Mazda 3 LED Headlights - How To Install (2014+)

NOTICE: LEDs installed on this vehicle were for show car and instructional purposes only. Exterior LED bulb replacements for headlights are not legal for street use in USA. Exterior LED bulb replacements are only legal for Fog Lights in road vehicles and off-road usage. Please check with your specific location's laws before installing and using them in your vehicle.
Like what you see? Find it here:
Premium H11 CREE LED Kit: bit.ly/2PcnMXK
Standard H11 Kepler LED Kit: bit.ly/2V0yLaw
The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com
For purchasing and production information on this LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our KZbin Channel. It's nice to know our customers and friends care!
00:00 - Introduction
00:58 - Headlight LED Installation
07:15 - Building The Connection
11:05 - Outro
⇢ Subscribe: kzbin.info
⇢ Instagram: precisionled
⇢ Facebook: precisionled
⇢ Twitter: precisionled
Thank you,
-PrecisionLED

[@Ads7903]

Fantastic, clear and concise video. This is how all tutorials should be done! Great job.

[@PrecisionLED]

Thank you so much for your positive feedback! We really appreciate it.

[@sabatage13]

If you un-clip the air intake you can access the driver side bulb very easily. No need to take the wheel well apart.

[@ikillfh844]

I don't know why everyone shows it with the wheel off like what is wrong with them lol

[@PureTazr]

Sweet job, you just saved me from messing with a crap ton of wires and stripping and re-wiring. I will be purchasing them for sure love the install video.

[@PrecisionLED]

We are happy to be of assistance. Please, do not hesitate to contact us if you have any questions or concerns.

[@TheStevedie]

I have been researching for hours on how to upgrade my 2015 M3 IGT to LED or HID bulbs. I have the projector housings but halogen bulbs. I did a custom headlight assembly project on my 2004 ranger a few years ago. I learned a lot (forgot a lot since then) But I don't want to go through that headache since I have the housings already and it should be a plug and play application. Your product is the answer!

[@PrecisionLED]

Yes! All of our kits are plug-and-play for easy installation. Thanks for tuning in!

[@marcsmith297]

Thank you for a really good clear video. Keep up the good work.

[@PrecisionLED]

Thank you so much for watching and for the positive feedback!

[@stevelindsay4034]

Thank You I put these in my wifes 2016 Mazda 6 and this helped Thanks again Steve Lindsay

[@TheStevedie]

How have the LEDs held up? I'm thinking about putting them in my 2015 Mazda 3 GT.

[@PrecisionLED]

Glad to hear! Thanks for tuning in!

[@leonardodb2594]

Thanks mate good job, it was exactly what I was looking for.

[@PrecisionLED]

Glad to hear! Thanks for tuning in!

[@ThisIsNotPictureTube]

thank you so much for the tutorial

[@PrecisionLED]

Thanks so much for watching!

[@jasonchan8610]

Really, really helpful thank you!!

[@PrecisionLED]

We are glad to be of assistance!

[@sebastianutria5602]

you said that the the high beam bulbs installation should be the same than this, but i dont see where the high bulbs sockets are

[@shahnoorhossain8107]

Hello, what to do to change headlight halogen bulbs of Mazda BL 2015 hatchback? Thanks.

[@koltanpetty8377]

Thabkyou

[@A_Wolf]

these are for the low beam, are there any for high beam?

[@TheStevedie]

Awesome video. I'd like to do this in my 2015 GT I just need to find a way to justify the cost lol.

[@PrecisionLED]

Please feel free to use the promo code "youtube11" for a discount!

[@Jo060]

Good video. Out of curiosity why do I see some LED set ups that is just the bulb (with a larger metal base than stock) that plugs directly in the harness and done vs a setup like yours that plugs into to wires and has a box. What's the difference?

[@PrecisionLED]

The difference is that a more powerful LED bulb requires a ballast in order to regulate the power that is being pulled from the battery and redirected to the LED system. The LEDs that do not come with a ballast are less powerful / bright lights.

[@lokivato]

@@PrecisionLED nice 👌

[@zeroshifter1]

Will these LED lights blind on-coming traffic? Or are the projector housings sufficient in the 2014 Mazda 3 to direct the extra light down?

[@PrecisionLED]

Thank you for your interest. Projector housings have a physical object in the housing to make a strict cutoff line to ensure there is no glare projecting into oncoming drivers eyes. Also, it is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K or 8000K lights on the road because they are more natural to the human eye.

