MN99s 370 motor upgrade

MN99s upgrade from 260 motor to 370 motor
Speed and crawling power are literally improved.
Will have another video for rock crawling and bashing at green field, stay tuned.
Get this truck?
MN99s stock
------------------------------
s.click.aliexp...
shope.ee/4KgwC...
www.asiarcdepo...
shp.ee/ysj8cmv
s.click.aliexp...
MN Metal 370 Gearbox
------------------------------
s.click.aliexp...
shope.ee/6pOHB...
shp.ee/rqayujv
s.click.aliexp...
------------------------------
Happier by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3y18qwC
Music promoted by Audio Library • Happier - LiQWYD (No C...
------------------------------

[@cjb405]

Done this on mine, other musts are oil shocks and mounting the servo on the front axle with a kit which removes all steering bump and angle!

[@ACeperienceRC]

👍👍 true, i think i might do that too, else it's a flip over king🤣🤣, thanks for watching 😊

[@Mauricio_EPM]

Nice simple and good video. 🎉

[@jesseshelden6420]

Thanks for the video!

[@ACeperienceRC]

You're most welcome! Thanks for watching 😄

[@BangForYourBuckRc]

Very cool sir. I’ve been thinking about doing this to my sons MN99S. I’ve killed 2 esc’s in it so far! Going to try a budget 30amp and maybe a 370 size motor next. Haven’t had much luck with it yet, as it was very week out of the box and burnt out after the third use. Glad to see you had better luck with yours!🤙🏽 Thank you for Sharing my friend!💯❤️✌🏻

[@ACeperienceRC]

Wow.. nvm, your son will definitely appreciate your effort in it bro. thanks for watching my video, really appreciated. 😀

[@joshuasalisbury789]

Get a 40a kyrc cheap and reliable unlike the 30a

[@Vien1275]

​@@ACeperienceRCHey I have a question. Which side of the motor is positive and which side is negative?

[@tahaimelati6310]

I found out that your channel are absolutely interesting,keep it up mate

[@ACeperienceRC]

Thanks, will do! thanks for watching.

[@islandrc-duke1972]

Nice upgrade and install

[@ACeperienceRC]

Thanks for watching bro 😀

[@lisminircstudio974]

more upgrade to do very soon~

[@ACeperienceRC]

yeah, i got you. it's due to all the gears are still stock in plastic. 😀 im playing with care now, control the throttle gently.. hahaha, thanks for watching bro.

[@lisminircstudio974]

@@ACeperienceRC (๑´ㅂ`๑)

[@MrRGM10]

Ok for mn d90? All stock ok?

[@oioindoor8155]

Amazing video bro really like that ☺️👍👍 Subbed ❤️❤️

[@ACeperienceRC]

Thanks for watching and your support 😄.

[@carloshnunez]

Very good upgrade 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

[@ACeperienceRC]

Thanks for watching bro 😀

[@mobilbatman9224]

Motor the best 👍 thanks for sharing 😁 like video my friend

[@ACeperienceRC]

Thanks for watching! Glad you like it mate!

[@user-cm6gg9ev7i]

Do is your car working properly without any board issue

[@raisjunaide]

Thanks bro 👍

[@ACeperienceRC]

Any time for it, and thanks for watching 👍

[@FarajFazeel]

hi bro is your d99s is working properly because my one's reciever board is not working is there any problem in between motor and reciever board

[@sd_gundam]

I just ordered to replace the motor of my wpl c24 2 speed gear with your black motor. And I use 30a Esc. But I saw that high speed 370 black motor burns 30a esc. Is your esc still ok?

[@bubblesrcshed]

Seems more powerful now time for a trail run brother 👍

[@ACeperienceRC]

I think so too, yeah will do that bro.

[@bubblesrcshed]

@@ACeperienceRC I have to order this motor now and hope it cures my power itch or I’m gutting it for a new ESC Motor and Servo

[@scaleworksRC]

I just got the DEERC version of this and it can't even push it's own weight up a hill. I get to a tough spot on my course and the battery cuts out and the lights start flashing like it's too much current or something. Did I get a lemon or is the stock setup really that weak?

[@OffroadRC_YT]

Same here, may I ask what colour your esc is? I have an older version of the MN99S and i’m not sure if a newer version has a stronger esc

[@scaleworksRC]

@@OffroadRC_YT It's the tan board labeled 2022 so I think it's the new one. I took it out after putting a bigger motor and lower gearing and the ESC burned up after about 10mins of running. I have some spare parts laying around to make it run again though. Just need to put the time in.

[@IslandTherapyPH]

Hey bro i wanted to ask if it was safe to upgrade my fully stock mn 99s with a 370 motor and have no issues?

