My M5 Engine DIED - Here's why it FAILED.

It's with a heavy heart that I create this video. If you're an M5 owner, please be aware of this issue.

[@112hounddog]

So many people think the S63 doesn't have rod bearing issues smh. As an E60 M5 owner, who also does all the work on his BMW himself, I feel your pain

[@SJtoday52]

Man as a f90 owner I am fearful. I can only imagine the moment you found out. I wish I was mechanically inclined enough to do this much work myself in the unfortunate event this happens, but I don’t even have the tools to do it even if I wanted to try. Consider yourself blessed for having the means, knowledge and willingness to tackle such a job. Truly inspiring.

[@nijenskylowrie225]

As a BMW owner I feel bad for you bro. I can tell that you are heart breaking. I am glad you are getting the parable resolved. 🙏🏽

[@TinCanSailor]

I can't believe that I am early a year late to this. It is very hard to find good S63TU content like this. Sorry to hear of the trouble but you are a boss for taking this on.

[@jefflamb5343]

Jose, very sorry to hear about your significant rod bearing failure. However, glad to see you’ve decided to personally tackle the rebuild and take the time to share. Sounds like you already have a good plan in place for the crank, rod bearings and main bearings. Regarding using the stock rods and pistons, something to consider is using the F90 rods and pistons. I’ve heard they’ve been improved. You also should consider having the cylinder walls cleaned up using the techniques that are appropriate for Alusil blocks. This will help make sure your new piston rings will break in and seal properly.

[@Yes_Way_Jose]

Thank you for the comment Jeff. I did hear about the improved F90 pistons and I did consider it. I have actually sealed the engine already and i'm looking to release the rest of the videos soon. The cylinder wall and the block was resurfaced cleaned and inspected by a machine shop and I'll have a video about it soon.

[@MatthewJay80]

If you can swing it, go forged man. I loved my 2013 F10 M5, however, I started to have a lot of issues with mine around 27K miles. AC went out twice, coils kept going bad, the battery died twice in a year, many unexplainable non-major electrical gremlins, and finally my clutches went bad. This was a BMW CPO and I estimate 13-15K of warranty repairs went into the vehicle over my 2 1/2 years of ownership. I wanted to forge my motor, but I got tired of having warranty repairs done on my car. When my M5 wasn’t in the shop it was excellent to drive.

[@mainevententertainment603]

Man this made my day!! The fact that you tackled this on your own and are coming out on top, happy ending(thanks man!). Where did you go to learn this? I mean this specific engine. I’m looking at an f85 X5M and want want to buy a copart one just to wrench on it. That way I can babe a 2nd engine on stand by. Thoughts?

[@MrSamPhoenix]

I feel for you bro, either you have the money/warranty to deal with the inevitable issues… or you’re extremely handy with your hands and can perform the work yourself.

[@herlegz6969]

Glad you're rebuilding it and making it bettern How many miles did this have on it? Any indication what caused it?

[@jeremiahex]

Dang! Spun rod bearing. E60 M5 owner here: 2 actually. It also greatly depends on how the previous owner cared for it. Both of Mine sit at 45k miles. One purchased it from the original owner(77 year old man) who religiously took it to bmw for oil services, etc, etc: 2nd a collector. Service Paper trail history for both. The S63 engine is way more complex than the S85 and way more expensive. S54, S65, S85, S63, ( I’m sure I’m missing more) need rod bearing service. I’m sorry to hear what happened to you. Sucks 😢

[@PlatinumPaladin915]

Come great power from the M5, comes great care to the owner and responsibility.

[@rskylinej]

I applaud your approach and willingness to take the motor out and do everything yourself. I’m in the middle of a similar job with my x5M. 👏🏼

[@Yes_Way_Jose]

Best of luck, not the easiest motor to work on as you know.

[@anyimmichaelik]

How many miles do you have on your X5M?

[@rskylinej]

@@anyimmichaelik 30k but failed in previous owner’s hands. Now she’s good to go. Better than ever

[@jasonsun2251]

@@rskylinejhi did you replaced crankshaft and all the bearings？or a new engine？

[@rskylinej]

@@jasonsun2251 just wear items, bearings and pistons

[@stevesmith-xd3ph]

Man that sucks big time but I'm glad you're conquering the problem personally that's what you call tough love.. was finally able to get my dream car 03 E39 M5 109,000 miles that's the first thing I'm doing is rod bearings

[@Yes_Way_Jose]

Sweet M5, yeah definitely should first thing on the list.

[@lazarus8501]

I recently found metal shavings in my n55 engine. I took it to a shop and they found scoring on cylinder 1-5. They are gonna need to be re-sleeved so I might as well do forged internals and a big turbo while im there. I haven't looked inside but im guessing the cause of the shavings is rod bearings. typical pwg n55

[@billywelch4611]

F10 m5 is my favorite bmw ever, I feel for you and definitely enjoyed the content because as being an owner of one myself the content is scarce

[@Yes_Way_Jose]

Thank you. More videos coming soon.

[@zachlandry4575]

What software did you use to take apart the engine

[@khelangraham3071]

Question would the 2017 s63 M5 motor with it's technical upgrades, swap into a 2013 m5 manual???

