MORE WELDING AND FABRICATION VIDEOS HERE:kzbin.info/aero/PLfbf78fMz9Vol0uX2-GNc6mLi75zpqb5f LEARN HOW TO WELD VIDEOS HERE:kzbin.info/www/bejne/d3XEYnxpZp56gJI
@counttaco922 жыл бұрын
@Brandon Lund Please can you make a video showing how to make a iron wire storage drawer unit that you fabricate at the top and on the drawers as you solder/weld it?
@BrandonLund2 жыл бұрын
As in a welding wire srorage cabinet?
@jimmywilson1388 Жыл бұрын
I did not know that about the solvent rags…😮 That table turned out amazing… I love that vintage industrial look! Nice work, Brandon!
@BrandonLund Жыл бұрын
Thanks Justin!
@joelsheffield9583 Жыл бұрын
Brandon, you do such a great job of explaining all of your welding and fabrication tricks and tips. I’m teaching myself how to weld and make things and your KZbin videos are tremendously helpful to me! Thanks!
@BrandonLund Жыл бұрын
I appreciate that Joel! Thank you!
@ricovargas85023 жыл бұрын
Wow!!! Don’t know why I watched the whole video. Great video and table👍👍 I forgot what I was looking for on KZbin 🤣
@BrandonLund3 жыл бұрын
Hahahahaha Im glad I'm not the only one....I start out looking how to fix a tool and before I know I'm 40 minutes deep watching someone teach me how to cook chili. It happens lol. Thanks man I approciate it @Rico Vargas
@jimmacsuga25922 жыл бұрын
A good friend of mine would like me to make a dining table and bench. Metal framework and wood surfaces. Wow, this is right up the alleyway of ideas and plans to make that happen!!! So glad I have been perusing your old videos (to me) and I will look at more!!! What great advice!!! And, your PPE comments saved me an injury in that I have been following your advice and putting on protective gear in even the smallest or quickes of times to grind or weld or whatever. A chunk of metal came off when grinding the other day and imbedded itself in my goggles!!! That could have been a real problem!!! Thank you!!! Be well, be safe, be Blessed!!!
@stevesoto88022 жыл бұрын
So much help even 2 yrs later. Thanks big dawg! 🤙
@BrandonLund2 жыл бұрын
Thank man!
@javiervelasquezjr79064 жыл бұрын
Sometime people don’t have anything positive to say Brandon, you just keep doing the great job you are doing!
@BrandonLund4 жыл бұрын
Thanks man! Appreciate your support and positive vibe! 🙏👍😁
@jzeerod3 жыл бұрын
i would say valuewise money about 1500 bucks easily. very nice work. your absolutely correct, the devil is in the details, set up is key. inexperienced peeps, the first mistake they make is thinking something is "easy" it is easy until you start doing it. i found thinking in 3D doing carpentry and such, was something to get used to. makes for a whole new appreciation for the works of others. thank you great video. love it! and nice work.
@BrandonLund3 жыл бұрын
Thanks man I appreciate your support. 🙏 its a great feeling building something and the pride and craftsmanship that goes with it is super rewarding
@franksmiley1984 жыл бұрын
Your professionalism in your job and the years of experience that you are giving us in the comfort of our home is unbelievable. The richness of your words does not let me look at your eyes and I am sorry for the comments that people are making about your eyes. With close eyes, I can listen to you for days if it is not for months and I am sure many of your audience feel like me and we all thank you for your hard work.
@BrandonLund4 жыл бұрын
Thank you very much for your great comment Frank. You made my night. Thank you!
@rogertaylor8615 Жыл бұрын
That looks great and I still love how you explain in detail how to do things
@BrandonLund Жыл бұрын
Thanks so much!
@rogertaylor8615 Жыл бұрын
@@BrandonLund you are very welcome
@whatthefluxwelding40423 жыл бұрын
Good job on promoting PPE. We all think we are invincible until the unthinkable happens. Paying the price of losing a body part is not worth the experience of becoming good at something if you end up losing a EYE or something else. Great Channel 👍
@BrandonLund3 жыл бұрын
Thanks Daniel! 👍
@jeffnatale10842 жыл бұрын
nice build, just started similar one today, great execution
@BrandonLund2 жыл бұрын
Nice 👍
@1sourcemechanical2403 жыл бұрын
Great Job Brandon!
