Rusty Deadlocked Arbor Press Restoration - Restoration Videos

[@meinemechaniker]

Thank you for watching. Don't forget to ''Subscribe'' This is my previous video; 1950's Oil Lamp Restoration - Perfect Restoration [4K] kzbin.info/www/bejne/aXqrXp5ujJV2rsk

[@mertmoon7825]

Are you Turkish or are you living in Turkey

[@meinemechaniker]

I am a world citizen 🌎🌍😉

[@ՀայաստանԵրեվան-գ9ս]

Like👍🏼

[@meinemechaniker]

Thanks

[@MrSneakyGunz]

@@meinemechaniker Crafty to play to the U.S. Like you do.

[@philipwalton4877]

I’m convinced that this guy and My Mechanics are the same person

[@meinemechaniker]

😅 I take this as a compliment. thank you.

[@cesarjoughin]

This is the first video of seen of him, but just from this comment he's getting an instant subscribe

[@jimmyfleebot]

It it was the same person, it would be a smart move financially. Most of his subscribers would be subscribed to both channels since they're so similar, essentially turning one subscriber into two.

[@meinemechaniker]

@@jimmyfleebot I'm not the same person, you can believe that.

[@jimmyfleebot]

@@meinemechaniker Your hands do look a little different... but I'm a suspicious man ha ha. Fantastic channel by the way, love your work. Thanks for making this great content for us to watch.

[@puirYorick]

I applaud the "new handle" for this press. If using that longer handle then you really need a different tool tbh. Speaking of needing a different tool ...that bearing in the test needed full diameter support to reach the outer race for pressing. 💡

[@chrisb8783]

I love how silent the video is. So peaceful and calming!

[@MrGovmentCheez]

I worked in Grand Haven Michigan and I live in the next town over. It's a great City and Resort town. Great place to visit if you are not from Michigan.

[@In.New.York.I.Milly.Rock.]

That is one chunky press! It might have cost only 20 bucks, but with all that work, its beauty is now invaluable. Cheers!

[@somebody-uj9bl]

Great Project But major mistake at the end. If you are pressing a bearing into a hole, just musst press on the outer ring, otherwise you could destroy or damage the bearing.

[@caseyjones166]

What bearing?

[@kevinmeyer5336]

I live 20 miles from Grand Haven MI where this arbor press was made. Beautiful restoration! I'm sure it looks 10x better now than the day it left the factory.

[@ThatDamnFosterKid]

Fellow Michigander here. I was excited to see the Grand Haven Mich mark, too!

[@vickyahmad3539]

@@ThatDamnFosterKid ooklo

[@kajem575]

Home of the singing sand on LAKE MICHIGAN and the now defunct WESTBANK bar where my band 24k played in the mid 80's. We slept on the beach or in our 40' school bus in the state park. Our booking agent's name was Kevin Meyers who is now a professional concert promoter. I remember seeing large DAKE presses on the COAST GUARD docks nearby. Didn't know they were manufactured there. 🙂✌️❤

[@tombradscott]

The fact that your shop is so quiet you can hear the bolts breaking loose is a luxury i will never know.

[@meinemechaniker]

😅👍

[@aoiph]

Thomas there is literally a white noise or some sort of water running the entire video... are you deaf?

[@charlesseymour1482]

Gotta get a quiet place. Great content.

[@buddyhutchins3782]

You talk to much.

[@robbie7741]

Sonunda bir türk restorasyon kanalı bulmak çok iyi oldu.

[@meinemechaniker]

👍

[@jacksnow1703]

Very nice restoration. Thanks for taking the time to film, edit, upload and share it with us.

[@ZantZ]

I swear the most satisfying thing in the world is hearing that bolt pop.

[@MikiStrange]

I had a thought while watching you paint the raised letters. Maybe you could try covering the letters with Plasticine or Blu Tack and then using a small roller to roll the plasticine until the letters show through. This would perfectly mask the letter edges and when the paint is dry just peel it away to show perfectly painted letters. It's got to be easier and neater than freehand painting. All the best and thanks for the videos.

[@meinemechaniker]

thanks for the idea.