[@Exposing.y0u]

Great video and I know exactly how you feel but I hope the outcome is praiseworthy! Make more videos

[@raymondpicazo435]

Hey brother that’s for you video. So I have a BMW 2014 M5 with 63,000 miles. The car is bone stock do you think I should change my rod bearings? I don’t drive the car that hard but you know sometimes I push it. BTW I don’t think you stupid for self diagnosing you car because obviously it’s cheaper to figure it out yourself and the F10 M5 is a beautiful car that we should keep on the streets. Thanks again for the content I appreciate it.

[@salmanmohammed5095]

I bought my dream car m5 competition 2019 and engine seized after 1 week of owning i feel you bro

[@dariusGarage]

Did you analyze why the engine failed on one piston in particular? Bent rod? This is a common issue on tuned F90s. I heard f10 engines suffer from rod bearing failures but always figured it was too long oil intervals or owners not topping up. What was your oil change interval and did it require top ups between changes? It definitely doesn't look like an oil pump failure since the other rods were not wiped out as well. I apologize for asking so many questions but it is always wisest to learn from other people's mistakes :)

[@anyimmichaelik]

I think its better to do the rod bearings before 90k miles. I did some research, checked out accidental auction. I noticed that every bmw f10 m5 with such issues have 100k miles and above. I think its best to take care of it as early as possible. I bought a 2013 m5 two months ago with 75k miles, i was trying to make sure am ahead with maintenance. That was the reason for my research.

[@manthatspeakstruth5402]

Sorry to here that.. Thanks for the informative content.. 4 BMW two N63 and two S63tu.. 750i 750Li M6 F12 AND JUST BOUGHT ONE MORE M6 being ship as I type.. This video scares me.. its definitely hit and miss when it comes to buying cars.. My 750li is I lost 15,000 just because it keeps breaking down.. I almost feel guilty trying to sell it..

[@Yes_Way_Jose]

Yeah, there are really similar engines. Stick to the TU but the best way is to monitor your oil but its a hit and-miss.

[@nakestraorchestra8142]

My e90 n46 went out early2023 the same way .I drove it to the mech who told me to get a replacement engine and the new engine much better a new breath of life. no issues with this one

[@WhiteBeardDetail]

Feel for you bud!

[@GamerFreak217]

When is the new video coming out?

[@justm514]

In the beginning of your video I felt bad for you but as the story went on it seems to be having a good ending! Great content keep up the good work! 👍🏽👍🏽👍🏽

[@TheMhannah100]

Did you end up building it?

[@tygibbs5724]

Salute tackling the s63 yourself.... I hate that motor 😒 with a passion. Strictly I6 turboed

[@Yes_Way_Jose]

Hahaha, I don't blame you.

[@nahidulkamran7072]

Personally swapped 4 s63 motors this year, try speaking to Troy the best s63 rebuilder

[@ganuv]

It’s always a BO when something like this happens but everything happens for a reason and for the best.

[@mikebelise7291]

Fait nous une vidéo au remontage de ton moteur ❤

[@skillz1855]

Would've been great without the background music

[@eddieolong]

Lol the music. BMW rod bearings can be a bitch.

[@mrd.g.2567]

You should by tesla model 3 standart range with rear wheel drive. Amazing car! traded-in my F10 BMW with tesla and never looked back. Its not worth your time fixing that oil burning trash can.

[@boostedwithshane4038]

I wish people would stay away from t)3 s65tu engines there made out of pretzels for sure

[@terminator4974]

F

[@maxislate5741]

You should buy a new engine , or make one yourself and save the car

[@Yes_Way_Jose]

Went the rebuild route

[@johnnytacosauce]

Thank god i went away from bmw and got myself into a domestic way more reliable

[@Yes_Way_Jose]

hahaha, I can't blame you.

[@jd-jw8hm]

Ah yes..another Break My Wallet/ rod bearing fiasco..🙄.. BMW cant seem to learn the lesson, even after DECADES of the same 💩... The engineering dept that CONSISTENTLY reproduces this issue..should be unemployed.. or retrained by Toyota..🙄..

[@champt7189]

Listen . My M5 passed away the day I used arco gas for the first time . Got on to the freeway and had to get right off . Fuel injectors MALFUNCTION made the engine get to hot to where The engine seized as I was accelerating. Now Heres where you fucked up. Sometimes in life, there's going to be a time where you have to use those 2 round things hanging between your legs called BALLS . Using those and taking a chance can actually get you to a better spot. I waited 6 months for it to finally rain in California . I used that as a excuse on my insurance claim that my M5 had traveled through a flooded intersection on the highway. I got it towed to a shop where he was able to pull the plugs and add water inside for the adjuster. Insurance came through and paid my car off and handed me a check for 10k . Now I'm driving a M6. I bet your buddies knew that but they seen the soft in you to even give it a try . NO is the worst thing they can tell you . If there's a will, there's a way and sometimes you have to play a roll to not end up back at ground zero making a video saying your dream car is gone and don't think I'll get another one . Don't act like a mustang driver if your in a M performance hustler. ✌️

[@BulletsGarage]

Man so much love for showing this video. Are you going to post all the videos of you taking the engine out of the car and all that. I just bought a m5 2016 58k miles. Do you have an instagram so I can message you ? My bottom end was replaced by the previous owner by bmw cuz it was under warranty for a knock. So my engine has 30k miles on it now. But ur a hero to so many of us doing this alone. I would do it alone also so all the info u will give us I’ll take for sure

[@GeorgetteMiller]

@carninja