MST RMX 2.0 BOOSTED! with Hobbywing XD10 Esc & D10 10.5t motor!

[@RoadsideRC]

Daaaang! You went full-fancy on your electronics! Nothing but the best here! Subscribed!

[@KingsRC]

Thanks man! No regrets with the best 🤣.. thanks for joining the channel brother!

[@d0pedrag0n]

Great video and nice combo...I've been running the same motor and ESC for the last few weeks...really happy with it. One thing to note, cutoff voltage when set manually is not per cell. For a 2S pack you'd probably want to be around 6.8V.

[@KingsRC]

Oh right, il check that out.. thanks so much for pointing that out bro! And thank you for watching ☺️ stay tuned 👍👍👍

[@tonyallen8626]

Flysky gt5 radio has a programmable gyro and you can set it up to the way you like it, it's a great radio and it doesn't brake the bank.

[@chrisracer2007]

Could you compare it to the yokomo and accurance drift ESCs

[@g.b-MTB-trail-jumps3062]

Perfect combos champ...enjoy👑 Im use on max 8 combo.. 2050kv motor

[@KingsRC]

Yes brother! Thank you! These Hobbywing are such quality!

[@DJ.1001]

I'd recommend the xr10 stock spec over the xd10. Both have all of the same tuning options, the only downside being the xr10 is 80A instead of 100A. I highly doubt drift setup with a typical 10.5 motor are pulling anywhere near 80A. The xr10 is also alot smaller/lighter and saves you about $80.

[@Bordz_92]

Trash recommendation tba

[@DJ.1001]

@@Bordz_92 I've had Xr10 stock specs in both my chassis for a few months now. Not a single issue with either one. Both run over 20 degrees of turbo, neither ones gets even warm to the touch. There is zero reason to run the XD10 unless you like the look and are willing to waste $80 on the looks. Not to mention the larger footprint and more weight of the XD10.

[@Bordz_92]

@@DJ.1001 you might not have a single issue, but neither do I running an XD10 what you are looking at is almost 3 times the Peak/burst current limit over the StockSpec. Which won’t be noticeable to you until you are running a higher end higher output battery like a 130c LiHv battery. Your Xr10 couldn’t use that battery to its limit

[@NanceLvr]

I like your budget option... what servo you running DJ?

[@maxmixrc]

Wow great upgrade bro👍😊

[@KingsRC]

Thanks bro 😊

[@moereefer]

Sweet ESC. I wish they made for 1/8-1/5 scale boosted

[@KingsRC]

Bro, that would be mad!

[@DJ.1001]

pretty much all of the Hobbywing XeRun ESCs have all of the same tuning options. I have 2 XR10 stock specs in my drift cars, an XR8 Plus G2S in my drag car, and an XR8 sct in my 1/8 race buggy. They all have exactly the same turbo and boost settings.

[@runwithmikerc1047]

Nice Video Man, Loving the turbo sound.

[@KingsRC]

Thanks dude.. yeah im lovin the turbo. Just makes it more exciting to drive 😄👍👍👍

[@Fonzierc]

Very cool combo 🤘

[@rccartv898]

Great video👏🏽👏🏽

[@KingsRC]

Thank you so much! ☺️🤜🤛

[@alagadnisupermamatribucoma6474]

Nice toy

[@ganahankohnisupermama2041]

Nice!

[@freerangehuman7016]

How did the 25 degree boost timing with the 30 degree turbo timing work out for you ? Any over heating issues and are you still using those timing settings?

[@sugarcult9133]

Very helpful video....how big of a deal is to install the MB suspension arms ? Not able to find much resource on that topic. Also do you have any experience with Acuvance motor/esc? Wonder how it would compare with Hobbywing! Thanks....please bring more how to video's on RMX MST platform.

[@KingsRC]

The Mb arms i dont think its such a big deal..but it does help with more adjustibility and helps performance, althou i think you can also go with out it, regarding acuvance, i havent owned one. Although i do own the yokomo esc and motor.. which i think is great too..! I will have to get back to more drift videos 🙂 thank you for watching

[@ramos.nitrorc]

what is a good budget tx/rx you can recoomedn for the mst rmx?? also...do oyu see a big difference between this setup and the stock powertrain?? lmk...I have the rmx 2.0 and wanting to upgrade but only if there is a significant difference....

[@micahjared8082]

Great Vid, Brother! Do you think this would work well in a no prep drag? Have a Losi kit Im about to build, and will mostly run for fun at the smoothest lots as I find them around town. Alone or with a pal...nothing competitive yet.

[@KingsRC]

Thanks bro! I havent yet built a no prep drag so i dont wanna give a diffinitive answer as these kits are quite expensive to trial and not work... although with the capability of its programming and tuning it makes sense to run it in a drag car 🤔🤔🤔 set low rpm and boost up when it gets traction...

[@kangyurc-trial6641]

Good job nice bro 👍

[@KingsRC]

Thank you Kang yu ☺️🤜🤛👍

[@MZBallistic]

Did you change the can timing?

[@TheRCBuildersPost]

I love how we spend so much on our rc electronics and our phones are busted as shit 😂

[@KingsRC]

🤣🤣🤣🤣 I knew I wasnt alone!!!! 🤣🤣🤣

[@ColzaMania]

Have you kept the standard shafts when installing the MB suspension kit?

