Installing Long Tube Headers On My 370Z

[@MrBaker4811]

I know this was 3 years ago but this is the most outstanding how to video ever! So much detail on the description, and describing what tools are right for the job, you deserve more than you’re getting, keep it up!!!

[@adamroutley]

Your narrative is outstanding and you make what seems like a difficult task accomplish-able for regular Joe Bloggs like me.

[@omar-wf8zl]

NEXT VIDEO: Removing headers and sanding the inside to make them smooth.

[@milanmastracci]

LOL oh that would make me happy ahah

[@omar-wf8zl]

@@milanmastracci the title would make a good troll video

[@mannys9130]

11:38 I definitely recommend getting the special socket, but if you tore your car apart and can't get to the store you can use the double nut trick to remove and replace studs. Put one nut on the stud, and then put a second one on. Loosen the first while tightening the second to jam them together. Then loosen the stud with the bottom nut to remove it from the head, and tighten it back into the head with the top. Remove the nuts and you're done. :) Using the socket on the splined end is better though. You may also need to do the nut trick if the car's really fucking rusty and the E-torx or allen head of the stud is not usable anymore. :)

[@milanmastracci]

Yep! Had to do that when I was removing the rusted studs from my MINI's turbo. Good advice :)

[@HirschPower]

I just finished the installation of my PPE long tube headers on my 2012 370z Nismo, and this video was a huge help. I ran into an issue at the start of the installation when I realized that my engine block does not have pre-drilled stud locations for the studs that you are supposed to swap around, but I was still able to install my headers. I'll be making a video on the installation soon.

[@smokeynagata7657]

Just a heads up, Blox, OBX, CX racing, Megan racing are all pretty much glorified ebay brands. If you wanted to get something more high end I would have recommended the Z1 headers with your choice of test pipes/cat back combo or get yourself a set of Nismo 15+ headers as these were redesigned and don't really gain anything with an aftermarket header. Either of these two headers plus your pick of a test pipe/ cat back combo are your best bet IMO. Besides that, for anyone wondering, this is the hardest bolt-on to perform on the Z33/34 platform because of the limited space. I also recommend getting an UpRev tune to maximize gains as well as get rid of that annoying CEL from the cat malfunction code.

[@milanmastracci]

My header of choice would have been PPE headers, but those are MUCH more expensive. I want to see if I can get my hands on some, but in the mean time, I'm quite content with these headers.

[@daveochoa8110]

ISR are the best long tune headers.

[@flexican77]

@@daveochoa8110 isr lth...?

[@croaton07]

Fast Intentions make one of the best exhaust systems on the market for the 370z.

[@michaeldeleon5960]

So your telling me my 2015 nismo has good headers already?

[@yolsclassics6347]

Types " long tube headers for G37 in search " My wallet - " oh dear ... "

[@tmmurphy]

I did the same for cams and headers for a 350Z years ago. I was used to old Ford Foxbody prices ($189 for headers) and the $1500 price tag shocked the system. But in the era of OBDII that is the cost to play.

[@christophernestor]

Hope you used a new steering shaft pinch bolt. Those are one time use.

[@linuslindstrom663]

ye like everyone does that xD

[@Cheeseypoofs85]

so are oil drain plug washers... nobody replaces them. lol

[@Zaymusic370z]

Have a bad exhaust leak in my manifold I think, was trying to figure out how to access it thanks!

[@mohamadkhan9899]

Should’ve gotten PPE’s they come ceramic and doesn’t require to switch over the studs

[@Cheeseypoofs85]

and they are top notch quality.. OBX is entry level stuff

[@v36juanx71]

Mohamad Khan ig u have money to spend huh lol i would pay for headers that cost about 10% if what the car cost

[@mohamadkhan9899]

V36juanx Yt it’s 1500 bucks for the PPE’s. Not much different from FI. Plus can’t expect them to be cheap, get what you paid for 🤷🏽‍♂️.

