Master the Shine : C6 Ceramics Unveiled ft Yvan Lacroix

Master the Shine: C6 Ceramics Unveiled ft. Yvan Lacroix.
✅ Click here to purchase the C6 Hydro Lite ceramic coating: bit.ly/3yeW0Wh
In this video, we do a deep dive into the bleeding-edge technology behind the new C6 Ceramics, as well as giving tips for their application and maintenance!
Join us as we dissect the differences between C6 Ceramics and the DIY Detail line of ceramic coatings, empowering you to make the right choice for your vehicle’s protection.
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOr...
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
C6 Hydro Lite ceramic coating: bit.ly/3AXI983
C6 Adhesion Promoter Polish (APP): bit.ly/3UU6OSm
DIY Detail 3 year graphene coating: bit.ly/3URM65R
DIY Detail 5 year ceramic coating: bit.ly/3QARFmy
DIY Detail 8 year ceramic coating: bit.ly/4aaiBRa
DIY Detail Rinseless Wash: bit.ly/3URj8TG
DIY Detail Iron Remover: bit.ly/3QCfYR5
DIY Detail clay towel: bit.ly/3WsWdPJ
🇨🇦 For people in Canada:
C6 Hydro Lite ceramic coating: bit.ly/3QFKeKN
C6 Adhesion Promoter Polish (APP): bit.ly/3JUDAfT
DIY Detail 3 year graphene coating: bit.ly/474fKZA
DIY Detail 5 year ceramic coating: bit.ly/454F5AD
DIY Detail 8 year ceramic coating: bit.ly/3KfmiuE
DIY Detail Rinseless Wash: bit.ly/3XomKMu
DIY Detail Iron Remover: bit.ly/43xUXuW
DIY Detail Clay Towel: bit.ly/3YpF74e
🇪🇺 For people in Europe:
C6 Hydro Lite ceramic coating: bit.ly/3Wrtw5s
C6 Adhesion Promoter Polish (APP): bit.ly/4aWAtQx
DIY Detail products: rb.gy/6zv5te
🇬🇧 For people in the UK:
C6 Hydro Lite ceramic coating: tinyurl.com/5n...
C6 Adhesion Promoter Polish (APP): tinyurl.com/mr...
DIY Detail 3 year graphene coating: bit.ly/45xwmHD
DIY Detail 5 year ceramic coating: bit.ly/45by6Gx
DIY Detail 8 year ceramic coating: bit.ly/4aTK2jr
DIY Detail Rinseless Wash: bit.ly/3KJYVcO
DIY Detail Iron Remover: bit.ly/3sgwtZI
DIY Detail Clay Towel: bit.ly/45siGxm
🇦🇺 For people in Australia:
C6 Hydro Lite ceramic coating: bit.ly/4bwwIBq
C6 Adhesion Promoter Polish (APP): bit.ly/3wdiLcm
DIY Detail 3 year graphene coating: bit.ly/3WCsDap
DIY Detail 5 year ceramic coating: bit.ly/3WCGIVp
DIY Detail 8 year ceramic coating: bit.ly/3ygUCCB
Other DIY Detail products: bit.ly/3W33SUr
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
If you want to become an authorized C6 Ceramics installer, visit their website here: c6ceramics.com...
Watch more videos below:
✅ Me taking delivery of my new Porsche Cayenne: • UNVEILING MY BRAND NEW...
✅ Decon wash of my Porsche Cayenne: • 2024 Porsche Cayenne F...
✅ Application of the C6 Ceramics Hydro on my Porsche: • My New Porsche Cayenne...
✅ The DIY Detail KZbin page: / @diydetailofficial
✅ The C6 Ceramics KZbin page: / @c6ceramics
All the C6 Ceramics are made in the USA and have the following components in their chemistry:
Polysilazane - chemical resistance, marring resistance
Silicon carbide - adds gloss and chemical resistance
Silicon dioxide - gloss, slickness
Silicon nitride - adds flexibility, resilience, and prevents fracturing
Refined detonated nano diamonds - prevents fracturing, adds water spot resistance
Chemical resistance: pH 2-13
1 hour curing time
After the application, wait 7 days before washing the car again
To ensure maximum performance and durability, use the C6 Ceramics Adhesion Promoter Polish (APP) before applying the ceramic coating.
Differences between Hydro and Hydro Lite coatings:
Hydro:
- lifetime coating
- high spots are tougher to deal with if you get some
Hydro Lite:
- 6 years durability
- contains less Refined Detonated Nano Diamonds
- easier to apply (high spots are easier to deal with if you get some)
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicso...
👕 My merchandise store: pantheorganize...
📲 Follow Pan The Organizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganize...
🎶 Intro music by Hurley Mower
/ hurleymower
#C6Ceramics #Hydro #DiamondGloss #CeramicCoating #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

[@PanTheOrganizer]

