Mustang Pedders Adjustable Coilover Kit eXtreme Xa 2005-2014 Installation

Product Link: www.cjponyparts.com/pedders-ad...
In this video, Bill & the crew at CJ's will show you how to install this Pedders eXtreme Xa Adjustable Coilover Kit on your 2005-2014 Mustang from the comfort of your own shop or garage!
Take the handling and performance of your S197 to the next level with this premium adjustable coilover kit from the masters at Pedders Suspension!
Delivering top-of-the-line results for both track and street, this kit fits your needs with absolute precision! Adjusting one to three inches lower than stock, showcasing thirty position adjustable rebound and compression, and featuring fortified alloy steel motorsport coils, this kit from Pedders is an incredible custom upgrade!
Boost your Mustang experience today and get back on the road in no time with the streamlined installation of this sensational coilover kit!
Check out more Mustang Coil Over Kit parts from CJ's here:
www.cjponyparts.com/mustang-co...
Check out more Pedders Suspension parts from CJ's here:
www.cjponyparts.com/pedders/c/...
Subscribe to CJ Pony Parts on KZbin here:
kzbin.info_c...

[@MarcusK408]

I finished installing these on my 2007 Mustang GT/CS yesterday. The install was easy but Pedders should've included the top mounts for the rear shocks shown at 10:05. There are some people such as myself that have aftermarket shocks/struts before switching over to coilovers like these. I had Tokico D-Specs and their rear shocks have larger upper mounting nuts which doesn't fit Pedders' rear shocks. Luckily, I found some nuts lying around in the garage that fit perfectly otherwise I would've had to postpone the completion of the install. Shame on Pedders for not mentioning this. By the way, out of the box, these coilovers will give you a heavily raked look. I planned accordingly from watching this video and reading Robert's comment at the bottom. I dialed the front up 1/2" and the rears down 1/2" before installing them.

[@79chevy901]

I love the stance of the mustang, damn that looks good!!!

[@C0mputerguy]

Great video.. really like the setup so far!

[@RobertKohut]

Looks like a great kit and certainly an easy install.

[@OctaneStreet]

Superb video gentleman. Think I'm going to be picking these up for my 06 next spring!

[@OctaneStreet]

Glad I kept my word, just picked them up think I'm going to wait until NEXT spring again though before installation since it's already fall now.

[@Wildjake1999]

Awesome video, helped out a lot

[@Knards]

Excellent vid. Beautiful car BTW

[@rangogt2340]

So if I lower it all the way and make it firm I still don't need the caster camber plates? Does it have its own strut mount? And does it come with warranty? Thank you

[@RobertKohut]

You didn't talk about what the drop was at Pedders recommended setting. Also you didn't mention the 'range of lower' you get with this kit. Also you didn't mention the pan hard bar and needing an adjustable one if dropping more than an inch. It seems their recommended setting lowered the front a great deal at their setting but kept the back too high. Then you lowered the rear to it's lowest and it seemed to level the car. Doesn't make sense since the front can be lowered even more but the back can't.

[@djrickygaz]

yeah man i'm completely with you on this. I'm currently frustrated as hell trying to figure all this shit out. Did you end up buying these coilovers? if so, what do you think about em?

[@goffdroid]

Might be hitting bump stops in back. I wanna know how low I can go. It can tuck in the rear it seems.

[@heebeejeebeez436]

@@goffdroid From the factory setting on the rear after installation , The Jounce stop is about an inch from the frame. I’m getting clunking sounds. Going back over all of it to make sure everything is tight, and the metal on metal is lithium greased (since I didn’t do that the first time.)

[@jsimmonstx]

what caster/camber plates can i use with these?

[@djrickygaz]

Hi can you create a more in-depth tutorial of how to adjust the rear please I’m having trouble with this I don’t know how you’re supposed to adjust the shock and the spring to raise or lower the car!!! Please help!

[@friendlysb]

Did you ever figure this out? I am struggling to find something.

[@itsmrkhan1]

Hi, I just ordered this!! would it be a good idea to get the 'Ford Performance Jounce Bumper Kit' with this setup?

[@OctaneStreet]

Did you ever get an answer to this question?

[@djrickygaz]

Yes

[@TylersHQ]

What's the point of the locking collar on the rear strut? Mine came loose as I didn't know I had to tighten it and made a loud thud over every bump

[@circusmonkey1663]

i wouldnt feel safe not changing out the cc. love my maximummotorsport ccs

[@DaShizNit80]

So to lower the rear, all I do is compress the spring? I dont have to touch the shocker do I?

[@leithdetail4638]

I THINK YOU HAVE TO ALSO ADJUST HEIGHT OF SHOCK WOULD BE NICE IF INSTRUCTIONS WERE MORE CLEAR ON HOW MUCH!

[@renuco612]

You will need to unbolt shock and take tension off the spring. Adjust the spring to the desired ride height, then jack up the spring to put pre-load on it. Then you will have to adjust the shock to line up with the bolt holes on the bottom of the shock. Someone please correct me if I'm wrong.

[@djrickygaz]

Shawn Brown I know right?! Those motherfuckers lol

[@djrickygaz]

renuco612 How do you know how much fucking preload to apply?!

[@ericswires8534]

Didn’t mention how to adjust the rear shock. Not the coil seat but the shock itself.

[@djrickygaz]

I know wtf I need help with the f’n rear too

[@djrickygaz]

Did you figure it out please help

[@ericswires8534]

DJ RICKY G I found a good video put out by LMR that shows the guy loosening the locking collar on the rear shock, grabbing the shock with both hands and spinning the threaded body clockwise. Just search for LMR Coilovers The video isn’t for Pedders brand but same basic idea.

[@HaikBoyadjian2]

how much is the drop without adjusting the height

[@brandonv4900]

Toque specs?

[@brandonv4900]

I stand corrected.

[@juliansaiz5714]

That back end is still high...

[@djrickygaz]

No shit lol

[@gorgonbazil2652]

Its not a real Shelby! why would you put the Shelby badges on a mustang GT Love the kit, hate "Poser cars"

[@robertswift6101]

huge difference in price between badges and a real shelby is the reason i went that route and all the extra money i saved was used in upgrades and still have money leftover