[@aviadblank498]

Very nice!! Which gear box is better? The metal one or the stock?

[@ACeperienceRC]

Metal one is better bcos more durable 😊

[@cloakz3010]

Is it waterproof? And do you have to solder?? Also can I have a link for the cables you used??? I subbed :)

[@ACeperienceRC]

Thanks for the sub bro, this car is not waterproof. Yes, need to solder it, you can refer to the following link for the motor wire soldering, I’m using the same cable too, Thanks for watching bro 😊 kzbin.info/www/bejne/jpzTeKaDpax6p7M

[@cloakz3010]

@@ACeperienceRC Sorry I meant if the Engine was waterproof.Thanks though

[@JK-RC-FOCUS]

Sooooo cool upgrade 😍😍

[@ACeperienceRC]

Thanks for watching bro 😀

[@georgepapamichail1006]

Great video. So it is better to use a 370 motor instead of a260 as an upgrade ?

[@ACeperienceRC]

370 more powerful compared to a 260. it increase the torque in climbing and run faster :)

[@georgepapamichail1006]

@@ACeperienceRC but does it need any special modifications in order to be installed ? Could you please send me the vendor that you got it from ?

[@rarest_dude]

How did you guys takeoff the pinion gear of the stock motor? I tried so hard that I messed up the old motor and still wasn’t able to get it off:\

[@ACeperienceRC]

Need a sharp head pliers, hammer and small wall nail, then place them in between of 2 tables. Then HAMMER It😂

[@rarest_dude]

@@ACeperienceRC hahahahahahha, thanks! I will give it a go!

[@YKRCCLUB]

귀여운 차량 잘보고 갑니다.. 구독하고 가요

[@ACeperienceRC]

도와 주셔서 감사합니다!! 😁

[@corireff4361]

What size tooth was the transmission by chance? Or possibly the size of axle the motor has??? Please would help greatly in my choice of upgrades

[@Wurstkommission]

Cool!

[@ACeperienceRC]

Thanks for watching bro 😀

[@myleslevi5441]

Can you throw that motor in a 2speed gear box ?

[@ACeperienceRC]

Yes, as long as the two gears gearbox is fit the 370 motor.

[@OffroadRC_YT]

Hi there, which motor did you buy? the aliexpress link has 2 options. the D12 motor or the 2 speed motor

[@ACeperienceRC]

Hi there, I bought the D12 one, but if you have plan for 2-gear gearbox then you should probably go for the 2-speed motor instead :)

[@JoseGarcia-yk3dl]

What is the size if the original engine? 260?thanks

[@riyanzulfa8094]

Sis, I want to ask, I'm upgrading my 370 motor, how come if the road starts to die, the mn98 cars are all original. what is the solution

[@ACeperienceRC]

I’m not sure the dying is due to the main board burned or any other issue. So far my upgraded mn still working 😊. Is its wire loose when you cover it back and caused the short-circuited? Btw I’m bro 😂

[@kevnug1095]

can this be applied to mn78? and share the link for the 370 motor

[@ACeperienceRC]

yup, shared in the video description. :) thanks for watching bro.

[@loga_912]

Do you face any probs by changing 370 motor ?

[@ACeperienceRC]

So far nope for my unit, however I hv recently upgraded to brushless, will test crawling later I foresee it might hv problem 🤭 kzbin.info/www/bejne/m5vPamB5hbFom7M

[@muhammadadamrizkys.s.3697]

i just upgrade my MN99s with 370 motr + metal gearbox but why the speed is so slow, i see your video dont upgrade any electronic parts like ESC, but why my RC is so slow

[@daijoubu4529]

370 motors is just the size, its available in low RPM/more torque and low current draw or high RPM/less torque and require more amps (ESC upgrade may be required)

[@michalstanik9884]

Please what esc to use for this motor. Thank you

[@ACeperienceRC]

In this video, I’m using the original board, it’s working fine with it. Thanks for watching bro.😄

[@mautuber]

Are you using standard 2.4g esc for 370 motor?

[@ACeperienceRC]

Yes bro, so far no issue

[@mautuber]

@@ACeperienceRC oh. But my standards esc become hot, and keep stopping

[@allaniman8829]

did you replace the electronics too?

[@ACeperienceRC]

In this video, nope, original receiver board, so far 370 no issue

[@ilyakhalyapin2774]

Would upgrading battery to higher amp will result in more power for the 370 motor?

[@ACeperienceRC]

Erm, this shouldn’t help much because there is a limiter in its factory esc. Perhaps 35c or 60c battery does no difference, but lower amp batteries installed may make your battery hot or esc damaged.