@BrandonLund3 жыл бұрын
Thanks man!
@AntonioClaudioMichael5 жыл бұрын
Another great video brandon
@BrandonLund5 жыл бұрын
Thanks brother! I appreciate your kind words!
@oldyspices3 жыл бұрын
Thank you very much for the tips @14:20 that’s something I don’t know about it.
@BrandonLund3 жыл бұрын
Thanks man!
@caracarametal3 жыл бұрын
so glad I found this! I've been planning to make a console table for my office and I can now just follow your video exactly. Thanks again for the great content!
@BrandonLund3 жыл бұрын
Thanks Ryan! I appreciate it! 🙏
@robbertwerk3733 жыл бұрын
WOW sir, this is exactly what i have in mind for my new coffeetable! I hope you dont mind me "stealing" your design!. You also got a new subscriber!
@BrandonLund3 жыл бұрын
Thanks for the sub and I dont mind at all! 👍
@AntonioClaudioMichael5 жыл бұрын
Very good talk over video bro
@chrclmnky5 жыл бұрын
World class skills producing world class results as always. New subscriber here from the Philippines.
@BrandonLund5 жыл бұрын
Thank you very much for your kind words and I appreciate the support!
@fatonirmd4 жыл бұрын
thank you for your safety advice
@BrandonLund4 жыл бұрын
Your welcome!
@DereksWorkshopAndProjects5 жыл бұрын
Turned out really nice! Can’t beat a plasma cutter!
@BrandonLund5 жыл бұрын
Thanks! I dont use the plasma cutter often but when I do it's always fun!
@henryrossouw9305 жыл бұрын
great video as usual.Like the fabrication style and the tip on soaked cloths.Always have mine lying around.:) When I was much younger I also ignored wearing goggles, masks and ear protection, but nowadays they are always at hand.Ignore the trolls. they will always be with us.They actually brightens up my life.Just imagine a world where everyone is happy about their lives.Keep up the good work mate.
@BrandonLund5 жыл бұрын
Thanks brother I appreciate your support! I get a kick out of the trolls also.
@ironpug42 Жыл бұрын
awesome work
@BrandonLund Жыл бұрын
Thanks man!
@melgross4 жыл бұрын
When I saw the title, I thought you were talking about a work/layout table. Expectations, love ‘em, or leave ‘em. By the way, is that vise a particular brand, and if so, are you happy with it? I’ve been looking to get one for a while, but most are from unknown Chinese brands, and the others I’ve seen seem to be made by unknown Chinese companies for known, and much more expensive brands, but look to be the exact same vises. I can’t decide what to get. Just a suggestion about routing around an edge. Rout the end grain sides first, then the long grain sides. Otherwise, sometimes, when you reach the end of the cut on the end grain, the wood breaks off at the corner. If you rout the end first, that broken edge is routed off anyway.
@BrandonLund4 жыл бұрын
Great tip on routing THANKS! I never gave it a thought until you just mentioned it. The vise is nothing special honestly. Its a no name Chinese vise I bought about 25 years ago from a discount store. I think I paid less than 40 bucks for it. I've been fairly easy with it but it works awesome and not only does the base swivel 360 but the entire jaw section rotates 360 also. Check out the tools link in the description. I get asked about this vise a lot and I think I have one listed that is the same size and functions the same also.
@melgross4 жыл бұрын
Thanks for responding Brandon. I’ve wanted to buy one of those vises for as long as you’ve had yours. Never did though. I’ve got some good vises, but most at]re standard. A big Starrett is my mane vise, but I’ve got a couple more, including a 4” made in Poland my father got for me 55 years ago. Despite being walloped on, heated with a Mapp gas torch, and other worse treatment over the years, amazingly, it’s still good.
