Miller Spectrum 875 Autoline wired up to the Langmuir Crossfire Pro

[@iraqirestoration2991]

Thanks for the video man i just bought the 875 today and I saw your video now I want that cnc table in my shop lol very cool to see the capabilities of this machine

[@marcustomz]

@iraqirestoration2991 Thanks for watching!

[@juancarlosmendezlaguado3828]

Greetings, this video clarified many doubts, I have 875 and I made my own table

[@marcustomz]

Thanks for watching. You made your own cnc table? That's impressive!

[@juancarlosmendezlaguado3828]

Yes

[@andycornell201]

Delayed congrats! Such an empowering tool to have.

[@madpullingpics5966]

Thanks for sharing. I have the 875autoline and I’m considering buying that table. This definitely helps!!

[@johndunn9819]

Nice 👍🙂 shop

[@SWALLDOG]

Congrats man! That set up is awesome! Thanks for the info for the Miller 875! There is not a lot of information for hooking those up to a cnc table. I’m in the middle of trying it right now. Glad I found your vid!

[@marcustomz]

SWALLDOG I'm happy to hear this video helped you. Congrats on your set up and thanks for watching Marcustomz Garage ✌🏾

[@mickkoldy1323]

Love see more of the Langmuir unit Appreciate your work!

[@marcustomz]

You got it 👍🏾, Thanks for watching Marcustomz Garage Mick Koldy.

[@GardnersGarage]

Nice man! I ordered my crossfire pro on Nov 16. Can’t wait! Good video. Thanks!

[@marcustomz]

Gardners Garage Congratulations on the new table. Thanks for watching 🤜🏾

[@JohnShannonSD]

Looks great. Keep it up! Your videos are getting better and better too. Inspiring work and you have a great sense of humor.

[@marcustomz]

Thank you John Shannon, Have a happy 2022🧑🏾‍🏭

[@tac328]

i love the excitement in this vid. gj bro.

[@marcustomz]

Thanks tac328 , appreciate you stopping by my channel 🤙🏾

[@tac328]

@@marcustomz positive vibes brother! i just ordered a crossfire pro, gonna have a similar setup.

[@marcustomz]

@@tac328 Thanks and Congratulations on your CNC table, your gonna love it, and so will everyone who knows you own one 😆

[@buckmaster7276]

Great video! I have the 875 autoline too and this is the very first video on wiring for cnc. I'm building my own plasma table, and want to use the Miller. Although I don't have the straight torch handle, I'll have to work some OT and save for it. Thanks again.

[@marcustomz]

Ryan Riendeau your building your own plasma table? that's Awesome !! You'll love the convenience of being able to switch between torches on the fly.

[@LonTierney]

Appreciate you sharing. I went with HTP, but love how small that machine torch is - will likely help with initial height sensing on thin metal.

[@marcustomz]

Lon Shea Thanks for watching Marcustomz Garage, HTP makes great plasma cutters.

[@MaedarOH]

Great video, you've got a nice set up there. I'm almost done putting mine together. I have a Victor Tech (Therman Dynamics) Cutmaster 58. I've used it as a mechanized cutter for years with a line burner and love it. I can't wait to try it on my table.

[@marcustomz]

Thanks MaedarOH , Heck yeah man! congrats on your new table. Thanks for watching Marcustomz Garage.

[@jeremyquantphoto]

great video! thank you so much for sharing!!!

[@marcustomz]

Jeremy Quant, no problem, thanks for watching Marcustomz Garage.

[@jeremyquantphoto]

trying to gather necessary parts of the 875 Autoline automation kit. with the crossfire pro, does your machine torch use the Shield Sense Tab? if so, what is it for? how does it install? thank you! can’t wait to see the press brake build!

[@marcustomz]

Hey Jeremy Quant! did you get the Animation kit for your Miller 875 Plasma Autoline ? Also which plasma table did you decide to go with? The Sheild sense tab is not needed to function this cutter.

[@jeremyquantphoto]

Thank you so much for the info!! Haven’t received my table yet, but it’ll be the 4x3 Pro.

[@kylearaiza8808]

Great vid I wished there was one for the 625. Enjoy

[@marcustomz]

Kyle Araiza thanks for watching Marcustomz Garage. ✌🏾

[@Iann128]

Thanks for sharing! I'm still waiting for my crossfire pro to ship (ordered 11/19/21). Hoping to get the Hypertherm XP45 when it gets here.

[@marcustomz]

Iann128 Congratulations on your new table, and thanks for watching Marcustomz Garage! ✌🏾

[@Mario456SS]

That’s sweet!

[@marcustomz]

jerico armstrong thanks for watching Marcustomz Garage. I had to re-upload this video.

[@carsonfancher5889]

Nice

[@DG_Fabrication]

Thanks for the video it was just what I was looking for. I have one question can you still use the plasma with the handheld torch?

[@marcustomz]

@DG_Fabrication Yes, I can switch between the machine torch on the plasma table and the handheld torch in seconds. Thanks for watching.

[@acolonnh1]

Where does the plug cloud go from the 870 to the plasma cutter? Can i see your wiring from the Miller machine Got ours all set up and not able to cut

[@keithlane4343]

Very impressive first cuts. I just found your channel today. What will the focus of your channel be ? Very clean and organized shop.