[@ryanisaac4252]

Which one did you buy? Is it the 2 speed motor?

[@ACeperienceRC]

It's a high turning black color 370 motor, solely the motor. I have the link in video description check it out from there😊. Thanks for watching it, Ryan.

[@AndreasStreek123]

Do you have a link where I can buy it? And do you have a different servo in it? And what battery do you have?

[@ACeperienceRC]

Yes, we posted the link in video description, feel free to check it out. thanks for watching :) the servo and the 2s battery are stock at the moment. :)

[@marek8591]

how long this engine can work? my brushed 390 died after 45 minutes

[@ACeperienceRC]

Errr.. mine still survived 😅. Yours board died or the motor?

[@TW39]

Can I use the 370 motor on a 110scale rc crawler chassis

[@evoemperor3776]

What motor rpm did you buy? I have a 370 motor for wpl d12 but it doesn't have power down low it can't even move its weight. I probably bought the wrong 370 motor for my mn99

[@DeadlyBliss13]

The stock esc/receiver could be what’s letting you down. It has horrible low speed power.

[@froilandelacruz5493]

How is the stock esc after installing a 370 motor? is it still working?

[@ACeperienceRC]

So far, motor is working fine. Gearbox is recommended to change as well.

[@froilandelacruz5493]

@@ACeperienceRC how about the esc did it got burned?

[@ACeperienceRC]

Nope bro, so far my esc didn’t burned 😁

[@ronkemp9528]

Next step new gear box.

[@ACeperienceRC]

Yea, I’m upgrading it 😁😁 stay tuned bro

[@rafiqinherman8718]

whats esc you use?

[@ricowidhi2950]

Apakah itu motor 370 strong magnet?

[@fikiramadhani2061]

370 strong magnet in electronic stock? It's not recomended🤔

[@ACeperienceRC]

Boleh pakai, tapi gearbox x tahan. 🤣

[@fikiramadhani2061]

@@ACeperienceRC ompong la gear nya🤣

[@ACeperienceRC]

🤣

[@rictomas9540]

Is 390 motor applicable too?

[@rictomas9540]

And how many T are there? 31T 38T or 28T?

[@nolascosoriano3863]

can the stock receiver power it up sir?

[@ACeperienceRC]

Yes, for this video I’m using stock receiver board , kina powerful.

[@KIM91380]

Tahan air ga?

[@ACeperienceRC]

Air sampai tayar still boleh, klu banjir dlm air mng electric akan rosak, sb board ya x tahan air. Thanks for watching bro.

[@KIM91380]

@@ACeperienceRC kalo untuk dinamo 370 tahan air ga?

[@itjustalife1724]

how speed is it

[@ACeperienceRC]

It’s 15kmh, no doubt its torque improved a lot

[@bubblesrcshed]

Hey did you order #1 or #2 the speed change motor ? I don’t know which to order

[@ACeperienceRC]

Hi man, for your area I think the second one is more suitable, the first link is Shopee and mainly for South East Asia country :)

[@bubblesrcshed]

@@ACeperienceRC funny they don’t say that on Banggood it’s only mentions a #1 a D12 replacement or #2 speed change motor. Guess I’ll order #2 and hope for the best. Thanks for the information brother 👍👊👍

[@ACeperienceRC]

No prob bro!

[@toy_tractor_.jaat_life]

How buy for india 😭

[@ACeperienceRC]

we have share the link in the description, you can buy from AsiaRCdepot. i believe delivering to India is available.

[@toy_tractor_.jaat_life]

Ok

[@toy_tractor_.jaat_life]

Buy for mnd99s

[@ACeperienceRC]

thanks bro. it is really fun. :)

[@toy_tractor_.jaat_life]

Buy for AliExpress problem india chhattisgarh 😭😭😭😭😭😭

[@blinddragon360]

İts A 260 Gearbox?

[@ACeperienceRC]

Yes for this video, I’m using ori gearbox. It’s lasting also 😁

[@blinddragon360]

@@ACeperienceRC Except where it cuts in the video, there is no need to make a change, right?

[@blinddragon360]

@@ACeperienceRC It's like a bidet. When you attach the engine, the iron at the bottom remains short for the rear shaft. I would appreciate it if you could answer

[@ACeperienceRC]

Apologies for the late reply, yes the rear shaft was short after you change 370 motor. first couple of run it still good in condition, thereafter I sand the shaft to half flat and screw with a grub head screw.

[@scarys.1]

@@ACeperienceRC Well, if we don't do it like you do, can't we wear it?

[@ferdysambo0074]

Torsinya gede ga?