@paulhatch77595 жыл бұрын
Well done
@BrandonLund5 жыл бұрын
Thanks Paul!
@michaelt.93724 жыл бұрын
Anniversary is in 2-3 weeks. This is gonna make an awesome present.
@BrandonLund4 жыл бұрын
Congratulations buddy! This WILL make a great gift!
@michaelt.93724 жыл бұрын
@@BrandonLund alright well my interpretation of square and the world's interpretation of square are two totally different things. Also tape measure measurements. And cutting 45s on angle iron with a portaband sucks.
@BrandonLund4 жыл бұрын
@@michaelt.9372 hahahahaha 🤣🤣🤣 sorry buddy. I feel your pain. Honestly. I actually built a jig for cutting 45's with a bandsaw and it helped a lot. Freehand is difficult and takes a little practice but you got this!
@ktcgarage85725 жыл бұрын
Hey I finished my table and used the rivets. I mentioned you and linked your channel like we discussed. I changed my name from Kevin’s trooper to KTC garage and just broke a thousand subs. I think I did you proud. It turned out great. Thanks for the tip on the rivets Video released today! Thanks man!
@BrandonLund5 жыл бұрын
Great job! That table came out awesome and I appreciate the shout out! I subscribed to you. Keep up the good work brother! CHECK OUT THE PINNED COMMENT ABOVE
@nandish6662 жыл бұрын
Hey Brandon great video .can give details of ur respirator air filter pls
@BrandonLund2 жыл бұрын
Here you go :) www.amazon.com/dp/B000FTEDMM?tag=onamzlunddiyb-20&linkCode=ssc&creativeASIN=B000FTEDMM&asc_item-id=amzn1.ideas.Z1BAGCNWMO0W
@craftybarstool28304 жыл бұрын
Gonna build it thanks
@BrandonLund4 жыл бұрын
Thanks man! Good luck!
@lazydog762 жыл бұрын
Nice table.
@BrandonLund2 жыл бұрын
@Mickey Gentry thanks man!
@aarontheamateur3 жыл бұрын
Did you use the smart stain on the expanded metal, or just the angle iron? It didn't look like you hit the wood with the smart stain either, just the linseed oil. That right?
@BrandonLund3 жыл бұрын
Correct and I did all the metal with the smart stain including the expended metal.
@AntonioClaudioMichael5 жыл бұрын
Great tips Brandon
@wcbessinger4 жыл бұрын
Looks great!
@BrandonLund4 жыл бұрын
Thank you!
@brianmurray667 Жыл бұрын
Great job! Well done video too. I work with wood, so I was wondering do you have any trouble with wood expansion against the angled edging?
@BrandonLund Жыл бұрын
I havent but i also try not to have it fit tight all the way around
@johnnybigpotato24042 жыл бұрын
very nice.
@sergiomancha46542 жыл бұрын
Thank you 🙏 Awsome work!!
@BrandonLund2 жыл бұрын
Glad you liked it!
@renzgrand3 жыл бұрын
Good Work!
@BrandonLund3 жыл бұрын
Thank you!
@AntonioClaudioMichael5 жыл бұрын
The finish is beautiful on the wood
@BrandonLund5 жыл бұрын
Thanks buddy! This weeks episode has some more welding and finish work. I used pine wood in this Friday's episode, but it finished looking like oak :)
@mtrltoolman5 жыл бұрын
Beautiful job Mr. Lund, BTW how to weld steel mesh with a stick welder?
@BrandonLund5 жыл бұрын
Thank you very much. To weld thin metal like mesh, I focus my rod angle more on the thicker metal and wash the puddle up onto the thinner mesh. Hopefully this helps
@mtrltoolman5 жыл бұрын
@@BrandonLund thanks.
@lisagilbert63982 жыл бұрын
Did you remove mill scale before applying the smart stain?
@BrandonLund2 жыл бұрын
I cant remember if I did on this one or not @Lisa Gilbert. I have done it both ways but removing the scale will make the finish last longer and it will be more durable.