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: C6 Hydro Lite ceramic coating: bit.ly/3AXI983 C6 Adhesion Promoter Polish (APP): bit.ly/3UU6OSm DIY Detail 3 year graphene coating: bit.ly/3URM65R DIY Detail 5 year ceramic coating: bit.ly/3QARFmy DIY Detail 8 year ceramic coating: bit.ly/4aaiBRa DIY Detail Rinseless Wash: bit.ly/3URj8TG DIY Detail Iron Remover: bit.ly/3QCfYR5 DIY Detail clay towel: bit.ly/3WsWdPJ 🇨🇦 For people in Canada: C6 Hydro Lite ceramic coating: bit.ly/3QFKeKN C6 Adhesion Promoter Polish (APP): bit.ly/3JUDAfT DIY Detail 3 year graphene coating: bit.ly/474fKZA DIY Detail 5 year ceramic coating: bit.ly/454F5AD DIY Detail 8 year ceramic coating: bit.ly/3KfmiuE DIY Detail Rinseless Wash: bit.ly/3XomKMu DIY Detail Iron Remover: bit.ly/43xUXuW DIY Detail Clay Towel: bit.ly/3YpF74e 🇪🇺 For people in Europe: C6 Hydro Lite ceramic coating: bit.ly/3Wrtw5s C6 Adhesion Promoter Polish (APP): bit.ly/3wdiLcm DIY Detail products: rb.gy/6zv5te 🇬🇧 For people in the UK: C6 Hydro Lite ceramic coating: tinyurl.com/5n7rwwzy C6 Adhesion Promoter Polish (APP): tinyurl.com/mr3dx6va DIY Detail 3 year graphene coating: bit.ly/45xwmHD DIY Detail 5 year ceramic coating: bit.ly/45by6Gx DIY Detail 8 year ceramic coating: bit.ly/4aTK2jr DIY Detail Rinseless Wash: bit.ly/3KJYVcO DIY Detail Iron Remover: bit.ly/3sgwtZI DIY Detail Clay Towel: bit.ly/45siGxm 🇦🇺 For people in Australia: C6 Hydro Lite ceramic coating: bit.ly/4bwwIBq C6 Adhesion Promoter Polish (APP): bit.ly/3wdiLcm DIY Detail 3 year graphene coating: bit.ly/3WCsDap DIY Detail 5 year ceramic coating: bit.ly/3WCGIVp DIY Detail 8 year ceramic coating: bit.ly/3ygUCCB Other DIY Detail products: bit.ly/3W33SUr Watch more videos below: ✅ Me taking delivery of my new Porsche Cayenne: kzbin.info/www/bejne/nmeWn2Z7h6-DZ9E ✅ Decon wash of my Porsche Cayenne: kzbin.info/www/bejne/mYqceImEnNp_mNk ✅ Application of the C6 Ceramics Hydro on my Porsche: kzbin.info/www/bejne/r6vMiYSkfat0o6M

[@CodeMonkeX]

How is Yvan making so many videos? I could swear I see him in a new video every day from all over the world.

[@butchc9226]

I see the same lol

[@mdoyal111]

It shouldn’t be surprising that the king of efficiency maximizes his time!

[@chrisbradley3224]

Yvan’s actual trick is he’s figured out how to clone himself 😂.

[@chrissilvestri3642]

He has a twin brother

[@diydetailofficial]

All good answers, I’m doing what I love, so it’s easy to be busy

[@steveclark2426]

I’m an authorized installer in eastern Ontario near Quebec border. I’m really impressed with how C6 hydro performs, I installed it last weekend on our personal car and have done approximately 400km in rain and dirt roads and it definitely keeps the dirt from sticking. This weekend will be the 7 day wash. Looking forward to seeing the water behaviour. Awesome products and love the informative videos that Pan and Yvan offer!

[@PanTheOrganizer]

Thanks Steve! And yes I also have to agree that it stays cleaner compared to other coatings, and the hydrophobics are insane!

[@diydetailofficial]

Thank you

[@johnough4893]

I have to say that when you first showed the car, at the car dealers, I wasn't that impressed by the chalk colour. But now, after your decontamination wash and Ivan's ceramic coating, I've changed my mind. It looks fantastic with that gloss. And what water beading! I don't think I seen anything better. Thumbs up!

[@PanTheOrganizer]

Yup, a new car is never new until it's fully and properly detailed. And yeah the end results were breathtaking and looked even better in person. The camera doesn't quite do it justice.

[@diydetailofficial]

Thank you

[@RemedyAutoDetailOfficial]

Authorized C6 installer here in the Finger Lakes Region , NY with Remedy Auto Detail! Pan and Yvan always making informative videos! Thank you guys!

[@diydetailofficial]

Thank you

[@PanTheOrganizer]

Thanks for the feedback!

[@deeelle6567]

I'm a detailing newbie and love how Yvan/DIY Detail are so committed to helping customers get great value for cost and emphasizing time savings, cost savings, and general efficiency with the detailing process. Yvan has such a high degree of domain knowledge and sales experience purely based on education rather than flashy promises.

[@PanTheOrganizer]

I totally agree! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@diydetailofficial]

Thank you.

[@en1254]

Yvan's knowledge is insane...provides the information and backs it up...between Yvan and Pan guiding you...can't go wrong...

[@PanTheOrganizer]

💪🏻👍🏻

[@diydetailofficial]

Thank you.

[@omarstephenson8967]

Hey Pan.. can we see a video of the Porsche outside the garage in direct sun light.. thanks in advance..

[@diydetailofficial]

That would be great, Pans HOA may not approve, blinding passers by with the gloss may not be tolerated.