[@caspernotsofriendly1803]

Same with ISR long tubes dont come ceramic coated but the studs match priced at 600.0. I love mine but getting extensions for upstream 02s is a bitch during these times of coronavirus.

[@taylormorales2795]

Do you have ISR? On a Z?

[@PhilipSamuelson]

Looking forward to doing my G35x next year. I opted for ceramic headers with Berk HFCs personally, can't wait to see how much harder the passenger side is with the AWD :P It'll be a blast either way.

[@jeromes5141]

Love the video. I have a g37s sedan and was wondering how the inspection and check engine ligh situation works out for you.

[@PortfolioAutomotive]

Well done on this video sir... very comprehensive and well organized!

[@Cheeseypoofs85]

great video my dude... a lot of people dont realize how much of a pain VHR headers are to put on.... on a side note, anyone who uses z1 shorty headers, you will need DE flanged cats/test pipes to bolt up to the z1 headers

[@neatpete7586]

Zero to jail -Milan Mastracci 2019

[@NapFloridian]

He will smile his way out of Jail in....3. 2. 1....

[@jnunez9771]

Any sound clips ? To compare to

[@HirschPower]

From what I've read, you shouldn't heat wrap any product if it has been ceramic coated. Over time after heating and cooling it will begin to warp.

[@Hellgato2016]

I ordered (type 1) o2 extenders… just to let everyone know, I believe the nismos have type 2 cause thats what my Nismo has… Put that in ur description so people know that they are different from yours to a nismo, thanks!

[@milanmastracci]

Nisformance says to check before ordering, for that exact reason. It is different from year to year, trim to trim, and where the vehicle was to be sold.

[@Hellgato2016]

Actually it worked out well, I cut my wire ends, swapped the ends and they turned out great, 😂🤣I forgot I’m great with wiring… I’ve done two motorcycles with extra wires through ape bars with heat sleeves on my wires, I’ve done the same with these just no soldering. The results turned out Great!!! Love your video man, it really helped tremendously! 🔥🤘🏼 plus the OBX Headers I received has plenty of room for my steering shaft to turn and I never had to swap studs over for the manifold… its a str8 direct fit!!!😄🔥🙌🏼

[@adautovlog8738]

I love your videos! You explain everything very well, even if I do not have the same car, but the auto mechanic fascinates me! Keep it up, greetings from Argentina!

[@milanmastracci]

Thanks Alejandro!! I appreciate it :)

[@az_3kgt714]

This job is quite a lot easier than doing it on a 3000gt. You have to disconnect the engine and lift it up, remove cv axles, and have to work between the engine firewall to get to the bolts, on a much older car..so more rust as well.

[@mannys9130]

6:45 Do you know about the box end wrench trick to add leverage? With a socket wrench though, a metal pipe works better. I have a 1-2ft metal pipe that I keep for situations like that. :/ I finally got it wayyyyyy back when a breaker bar wasn't enough to remove a friend's lug nuts. If you don't have a pipe, you can put the closed end of a box end wrench over the handle of the socket wrench to give yourself more leverage. It's awkward because it isn't perfectly straight, but it does help in a pinch. You can do it with another box end wrench by putting the closed end of your second wrench into the open end of the wrench that's on the bolt. Maybe this comment will help someone else.

[@milanmastracci]

Given there were wires and other sensitive parts in that area, I didn't want to put too much leverage, but yes that trick has helped me throughout the years.

[@mhmd1230]

i have a g37 sedan with k&n intake and obx long tube tuned by ecutek And it has an amazing sound

[@milanmastracci]

That's awesome!! Gonna throw my intakes on soon

[@OGYELLOW]

How was the install on the sedan? What version obx headers? V1 or V2? Lastly how are they holding up?

[@SheldonWyngard]

Great video mate. I am about to get some headers for my 2014 Q50 and I was looking at the drivers side install and just thinking what a nightmare it's going to be. Thanks for all the pointers. Will let you know how it turns out. Need to get them first lol. Cheers!