@ahbushnell1 Жыл бұрын
Bravo on the safety gear. I have an eye injury too. Not fun! I have lost vision in one eye.
@BrandonLund Жыл бұрын
Thanks man 👍 vision loss is no joke
@mangan69615 жыл бұрын
Great looking table, really nice work. Just found your channel. Makes me want to build myself a table!
@BrandonLund5 жыл бұрын
Thanks man I appreciate your comment and support!
@koreywilliams45704 жыл бұрын
Thats one thing I always catch myself doing and try my best to remember to do is wear my PPE. Even if its just a pair of gloves to use the grinder for a second to hit a corner or for a quick cut. Or the dremel for a second. I'll catch myself and think wait... id better wear gloves. Can't work if I'm injured 😕
@BrandonLund4 жыл бұрын
It only takes a second to get bit. Worst are eye injuries.
@koreywilliams45704 жыл бұрын
@@BrandonLund those are the ones I wanna avoid the most I already need to wear glasses. Last thing I need is a piece of metal or something getting stuck in there.
@BrandonLund4 жыл бұрын
I've had about 8 eye injuries...its no fun 😕
@koreywilliams45704 жыл бұрын
@@BrandonLund 😦 its a miracle you're not blind. Use your ppe bud lol. You must have one awesome eye doctor. 😂
@BrandonLund4 жыл бұрын
Last time was washing my hair...apparently a piece of metal was trapped in my hair and when I went to rinse it washed into my eye. 🤣🤣🤣 I probably couldn't duplicate that if I tried a million times lol. Thats my luck 🤪
@AntonioClaudioMichael5 жыл бұрын
Love the looks like plexiglass square plate you made for your router
@BrandonLund5 жыл бұрын
Thanks man. Good eye! Your the first one to comment on it. I made a homemade shaper table so I made this clear base so it would drop into a recess on the table, but now I just use it as a router base. It gives a nice solid footprint
@AntonioClaudioMichael5 жыл бұрын
@@BrandonLund if it works dont mess with it right
@fernandoamaral44245 жыл бұрын
Beautiful table, nice job!
@BrandonLund5 жыл бұрын
Thank you!
@robertlaw85104 жыл бұрын
I've been trying to build things out of square tubing. I'm using 14ga wall thickness and 1" square. I'm welding using mig. I can put down a fairly decent weld but I'm having a problem when I grind down the weld. The edges of the weld seem to be below the level of the surrounding metal so when I grind it smooth with a flap disk I get valleys and low spots which kind of mess up the look. What am I doing wrong? Too much amperage? Too much of an angle on the flap disk? Or what? I've always enjoyed your welding and fabrication videos. Perhaps you can do one on my problem.
@BrandonLund4 жыл бұрын
Robert Law try slowing your travel slightly so you’re depositing more wire or lower your amperage a little.
@robertlaw85104 жыл бұрын
@@BrandonLund Thank you. I'll try it and see if I can do any better.
@BrandonLund4 жыл бұрын
@@robertlaw8510 Let me know :)
@joshuamaroney2881 Жыл бұрын
Amazing video. Thanks!
@BrandonLund Жыл бұрын
Glad you liked it! Thank you!
@pidgeiam49795 жыл бұрын
Nice job Brandon -Pidge
@BrandonLund5 жыл бұрын
Thanks man!
@AntonioClaudioMichael5 жыл бұрын
Love how the steel has a black look
@BrandonLund5 жыл бұрын
Thanks buddy!
@MannyFontes19685 жыл бұрын
Nice build Brandon!!!
@BrandonLund5 жыл бұрын
Thank you! :)
@minouchat5 жыл бұрын
Like always !!! Nice and useful table, good job Brandon! But i love a bit more what youve done to the street byke. hahahahaha !!! Thank's for your video's
@BrandonLund5 жыл бұрын
Thanks buddy! I really enjoyed the street bike project also. I pretty much get my kicks on fixing stuff.
@suhilmiismail50272 жыл бұрын
Thanks 👍👍
@BrandonLund2 жыл бұрын
Welcome 👍
@tntltl5 жыл бұрын
Love your channel. Keep'em coming.