[@omarstephenson8967]

😂😂😂😂❤​@@diydetailofficial

[@DovetailDetailing]

Dovetail Detailing is proud to be an authorized installer in Madison Wisconsin. Great products from DIY/C6. Thank you Pan and Yvan!

[@PanTheOrganizer]

👍🏻

[@diydetailofficial]

Thank you.

[@rickyrice7376]

I'm soooo glad you're having Yvan on your show. I was sold, after I saw them doing your new Porsche. Product looks amazing. I'm ordering the C6 Hydro this month. Love to the APP, prior to applying the coating, by expanding the paint. Great job Pan and Yvan.

[@diydetailofficial]

Thank you

[@PanTheOrganizer]

Awesome! Thank you!

[@silverfoxsilverfox6932]

​@PanTheOrganizer Hi Pan can the C6 ceramics coatings be applied to ppf, my car is also designo mountain grey magno matte finish.

[@samj6307]

With his last car he applied ceramic over ppf and seemed pretty happy with it in the videos.

[@diydetailofficial]

@@silverfoxsilverfox6932yes it can be used on PPF, vinyl wrap, both gloss and matte.

[@ryanl8653]

Congratulations on 1M!!!

[@PanTheOrganizer]

Thanks Ryan!

[@diydetailofficial]

It’s well earned

[@ocdetailingnc]

I just became an authorized installer the other day. I'm waiting on my first order to come in. I think I'm going to install Diamond on my black Aston Martin Vantage. I'm excited to see the gloss!!

[@bkpensfan]

Great show guys. I loved the more in depth look at the DIY line of ceramics. I have the 3 year on one of my cars and the 5/3 stack on the other. Couldn't be happier with the results. I can't imagine how great the C6 line must be. I will have to wait for my next car to find out. Listen to Ivan on the water spot removal for wheels. My older car is 6 years old and I could never get the wheels back to their original look. The black always looked dirty. I sprayed on water spot remover waited about a minute, rinsed, repeated with agitation with a flag tip nylon brush before rinsing. The result was amazing brought the black right back. Pan, Yvan thank you both. I have learned so much from watching the both of you! Two great channels!

[@PanTheOrganizer]

Thanks for sharing!

[@diydetailofficial]

Happy you found your wheels!

[@davidboyce6427]

I trust your word Pan. Your Word is your Bond👌

[@diydetailofficial]

Very true.

[@PanTheOrganizer]

Thanks for the trust you place in my opinion.

[@davidboyce6427]

@@PanTheOrganizer you bet, Over 20 yrs in detailing and a degree in Biochemistry and Microbiology that is deadly combination 😤 A detailing GURU🫡

[@diydetailofficial]

Thank you

[@PanTheOrganizer]

Thanks for being on the show! Always a pleasure to have you.

[@jcurtis22x]

Authorized C6 installer Joplin, MO Curtis Mobile Detail. Love the products in both the C6 and DIY. I set my customers up with the products to maintain their shine. Pan as always a great informational video.

[@PanTheOrganizer]

Thanks!

[@zachf6256]

Thoroughly enjoying the educational element to this video Pan and Yvan. Understanding the genetics of a ceramic coating is SO COOL!

[@PanTheOrganizer]

Glad you enjoyed it! I always like doing deeper dives into the technology and chemistry behind products so my viewers can benefit from the knowledge. 💪🏻👍🏻

[@diydetailofficial]

Thanks

[@denisem1961]

Hi Pan, I just want to say I think you are an amazing guy. Thank you for all your videos, I have learned so much from you. You explain everything brilliantly. Have a great day 😊

[@PanTheOrganizer]

Thank you!

[@charlesmitchell9647]

Hi Pan, I just became an approved C6 installer. A message for Yvan the guy who did my interview didn't want to really sell me C6 Hydro because I don't charge $2,500.00 for a ceramic coating. I am in Florida in a very populated area of senior citizens on a fixed income. There are some snowbirds with better incomes yes but not overwhelming. I try to be fair and make everyone happy. I feel if a client can afford only so much for a coating but they really take care of their car. Why not give them a coating they can enjoy for life, especially if the are a loyal customer for me. My question for Pan is. For a regular customer who has an average vehicle heard about C6 Hydro and wanted it on his car, what would you charge? I doubt it would be the forgo mentioned price.

[@PanTheOrganizer]

I never discuss prices on KZbin as it's pointless to do so. The same service has a different price for many factors, including most importantly location. A coating job in Montreal won't cost the same in Florida, vs New York or Paris for example. You have to adjust according to your area and competition. It's a discussion you need to have with C6, not with anyone else. Certainly 2500$ is still inexpensive for the quality of coating and durability this provides. This is not your typical 50$ coating bottle with a 1000$ coating job. Perhaps your customer base isn't used to that level of service? Hard to say, I don't know you, your business or the area you work in. But it's not my place to tell people what they should be charging or not. I hope you understand.

[@diydetailofficial]

Charles, thank you for your concern. C6 Ceramics isn’t for every customer. $2500 is industry average for top level coatings. There are many customers, and some are happy to pay for the performance and value C6 Ceramics brings to them.

[@havingtoomuchfun4806]

Dude, if a customs wants a Ferrari, they don’t shop at a Ford dealer. If you’re really a c6 installer, then market it to people who want and can afford the best. If you’re not a good enough business owner to have customers that are suited to high end products, don’t blame anyone else.