[@FakeNews953]

I have a 2016 Mazda 3 I sport with drl. Would these improve nighttime visibility compared to the stock halogen bulbs? Would I need to do anything extra besides what is shown in this video?

[@PrecisionLED]

Thank you for your interest. Yes, the CREE Headlamp Kit would increase your nighttime driving visibility by 2-3x. Also, no, you would not need any additional products. The package linked in the description comes with everything you will need to upgrade your halogen lows to LED without any issue.

[@SPENCERMULLEN]

the two links, the one in the description (low beam) and the CREE 9005 (high beam) have listed the same amount of lumens. I could be wrong, but shouldn't the high beams have more?

[@PrecisionLED]

No, that is not the case. The difference of the high and low beam is not necessarially brightness, but the angel at which light projects. The highs project further down the road, however, the brightness is the same as the lows.

[@SPENCERMULLEN]

PrecisionLED thanks for clarifying!

[@kevinmcgrotty6228]

Spencer Mullen what is the lumens rating? I can’t find it

[@sebastiangomez6483]

Would this work on my 2018 Mazda 3 if so, the ones that you change are just the low beams, right?

[@PrecisionLED]

Unfortunately, we do not have the 2018 headlight fitments listed in our database just yet. However, if your headlights are the same H11 fitment used in the video, the installation process would be identical to as shown in this video. You can find this information by reading through your Owner's Manual, or by physical looking at your bulb. Also, yes, you would change out just the low beams.

[@11Greenmonkey]

Does this work on the gs model of the 2015 Mazda 3? Would i need to replace my low beam to have my Drls as am led. Or just my high beam, or both?

[@PrecisionLED]

Yes, this also applies to the GS model. If your DRLs project from the same bulb as your lows, then upgrading your low beams will also upgrade your DRLs. Same goes for your high beam, if your highs project the DRLs.

[@cooperc3809]

Clarification question. These are only the low beams? I would need to then also purchase another kit for the high beams?

[@PrecisionLED]

Yes, the kit installed in the video would only upgrade your lows. If you are looking to upgrade the highs as well, you would also install this kit: www.precisionled.com/premium-9005-cree-led-headlights.html

[@TheCigarCrook]

quick question. I want to switch out the DRL with the 9005... would one of your conversions work? or is it just h11?

[@PrecisionLED]

If your DRL lights project from the same bulb as your high beam, you would want to install a CREE H11 kit, as it is a much more powerful LED. If your DRLs project from an independent bulb, then you can install the 21SMD H11 LED. Direct product links: www.precisionled.com/shop-by-bulb/exterior-leds/h11-led.html

[@ERIC_YNWA]

Does the same method work for the daytime running lights with the high beam?

[@PrecisionLED]

If your DRLs project from the same bulb as your highs, then upgrading your high beam to LED would also upgrade your DRLs to LED. The installation process is virtually identical to as shown in the video, and you can find the proper high beam product here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html

[@KukednLoaded]

The daytime running lights use the high beam bulbs at a lower power. Would LED bulbs work as the daytime running lights or would they not have enough power to turn on?

[@PrecisionLED]

Thank you for your interest. Yes, the LEDs would act exactly as your halogens do and dim when your DRLs are turned on. LEDs have no problem dimming, so this would not be an issue.

[@Italianborn]

i've just seen a few videos where they got that problem instead, putting the led headlight on the daylight wont come on...there were even lot of comment about installing a separate kit to make it work !

[@ezeess7239]

you need an R1 kit if you want to use LED's as both your high beams and DRLs

[@ezeess7239]

choose the R1 option as that will fit mazda cars 2014+ store.ijdmtoy.com/LED-Daytime-Running-Light-Decoder-Relay-Wiring-Kit-p/led-drl-decoder.htm

[@joemacdonald1250]

I lost my DRL when I had the LED installed now I have to turn on my full headlights to get my headlights to work at all ... but I'm still happier with the LED's over the old light system

[@chimaeraSPK]

Is the process the same for the 2014 and up Mazda 3 S that has the adaptive headlights?

[@PrecisionLED]

The process should be the exact same for all 2014+ Mazda 3 vehicles. If there is any difference at all, it would only be accessing your halogen bulb.

[@darryldessa6444]

Hey!man, I have a 2016 mazda & I'm trying to remove the smallest Amber color bulb on the far side of each housing so that I can replace It with this really cool LED I just got. I can see It in this video here, It is this small round white color housing which is holding the bulb in place. Is It even removable???

[@PrecisionLED]

Could you please reference a timeframe in the video where you see this bulb? I believe you may be referring to the parking light, which is indeed typically removable.

