MK5 GTI Ramair Induction Kit Install on 2.0 TFSI AXX Engine.

The filter in the video is out of stock, but you can find similar ones on their website.
Also don't mind the trunk open warning light, it's an old problem I have to fix, not related to this change. And don't underestimate the difficulty of doing this on your own, it's not easy at all, even if in videos we seem to get that feeling. I recommend having a buddy near you to help you.
Any questions or suggestions? Let me know in a comment below

[@HacksyMuchoMas]

AXX me uno Bro nice!👍

[@noseyparker6622]

Hi.....a couple of things....did you not get a heat shield plate that you put at the back of the engine where the mass air sensor is? You have to fix it to the engine cover points. And also did you know you can break off the oil filler neck extension tube so its then nice and flush with the rocker box cover.....its only glued on and can be twisted off with large grips or stilsons.

[@ClaudiuB]

Hi Dave, thanks for the advice. I didn’t get the heatshield, I know what are you reffering to, I’d like to have it too, but it was not included in the package. About the filler neck I know I coud take it of so the cap will look nicer, but I didn’t knew is so easy to get it out, I thought there’s something else I should buy to do that. I’ll remove it at some point. Cheers

[@rizwanmeah7492]

Very good video. Thank you friend.

[@ClaudiuB]

Glad that you liked it ;)

[@igorwheeler]

Salut, ești pe stock sau pe vreun stage? Nu ai pierderi de putere la joase? Consum mai mare? Citisem pe forumuri că sunt unele devieri din cauza formei tubului din zona MAF senzorului. Cel stock e oval, iar ăsta vine cilindric

[@ClaudiuB]

Salutare, stock. doar induction kit-ul l-am schimbat. i-am dat drumul si n-am avut erori, nici pierderi, dar nici castig. Mai mult am schimbat pt capacul ala ca arata ca dracu si acum pot si sa vad motorul si sa mai umblu pe acolo cand am probleme...

[@Benko_DieseL]

What are the differences after fitting the pcv delete?

[@ClaudiuB]

Don’t do that! Better oil catch can or replace PCV

[@Benko_DieseL]

@@ClaudiuB Why?

[@THEG12EG]

I think the same intake as you the carbon one, I was thinking of swapping to ram air how does it compare

[@ClaudiuB]

My "carbon" plastic filter was shit, breaking down from shocks already, and also the factory intake was not well designed in my opinion. After mounting the aftermarket intake filter from RamAir I can say the car feels a bit different, especially the intake temperature, is much lower than before with the stock intake. And the benefit is that if the filter is too big, you can always buy another smaller one and fit it there, so you have more access around it.

[@THEG12EG]

Claudiu B. Did you go for the oversized or normal?

[@ClaudiuB]

THEG12EG normal. The oversized just looks better/bigger. I don’t think the difference in power will be so big. Maybe just the difference in wallet

[@THEG12EG]

Claudiu B. Yea I think your right.. I’ll get the normal one