the machine or plates as I have a pacemaker. Also, any warping of plates ? Xx

[@marypolancodesigns]

I wouldn't feel comfortable answering this question. Please reach out to the company. They would me more liable for giving you exact nomenclature.

[@nancyloomis3046]

Hi Mary…Jan 2023 viewer here….love your reviews! I’m now considering getting the Switch. I knew I would get it at some point, but I’m having more joint issues and the cranking on my Big Shot is beginning to cause some discomfort. Sometime after Sizzix brought the Switch out, they changed it to “Switch Plus.” I vaguely recall Tim Holtz commenting on the name change in one of his fab videos, but can’t remember exactly what the diff was? I think it was a fairly minor change, but do you know? Thanks for this great review!

[@marypolancodesigns]

From what I know, there is only one Switch. The other one might be the old Sizzix large platform electronic die cutting machine but the Switch is a new one. I'm sure they both do the same thing but for the Switch you don't have to hold the button, you put it in and it goes automatically. I don't know if the older one did that.

[@patomahony8244]

Thank you. I have been looking at all the different machine in Australia stores and online and there is not much choice and at the cost was not sure what was the best. After watching your review was bit happier. With the Sizzix taking the thicker dies, it should be alright with the 3D Embossing Folders. Hope it works with all brands of dies. Thanks.😃

[@marypolancodesigns]

I dont' know the exact sandwich for that but I'm sure someone on YT has figured it out for the 3D embossing folders. I really do love this machine!

[@jeanannmoale7295]

Hi Mary, once again a super review. Thx so much for sharing, we can always depend on you! I'm interested in this machine, but I've got the patience to wait a bit for better pricing.

[@marypolancodesigns]

Good call; I hope it comes down a bit too.

[@idzzin4all]

This video is 2 yrs old. Do you still have the Switch and are you still happy with it? I've been reading a lot of negative comments, but I'm ready to make the "switch" (see what I did there 🙂) to an electric machine to cut my dies.

[@marypolancodesigns]

So glad you asked this question. I do still love it but there are also things to consider as to maybe why. I use the large magic mat from Scrapbook com instead of one of the cutting plates because it keeps me from having to buy them more often. They are not cheap (the acrylic cutting plates) so I find by substituting with a magic mat it helps. I occasionally have to use a shim but that is product dependent and not the machine issue. I love how much more quiet it is than the Gemini and that the surface is so large. I wanted to keep my BIGZ dies so this was my choice over the Gemini. People love the Empress but you have to get what works best for your needs. If you want to check out the magic mats and their sizes here you go: shrsl.com/4nr93

[@idzzin4all]

@@marypolancodesigns Thank you. I ask because I'm also looking into the "Couture Creations GoPower & Emboss Machine". It too will allow use of the BIGZ dies. I've seen mixed reviews on the Switch, but I follow you extensively and wanted your opinion after using it.

[@joannsanders242]

I cannot find a way to register my machine. I opened an account at the website it said to, but there’s no place to register. They only have voice mail directing you to their website and they don’t return emails!! Can anyone help???

[@marypolancodesigns]

Oh I hope someone can help here! Good luck

[@christinetemple2239]

Where do you buy the magic mats please

[@marypolancodesigns]

Here you go! shrsl.com/45st1

[@marcydobbs1653]

Glad you shared this now. A friend is looking and I'm helping her. She can get on the" notify me" list if she likes what you've shown. Thanks.

[@marypolancodesigns]

Marcy, let her know it's back in stock. If you want to share my link please feel free! It's an affiliate link so I'll get a small commission from it. :)

[@judipalumbo]

Thanks Mary for doing the review. I REALLY WANT ONE NOW, but with having bought my Big Shot Manual Cutter and the Brother Scan and Cut in the last 3 months, I can not buy a Switch for awhile. 😢Maybe I can sell my Big Shot being I have hardly used it. Oh well, just have to wait and see.

[@marypolancodesigns]

I'm not suggesting this for you, but it's funny you mentioned it because I do have my Big Shot Plus for sale on FB. It would just cost so much to ship.

[@judipalumbo]

@@marypolancodesigns It is something you have to more or less sell locally. I have thought about it. I hate ebay but they seem to get decent money for their used units.