[@darryldessa6444]

Thank you for the reply, but I figured It out. Thanks

[@philrussel1221]

can i use this method to change the headlight of my Mazda 3 sp25 2016?

[@PrecisionLED]

Yes, the installation process would be virtually identical. The only difference, if any, would be physically locating your halogen bulbs.

[@syconicstudios7738]

How do you change the high beam bulbs? And do I have to order a second kit to do the low beams and night beams?

[@PrecisionLED]

The high beam installation would be virtually identical to as shown in the video. Yes, you would need to install a completely separate LED kit, which you can find here: www.precisionled.com/premium-9005-cree-led-headlights.html

[@xuimod]

High beam bulbs are a lot easier, you can access both from top of engine bay.

[@foogol123]

I'm assuming the installation is the same for a 2016 mazda 3 hatchback?

[@PrecisionLED]

Yes, the installation process is virtually identical to as shown in the video. The only difference, if any, would be physically locating your halogen bulb.

[@kimchijiji6490]

Is this the same procedure with the 2017?

[@PrecisionLED]

Thank you for your interest. Yes, the 2017 Mazda 3 headlight installation process would be identical to as shown in the video.

[@anxietyvibes]

Is it any good for Canadian weather? Water salt ice snow and extrem cold?

[@PrecisionLED]

Thank you for your interest. Yes, our LEDs do perform in very cold temperatures, and the products are virtually waterproof.

[@ivancespedes4624]

will the daylight running lights will also be white? or do I need something else?

[@PrecisionLED]

We do have listed the DRLs would project from the same bulb as the highs. This means that when upgrading your high beams, your DRLs will be upgraded as well. You can find the correct package here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html The installation process is identical to as shown in the video. The only difference would be accessing your high beam bulb.

[@Dasdagudwan]

Is changing the high beams the same as changing the low beams?

[@PrecisionLED]

Thank you for your interest. Yes, the process of installing LEDs on your highs would be identical to as shown for the low beams. The only major difference would be accessing your halogen bulb. Also, you would install a different LED kit for you highs, which you can find here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html

[@topspot9417]

Are those led or HID lighs? Did not know that LED bulbs have ballasts

[@PrecisionLED]

We only sell LED products. HIDs are considered very old technology. Yes, a ballast is required for any powerful LED.

[@skie6282]

Can anyone say what the difference between standard and premium leds are? Is premium just a little brighter? Is it any better light soread? Its double the price and all they say is its a better look.

[@PrecisionLED]

The main reason customer decide to opt in for the Premium package is it is 2x as bright as the Standards. You can check out a full breakdown here: kzbin.info/www/bejne/m3a2XqWue8qqZpI&ab_channel=PrecisionLED

[@Italianborn]

So are those H11 or 9005 ? I got the same car, ordered some H11 and they don’t fit, couldn’t even plug them in to see if they work cause plug was also different, so now they took those back and they’re sending me another H11 esaxtcly like those...but on my lamps says 9005...?! Any comment ?

[@PrecisionLED]

Your low beams would use the H11 that is shown in the video. However, your highs would use a 9005 fitment. It sounds as though you are trying to install the H11 LED low beam bulb into the wrong portion of your housing.

[@Italianborn]

PrecisionLED Infact i was trying to fit h11 in the 9005 plug lol, now i guess I’m gonna change them both

[@cemilcam]

Great video. How much does it cost? Any shipping to TURKEY? How we can get that? Thanks

[@PrecisionLED]

Yes, we do ship all over the world, including to Turkey. We have an international shipping flat rate of 34.99 USD. Also, the headlights are 139.99 USD. You can find a direct product link in the description of the video.

[@DaTrippySoul]

Hey, if i were to do this to my 2016 Mazda3 iTouring, would it potentially void the warranty? Its a new car and I wouldnt want to void a warranty only a few months old

[@PrecisionLED]

No, upgrading your lighting will not void your vehicles warranty, as it is protected by the Magnuson-Moss Act. I have linked some information on this law below for your convenience. www.impalaclub.com/naisso/magmoss.htm

[@DaTrippySoul]

PrecisionLED thanks so much! also im guessing these are the 6000k bulbs? im trying to decide between the 6000k and 8000k but im worried the 8000k will be too blue for my car

[@PrecisionLED]

We only sell our headlamp kits in the 6000K color temperature, as it is the brightest, with the best nighttime driving visibility.

[@DaTrippySoul]

PrecisionLED ok thank you!

[@jpeter38s]

How do I make sure I'm not blinding oncoming traffic with these?