@BrandonLund5 жыл бұрын
Thank you! I appreciate you watching!
@johncoonradtjr.51414 жыл бұрын
Where did you get the stain for the metal and what is the name of it also.
@BrandonLund4 жыл бұрын
John, everything about the build including product links are listed in the video description. Thanks for watching :)
@BadBuilder2 жыл бұрын
Hey brother yeah wear ppe.. I got permanent eye damage also on my right eye, I can still see with it.. The only thing is it doesn't have focus anymore.. But anyway I really hope your still reading this and you can reply on my question .. I have a similar project but I want the expanding wire mesh to be flush on the angle bars.. That's why I saw your vid.. Any ideas on how to do it? Do think it possible?
@BrandonLund2 жыл бұрын
Thanks man! II like that idea. As with anything there are always a few different ways to go about something. If I were doing it I would weld up the angle frames then set the finished frames on to of the mesh. Then I would trace it around the perimeter and cut it out with whatever you have. Sounds like a nice smooth looking project.
@BadBuilder2 жыл бұрын
@@BrandonLund I got it.. What I did is you will still weld under the angle bars so it still have a good connection with the metal and the mesh. In order to get it flush you'll need a flat bar 2x6" and use it a chisel and hammer each one strands of the mesh on the tip of the angle bar underneath. It will bend down flush to the angle bar. Just be consistent with the force so you could have an even finish.. The finish is surprising good.. Anyway thanks for the reply have a safe build
@joes9732 жыл бұрын
Why did you change to solid wire? Would flux core have worked?
@BrandonLund2 жыл бұрын
It would have worked great. There is just a little less work on cleanup with solid wire.
@YakobShtern5 жыл бұрын
Хорошая работа Брендон !
@BrandonLund5 жыл бұрын
Thank You! Спасибо!
@leoncruse81503 жыл бұрын
The measuring tool you used to figure out how to adjust the settings on your machine, what is that tool called snd where can I get one ?
@BrandonLund3 жыл бұрын
Ask and you shall receive 😁 amzn.to/3iJYm3B
@1GreenRebel5 жыл бұрын
I love it!MORE !!!!
@BrandonLund5 жыл бұрын
Thanks!
@bobbyemery13055 жыл бұрын
Thanks
@BrandonLund5 жыл бұрын
Thanks for your support Bobby Emery
@roselove44305 жыл бұрын
Thank i found ur channel great idea...
@BrandonLund5 жыл бұрын
Thanks Rose Love! I appreciate your support!
@johncoonradtjr.51414 жыл бұрын
What is your price for that, good job
@BrandonLund4 жыл бұрын
$500.00
@1rustytree5 жыл бұрын
Looks great! Nice job!
@BrandonLund5 жыл бұрын
Thank you very much!
@BrandonLund5 жыл бұрын
Thank you very much. I had a lot of fun.
@srenfreiesleben10285 жыл бұрын
This is a really cool project, like this small details you have made :)
@BrandonLund5 жыл бұрын
Thanks man!
@srenfreiesleben10285 жыл бұрын
Brandon Lund Have been looking at a lot of the projects, really like the idea of buying something which might be broken and repair it to earn a bit to cover expenses for the equipment like new welder or so :)
@BrandonLund5 жыл бұрын
@@srenfreiesleben1028 I love repairing stuff. About 50% of my content is doing exactly that. There is a lot of satisfaction for me in fixing something that someone has discarded.
@folkerodriguez35795 жыл бұрын
Thanks for adding metrics.
@BrandonLund5 жыл бұрын
Anytime! I love the metric system. I wish we would change over.
@AntonioClaudioMichael5 жыл бұрын
Good welding tips and tricks and fabrication tips as well
@gsh3195 жыл бұрын
Its great I found your channel! Great info and great job. Very clean job. Ya did a great job walking through the build and the video work is excellent. Thank You and I subbed within the first 5. Thanks again.