[@cindydecker57]

@@marypolancodesigns ha ha, I have my Big Shot Plus up for sale as well …. I expect there will be more of them for sale as people switch to the Switch 😁

[@bettyhornberger1470]

Due to space issues....I am considering a turntable...has anyone else used one for the Switch?

[@marypolancodesigns]

Ooooh great question.....i'll be looking for this answer.

[@cindydecker57]

Yes, I have my Switch on my Totally Tiffany Clip & Create 9x11 Rotating Design Board (I wasn’t using it much for anything else anyway). I LOVE this solution, which I got from watching Cathy Z as she uses it for her Gemini machine. I leave my Switch/turntable out on a counter all the time, pushed to the back out of the way when not in use, and moved forward and rotated 90 degrees when in use. I am now using my machine much more often since it is always ready to go 😍😍😍

[@bettyhornberger1470]

@@cindydecker57 thanks!!! I'm glad to hear you use a turntable idea too and it works!!

[@created2bless322]

Thank you Mary! The only draw back for me is that it is not made in the USA and that makes me really sad. Your review is great as usual, and I do want an electric machine this one may be it! I have a cricut and a brother scan n cut too but so many dies and the steel ruled ones as well, I have that alpha one, love it!!! Thank you again Mary!

[@marypolancodesigns]

Thanks so much for the encouragement and sweet comment. I do NOT use that alpha die enough and it was because I didn't want to pull out my big shot plus. hahah

[@created2bless322]

@@marypolancodesigns I have to crank style die cutting machines but they hurt my hands so much. I didn't know they would be so hard to use so I use them minimally. I have the fold up style but....NO!

[@jenniferolson1449]

I saw the switch machine reviewed on you tube and really thought I needed it (even though I already have the big shot). I didn't pull the trigger on getting one. After that I was at a crop and someone at the table behind us had one and it was SO loud! It was sort of disruptive to everyone in the area which is making me reconsider. Do you find how loud it is to be a problem? Thanks.

[@marypolancodesigns]

Hi Jennifer, the sound is definitely something to consider if that's not attractive to you. I don't mind it at all and find it a lot quieter than the Gemini.

[@karenjohnson3495]

@@marypolancodesigns I just got a new one a few days ago and I was so glad to have a quiet one. And your are right it is quieter then either one of my Gemini's. I got it off of Ebay!

[@bertas-cards]

@Jennifer Olson If you want a quiet electric cutter. Look into the GoPower by Couture Creations.

[@sarastevens7665]

I found the black one in JoAnn too!

[@marypolancodesigns]

Woooohooooo

[@janicehandke4426]

Does it have a magnetic plate.

[@marypolancodesigns]

It does not come with one no.

[@cindydecker57]

The Switch does not come with a magnetic platform in the box. However, you can reuse your existing one if you already have one - or - you can order a Sizzix Big Shot magnetic platform (either the standard or Plus size) as an add on accessory for your Switch.

[@414cardsandpaperie]

Hi Mary, thank you for the great review. I love the alphabet die you showed could you let me know which die that was, I’d like to see if I could find it. Thanks again 😊

[@marypolancodesigns]

Thanks so much Carolyn, That is from Spellbinders and it's called Type-Oh. :)

[@anthonywarwood6817]

Can you use the smaller platform and plates ?

[@marypolancodesigns]

That's such a great question, I'll have to try it out or you can search YT to see if anyone else tried it.

[@lizzystitch4842]

Question: How well does the Switch work with embossing folders? Does it cause major warping like my Gemini does? My Gemini has ruined every embossing folder I have put through it.

[@marypolancodesigns]

That's something I didn't even think to demo but will do a follow up to this. Thanks!

[@cindydecker57]

I have run several embossing folders through my Switch, both regular ones and 3D ones, without any warping of the folders at all.

[@mandy.austin]

God! Seems like we've been waiting for this ma hine FOR EVER!

[@EricaFieldsfrogs4ever]

Do you have one Mandy? It hasn’t been available that long.

[@marypolancodesigns]

SOOOO LONG hahah

[@marypolancodesigns]

I first saw it in Jan 2020 and have been waiting for it to come out.