[@duhduhlovo1670]

Obx always making things harder than they need to be

[@Cheeseypoofs85]

well they are a pretty cheap brand so......

[@pawel3100]

You should convert the Z to Flex Fuel and run E85

[@ambernikonowicz875]

Pawel Nikonowicz he should do it! Would be awesome!

[@PR1NCETD0T]

I don’t think there’s many or any E85 stations in ontario or canada; would be a waste unless he goes to the track every weekend.

[@Cheeseypoofs85]

lol.. hes still on stock air boxes... E85 is for after you are FBO

[@Nismokh2]

Sorry to say you got the wrong longtubes bud... The sound your after is an Equal length longtube or a Equal length Shorty on this car such as PPE & Z1 but OBX does make a more affordable V2 LTH.

[@BlownC52000]

Hate how Canadians say out.. lol great videos though

[@CHESTRbeast]

breh, you almost went 120 km/h in second gear lmao, my golf only goes up to like 90 in second

[@MFullaStyle]

Were talking about 2 different tiers of cars lmao ..the 370z is in a class of it own ..

[@Texas_Road_Warrior]

MFullaStyle there’s golfs running 10s with bolt ons though 😂

[@straightupgutta]

@@Texas_Road_Warrior with upgraded turbos...

[@n55Rob]

You should def tune rn like rn or put all your parts on now and tune

[@wirekat]

Great install. Nice to see an honest install. Great narrative.

[@milanmastracci]

Glad you liked it!

[@ut1004bp]

I seemed to lost track, you said at the start your dyno results are with the cat-back exhaust pipes only. I thought you removed your cats and installed test pipes. Now with this complete exhaust mod, you will likely be running too lean, this will damage the top end of your engine. I'm impressed your jump on this project after fighting with the cats

[@HondaAholic]

I read you're not supposed to ceramic coat and wrap, it's one or the other. I also heard putting a wrap can ruin headers by making hot spots and not letting them dissipate heat causing dents and cracks over time

[@nismo_nicole7608]

I just picked up a set of PPE headers and am going to tackle the project tomorrow. The detailed list of tools etc. in the description is wicked helpful for less experienced folks like myself... thank you for including that! Also curious how different my 370z nismo will be to do this install... I plan on using this video as a step-by-step guide for the process from start to finish.

[@Vq_Kev]

how did that install go ? I picked up a set and im curious how hard the install gonna be

[@saulsegura7384]

Yes how did it go? Doing my research as well.

[@blaze-glz2126]

Are you still installing the headers 😂

[@ScaryBun_E]

we need a part 2 to this comment

[@alaa2084]

Awesome detailed Video Milan.. 2 years or so on Have you experienced any manifold leaks or change in power/sound etc? I'm really thinking about doing this exact upgrade OBX but hesitant with which brand or header type I should go for..

[@milanmastracci]

So I did have an issue with the OBX headers that I experienced after using it... one of the driver side runners comes in contact with the steering column while the engine is under load. It pretty much holds it in place and is quite concerning. They can be modified to clear, you can run solid engine mounts so the engine doesn't move, or you can run something different like PPE.

[@roninmantis7584]

Great video, well-spoken. Love the notes. Look forward to seeing the hp gains.

[@Jin_Jon]

This is the best install video I've seen. Awesome job, keep it up

[@milanmastracci]

Glad you liked it! Thanks Jonathan

[@kl3ag1]

Love your content. If i might make a suggestion, you should use a slower lens (or slower f stop number like f4 if well lit) for some shots so everything is in focus. anyway, still great content

[@TheCinderellaman10]

The trumpet noise is good lol,exhaust is meant to sound like an instrument, otherwise more rasp, just sounds high pitched racket, plus more drone, but surprisingly it sounds nice, does the longtube headers get rid of both catalytic converters or not?

[@milanmastracci]

These headers do indeed replace the manifold and catalytic converter. You can run some cats in a custom Y pipe should you want to run these headers.

