Рет қаралды 628
Mercedes GL450 ML350 R350 2009-2012 have two common faults with the Electronic Ignition Switch (EIS).
The first fault is a bad solder connection to infrared receptor. That means there is connector inside the EIS that was not soldered well at the factory.
The symptoms are:
No response from the vehicle when you insert the key. No noise, no lights, as if you did not insert the key into the EIS. You get a no crank no start situation.
This video shows how we know if the repair was successful. Do not try this if you cannot save your data first. It will cost much more to replace your EIS than to repair it.
The second issue with these EISs is a CAN high over voltage issue. You can view the video here:
• Mercedes Benz GL450 ML...
The symptoms are not similar to the first issue.
You do get a response when key is inserted.
You get red and yellow dash lights when the key is turned to position 2 in the EIS.
No crank, no start. However, after disconnecting the battery, or the EIS, then reconnecting it... you will get a crank and start.
If it started; while driving you will get error messages on the cluster.
"Drive to workshop without shifting gears." SRS light ABS light. Some report this happening more frequently in colder temperatures.
If you need help with either of these common issues, we can help.
Call us 818-510-3375
or visit our website: mercedesbenzspecialist.net/