[@C6ceramics]

Mr Mitchel, thank you for your concern. We understand your frustration that we did not accept you as a C6 Ceramics installer. Not every detailer has the entrepreneurial skills to perform to the level we need. There is a demand for high quality detailers and products in Florida. In the Tampa bay Sarasota area where your located, there is good consumer demand for C6 Ceramics . There is a long list of customers in Florida that are looking for quality coatings such as C6 Ceramics and willing to pay for the quality service that is offered by authorized C6 Ceramics installers.

[@knightwolf200612]

Very interesting products. Good to see how much car care products evolve to higher and higher levels. Despite the length of the video, it was far from boring! Well done!

[@PanTheOrganizer]

Thanks for watching!

[@404notfound.....]

Yvan nailed it with these products!! Well done video pan & yvan!! 🇨🇦 ✅️

[@diydetailofficial]

Thank you

[@PanTheOrganizer]

Thanks!

[@Teleman01]

I've been going back-and-forth to whether I wanted to put a ceramic coating on my new car. There's no question I am at this point. And I'm definitely deciding with the C6. I do wish I could buy the gloss version. But Im no professional so I will stick with the other one. But they look to be very very good..

[@diydetailofficial]

Thank you

[@JohnC6Ceramics]

Great information in this video! I cant wait to speak to all you potential C6 Ceramic installers located in the USA.

[@PanTheOrganizer]

Thanks John!

[@anythingadrenaline4515]

What are the rules on purchasing this? Do I need a LLC?

[@MyGuyKirby]

Appreciate the talk on DIY ceramics and how they compare, c6 hydro lite still price over what most consumers will afford

[@diydetailofficial]

Thank you.

[@PanTheOrganizer]

It's a high end coating, for those with a bigger budget for sure. But the DIY Detail line has the 3-5-8 year coatings at more reasonable prices for those who are on a tighter budget but still want a high quality coating. We explained the differences between all the coatings in the video.

[@tedk572]

Just reviewed that, much more helpful when you consolidate everything into your top picks so people update their detailing arsenal appropriately. One last video using those 1st place products on a vehicle from A to Z would be so sweet. Hey, at least we hardly have to worry about chrome anymore 😂.

[@edmondmartin9004]

Excellent presentation Pan on the part of Ivan and yourself. These videos are taking over most of my day but I come out of it better informed, better educated and equipped for my clients. Significant progress is being made by you guys and we are lucky enough to be part of it!! Thanks..

[@PanTheOrganizer]

Thanks for the kind words Edmond. I appreciate it. I love giving all the important information to my viewers so they can better understand the processes and do a better job along the way.

[@diydetailofficial]

Thank you!

[@rayvalero8580]

Perfect timing while I eat breakfast! Been waiting on this video, keep up the good work Pan and Yvan!

[@PanTheOrganizer]

Thanks Ray!

[@diydetailofficial]

Thank you

[@Slava-du8dw]

cool informative video from two detailing gurus👍 I want to add that once I tried a decon sponge together with koch chemie tar&bug removal and the chemistry melted the synthetic clay on my sponge and left a black stain resistant to wiping on a white car, it's good that with the same chemistry and microfiber, this stain came off easily.

[@PanTheOrganizer]

With synthetic decontamination towels, sponges and mitts, it's important to use products that are free of solvents. So if your bug & tar remover contained solvents, it would damage the synthetic clay material.

[@Androm3da]

Thanks for the in-depth information! I always enjoy these types of videos. And, it's always nice to see Yvan around on the channel. It's also great that both of you interact with folks in the comments... You don't just post and run. The C6 line looks awesome! I'd like to try C6 Lite on my truck, but back in September, I coated with with CarPro CQ UK and CQ SiC, so I don't want to go through having to remove all that and start over just yet😅 I look forward to your long-term tests with C6, Pan. Maybe I'll try it out next year!

[@PanTheOrganizer]

Thanks for the positive feedback! 👍🏻

[@diydetailofficial]

Thank you.

[@loupedetailing]

Loupe Detailing is an authorized C6 installer in Buffalo NY. We are very impressed with the coating so far!

[@PanTheOrganizer]

Thanks for sharing!

[@diydetailofficial]

Thank you

[@bimmerfan9484]

Hi Pan, I’m a weekend detailer doing details merely as a hobby. I was wondering if I could use hydro lite in this scenario: Decon wash APP one pass (paint is mildly swirled) Then use hydro lite Now my goal is to achieve 75-80% defect removal and high gloss etc. how achievable is this? And what would be the durability of the product? Would it be affected in any way? Also I sometimes use a strong ph cleaner. How long will it take for it to degrade the coating? And also what can I use to revive the coating? Your response is much appreciated Thanks

[@diydetailofficial]

This will work, but ideally a quick pass with DIY Detail Gold Standard Polish first will give you even better results.

[@kic402]

@@diydetailofficial with yellow pad o red pad ?

[@lukask50]

As always love diy detail products and great to see new long lasting coatings coming out. Pan as always great work.

[@PanTheOrganizer]

Thank you! Cheers!

[@diydetailofficial]

Thank you.