[@revvolutions]

Moar trumpet Moar good

[@Pvtjoker122]

Excellent video! I will definitely be using this for reference if I get long tubes for my Z.

[@00j80]

very well and high made videos this is TV quality much like a SPEED VISION episode. great and informative to watch.

[@Cheeseypoofs85]

on a side note, looks like your rotors need replaced.. that drivers side one has some deep grooves going the wrong way

[@thewolf7119]

Great install video...but I would spend the extra money to get better made headers. Those welds don't look very good, doesn't look like they back purged them during the welding process. They could fail at anytime.

[@Trainwreckz34]

did you use your oem gaskets or the obx, wondering what would be best for the engine side gaskets

[@stephenswindle3839]

When you had the O2 sensors out it would have been a good idea to use some O2 sensor cleaner and clean the carbon off of the sensor just saying.😁😉👍

[@excaliburrebel7881]

Drivers side sucks. Can confirm. Last bolt on the heat shield will not budge

[@ndk2k4]

I've seen people soak the exhaust wrap in water before wrapping it. Is that a thing? Going to be sick when you tune it. Removed pretty much the biggest restriction. Headers, cats, biggest difference maker when you swap those out. Sick vid.

[@milanmastracci]

I let mine sit in water for 30 seconds prior to the install to make the installation a bit easier. I'm really pumped to put the intake parts on along with the tune. Should make quite the difference 😁

[@brendenmills8856]

i heard on the driver side its best to remove your inner fender liner and you can access the bolts through the wheel well once removed

[@drsmooooovedre7819]

Great video Mil! Are you in Canada bro?

[@milanmastracci]

Thanks brother! I am, southern Ontario 👍

[@ryanscanlan9875]

Fantastic video mate. Really well filmed and the tuition is nice and clear. Def subbed as Now I want to do this to my HR. I'm doing the rear subframe bushings tomorrow, do you think the headers are a harder or easier job?

[@milanmastracci]

It's hard to say. Some cars, the bolts come out nicely. Others are stupid! If you've installed test pipes on your car recently, you shouldn't have any problems doing headers. It's just a tight space.

[@Sergiosniper100]

Once again Great Video!!! Your videos never disappoint

[@TravisG001]

How is the quality on the headers? Is it holding up?

[@bOOSTEDjOSH]

Rather invest in turbo kit then long tubes

[@KevConc]

What camera & lense do you use? Such high quality!

[@georgeacosta4562]

What type did you get? I went on the website and according to my o2 sensor I need type 2 but they’re not available yet. I figured all Zs would be the same type. I have a 2010 nismo

[@midrangetorque]

Wow. Nice video. What a pain!!

[@ronjarretts]

Outstanding video, I got a 13 nismo getting ready to tackle this project. I have more confidence now:) Awesome job including links for tools. I have an Amazon wish list a mile long now lol.

[@milanmastracci]

Happy to help brother! Good luck

[@caspernotsofriendly1803]

Z1 Motorsports has those extensions for 02 sensor for a lot cheaper.

[@trash2treazures]

Have you done a before and after dyno run yet?

[@Jake-im2lv]

The long tubes transform the sound, but they are way too expensive to get shipped to Australia and most of them don't fit RHD cars :(

[@caspernotsofriendly1803]

Also install a throttle body spacer nice thick one huge difference and whistles loud after 4.5 rpm and heres a trick to get the paddle to react faster buy a paddle commander. Way more power at 1st setting 2nd and 3rd settings are drag race only you cant drive under that on. Try it out

[@sal8361]

This guy must be Canadian

[@rashaadhoosain9780]

Bro, I honestly need to thank you, I've been planning to get myself a z34 for a while now and have been keen to know if I would be able to do all the work myself and everytime I think of something I wanna install I wonder what the install process is gonna be like so I hope over to KZbin and since watching your vids I'm quite confident for the project. Big ups

[@dalfoozapp8621]

Yo what type connection did you choose when you bought the extension for the o2

[@milanmastracci]

Type 1

[@dalfoozapp8621]

Sick thanks bro! does the year of the car matter like would the connection type be different, mines a 2011.