@BrandonLund5 жыл бұрын
Thanks man! I appreciate your kind words and I appreciate the sub. We do a lot of different things on this channel so I hope you find it entertaining. Brandon
@snake_eyes_garage5 жыл бұрын
Great job and thanks for the walk through!
@BrandonLund5 жыл бұрын
I'm glad you enjoyed it. You can plan to see more like this :)
@bigtanksc5 жыл бұрын
Awesome
@BrandonLund5 жыл бұрын
Thank you Spencer Craft!
@paulveucasovic5397 Жыл бұрын
CAN I ASK WHAT DID U CHARGE TO BUILD IT COAST OF MATERALS AND LABOR PLEASE
@paulveucasovic5397 Жыл бұрын
I REALLY LOVE IT BUT HAVE NO IDEA HOW MUCH TO CHARGE FOR WELDING CUTTING GRINGING U KNOW TO BUILD IT SO IF U CAN SAY HOW MUCH DID U GET FOR THAT LIKE IF I WANTED ONE HOW MUCH
@BrandonLund Жыл бұрын
$900.00
@BrandonLund Жыл бұрын
$900.00
@kikikeyless Жыл бұрын
you explain well
@willyansartor5 жыл бұрын
Parabéns pelo trabalho. I am Brasilian.
@BrandonLund5 жыл бұрын
Thank you! I appreciate your support!
@drickard675 жыл бұрын
I'm kinda disappointed you didn't use your porta band angle guide you made,..
@BrandonLund5 жыл бұрын
I've actually given away both jigs so I dont have them anymore.
@drickard675 жыл бұрын
@@BrandonLund lol... Good on you.
@BrandonLund5 жыл бұрын
Hey guys. A fellow up and coming You Tuber at KTC Garage just gave our channel a shout out. Let's show him some love and check out his channel. kzbin.info/www/bejne/aXSpdoZqbbp0orc Be sure to congratulate him on reaching 1k subs.
@jackmiller36285 жыл бұрын
nice video.
@BrandonLund5 жыл бұрын
Thank you!
@hea58435 жыл бұрын
Thanks for all the great videos Brandon! A thought.... If you had left the wood not flush with the metal surface, the glass top would be chosen to be as thick as the surface metal, and IT would be flush with the metal on top.
@BrandonLund5 жыл бұрын
Good call! I might have to give that a shot in a future build! Thanks for the awesome tip!
@marty46454 жыл бұрын
Awesome build, beveling is really important. Have a blessed Thanksgiving; 1 Thessalonians 5:18.
@BrandonLund4 жыл бұрын
Thank you and God bless!
@ДенисКамчатка5155 жыл бұрын
Красота, всё по делу!
@BrandonLund5 жыл бұрын
Большое спасибо! Ура брат :)
@freedom86694 жыл бұрын
Nice.
@BrandonLund4 жыл бұрын
Thanks (and great name) 👍
@ChristopherSalisburySalz3 жыл бұрын
It makes me laugh that people think you look high! 😂 I've never thought you look high.
@BrandonLund3 жыл бұрын
@Christopher its that eye thing...people with eye injuries understand 😎
@paulakapablo17493 жыл бұрын
There is always that stoner out there that that "knows" everyone is stoned.
@bufunga3 жыл бұрын
Why didnt you just use the flux core or better question. When would you use solid core over flux and vice versa
@BrandonLund3 жыл бұрын
Solid wire produces no clean up but the coverage gas is susceptible to blowing away in windy conditions. Flux core requires clean up but because it doesn't require shielding gas its better suited for outside
@johnbaesv47765 жыл бұрын
nice vid LIKED
@BrandonLund5 жыл бұрын
Thanks John, I appreciate you watching
@gordon43855 жыл бұрын
OMG - we're welding again!!!!
@BrandonLund5 жыл бұрын
Hahahah I knew thats what the viewers wanted to see. The views plummeted as soon as I started that bike series but I had to get it done lol. I have a TON of upcoming welding projects to do so hopefully it will get everyone involved. I still have to finish the Honda TRX series also LOL .
