Maytag Stove Repair - Not Heating - Right Front Surface Element

[@jagjitchana4174]

That was a fantastic video demonstration to replace the surface front element!

[@aaronfriesen7664]

Very much I appreciate your video

[@walter6574]

A thing that good service people do when reconnecting the connectors is squeezing the back pard of the connector that makes connect with the element spade. This ensures that there is great electrical contact between the two. To clarify just squeeze the back not the entire connector as the connector will not sip over the spade if the front is compressed as well. To clarify even more, squeeze the back part before you slip it over the spade.

[@chickbaxter]

Thanks! Very helpful.

[@rajmangat0001]

Thanks it helped 😊 ☺️ 😀 👍

[@appliancerepairamerican]

Thank you for Sharing

[@Mrs.UnRefinedTrends]

I have a Maytag with a useless “power element”. I’m not sure if it’s never worked properly or just a waste of stove top space. I wonder if we can change out the power element for a regular one ?

[@chickbaxter]

Thank you!

[@achristian7015]

Replace an element? I found my break (obvious) and used a stainless steel sleeve and crimped it on. Its been working for years now.

[@AN-zk7kz]

Thanks for the video Can I replace an element with two terminals with a one with 4 terminals? Thx

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@YOGiiZA]

Thank you

[@harutanaka3647]

i have a kenmore. one day oven automatically came on at middle of night. burn all the cookware we had store in the oven. so for safety reason, we unplug all the oven wires. now I wish to put it back. do you have wiring diagram?

[@davidbaumfeld359]

I have a Kenmore cooktop. The replacement element for it is a Frigidaire. Although the connections are roughly correct, the size of the wiring clips is not. There are two large wiring connectors and two small on the element. Does this determine location more so than how they came off the old element?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@iceraser1]

Great video, but I'm hoping you might have an idea what my problem is. The surface burners usually work, except when the oven gets hot, then some of them won't work. For example the two inner burners of the triple burner won't work despite it being brand new? Any ideas?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@Rags_and_Riches]

If I want to know size of front two elements. what is the size I should be looking at and part no. I have Maytga Gemini brand.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@RonnieGlenn-w8g]

maytag my right front eye comes on but can't adjust the temp its on high do i need a new eye are what

[@billjones7517]

My 12” element still has continuity but the male connector that comes out of the element is burnt badly. Female is burnt too and I can crimp on new one, but wondering if it’s possible to replace the male piece? Or is that a part of the whole element?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@jackb2542]

great video but your hands blocked the view when you tested continuity, would have been good to be able to see what your doing

[@Appliancevideo]

Noted! thanks

[@vansalai5850]

Yes your hand was blocking I can’t ser

[@davidadames9545]

Exactly! Made the video pointless