[@tonytolson656]

Where did you order the 02 sensor extensions ?

[@ThatguyWitjokes]

Excellent walkthrough. You know if these exact steps work on an 11’ G37S Sedan? I know it’s essentially the same vehicle but just confirming

[@milanmastracci]

From what I've seen, it is the same process across all of the VQ37VHR engines

[@justinc8157]

Nice videos bro. How do you get the car inspected without the cats? Do you just got a buddy who passes it?

[@Gabriel83580]

Nice!...they look good. Did you remove your cat's now that you have long headers? Or do you have the further back?

[@nukexD]

Nice install Milan! Those headers and demon bolts are tough haha

[@milanmastracci]

Yes they are!! Thankfully I removed them when I put my test pipes in lol

[@imJGott]

16:30 im helping a friend on his 350z and from the looks of it. everything that is on the driver side, in terms of water lines, is on the passenger side of his 350z. all in all, the engine design and placement of parts truly sucks in those cars. i know by designed those components arent meant to be uninstalled once installed but damn this car is not upgrade friendly for being a sports car.

[@mj350gt2]

Nice breakdown on the bolt on LT headers install! Really informative dude. VQ mods are endless and addicting. I love my 08 G35sport FBO 6speed. Q: where can I get a dope front bumper lip for my G? Any advice, there very few out there.

[@vq35hr3]

Which Y pipe is that? It had the cats integrated into them ? Or was it custom

[@gilbertmonge4076]

I would like to know that answer too

[@SubwooferVideosx]

WOuldnt it make sense to upgrade everything at once. Air intake, ported manifolds, long tube headers, exhaust. All at once is what im doing and its gonna seem so much easier.

[@milanmastracci]

In theory, yes.

[@370zadventures8]

milanmastracci A lot of your videos decided on what I got for my Z so I thank you for that and the response to my question

[@DominckPadilla]

Do you know if the o2 extensions were type 3 or type 4? Love the videos provided so much help especially with the intake manifolds!

[@milanmastracci]

Hey Dom! The ones I bought were type 1 from Nisformance. I have a link in the description of the video. I'm happy to help 👊

[@taylormorales2795]

Did you finish this all in the same day?

[@milanmastracci]

Yes, but it was a long one lol

[@cruzn310]

will those extensions fit any longtube headers ?

[@JDogThrash]

I’m about to order my long tube headers & wanted to clarify the right type of O2 sensor extender I would need for the secondary sensor in the defouler area

[@td5133]

No emissions in Canada I guess, must be nice.

[@tomaslopez4322]

Great set up my man, keep them videos coming. One question tho, are you planing on installing cold air intakes or are you keeping the stock boxes with the drop in filters?

[@aaronramirez9147]

The o2 sensors will be pointless once the tune is put in. It totally cancels out any emissions code

[@thevalleywindshieldsllc]

I have a 2015 Nissan 370z and I will be using the ISR longtube headers but in unsure if I need the same NISformance O2 Sensor Extenders (Type 1) or another type. Can you help me with this?

[@milanmastracci]

Check the description box. The type you need is in there

[@carlosruiz3679]

If I get long tube headers for my 370z would u recommend I scuff it n add the ceramic coat and wrap it with the exhaust wrap?

[@nasmedia3869]

Excellent video as usual. However, I am ordering my Z1 short headers, is the installation similar to this? Or what?

[@milanmastracci]

Very similar, however the Z1 header only replaces the manifold, where my long tubes replace the headers and catalytic converters.

[@nasmedia3869]

@@milanmastracci thank you bro. Appreciated

[@SHELBYGT645]

props to you for staying NA you should get some long tube intakes and a tune and you will be easily 350 whp

[@Qlassicrepresent]

[BB] Pikachu lol calm down your easily 350whp I have more than this on mine and I’m at 344

[@SHELBYGT645]

@@Qlassicrepresent calm down? everyones calm buddy. your 344 isnt shit to begin with. sit down and be humble. your cars not that fast.

