Headlight Removal and Refitting - Peugeot 206

A step by step guide on how to remove and replace the headlight units on a 2002 to 2009 Peugeot 206. The part number for the left headlight is 9630869780 and for the right side its 9630869680. Some of these plastic clips and rivets are quite fragile and easily broken so be careful as you remove them. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@HaveIDyslexia12]

I don't even have a 206 and I still love watching these.

[@screwsnutsandbolts]

Thanks very much !

[@dorianmanto7513]

Man that is a wonderful guide! Takes a lot of time for your to create it. But it is very detailed and helpful. Greetings from Czech Republic:)

[@screwsnutsandbolts]

Thanks for watching ! :)

[@user-ek4tv8pf8v]

This is the best guide that I have seen - so well thought out and time taken to make it so clear. Well done.

[@screwsnutsandbolts]

Thank you !

[@markwilliams2830]

Phew! Got there in the end what a faff just to do this ? Why do the French make what should be a simple job so long winded ?With this job I would keep a supply of Trim Clips, and an old soldering iron handy in case I have to do a bit of Plastic Welding to any plastic I break ! Any way a great detailed description .Thanks

[@screwsnutsandbolts]

Thanks very much. Yeah I'm not actually sure why I bought a Peugeot again lol

[@maad33]

Thank you very much! With this video i could clean my headlight.

[@screwsnutsandbolts]

You're welcome !

[@s2504s]

Thanks, man! You are the BEST! You saved my day

[@screwsnutsandbolts]

You are welcome!

[@lola__dr3618]

this video helped me massively thank you !

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@jacek-jan]

FINALLY! In some cases there is not enough place to replace left H7

[@zbirmohmed7868]

Très bon travail .chapeau bas

[@screwsnutsandbolts]

Thank you !

[@jmsilvagm]

EXCELENT, great video.

[@screwsnutsandbolts]

Thank you !

[@raulanayagonzales2497]

Gracias por el toturial es de mucha ayuda! Gracias saludos .

[@screwsnutsandbolts]

You're welcome !

[@StromboliKicks]

Thank you so much for these videos. I hope you do something about the clutch in the future. Mine is feeling a bit "sticky" when I lift the foot.

[@screwsnutsandbolts]

I might not get to the clutch I'm afraid. I'll let you know if I do

[@Gogata1964]

Перфектна работа!👍

[@screwsnutsandbolts]

Thank you very much !

[@bretagnebartouxxx5394]

Thanks ❤

[@screwsnutsandbolts]

You're welcome 😊

[@marino6081]

Does peugeot 206 have headlights made of glass or plastic

[@screwsnutsandbolts]

I would assume they're made of plastic (Polycarbonate)

[@archiblanco]

Hello, very good video... luxury!... I have a Peugeot 206 1.9 diesel 2008, is it compatible with everything indicated?

[@screwsnutsandbolts]

Thanks, it should be similar

[@ThunderSky]

Hello, may I ask how to align the headlights on Peugeot 206? I can't find a good video showing it.

[@screwsnutsandbolts]

I don't have the 206 any more, sorry. This might help: asacannes.com/en/comment-regler-les-phares-de-ma-peugeot-206/

[@ThunderSky]

@@screwsnutsandbolts Thanks

[@Lepiratespagnol]

👌👍👏👏👏

[@screwsnutsandbolts]

Thanks !

[@rasoolnaderyan2745]

❤❤❤❤❤

[@screwsnutsandbolts]

Thanks !

[@gasgaspenguin1766]

👌

[@screwsnutsandbolts]

Thanks !

[@CrazyTechLab]

Got a really weird issue having replaced both headlight clusters. Neither dipped beam socket is working. Bulbs are fine, tried the old clusters and they no longer work on the dipped beam either. Also not the fuses which have separates for dipped and high beams. Any ideas?

[@screwsnutsandbolts]

It sounds like a blown fuse. Have you checked the fuses using this link ?. They seem to be in slightly different locations, depending on the year: fuse-box.info/peugeot/peugeot-206-1999-2008-fuses

[@CrazyTechLab]

@@screwsnutsandbolts Yeah unfortunately they’re both okay. It’s fuse 9 and 10 for left dipped beam and right dipped beam in the engine compartment fuse box. It’s a minor repair following a front collision so maybe something else is broken.

[@CrazyTechLab]

@@screwsnutsandbolts Turns out you need the engine running to have the dipped beams on this model. Problem solved! Thanks for the video

[@screwsnutsandbolts]

Oh of course, I'm glad one of us figured it out lol :)

[@charlescamellini4182]

Dismantle the entire front of the Peugeot 206 to change the headlights? Bible Time!!! No way! Review modern concepts!!! Brazilian method: There are three screws. Just move the mustache away, loosen the screw and two more at the top and be happy!!!

[@xXturbo86Xx]

What a terrible design. The 208 is even worse. You have to remove the entire bumper. Meanwhile you can remove the headlights of VWs by unscrewing the top bolts and pulling them out. German engineering can be very simplistic, or very complicated in the case of some BMWs....but French and Italian engineering....so annoying.

[@screwsnutsandbolts]

A lot of manufacturers seem to think it's a good idea to hide the 3rd mounting nut/bolt out of reach behind the bumper. It doesn't make sense.