[@ATGriz]

Love both your channels. Very informative. Recently coated my Genesis with 3 yr Diy graphine coating. So far very happy. Also just recoated after 3 yrs my wife’s Camry. Used Cerakote. Looks good now. She’s happy. Time will tell. The question is, I wash my car every week. Living in AZ very lil rain more of a light dust. Using Yvans method of foaming the dry car, rinsing, foam again and hand wash. Is this over kill or can I get away with foam and rinse or do you always had wash too? Thanks in advance. Keep up the good work. Thx. Griz

[@PanTheOrganizer]

I always follow up with a contact wash. It’s the only way to ensure 100% clean results.

[@diydetailofficial]

A contact wash is always best, have you considered DIY Detail Rinse Less Wash

[@pipsohio]

I’ve got 2 personal vehicles needing a coating prior to a parade. I’ll be applying to become an installer, and hopefully get involved before this parade. Currently installing another brand and looking for something I can add to my lineup for lifetime kind of folks.

[@briankellerman8902]

Yvan lookin like a Bond Villain about to drop a new song on iTunes 🔥

[@diydetailofficial]

lol

[@PanTheOrganizer]

LOL

[@superado2k]

Eddie @ ECD: " BUSSIN' "

[@PanTheOrganizer]

Yes! That’s it. Bussin! 😂👍🏻

[@diydetailofficial]

Agreed

[@kunnalkhattar]

Congratulations Pan on 1M🎉🎉truely deserve this.keep going keep rocking,one and only Pan the Legend

[@PanTheOrganizer]

Thank you so much 😀

[@diydetailofficial]

Well earned.

[@oliver.79]

Thank you! Very helpful! I was a bit lost on the C6 and DIY product line up. Still not clear what is better, the Hydro Lite or the Stack. And which stack, the 5-3 or the 8-3. Thank you!!

[@PanTheOrganizer]

Hydro Lite is better than the stack. All C6 coatings stand above the DIY Detail coatings.

[@diydetailofficial]

DIY Detail coatings are industry leaders and will go head to head with any coating in the industry. C6 Ceramics is the future of coatings, today.

[@ThisOldDetailingDude]

I can’t wait to install these products! They look just leading edge/ market setting products!

[@PanTheOrganizer]

Yes they are absolutely the bleeding edge in current technology, as far as I know.

[@diydetailofficial]

Thanks Tim.

[@user-lj5wv2tt9d]

I see the term diamond used from other companies as well like Carpro's DQuartz. The $300 price tag of Hydro Lite makes me assume that this is the "first" on the market tax that we are paying for. How does the nano diamond in Hydro Lite stack up against the diamonds in other ceramic coatings?

[@diydetailofficial]

Very different technology, and there is no tax, it’s the cost of the components. Others use straight Detonation Nano Diamonds or Diamond Nano tubes. Our reactive blending and Refined Detonated Nano Diamonds set us apart.

[@m1keY_YOUTUBE]

As expected - a Very interesting video...and everything explained so easy ....brilliant work 🤩 Now I really need this for my vehicle 😍

[@diydetailofficial]

Thank you.

[@PanTheOrganizer]

THANKS!

[@waltabelai7297]

Hey Pan !! thank you for another great episode , especially when you have Yvan on the show. Question , if i already have diydetail ceramic coating 5 years and i applied it about 4 month ago can i put c6 on top of it ?

[@PanTheOrganizer]

No. You’d have to machine polish the old one off, then use the APP to prep the surface and then apply the new C6 Hydro Lite.

[@AshevilleCruzn]

Great Stuff! Do you have a video out there on removing high spots and the fastest/best polishes/practices to use? Thank You!

[@PanTheOrganizer]

I don't

[@diydetailofficial]

Not yet

[@Magpie-1111]

That application looks so so sweet!

[@PanTheOrganizer]

It's so simple!

[@diydetailofficial]

Thanks

[@stevecharnasjr.7241]

Hey Pan! Fantastic video by two legendary detailers. Very educational. I was wondering if you know on the hydro lite, how many vehicles can you get on a vehicle? Would it cover a 2022 GMC Acadia AT4 and 2023 Kia Forte GT? Thank you!

[@PanTheOrganizer]

One bottle should allow you to coat two average size cars. One bottle was enough to do my entire Porsche Cayenne S Coupe which is a fairly big SUV, and we did the paint, trim, glass and massive 22” wheels.

[@Rob12345]

❤that C6 would make my black X5MC look great

[@PanTheOrganizer]

Absolutely!!

[@diydetailofficial]

Agreed

[@FineDetailingAZ]

Trying to decide which one to try. Can you give an estimate in % how different each would be? For example: Diamond coating produces 10% more gloss and Hydro produces 10% more hydrophobic as an example? The hydro looks amazing so how much more gloss do you get with diamond and how much hydrophobic do you lose?

[@PanTheOrganizer]

I haven't seen Diamond Gloss in person, so impossible for me to answer. But according to Yvan, we're talking differences that most people would likely never notice in terms of gloss, as both Hydro and Diamond Gloss are super glossy to begin with. And perhaps you'd see a small difference on a darker colored car. But again, you'd likely need a trained eye to spot the difference. I wouldn't overthink the moment on which one to get. But regardless, you can't try them as a consumer. They are only available through certified installers. The only one DIYers can buy is the Hydro Lite.