[@melodypatrick7806]

Can you run an Accuquilt die through the switch like the Big Shot Plus?

[@marypolancodesigns]

I'm so sorry I'm not sure what that is so I don't know.

[@mavissmith9963]

Hi hi I have this machine and was using it and the plates started. Jumping in machine, scared the life out of me.anyone know why this would happen?

[@marypolancodesigns]

Hmmm I'm not sure. Possibly your dies are too close to the edges; try moving them around a bit more.

[@madebydpc]

Hello I’m new to the Sizzix world. What weeding tool are you using? Where do you get them? Also do you a video cutting thicker material such as faux leather?

[@marypolancodesigns]

These are the 2 or 3 tools I use to week out my image. The sharp one with the curve and the silicone cup are a must for me now. It makes things so much easier. amzn.to/3KcTsKC

[@tracie70]

Great video. Thank you. Will you replace your Gemini with the Switch? Is there a reason to have both machines?

[@marypolancodesigns]

Yes I did replace it; it's a lot quieter too in my opinion.

[@kimbradford]

Thank you for the video. I have a question. There is a review of this machine on one of the sellers that said Sizzex would not honor the warranty because a Magic Mat was used. When you used two Magic Mats how did it do? Are you afraid you may have voided your warranty? Thank you.

[@marypolancodesigns]

Hi there, great question. I haven't had any issues with my machine using the magic mat although I understand why they would void the warranty if used with a product they didn't research for their machine. If i use 2 magic mats, I use them as a replacement for the plates and then see what kind of additional shim I might need for added pressure.

[@t.s8113]

Thank you Mary for the review. I have finally found the die cutting machine for me. I love it, although I didn't hear you say anyting about embossing. Does it emboss? Thanks for the video. ❤❤

[@marypolancodesigns]

Yes you can emboss on it. The main platform has pictures of your sandwiches that you would use for embossing with folder. Great question!

[@annihilator45]

I love my switch! I have the cantaloupe colored and I am just so pleased with it!

[@marypolancodesigns]

Ooooh cantaloupe...is that the blossom or a different one.

[@annihilator45]

@@marypolancodesigns it looks like the color of a cantaloupe on the inside. I don't know the name.

[@sharonpeterson2137]

Thank you for the helpful review, really appreciate it. What tape do you use to secure your die cuts?

[@marypolancodesigns]

I don't remember what I used in that particular video but this is my favorite to us: shrsl.com/494u8

[@eibs9551]

Can anyone tell me what I am doing wrong? My Sizzix Switch machine leaves marks on the top of my card after I run it through the machine.I have tried several difference card thickness. I own a Gemini junior, a Gemini go and a Cuttle bug and none of these machines mark the top of my card. For this reasion I no longer use this machine :( Its is like the rollers inside the machine are too thight ...any suggestions please?

[@marypolancodesigns]

Try using another piece of cardstock over your project or card to protect it. When the plates get divets or grooves from the dies over time, they will transfer those marks to your paper. This might help protect them a bit more.

[@lindabourne6317]

can i use my magnetic platform from my big shot

[@marypolancodesigns]

I cant see why not but if it's not listed as something to use you might affect the warranty

[@mia707]

Great video. Great tips. The Switch is a must for me - when I can find it in stock. Also love the large alphabet die but can’t find it for sale anywhere.

[@marypolancodesigns]

Thanks so much Mia. No that large alphabet die is not for sale anymore unfortunately. Here is one that is very similar. shrsl.com/3npvx

[@mia707]

Thank you so much for taking the time to reply. I’ll check out the other die

[@mia707]

I’d even buy a pre owned alphabet die if I could find it.

[@w3ndi973]

Reminds me of the ebosser - I wonder if it’s the same company?

[@marypolancodesigns]

I don't know; I haven't heard of that. hmmmm

[@carlaheller9253]

Great information, does this machine also emboss?

[@marypolancodesigns]

Yes indeed it does; there are two different sandwiches depending on if it's a 3D or standard embossing folder

[@barbluecht3500]

Hi Mary thanks for sharing… is there a difference between the cherry pink and black Tim holtz machine

[@marypolancodesigns]

No difference that I know of except the black one has a designers name on it

[@monicasaez2078]

Great demo! What brand is that beautiful heart die you used?