[@GrommiD]

Had the same idea with a slight difference in details.

[@avago2day]

Absolutely outstanding, it was like watching magic happen before my very eyes. There must have been a tremendous amount of work that we didn't see.

[@meinemechaniker]

thank you, you are right. Sanding scenes you watched for 4 seconds may have lasted 1 day.

[@iispjhanna]

If I had THAT one it would go in my show case and my cheap HF would stay on my work bench. Very nice, thanks for sharing.

[@martyb3783]

This is a man who does not like sharp edges, burrs or casting flashing. Well done.)

[@randyclyde4939]

Catching up on some older videos, this was IMPRESSIVE! The attention to detail and the care you showed while working on this piece was wonderful! The results were fantastic! Be well, be safe!

[@meinemechaniker]

Thanks 🙏🏻♥️

[@Voyager_AU]

Great job; I love your attention to detail. You take off the sharp edges, clean even "unimportant" parts/spots, and smooth everything down. I enjoy your work.

[@meinemechaniker]

Thank you 👍

[@ahmadaliisah8597]

This guy is the next "My Mechanics", he is really good. I enjoy all his videos

[@meinemechaniker]

Thank you ALİ 🤗

[@gokhanyazman517]

Mükemmellik detaylarda gizlidir.....ellerine sağlık....

[@josephalexander3884]

I am particularly impressed bye your attention to small details. Highlighting the lettering, adding the contrasting paint to the polished faceplate, and adding the flag decal to the faceplate. Exquisite work. Thank you for the time and effort you invest in your projects, and sharing them with us.

[@rbyaldrzee6657]

Beatiful 👍

[@MovieCharactersTop]

again a great project, I am watching your work with admiration :) @MyRestorations

[@meinemechaniker]

👍

[@davidfrank2824]

That really turned out fantastic. I cannot believe you were able to get it working again without any major parts. The way it used to work you could have got it done without no parts but the way you went was really worth the time and expense. That is actually something you could keep in your home. I know around holidays people put peanuts out this would make a good nutcracker. I just don't know with how good it looks that I would want to use it in the garage. If anything I would keep it on my workbench in the house. That one I don't get so involved is dirty crazy parts I normally do more electrical work in the house on my bench and gunsmithing. Cannot wait until your next project.

[@taytase]

Your painstaking attention to detail is truly amazing. I literally always enjoy the end results. Thanks!

[@Bruno-eq7rd]

You are the best. Far away from the others.

[@byOldHand]

the magician is working again. great !!!!!

[@meinemechaniker]

thank you, it's your turn to wizard. I'm waiting for the anvil and its stand.

[@byOldHand]

@@meinemechanikercoming in a couple days 🙏🏻🙏🏻🗜️⚒️🌿🌿

[@africanelectron751]

Pain stripper, rust remover than sand blast?... I love the way you debur the castings, really classy.

[@DavidCadena-h1l]

Just like mymechanics, the attention to detail stands out. Well done Sir 👏

[@meinemechaniker]

Thanks a lot

[@terrystover7365]

I've used one of those many times in different factories over the years. You made that piece a thing of beauty.

[@grumpfcatarso2453]

Better than new👍

[@meinemechaniker]

👍

[@CanadairCL44]

Restoration perfection! I always treat my tools as I would treat my best friend, so they will never let you down. How anybody could have let that arbor press get into such a bad state is a mystery to me! Excellent job, my friend!

[@meinemechaniker]

thanks, I think that tool has been forgotten

[@anonymous-mj8wb]

thats absolutly incredible.

[@neraklrllessur8844]

New handle is much better!

[@meinemechaniker]

Thanks

[@alexanderalbach468]

Ich bin Laie und gucke mir Restauration Videos gerne, aber kritisch an. Ich finde my mechanics und tysy tube einsame spitze. Aber du setzt echt noch drastisch einen drauf! Chapeau! Wow! Ingnieurskunst vom allerfeinsten. Und auch wenn man nicht die ganzen Tools hat, abgucken und lernen kann man immer was!