[@diydetailofficial]

10-20% is a good estimate

[@FineDetailingAZ]

@@PanTheOrganizer Thanks Pan! I'm a professional detailer....we have a sickness as you know 😄. I plan to test this on my car before selling it to my customers so maybe I'll try one of each! I just applied to be become an installer so we shall see!

[@FineDetailingAZ]

@@diydetailofficial thanks Yvan!

[@PanTheOrganizer]

Cool!! 👍🏻

[@cgpd7507]

Not sure if this was addressed earlier, but what are the possibilities of installing C6 on a previously coated vehicle that is underperforming. Will APP work in that scenario?

[@PanTheOrganizer]

Nope. You would have to machine polish the old coating off, using a traditional compound/polish, then IPA wipe, then use APP, and then apply the C6 coating.

[@diydetailofficial]

Pan is correct

[@andrewr3403]

Awesome video as always Pan! Please do a video on Carpro Dquatrz!

[@PanTheOrganizer]

Thanks Andrew! 👍🏻

[@briantakacs8511]

im just waiting to get some iron removal been sold out everywhere hope i can get some soon

[@diydetailofficial]

We get a batch and it’s gone in a day or 2.

[@briantakacs8511]

@diydetailofficial hehe just my luck always miss out. Thanks for the info I'll keep trying

[@SJP1706]

Tried to check the comments to see if this has already been answered, but can the coatings be applied outside and left to cure for people without a garage or indoor space?

[@diydetailofficial]

Yes

[@kic402]

@@diydetailofficialplease a video for that! 🙏

[@fortworthautodetail]

Authorized C6 installer here in Fort Worth TX, with Fort Worth Auto Detail!

[@PanTheOrganizer]

I see many installers popping out! Awesome!

[@diydetailofficial]

Thanks

[@iamstoffe]

Interesting, using alot of similar ingredients as Diamond Protech which is an amazing coating so lets try and see if this is a good or bad copy.

[@PanTheOrganizer]

It has absolutely nothing to do with Diamond Protech coatings though. Not all coatings are created equal. ;)

[@diydetailofficial]

Very different technology, I was involved in the early development of the NGNT coatings. They use diamond nano tubes.

[@iamstoffe]

@@diydetailofficial interesting, when will Europe get it so i can give it a try 💪

[@JD-sc1gt]

Thank you for the excellent video. I am getting ready to apply the 8 year and 3 year “stack” on my car. My questions are: 1) After applying the APP, what is the window of time I have before applying the stack? 2) What is the maximum amount of time that you can wait before applying the stack after applying the APP? Thank you!

[@diydetailofficial]

After the C6 Ceramics Adhesion Promoter Polish (APP) residue is removed you can start coating immediately or wait up to 48 hours if you’re in a dust free environment. Remember between the 2 stack components, you need to wait a minimum of 2 hours and a maximum of 8 hours.

[@gamer-cq9kv]

Pan in a previous video you mentioned that Kamikaze had incredible luster. I'm looking for a product with the most luster. Which has the most luster kamikaze or C6 hydro

[@PanTheOrganizer]

If you are looking for a coating you can apply yourself, then C6 Hydro Lite for sure. If you want to have your car professionally coated, C6 Diamond Gloss would be the one.

[@trikemike7291]

Good morning sir may I ask you a question you’re so knowledgeable? Can you tell me how to keep clean vinyl I had my motorcycle wrapped and I want to find a way to keep it clean

[@diydetailofficial]

Ceramic Coating to protect, rinseless to wash. The knowledge comes from doing R&D for 40 years.

[@FelixBouchardDetail]

The hydrophobics are something else... It's insane

[@PanTheOrganizer]

I agree!

[@diydetailofficial]

Thanks

[@richardarosso]

It looks awesome.I can see how good it works on the paint.But how about on glass?On the windshield would it work exactly the same ?

[@PanTheOrganizer]

They applied it on my windshield too and it works great, just as good as on the paintwork. You will soon see a 1 month update of the performance of Hydro, and you will see how it does on glass too. Stay tuned!

[@Beyondspotlessauto]

So if you really love the car, can you apply hydro and diamond gloss?, you would apply gloss and then hydro?

[@diydetailofficial]

No, that would be a waste.

[@shawnyanak1684]

Great Video Yvan and Pan!!!

[@PanTheOrganizer]

Glad you enjoyed it

[@diydetailofficial]

Thank you

[@davestewart9146]

Great information and thank you both for the video 👍😁

[@diydetailofficial]

Thank you.

[@PanTheOrganizer]

Thanks Dave!

[@lucaspiroddi7343]

Pan, can i wash my polishing pads the same way you recommend washing microfiber towels?

[@diydetailofficial]

Yes

[@freddrune8315]

Great video. A very good product and interesting information.

[@PanTheOrganizer]

Glad it was helpful!

[@diydetailofficial]

Thank you.

[@DamosAutoDetailingLLC]

Damos Auto Detailing LLC is a Certified C6 installer! Located in Carroll County Maryland

[@PanTheOrganizer]

Cool!

[@diydetailofficial]

Thank you

[@Detailing-With-Love]

Alaska's Authorized Installer here. We are based out of Kenai 👉 3T Detailing.

[@PanTheOrganizer]

Cool!