[@PrecisionLED]

Thank you for your interest. You can always adjust your headlamps to point lower. However, there are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye.

[@RONNiE_poe]

Are the bulbs used for low and high beams?

[@PrecisionLED]

Thank you for your interest. The vehicle uses different bulbs for the low and high beam, which means 2 LED kits would have to be installed. The video shows the low beam installation. However, the high beam install is virtually identical. You can find the low beam package in the description of the video, and the high beam package here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html

[@Tkillagaming]

would this fit mazda 3 2018?

[@PrecisionLED]

Yes, the kit linked in the description would indeed fit your 2018 Mazda 3 as long as your vehicle comes with stock halogens and NOT stock HIDs/LEDs.

[@barbudoac5675]

How to have the headlight and drl on all the time?

[@PrecisionLED]

DRLs are on at all times, even during the day. I am not sure if it is wise to leave your headlamps on at all times during the day as well.

[@barbudoac5675]

PrecisionLED... DrL’s turn off when headlights are on.. my question... is there a way to have DrL’s on when the headlights are on?

[@PrecisionLED]

I do not believe so, as it sounds like the only way to accomplish this would be to adjust your wiring, which we do not recommend.

[@JM-oy5yv]

Difference between DRL and Lowbeams ?

[@PrecisionLED]

I do believe that your DRL would project from the same bulb as the high beam. In which case, the DRL is the same as your high beam, except it is running about 50% power.

[@lukastancic3867]

How to install it on mazda 3 2004-2008 ?

[@PrecisionLED]

Thank you for your interest. The installation process will be nearly identical to as shown in the video. However, you would install a H7 bulb instead. You can find the proper product here: www.precisionled.com/premium-h7-cree-led-headlights.html

[@PrecisionLED]

The installation process for the 2004-2008 Mazda 3 headlamps should be very similar to as shown in the video. The only major difference should be physically locating your halogen bulb.

[@MrYeah88]

What about the Mazda3 model with the Bi-Xenon adaptive headlight? Will it work?

[@PrecisionLED]

The Mazda 3 with Bi-Xenon headlights come with stock LEDs, so no this installation is not compatible, and HIDs and LEDs are not interchangeable.

[@jameskraai9335]

What happened to the link?

[@PrecisionLED]

I apologize for the inconvenience, but we currently have the CREE H11 Headlight product (item in the description) on backorder. The product has been removed from the website for a short moment. I would recommend checking back in a week to see if it is back up, as this is the timeframe we do expect to receive a replenishment of inventory. We thank you for your patience.

[@gabetiri]

do you really need a ballast?

[@PrecisionLED]

Yes, all high power LED kits require a ballast, as a ballast regulates the current to the lamps and provides sufficient voltage to start the lamps.

[@felixdada4416]

How can we get to the W5W light?

[@PrecisionLED]

You can get the bulb directly from our website here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html

[@felixdada4416]

PrecisionLED Do you also have a installation video?

[@PrecisionLED]

@@felixdada4416 You can find the interior LED installation video here: kzbin.info/www/bejne/e6Kocnikac93fck

[@felixdada4416]

PrecisionLED I meant the w5w bulb that goes into the headlight.

[@PrecisionLED]

@@felixdada4416 Unfortunately we do not have an installation video for this. However, you may be able to access the bulb via the high or low beam portion of the housing.

[@alejandrotavel5528]

Are those led bulbs 6000k or 6500k?

[@PrecisionLED]

Thank you for your interest. We only sell our headlamp kits in the 6000K color temperature, as it is the brightest, with the best nighttime driving visibility.

[@namanrawal5849]

This is a dumb question, but how do you get to the passenger side headlight at kzbin.info/www/bejne/qWmVn4Z8Z9KgrdE ?

[@PrecisionLED]

Just pop the hood!

[@classikz]

Why not just take the whole wheel well cover off? Now it looks jacked up.

[@PrecisionLED]

It is not necessary to remove the entire wheel well to access the headlamp bulb. However, if you prefer to do so, that would not be a problem as well.

[@robertbennett2796]

So you dont nees to.cut any wires or anything just simple plug in and attach

[@PrecisionLED]

That is correct, you do not need to cut any wires or modify anything, as we only sell high quality plug-and-play kits.

[@gwlaw99]

Is there no way to connect the bulb from above and not the wheel well? Is that how they replace an oem bulb?

[@PrecisionLED]

It is possible, however, there would be very little room to work with. The wheel well would be the easiest way to access the headlamp.