[@meinemechaniker]

Du hast recht. aber tysy 🤔

[@alexanderalbach468]

@@meinemechaniker yepp, die Jungs sind klasse. Auf dem Level ist die Luft recht dünn, wohl nicht nur auf yt. Macht einfach richtig Spaß das zu sehen! Und gibt sicher nicht nur mir einen Anreiz. Viele Grüße aus München, schönes Wochenende!

[@ecleveland1]

I like the new handle much better than the original.

[@terryrogers1025]

Your attention to detail is commendable young man. The handle with the threaded on heads on each end plus installing the o ring dampeners under each head was an, as simple as it was, excellent upgrade, thanks for the video sir.

[@meinemechaniker]

🙏🏻

[@whodoneit218]

That thing looks pretty enough to date!!

[@leahcole8672]

Oh it's so weird seeing Michigan (my home state) tagged in this? Love it though, absolutely beautiful work 😍🖤

[@michaeld9731]

Fantastic work! It belongs in a museum now.

[@marcosufarte1017]

Good restoration.

[@ecalzo]

IMPRESSIVE job... WOW .. very well done ..

[@meinemechaniker]

Thanks

Very very good restoration. The handle you made was more original. Good luck brother. You are perfect.

[@meinemechaniker]

Thanks mate 🙏🏻

[@ahobimo732]

Meticulous work. Glorious results. 👍👍👍

[@TerryStover-k3h]

I love to watch your videos, mainly because you are so very good at restoration. This was really impressive.

[@meinemechaniker]

Thanks

[@22763344]

Señor Mechaniker: decir bueno, es decir demasiado poco; sobradamente excelente. Acabado impecable.

[@meinemechaniker]

Muchas gracias

[@Johnnyreborn]

So focused on small details ! Perfect restoration !

[@meinemechaniker]

Thanks

[@robertpearson8798]

Nice. A very common and useful mod for these is to mill or grind the bottom two teeth off of the ram to allow it to ratchet in the full up position. This allows you to position the handle better for leverage.

[@user-A-A-RON]

You should get a hobby powder coating set and powder coat some of your projects. It will be way more durable than paint. Just an idea. Great job.

[@BONvivan8]

Очень крутая работа👏🏼👏🏼👏🏼 вы молодец, какое внимание к деталям👍🏼👍🏼👍🏼

[@neraklrllessur8844]

Beautiful! Everything to perfection! You always go the extra mile to ensure everything is top quality!

[@dave3156]

Another beautiful restoration--better than new!! Excellent touch with the flag! Thanks for sharing another enjoyable episode!!

Love the care for detail!

[@bigpete4227]

This is your best yet.

[@oleque1]

Clean job. Very nice

[@ΘεοφιλοςΧρυσικοπουλος-σ1τ]

Εξαιρετικός τεχνίτης!!! Εξαιρετική δουλειά!! ΜΠΡΆΒΟ!! 👌🇬🇷!

[@meinemechaniker]

ευχαριστώ φίλε. από πού είσαι στην Ελλάδα;

[@toniatalley1977]

Beautiful job

[@MichaelBradley1967]

Using a Torx bit on an Allen head bolt is risking stripping them both. Also, the "new handle" is too short. There's a reason these things have such long handles.

[@chriscyrus2983]

Excellent job great marksmanship

[@onmolder]

Mükemmel. Elinize sağlık. Güle güle kullanın.

[@meinemechaniker]

teşekkürler

[@MrSigmaSharp]

His great patience pays off

[@meinemechaniker]

Thank you so much 🤗

[@moshebron2105]

Beautiful new handle. I would've Knurled it

[@tituspullo9210]

Knurled and nickel plated.

[@nagato8152]

Cute arbor press

[@rirkc]

Bu son boya katı mükemmel! Cam gibi! Teşekkür ederim.

[@BorisIoffe]

You forgot two paper shims under front plate, otherwise excellent job. I got me Dake #0 for $60 from ship maintenance facility in Baltimore, MD. Mine was in better shape. I even kept the original paint job. I ordered 2 sets of paper shims from Dake along with round table. Thier presses are first class.

[@larrykelly2838]

Great restoration

[@meinemechaniker]

👍

[@dingsbums1627]

Großartige Arbeit. Die Presse sieht aus wie neu.