[@diydetailofficial]

Thank you

[@MrJeffdsmackay]

Well done guys 👏 . Beautiful car Pan Congrats dude. Looks great.

[@PanTheOrganizer]

Thanks!

[@diydetailofficial]

Thank you

[@Anton99997]

Amazing product, Amazing guys!

[@diydetailofficial]

Thank you.

[@ZachPlymale]

Just submitted. This is awesome stuff. Need to try more DIY detail

[@PanTheOrganizer]

Thanks for watching!

[@diydetailofficial]

Thanks

[@PaulNicolau]

Hi Pan, What product would you recommend for high gloss shine and water beading other than ceramic coating? I currently use Meguiar's G200416 Hybrid Ceramic Liquid Wax. It has high gloss but I do not know if the beading properties are good or not. Thank you in advance, Paul

[@diydetailofficial]

DIY Detail Ceramic Gloss does a great job. That said as you can see in Pan’s videos, coatings are easy to apply.

[@skrsys]

I’m a certified C6 installer in Chicago/Western Suburbs

[@diydetailofficial]

Thanks

[@jnlsn01]

Will there be a DIY (Lite) version of the Diamond Gloss? Or is this available for consumer purchase anywhere?

[@diydetailofficial]

There is not a Diamond Lite in the works

[@jnlsn01]

@@diydetailofficial I was unable to find Diamond available on your website, will this be available soon?

[@diydetailofficial]

@@jnlsn01 it’s only available to authorized installers.

[@danielmartin5122]

Hi could you use app with another coating

[@diydetailofficial]

Yes

[@fjoco1]

I absolutely love APP!!!!!

[@diydetailofficial]

Thanks

[@tomamilanovic3534]

Another great video.. Is there Any special Pan discount available on these new products?

[@diydetailofficial]

See the links in the description

[@tedk572]

Gee Pan, wouldn’t be great if you had a yearly top list of everything a DIYer needs to protect and maintain their car? A simple list, what to pre-wash, decon, wash, correct, & protect. Interior mats/plastic/leather clean and protect, tires & wheels clean & dress. That’s it. You review so many products, just have a master list you update yearly, same for tools (keep tools simple). For example: pick the best two-step correction pads and polish this year. Simplify everything, but continue testing new products and pick the best of everything. We watch you so we don’t need to pay a professional.

[@PanTheOrganizer]

I already have my popular yearly awards video which is where you can always find my top product recommendations. And those are extremely long to produce. Everything you need is in there. Here you go: kzbin.info/www/bejne/gYPZaKmBqNqfn7Msi=cAGqdcvp3hFhcvIA I put a lot of time and energy to produce those. The longest running awards show of its kind in the detailing space in KZbin.

[@Campbellmasterson]

One thing I would like to know, how much better is c6 Hydro as compared to Hydro lite. My wife can need a new coating and I'm not sure if I do it myself and use Hydro lite or if I take it to a professional and get the C6 hydro done.

[@PanTheOrganizer]

According to Yvan, there's not much difference between both. Hydro has a bit more refined detonated nano diamonds and different solvents for the carrier fluid. Lite has less RDND and a different carrier fluid to make application easier and no worries of high spots. But in person, you couldn't tell the different visually between both, and hydrophobics are identical. I have videos coming soon with C6 Hydro Lite, so stay tuned.

[@MrVic0629]

Dang it pan your car looks freakin bad af on point bro

[@PanTheOrganizer]

Thanks!

[@diydetailofficial]

Thank you

[@MrYandain]

Hello, Pan! Love your videos and your passion for detailing. I’m going to put the C6 on my car, so my question is how would you recommend prepping my car for the coating. I put on Chemical Guys HydroSlick last fall on my well maintained (washed weekly) car. When putting on the C6 I’ll follow Yvan application process, so I’m looking for your recommendation on removing old coating and prep. Thank you much!

[@PanTheOrganizer]

The only way to ensure 100% removal of any protection is by machine polishing. So you’ll have to decon wash, iron remover, clay, machine polish, paint prep spray, APP polish, then apply the C6 Hydro Lite coating.

[@MrYandain]

Perfect thank you. Do you have a polish you recommend?

[@samj6307]

@Pan how do I find an installer? C6 didn't respond when I tried contacting.

[@adamsdetails]

Where are you located? Installers like myself are in the comments sometimes.

[@PanTheOrganizer]

Yvan said they are finalizing a map of all authorized installers. For now, you can contact [e-mail]

[@ianfortney9965]

For the C6 Hydro Lite ceramic coating, is it one bottle per car? Apologies if mentioned in the video, I must have missed it. We have a Mercedes GLE and a Ford F150 for reference

[@PanTheOrganizer]

One bottle for a large SUV like my Cayenne (we did paint, wheels, glass, and plastics) or one bottle for two average size cars if you do the paint only.

[@ianfortney9965]

@@PanTheOrganizer Thank you for the prompt response!

[@ObiwanKanobi-ew4cb]

Emerald Coast Detail Crew for Florida Panhandle and surrounding areas!

[@diydetailofficial]

Thanks

[@marcosv2958]

I've read the comments about the C6 products being ok on PPF, but is the APP required then, since there is no paint to "open up" ?

[@PanTheOrganizer]

Yvan says yes, you’d still have to use the APP.

[@diydetailofficial]

The C6 Ceramics Adhesion Promoter Polish (APP) provides very deep cleaning.

