My FAVORITE Arrow Builds for the Mathews LIFT

[@Jack-z2f8c]

340 bloodsport onyx 10.2 gpi 31 inchs

[@henrybright8531]

Love the content, lots of great info. Just ordered a bow from your store

[@shanetrudell4061]

I’m loving my vap ss 400 definitely tightened my group’s with the new lift I was shooting black eagle carnivores

[@j.l.9092]

Your build is very similar to mine. 28.5" draw length @ 75# 450 grains, 27.75" 300 spine RIP TKO arrow, 30 g Podium insert, 125gr point, AAE Max Stealth x3. Halo nocks. 290 fps chrono. I'm very happy with the setup.

[@stacyhardin611]

If you cut your arrows carbon to carbon 2” less than your draw length and use a half out……. You will get maximum efficiency and consistency out of them.

[@saroruhagoswami9202]

Is this Arrow 's are effective in Africa 🌍 ???

[@jeffspencer7489]

Easton axis 5mm

[@wcwcgarner2717]

Easton axis 5mm shoot great out of my mathews.

[@dustinearnshaw4835]

Yep I shoot the 4mm

[@robturner2709]

I shot axis 5mm with my lift. They just didn’t shoot as well as the rip TKO do.

[@jeffspencer7489]

I second that. My Lift works perfectly with the 5mm axis. The key is you don’t have the garbage half outs.

[@blakeperkins9288]

Look I’m not trying to nitpick this video, but there is nobody that’s shooting a 29 inch arrow that isn’t like a 31 inch draw, I would do more like a 27 1/2 inch arrow because I’m a 29 1/2 inch draw and my arrow is cut at 27 1/4 inches. So I would probably rethink what the average Archery shooting unless you want the arrow to be sticking out two or 3 inches. But if that’s what you’re looking for, then I’m not gonna stop you from living your life.

[@blakeperkins9288]

Also, just having the diameter of a spine isn’t going to recover quicker. The only way that’s gonna help with that, is obviously having a stiffer arrow or knowing where the weak part or the stiff part of the arrow is knowing where the arrow is paradoxing in the most efficient way that’s way more important than recovery. So whether it’s a 166 or 204 or 246 they’re all gonna recover the same.

[@madman432000]

My arrows are 29.125 carbon and I have 29" draw, actually set bow at 29.25, and insert is just at front of riser.

[@jonathan_guerrero]

​@@blakeperkins9288agreed. I think it's a bit of an old school mentality to shoot an arrow 1 inch or more longer than your DL. There's no need for it. If you have proper hand placement you won't cut yourself with a broadhead. My dl is 27 inches and my arrows are cut to 26 and I love the way they came out.