[@KingsRC]

Yes i have, thank you for watching 😊

[@mikeyroodbol3121]

How does it sound? Is it really screaming?.. or should i get a yokomo high rpm motor

[@KingsRC]

Yeah man it screams..

[@galangbhagaskara5976]

Hey man, I use the mst rmx 2.0 RTR, and I just new to rc drifting. I want to upgrade soon, do you know which things I should buy first for my upgrade?, thanks ^_^

[@KingsRC]

kzbin.info/www/bejne/pHPMlK2kf9aGoZY

[@KingsRC]

Check out my upgrades vid bro.. hopefully it helps u out. Thanks so much for watching 😊

[@galangbhagaskara5976]

@@KingsRC ahh yes thank you. I just watch it. But I have problem, its really hard to get the reve d servo here. Is there any another servo beside reve d that you would suggest?

[@KingsRC]

@@galangbhagaskara5976 can you get the yokomo servo? Any low profile drift spec servo may work good

[@galangbhagaskara5976]

@@KingsRC yes, i can get the yokomo sp-o3dp. Is that good?

[@MrKillerHobbes]

you bought the mb suspension upgrade i assume?

[@KingsRC]

Yes 😊

[@rommelasis5991]

Hi there, I am using the same combo but I use the 13.5T instead, what is the settings you recommend?

[@KingsRC]

Hey man, i only ever run 10t motors, but you could try the same settings and adjust accordingly as you drive the car..if u want more speed then maybe adjust the pinion also, let us know how you go and thanks for watching bro 🙂👍👍👍

[@ericosbourne248]

Where can I get the Bluetooth card. The thing that come in the clear case that you hook up to the motor and Bluetooth it to your phone to program. What’s it called and how can I find it I have found everything else about that and I am trying to build my RC car

[@KingsRC]

Hi Eric, here is where I bought mine.. its an Australian retailer. Where are you located? Thanks for watching and stay tuned 🙂 www.mrcplaza.com.au/products/hobbywing-ota-programmer

[@LutzMowinski]

Have you ever tried putting normal tires on the car to see how it handles as a rear-wheel drive touring car?

[@KingsRC]

I haven't actually..🤔🤔😅

[@LutzMowinski]

@@KingsRC would be kind of interesting 😉 I mean, I know these cars are made for drifting first and foremost, but with a motor in front of the rear axle it should also work as a "standard" TC 😎

[@KingsRC]

@@LutzMowinski i had some very grippy drift tyres on one time and all it does is understeer.. i think you really need 4x4 for touring, the weight on the drift cars is mostly at the back and just gives too much grip on the rear and not much at the front..

[@VaPOOrizeUxXx]

Idk why but I can not get my motor to active the turbo and boost I change all the settings like you did. I can’t figure out what I’m missing

[@KingsRC]

Did you save the settings? That all I could think of why it wouldnt work 🤔

[@Lildaica5]

What size or type of motor gear was used on hobbywing? T24?

[@KingsRC]

I used the stock gear that came with the mst rmx. Thanks for watching stay tuned!

[@Error-vy9iw]

I wonder if you can make this thing fast asf

[@hellraizer4820]

I have the same setup what size pinion did you use?

[@KingsRC]

Thanks for the sub bro! And watching the vids 👍👍👍, i used the stock pinion that came with it stock 😊

[@VaPOOrizeUxXx]

What is the name of the stealth mounts you have?

[@KingsRC]

Hey Jake, thanks for watching dude, the stealth mounts are Eagle racing magnet mounts. Heres a link to my other upgrade vids, there are links in the description of the upgrades. Stay tuned bro kzbin.info/www/bejne/pHPMlK2kf9aGoZY

[@Christianv1]

Did you have to customize the gyro at all to fit servo?

[@Christianv1]

Or was It plug and play

[@KingsRC]

Plug and play and just initial set up

[@Christianv1]

Okay awesome I got but seem that my steering is not aligned would you know how to fix that?

[@KingsRC]

@@Christianv1 center your trim on controller.. then adjust your servo horn as center as you can.. then refine adjust the trim on controller

[@Christianv1]

Thanks so much for the help thats a subscribe from me👍awesome content

[@jjzhan4080]

Hi! Is this able to use on HSP94123 flying fish ?

[@KingsRC]

Ive never owned a flying fish so i dont know how the drivetrain will handle all the power 🤔

[@jjzhan4080]

Ok! Thanks anyway

[@KingsRC]

No probs.. and thank you for watching 🙂 stay tuned bro

[@swissmiss5792]

Your wallet is crying in the corner. Ik mine was when I bought the same set up lol. Any reason for the lower motor position? Compared to the high position

[@KingsRC]

Yeah the wallet got a bit injured 🤣🤣🤣 but it'll recover.... Eventually lol. I honestly like the motor up the top as it helps it better with body roll as the weight is up top. But i had to keep the motor at the bottom coz I have a body i use that doesnt fit with the motor up top 😊, thanks for watching, please stay tuned to the channel 👍

[@swissmiss5792]

@@KingsRC i see.. we’ll the content is sure exciting bro. You got a sub from me 👍🏼

[@KingsRC]

@@swissmiss5792 thanks so much! Appreciate it 👍😊