[@marypolancodesigns]

Oh thank you! That's from a Hero Arts monthly set years ago. I don't know the name.

[@vickigersey8138]

Mary, if I didn’t have 6 machines already, I would probably buy this machine. For me the Gemini machine is a pain with all if it’s “sandwiches”. Thank you for your review.

[@marypolancodesigns]

Hahah...I hear you on the 6 machines. And I know about the sandwiches...too much! LOL

[@DrgnflyDrmz]

Just when I thought I didn’t need ANOTHER die cutting machine, now I know I need the pink to go with my purples and gold! 🤦🏻‍♀️😆

[@marypolancodesigns]

Oh no...hahaha I'm sorry! BUT that does sound like a glorious combination you have there.

[@furios2595]

DO YOU KNOW IF I CAN USE THE WOODEN DIES_

[@marypolancodesigns]

I've never seen a wooden die so I'm not sure.

[@genamariehoward2753]

3d embossing folders???

[@marypolancodesigns]

I need to buy one to try it out!

[@anitalegasse4144]

Do you know if you can use the hot glimmer platform with this when you want to do some HOT FOIL.

[@marypolancodesigns]

I do not know this I'm so sorry!

[@susanhammitt7080]

I love my magic mats, saved me so much on plates.

[@marypolancodesigns]

Same!!! I can't wait to get my big ones! YEEEEE

[@caroleanderson1106]

I have an Empress cutting machine and love it. When the plates get warped I just set them under the Empress to flatten them out. It has a magnetic mat that will sometimes warp, so I just stick it on the fridge for awhile. But, yes the plates are very expensive. I prefer the electric cutting machine, because I'm too lazy to crank them threw. Well done, Mary. I'm sure you will love your Switch machine.

[@marypolancodesigns]

I'm the same, I do not like cranking them through anymore. Over it! lol

[@lizzystitch4842]

Excellent review, Mary! Thank you! Now, I will wait a while for price and inflation to come down. Looks like this machine is well-calibrated so it won't break dies and warp embossing folders like my Gemini has. Grrrr!

[@marypolancodesigns]

YES this inflation costs are cray cray! lol Good call!

[@karenjohnson3495]

Yes the Gemini warps plates big time. I broke my first one and they wanted those plates back

[@HeidiLilley]

It looks like an amazing machine. I wish I could justify the price to make the purchase, but I have a gemini jr and a bigshot already and I do not make enough cards to warrant getting anymore at this point in my cardmaking career. I would get it if there was anyway I could. oxox

[@marypolancodesigns]

Oh totally, it's not a need particularly if you have something that works great. I know so many people asked me my thoughts on this.

[@carolschlabach9826]

Mary, would you recommend this for a newbie? If not, which one? I want to die cut and emboss both.

[@marypolancodesigns]

I recommend this machine for everyone especially if you want to emboss and die cut. This machine is quieter than the Genini and fit ALL kinds of dies

[@KarenLeanneCreates2024]

Mary, I just bought a peach one today from Hobby Lobby! I looked at it a couple weeks ago, and it was still there! But they don't have any more. I am also thinking of getting the Spellbinders hot foil machine to use with it, but am trying to have some self control! Anyway, thanks for your tips! The only die cutting machine I ever used was a 24" wide commercial plotter. We used to make advertising balloons and tents. I'm really glad I bought this, only it would be great to have it handle computer generated cuts. Only I don't want to buy a Crickut because it is a paid subscription. Still, I think I'll get a lot of options here.

[@marypolancodesigns]

I think you have a lot of options here too! Also the color that you got is so pretty.

[@TheCreativeChica]

Thanks for the review Mary! That's a beautiful machine. I wish I had room for it. Still using my foldup cuttlebug.

[@marypolancodesigns]

Oh I love that they fold up; i Have a Spellbinders like that; space saver

[@karenjohnson3495]

The cuttlebug is not strong enough to cut dies like the new Switch machine. I always cut on a different machine and emboss on my cuttlebug. I own three of them and I am glad I bought them before they stopped making them. Yesterday I just ordered my peach switch. It will be fun to use a new machine.