[@meinemechaniker]

Danke 🙏🏻

[@sampathgamage861]

Clean & Nice Work.. 👍..😍.! Rotay Gear Part's Need More Grease... For Long Life Tool..!

[@guataco]

A Dake. Wow and beautiful. Like the handle.

[@meinemechaniker]

Te respondí en portugués antes. Recuerdo y ahora quiero darte una respuesta que recordará tu idioma. bueno tengo seguidores como tu. Muchas gracias. nos vemos en los próximos videos.

[@thefigsedit]

I don't know how I got here but damn, that's a nice video. Amazing job

[@almanzoli1736]

Better than new !

[@LeOn-.-LeOn]

Bizden biri olman çok sevindirici :)

[@DonaTellaVers]

Я уверена, что эта штука была менее красивой, когда сошла с конвейера во время ее производства! Отличная работа!

[@meinemechaniker]

thanks

[@Pizzpott]

The new handle was so much nicer than the original with those awdul circlip syopperd. Glad you decided to use that one instead. Great video and superb restore as usual.

[@meinemechaniker]

Thanks 🙏🏻🌿

[@MauricioGoncalves.]

Nice!

[@nandi123]

You can put clay over the raised lettering, sand it flat to expose metal, paint it , and remove clay to achieve perfectly painted debossed letters.

[@robertclines7519]

Very nice restoration, thanks

[@MadMathMike]

Beautiful restoration! Thanks for sharing!

[@lavluvlov]

Great photography !

[@juniperbelmont]

The new handle is so beautiful.

[@meinemechaniker]

thanks a lot

[@fredbrooks1386]

That is such a beautiful job I would not want to use it. Thanks you so much!

[@meinemechaniker]

🙏🏻

[@kristoffern.9106]

Very Nice restauration, the only part im not thrilled with is the crazy amount of scratches visible on the polished parts. In the future i would recommend using higher amount of grid on the sandpaper before polishing for better finish. Still, the video gets a thumbs up. 👍

[@meinemechaniker]

Nothing escapes his eyes. I surrendered and you are right.

[@pqworks9019]

Very nicely done!!! The end result is beautiful!

[@meinemechaniker]

thank you

[@rdmeenach]

I like the new handles on the control rod. Very beautiful touch. Great color too.

[@meinemechaniker]

thank you so much.

[@ՄենուաԹագավոր]

Good job !

[@meinemechaniker]

You're too fast 👍

[@ElTelBaby]

@ 17:37 U could do with centring the tool in the holder;... that would save some sanding... Leave U more time on doing such a GR8 job... 👍

[@johncarter9067]

Great job

[@richmonk508]

Beautiful!!!

[@georgemckenzie6552]

You are the master. Beautiful work.

[@meinemechaniker]

Thanks a lot

[@TheAnto7A]

you are excellent in all techniques, one of the highest level in all youtube mechanical restoration scenario! Very close to My Mechanics aboslute perfection!

[@meinemechaniker]

Thank you so much 🙏🏻

[@ahujeffrey]

Gorgeous, creative, perfect restoration. This is why I subscribe to this channel. I truly anticipate each and every video that is uploaded. Thank you so much for your efforts.

[@balkanyankee3657]

Restoration Work of Art!

[@meinemechaniker]

👍

[@timbaumgart483]

Another great project and restoration. Thank you for sharing your talent and preserving these little pieces of history.

[@meinemechaniker]

🤗

[@georgeshelton6281]

There was more than one arbor press that was restored. Countless number of them were. The only thing that's different is the product's brand name. 💯

[@andrewturnbull5897]

Outstanding! This is museum quality and far better than an original! Beautiful work!

[@meinemechaniker]

thank you so much 👍

[@THEWORKSSHOP]

Incredible results! Awesome work.

[@bahopp9872]

Great work. Thanks for posting. The new handle is perfect.

[@astralplainer]

You did it again! Perfect restoration.

[@billyfoster3223]

Great work again!😁⚒️🛠️

[@burakmutlu4636]

terrific 👍🏽👏🏼