[@marcustomz]

Thank you Keith Lane, you asked a very great question. To be honest the focus of this channel will be my business journey into manufacturing products to sale to the public, and start my own business from just this three car garage into one day a large shop. I love the Automotive On-Road and Off-Road Community, I'm hoping to dive into these areas first.Thank you for your question.

[@keithlane4343]

Sounds like a good plan. I've got 40 years of prototyping, methodizing, CNC programming, design refining, production engineering experience. Always looking for cool new projects. Here's to a great 2022, and beyond.

[@MatthewParsons-cx4gj]

Didn't see you connect anything to that rear cannon plug you Installed in the video! Did you end up using it for the setup?

[@colby9656]

I am wondering the same thing. Have you had any need for the cannon plug?

[@luismejia2515]

Hey... great video.. where can I get my hands on one of them wire kit

[@marcustomz]

Thanks, I have another wire kit in my possession I might be willing to sell if your interested.

[@Zizoum-1]

Hello, how are you? Excuse me, I have a question exactly like this. Do you need an air flow regulator? Or not? The second point, what is the regulator in the video and where can you get it? Thank you.

[@marcustomz]

@Zizoum-1 you do not need an air flow regulator with the Miller Spectrum 875 Autoline. The Miller Spectrum 875 Autoline has an automatic feature that self regulates the air flow out put. The air flow regulator I show in this video, is there for when I need to adjust the air flow out put when I'm painting in my garage.

[@Zizoum-1]

@@marcustomz Thank you dear, one last question if you allow me! What is the diameter of the internal connection of the air hose inlet in the machine? Because the machine that I got from a friend does not have a nut connecting the machine to the air hose. Do you know its diameter or size? For example, 10 mm or more? Sorry to bother you

[@marcustomz]

@Zizoum-1 4 to 5 millimeters.

[@juancarlosmendezlaguado3828]

I have another question, do you have the connection that you made to your controller to activate the remote trigger of the plasma?

[@Subi_doo]

Hey bro, just letting you know, you don’t need to run an air water separator on the machine. The 875 comes with an internal one from the factory

[@marcustomz]

Wow! I had no clue, that's pretty Dope!! Thanks

[@Subi_doo]

@@marcustomz I was about to install one, but I installed the 12v harness first and noticed it already had one when I took the cover off. It’s tiny, but still supplied inside. The more I think about it, your probably better off running the external too to prevent water making it inside the machine. I don’t understand how the internal on works. Normally there’s a valve you open to drain, but I can’t see mill making you take the cover off everyone to drain it. It also has a black drain hose that goes right behind the black plastic cover

[@chincha805]

what micron filter are you using? awesome, i cant wait till i get one.

[@marcustomz]

LarryG805 the current set up is with a inline Motor Guard .01 Micron filter, aka the toilet paper 🧻 air filter. My next video we'll cover installing the Ingersoll Rand Refrigerated Air Dryer System in the Garage. Thanks for watching ✌🏾

[@josecontreras8099]

What type of air compressor you run it with??

[@juancarlosmendezlaguado3828]

I just want to ask you a question about how many HP? Do you recommend the compressor and how many liters is the compressor tank? Thanks in advance👍

[@marcustomz]

My Kobalt 60 gallon compressor is 3.7 running HP 11.5 SCFM @ 90 PSI 13.4 SCFM @ 40 PSI 155 max PSI The compressor does the job. It kicks on about ever 45 minutes. I'd like to add a piggyback tank one day.

[@juancarlosmendezlaguado3828]

Thank you very much for your information, I am planning to buy a 5 HP compressor

[@jassuryceballos505]

What’s if we have the 875 but not the auto line

[@marcustomz]

Hey Jessury Ceballos the non Autoline kit has a similar but different wiring configuration. I would call Miller and talk with the Tech support they are very helpful. The manual for the non 875 should help some as well. I'll go look at my manual to see if mentions the non 875, I'll get back to you.

[@CraigGuggenberger]

Help! I am pulling my hair our trying to get this same setup working! The torch will only fire when i hit the torch off button not the torch fire button! Miller tells me that the 875 Autoline with machine torch uses a momentary switch to fire the torch and the Langmuir uses a closed circuit torch fire. Did you run into any of these issues when setting yours up?

[@marcustomz]

I did not run into this issue. Do you have the torch height controller from Langmuir?

[@marcustomz]

Do you have the Automation kit?

[@CraigGuggenberger]

@@marcustomz I do yes, I am so confused! Did you run raw voltage out of the Miller or divided?

[@CraigGuggenberger]

@@marcustomz yes from Miller

[@marcustomz]

Hey Buddy, try this. The "Torch height controller cable" coming from your Langmuir System Control ecu box. Move that cable to the "PV Output" on the Langmuir Torch height controller unit. Tell me if that solves your problem.

[@MattParsons-b9y]

Hey bud, how's your THC working? I've NEVER been able to get mine working properly. What voltage do you have yours set to? I've got a THC Proma SD

[@marcustomz]

@MattParsons-b9y no issues with the THC from Langmui. I'm not familiar with the thc Proma SD.

[@geostan86jack11]

#⃣1⃣