[@Qlassicrepresent]

[BB] Pikachu I don’t know why you say that. I didn’t say my car was super fast. I simply said, 350whp for an exhaust and intake change + tunes doesn’t add up. Don’t get me wrong I wasn’t insulting you !

[@Redline2695]

Qlassicrepresent there are people making over 350whp with exhaust, headers, CAI & tune...

[@HondaAholic]

​@Qlassicrepresent admintuning said ISR longtube headers, ISR Y Pipe, ISR Single exit exhaust, and long tube intakes can get you close or at 350whp. I'm putting on my ISR LTH now, ill report back when I retune in a few weeks.

[@jeryrayag1]

Nice video on how to “But no sound clips before and after”???

[@gopherchucksgamingnstuff2263]

Brother, I ported polished the intake and both supercharger horns and installed a sprintex twin screw on 2003 mini cooper s, My 370 is a picnic to work on. Cool vid man this helps a lot. I have a 2010 and I have replaced all the sensors and most of the chassis grounds, now I can do the upgrades. I have the same stillin intake, headers and pipes are next.

[@marufawal]

@milanmastracci Hey great vid love your channel. After following your channel for a bit I have some questions I wanted to run by you. 1. Do you get any drone on the highway or any unusual rasp? 2. After installing the OBX headers do you feel the noise level is ok for the a daily driver? Or is that not a concern for you since this is you're project car 3. I think this one is for all of us when I say, dyno sheet please!!! thanks !

[@ALANKENTT]

tengo long header obx y catback magnaflow y si es algo ruidoso pero es soportable y aparte amaras el sonido, aparte no conozco un Z que no haga un ruido .... comentarios referente al sistema de escape, se escucha algo agudo y aparte el sonido raspa cuando sueltas el acelerador en altas revoluciones pero aun asi el ruido es hermoso y terminarás amando ^^

[@fernandohood5542]

Where is the dyno?

[@alonsocastellon9065]

Admin, or Saul ?

[@ramosramos3716]

I finish mine, got the service light on, said that is a misfire cylinder 5, did you get the same code when you put your headers on?

[@OGYELLOW]

Of the six nuts on driver side header which were the hardest to get to/remove?

[@magnusandersen8898]

Very nice and in-depth video!

[@milanmastracci]

Thanks Magnus!!

[@HeyThereItsMinecraft]

16:32 Thank me later Awesome videos

[@JavTheRipper]

😂😂😂😂 I was not expecting that

[@Sak-zo1ui]

Bruh

[@Sak-zo1ui]

Ded

[@caspernotsofriendly1803]

I've got to tell you the 2nd try at doing my 350z longtube I didnt remove anything but the intake that's it lol. It sucked

[@MemosGarageAZ]

Very nice and detailed vid, good job man, nice Z 👍

[@philipholman1713]

Wow what a pain in the ass, I gotta give you props on this install it looked pretty intimidating. You never gave us new hp & tq numbers. Was it worth it?

[@milanmastracci]

I would 100% say it is worth it! I am getting it tuned and dyno'd to see what kind of figures these power mods make

[@terrydoane5637]

Where did you get the oxygen sensor extensions at?

[@invasivecoyote1361]

That ceramic coat does nothing! Burns off after an hour

[@caspernotsofriendly1803]

Hay bro where did you find 02 upstream extensions? I have a 2006 DE and I cant find nothing everyone keeps sending me flops costing my cars performance to crap running lean way lean. Let me know if you got some connections to fixing my problem.

[@dropful2347]

Any checking engine light with the test pipes and manifold ? Did you add a anti fouler to pass emission on the test pipes ? Please reply planning to do this to my Nismo 370z 2018

[@John-co2yz]

Hello Milan, how much wrap did you use per header? thanks in advance!