[@kevind_53]

Super, même pas eu à attendre à samedi!

[@diydetailofficial]

Merci Kevin

[@PanTheOrganizer]

:)

[@stevewood5255]

Loved this video.

[@PanTheOrganizer]

Glad you enjoyed it! Thanks Steve!

[@diydetailofficial]

Thanks

[@canheapravind5052]

Nice info video u both keep it up bro stay bless 🎉🎉🎉🎉

[@PanTheOrganizer]

Thanks!

[@diydetailofficial]

Thank you

[@jaapsmak4994]

hello Pan, I wonder if the cerakote ceramic paint coat has now been improved after the last disillusionment. I also want to know whether I can simply apply cerakote outside on the street in the Netherlands. what is your advice?

[@PanTheOrganizer]

Cerakote released the new version earlier this month. It's now in a clear/frosted bottle, to separate it from the original black bottle. They have more precise instructions now for the application as well, all included in the package. Among other things, application must be done at a temperature of at least 65F (18.5 degrees Celsius). So as long as you are near 20C temperature it's fine. You can apply it outside, but make sure you don't work in direct sunlight. Always work in the shade, on a cool surface.

[@turbo934]

Pan, have you ever looked at Modesta coatings? Thoughts?

[@PanTheOrganizer]

I haven't, as you need to be an authorized installer for their coatings.

[@soapa4279]

Can "APP" be used as a prep for other ceramic coatings or even just spray coatings? The theory behind the opening pores and swelling should work for other things too, right?

[@diydetailofficial]

Yes, it will work.

[@jasonhill9088]

Is it true, the new formula for CERAKOTE PRO ceramic coating is out now?

[@PanTheOrganizer]

Yes, the new version has been released earlier this month. It's in a clear/frosted bottle now, instead of the black bottle, to easily distinguish it from the first version, which was in a black bottle. I am currently in the process of testing it. Everyone who had ordered the first version has either received a free replacement, or they could also ask to be refunded.

[@jasonhill9088]

@@PanTheOrganizer Thanks for the reply! I didn't mean to crash the party on C6 ceramics.

[@PanTheOrganizer]

No worries, but it would have been more appropriate in a Cerakote video indeed

[@rajpatel3513]

Hi Pan, Great video!! I have superglue residue after de-bagding my car before ceramic coating, how do I remove from the paintwork please 🙏

[@PanTheOrganizer]

Here’s a simple tutorial: kzbin.info/www/bejne/iHWUnaWMbr2miZIsi=JPuJ0uvGiU7P1aS8

[@SJP1706]

Where can we purchase in the UK. The link in description is to the USA diy detail page. Are there any current UK suppliers selling?

[@PanTheOrganizer]

I had placed the links for the UK as well. Here you go: bit.ly/3Wrtw5s

[@border056]

Yvan has touched on the blower topic a bunch, stating that it will mask the coating. What if you're using deionized water and a blower? That shouldn't mask the coating.

[@diydetailofficial]

Correct

[@PanTheOrganizer]

He was specifically talking about blowers in automatic car washes, which use a rinse aid and blower. If you use a blower at home, that's fine.

[@FineDetailingAZ]

Do we know the life expectancy of the coating on the glass? I know the APP “opens/expands” the paint but I imagine this doesn’t happen with glass. Should we not expect lifetime for glass?

[@diydetailofficial]

Glass, especially the windscreen is unfortunately difficult to predict

[@FineDetailingAZ]

@@diydetailofficial makes sense, thanks for the reply.

[@NTCeramicCoating]

Authorized C6 installer here in Central City, Nebraska. Nick Robertson

[@PanTheOrganizer]

👍🏻

[@diydetailofficial]

Thank you Nick.

[@martinauclair5154]

Nice job guys it awesome 👌👌

[@PanTheOrganizer]

Thank you so much 😀

[@diydetailofficial]

Thanks

[@MrAdrianmuniz]

Hi - Any certified installers in the Los Angeles CA area? Looking to get C6 Hydro installed. Thanks, Adrian

[@gs_mick]

If these coatings are for big budgets, would PPF not be better? Genuine question!

[@PanTheOrganizer]

PPF and ceramic coatings accomplish two completely different things. PPF is mainly there to protect against stone chips and scratches. Coatings are there to provide self-cleaning properties (making the cleaning of the car much easier), provide gloss and slickness, chemical resistance, UV protection, add hydrophobic properties. So for the best of both worlds, you apply a PPF first and a coating on top.

[@Topgearautodetail]

Yvan be using DIY teleportation device to be all over the world for these videos

[@diydetailofficial]

Who said there is only 1

[@PanTheOrganizer]

LOL

[@86daniel]

Was about to do a Roar coating, considering they are based in my hometown. Now I want this, but not sure I’ll be able to find any pro installers any time soon. I don’t have the tools (not to mention no experience) for polishing/correction, so even if I decided on the Lite version there would still be a pay wall I’d have to breach. What to do?!!!

[@diydetailofficial]

Roar is no longer in Listowel, but we have an excellent installer in Georgetown

[@rbakkify]

When do we get c6 and the app in English? I hope it's soon😊

[@PanTheOrganizer]

In English?

[@diydetailofficial]

They are on the way to the UK