@matthewhall55715 жыл бұрын
Brandon Lund part of what makes your channel great is the small quiet group of polite comments and you doing whatever you feel like doing or have handy for projects. So don't feel like you have to change it just for views if you don't want to.
@BrandonLund5 жыл бұрын
Thanks man! I try to give the viewers what they came to the channel for (most are here for welding) but when things come up I try to include everyone. I like variety now and then so hopefully others enjoy it too.
@matthewhall55715 жыл бұрын
Brandon Lund that's what makes it cool. It's like a real life blend of projects and not overproduced. It's got me halfway tempted to start up a channel someday.
@user-VIC...5 жыл бұрын
Класно.. так тримати.
@BrandonLund5 жыл бұрын
Спасибо, но это для клиента. Может быть, следующий я буду. Ура брат :)
@AntonioClaudioMichael5 жыл бұрын
Went and subbed to his channel
@theodorebowers97373 жыл бұрын
Yeah man that's a good topic do a video on safety in the shop things like that fire can electrical Grounding such as welder grinder generators in the shop welding of course let me a great video you could make all kinds of safety things in the shop check it out dude I don't look at it
@BrandonLund3 жыл бұрын
Thanks man I appreciate your suggestion!
@matthewhall55715 жыл бұрын
A couple of tool / gear suggestions that might help some of what you were doing in the video: 1. There are a lot of directions on the Internet for welding your own portable bandsaw table. It's way more convenient to make clean metal cuts that way. 2. This company makes safety rated sunglasses meeting ANSI and DoD specs for safety with interchangeable lenses. They're popular with military vets: wileyx.com/ I wear them all the time in the shop and whenever I'm outside doing projects to avoid injuries. They are really comfortable to wear and good visually so you don't remove them when you're working and risk any more eye damage.
@BrandonLund5 жыл бұрын
Funny you mention the portable bandsaw stand because I have been thinking about building one lately. I just really havent found a design that I'm really excited about yet. Those glasses look like the ticket! Thank you for posting the link. I have a habit of loosing glasses so hopefully if they are comfortable and on my head, I'm not leaving them laying around to get lost or broken lol
@hectorcalderon30115 жыл бұрын
@@BrandonLund check out swag off-road for a table for your saw
@BrandonLund5 жыл бұрын
@@hectorcalderon3011 they make nice stuff!
@hectorcalderon30115 жыл бұрын
@@BrandonLund they make nice stuff but with your welding skill you could probably get something machined and then finish up a table of your own
@matthewhall55715 жыл бұрын
Probably also worth wearing a mask during the sanding. Pallet wood and epoxy have gnarly chemicals in them.
@BrandonLund5 жыл бұрын
Excellent point! Thank you for bringing that up. You're right, I should have been wearing a mask. I usually do but i must of had a brain cramp or something. Cheers brother
@PkwyDrive13 Жыл бұрын
That rag sure looked like undies 😂
@BrandonLund Жыл бұрын
Hahahahaha you never know LOL.
@pjseiber27745 жыл бұрын
Glad you are back to welding. That's what got me here to start with. Great video really enjoyed it. You just about lost me but I did stay subscribed just didn't watch the other videos. Just wasn't interested.
@BrandonLund5 жыл бұрын
I appreciate your support and for sticking around. Most people are here for welding content and that's my main goal, but as my bio says, i have other interests too. I hope you do stay a subscriber but unfortunately I cant please everyone. Cheers brother
@jerryjordan45335 жыл бұрын
I love industrial furniture Don't care about what people say there going to say it anyway so unfortunate
@BrandonLund5 жыл бұрын
I do too Jerry. It just fits a lot of different types of home styles and decor. Plus it's something that will last a lifetime that you can pass down to the next generation. Cheers brother
@jerryjordan45335 жыл бұрын
@@BrandonLund Ive always worked with metal I think that I'll incorporate some wood.
@BrandonLund5 жыл бұрын
I just love the look of wood and metal combined. Especially if they can be distressed. It just gives a warm cozy vibe
@chrisallen3741 Жыл бұрын
Yeah, that’s terrible someone is saying that……shameful